💾 Archived View for mirrors.apple2.org.za › archive › www.textfiles.com › apple › DOCUMENTATION › pa… captured on 2024-08-19 at 03:12:00.
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
THE PAINTER V3.1
(W) Written in 1984 by THE FAMOUS GUMBY
---------------------------------------
THE PAINTER is a powerfull utility that allows you to write your name on hi-res pages that don't show up in the catalog of a disk.
Here are some examples:
Donkey kong, Aztec, Dark crystal, etc..
COMMANDS
--------
The (ESC) key toggles between the text page and the hires screen.
The Main Menu
-------------
Once THE PAINTER program is booted, you will be presented with the main menu.
Here are some fonctions:
C: Clears the current hi-res screen.
L: Loads a hi-res page from disk.
S: Saves a hi-res screen to disk.
R: Reads data from the disk in drive 1.
W: Writes data to the disk in drive 1.
P: Parameters ( more on that later ).
;: Reads tracks by steps of 2.
-: Reads sectors by steps of 2.
When loading or saving a hi-res page, you can see a catalog of the drive by pressing the letter C (as a file name) and pressing the (RETURN) key.
The Parameters Menu
-------------------
Once you press P from the main menu,you will be brought to the parameters menu.
To return to the main menu,simply press the (space) bar.
As in the main menu, (ESC), ;, -, R, W, will retain their functions.
You can move the cursor by using either arrow keys ( <- -> ). The (return) key is used to select the options.
Start trk: Starting track to read data.
Start sec: Startinc sect. to read data.
Trk stat.: Increment or decrement by 1.
Sec stat.: Increment or decrement by 1.
Save prms: Saves the parms to the disk.
Load prms: Loads the parms to the disk.
Slot : Always slot 6.
Drive : Toggles between 1 or 2.
Note: Raw data will always be read from drive 1 and dos 3.3 parameter and hi-res files from either drive.
As always, inputing the letter C, will show you a catalog of the current drive
And now... how to work the thing.
Once the disk has been cracked , put it in drive 1, then press the (ESC) key to see the hi-res page.
Press R ( to read raw data from disk ). If you see no part of the hi-res page , press the ';' key to read the next two tracks.
Repeat this until you see part of the hi-res picture. Then press P and note what track it's on.
You can fine tune the picture by changing the sector number.
Once you have the full hi-res page on the screen, save the parameters to disk and save the screen also by choosing S from the main menu.
( you can now alter / modify the saved screen with your favorite graphic program. )
Once that's done, reload the parameters and the saved file and press W to write it back to the disk as raw data.
note: if the loaded picture is reversed on the screen , change the status of the track and sectors.
Some examples
-------------
ZAXXON: TRACK : 16
SECTOR : 06
TRK STATUS : Decrement
SECT STATUS : Decrement
DONKEY: TRACK : 13
KONG SECTOR : 07
TRK STATUS : Decrement
SECT STATUS : Decrement
HAVE FUN!
----------------------------------------I'M GUMBY. DAMMIT!