💾 Archived View for hispagatos.org › post › chikiminetime-v2 › index.gmi captured on 2023-12-28 at 15:20:18. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Help support Hispagatos by mining v2

HOW TO - MINE LIKE A GATO

Here is an updated version 2 of our previous quick tutorial on how to help support Hispagatos by running cryptocurrency mining software. The software has changed and the mining ports have changed so we bring you the latest.

Getting Started

Welcome to a step-by-step Monero (XMR) miner tutorial brought to you by your local gatos y gatas. This was tested with Arch Linux meow and updated last on February 20, 2021.

Installing & Initial Setup

Install MoneroOcean's xmrig fork from AUR with paru.

```shell script

$ paru xmrig-mo

```

For the best mining optimization, install msr-tools [1] from AUR with paru.

```shell script

$ paru msr-tools

```

The mining information we have is:

```

Mining pool: gulf.moneroocean.stream

Mining port: 10128

Mining address: 4AYprKT26fnZYdY1JjKLMR2K7zmCQhe9i5bn5oMV4VtEYvjiFhhXLVq8iycHRLTr6cD3oVSq19Yrx4JfmuuaU453M8GzTKb

```

*Note: if you have an "Old CPU/GPU" then use port 10032 instead. If it is ancient, then refer to their website help section*

Now to configure xmrig.

```shell script

$ sudo cp /etc/xmrig-mo/xmrig-mo.conf.example /etc/xmrig-mo/xmrig-mo.conf

$ sudo vim /etc/xmrig-mo/xmrig-mo.conf

```

Enter the info we have in the config file as follows:

- Change "url" to our Mining pool:Mining port.

- Change "user" to the Mining address.

- Change "pass" to the miner name you want.

- Keep the other values in "pools" section unchanged.

So we would have these values in the config now:

```

"url": "gulf.moneroocean.stream:10128",

"user": "4AYprKT26fnZYdY1JjKLMR2K7zmCQhe9i5bn5oMV4VtEYvjiFhhXLVq8iycHRLTr6cD3oVSq19Yrx4JfmuuaU453M8GzTKb",

"pass": "killab33z",

```

Note: To learn more about how the MoneroOcean pool works, you can visit the [MoneroOcean's FAQ] (https://moneroocean.stream/user/help/faq.html). Their FAQ explains that the pool will auto switch to mine Monero, and other similar coins, and will still yield Monero in the end. RTFM their FAQ for more info.

Also, on [Reddit] (https://www.reddit.com/r/MoneroMining/comments/f9p3q3/moneroocean_pool_now_support_mining_to_onion/fitv02q/) a MoneroOcean admin states:

```

"Algo switching works by modifying miner so it will benchmark algos on your system and provide this algo perf data to the pool, so pool can always give your miner the best profit coin jobs. Pool uses exchange to auto trade all coins to monero to pay it to miners."

```

Set your desired log file location in the config (below with example):

```

"log-file": "/tmp/xmrig-mo.log",

```

Now to setup your miner to use a CPU and/or a GPU to mine.

Setup CPU Mining

For the CPU miner setup, make sure the following is contained in the config:

	"cpu": {
		"enabled": true,
		
	"opencl": {
		"enabled": false,
		
	"cuda": { 
		"enabled": false,

Setup GPU Mining

The following are my findings, but RTFM to be sure:

AMD GPU

AMD GPU Pre-req

Install the required OpenCL drivers for this to work from AUR:

	$ paru opencl-amd

AMD GPU xmrig-mo.conf changes

For AMD-based GPU, make sure the following is contained in the config:

	"opencl": {
		"enabled": true,
		
	"cuda": { 
		"enabled": false,

Nvidia GPU

Since I do not have any Nvidia GPUs to test, we look to the XMRig Configuration Wizard [2] to learn what needs to be changed. The following are my findings, but RTFM to be sure:

For Nvidia-based GPU, make sure the following is contained in the config:

	"opencl": {
		"enabled": false,
		
	"cuda": { 
		"enabled": true,

Start the miner

Then we use the package's built in user account and systemd script:

```

$ sudo systemctl start xmrig-mo.service

```

Then tail your log file to see the Hash rate or to see if anything failed.

Some troubleshooting

Q1: After running xmrig-mo, the CPU hits 100%! How do I change that?

A1: Try changing the 'max-threads-hint option to 75 instead of the default 100

Q2: With AMD GPU, I get the following error: "disabled (selected OpenCL platform NOT found)"

A2: Make sure you install the pre-req above, the opencl-amd package

And then...

To see it in the mining pool, go to https://moneroocean.stream/#/dashboard and add the above Mining (XMR) address and you can see your miner and the stats, etc.
If you need to re-perform xmrig's algorithm performance tester, then start again from the "xmrig-mo.conf.example" file like in this tutorial
You can also check all the available port numbers which can be used in the Help Section of the MoneroOcean's website [3] as there isn't a separate link anymore.

Anything else...

If there is anything else I missed then let me know. Shouts out to all Hispagatos, all 2600 cats, and all the Fediverse family. And as always -> RTFM, hack the system & enjoy life! - Killab33z ^_^

https://hispagatos.org

References

[1] msr-tools (https://archlinux.org/packages/community/x86_64/msr-tools/)

[2] XMRig Configuration Wizard (https://xmrig.com/wizard)

[3] MoneroOcean's website (https://moneroocean.stream/)

Hackea el sistema! Los grupos anarquistas de hacking: <no value>

Libertad del software es descentralizar el poder: <no value>

Hackernol Novedades: <no value>

---

← Newer: Git Send Mail

→ Older: Ya_es_hora

 █████ █████ █████ █████ █████ █████ █████ █████
░░░░░ ░░░░░ ░░░░░ ░░░░░ ░░░░░ ░░░░░ ░░░░░ ░░░░░

Hispagatos is an Anarcho Hacker collective[1] that resolves around the Hacker ethic[2] of Steven levy and Libertarian Socialism ideas.

We work hard to preserve hacker culture, decentralization,security and privacy in cyberspace and also motivate towards an horizontal and non hierarchical techno-anarcho-communist society (TACS) where technology is made by people for the people not by corporate masters to control people. a(A)a

1: Anarcho Hacker collective

2: Hacker Ethic

3: Libertarian Socialism

[donate using LiberaPay](https://liberapay.com/Hispagatos/donate)