💾 Archived View for mirrors.apple2.org.za › archive › www.textfiles.com › apple › CRACKING › wiz4cod… captured on 2024-08-19 at 03:04:25.
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
Wizardry IV Codes
I. File: Wiz4CodesProgram.zip
Wiz4code is a QBASIC program which
accepts the 12-digit "Mordor Card"
codes and returns the correct 4-digit
code needed to continue play.
This program can be run in a separate window
while the AppleWin A2 emulator is running.
I tried starting it while AppleWin was
running a game-- it worked fine and the
game continued running on AppleWin.
To use, unZip using WinZip. You will get a
folder which includes the QBASIC program,
a Readme text file, and other stuff to run
the program.
Follow directions in the Readme file.
II. File: WIZ4CODES.DSK
This is the Wiz4code program in Applesoft
on a bootable ProDOS disk image.
The idea was that the dsk could be booted
on AppleWin started up after AppleWin had
been started up to run Wizardry IV-- i.e.
you would have two AppleWins running at
once and be able to use one to give you
the codes.
It does not work for 2 AppleWins. (AppleWin
bombs.) It _may_ work if some other A2
emulator is started-- i.e. you run Wiz IV
under AppleWin and boot the dsk on some
other A2 emu program.
Of course, the .dsk file can be transferred
to a real Apple II, converted to diskette
form using DSK2FILE or ASIMOV and booted on
an Apple II. You could get code answers from
your Apple II while playing Wizardry IV on
your PC or Mac A2 emulator.
III. Wizardry IV Codes List
This is the list of codes produced by
Bob Colbert and printed in Computist
along with directions for using the list.
If you do not mind pencil and paper
figuring, you can use this list.
The Mordor Charge Card number in the
questions consists on three 4-digit
numbers for a total of 12 digits
such as ...
2338-1753-2451
What you do is find the three 4-digit
code numbers (Code #1, Code #2, and
Code #3) in the Left side of each
column. In each case, you jot down
the associated number in the Right side
of the column. This gives you three new
4-digit numbers.
Example:
In Code #1 Col: 2338 --> 6375
In Code #2 Col: 1753 --> 6704
In Code #3 Col: 2451 --> 8981
(The example codes are marked with an *
in the list.)
Next, you add the three new numbers.
6375
6704
8981
+______
22060
If the result has more than 4 digits,
you subtract 9000. If this result has
more than 4 digits, you subtract 9000
again-- you keep subtracting 9000 until
you get just 4 digits.
The 4-digit result of all this is the
code you need to enter.
In the example, you need to subtract 9000
from 22060 twice to get a 4-digit number.
What you get is 4060. This is the
code you would need to type in.
Code #1 Code #2 Code #3
column column column
L R L R L R
1 1080-8771 1086-0000 1193-0000
2 1211-1280 1219-1488 1282-8510
3 1386-6528 1516-7814 1529-9475
4 1556-8090 1588-9399 1602-1451
5 1607-9125 1669-1330 1712-9012
6 1735-8696 *1753-6704 1757-8556
7 2138-4261 2194-9354 2219-8449
8 2293-1026 2301-7565 2313-9190
9 *2338-6375 2362-3161 2377-8896
10 2395-6353 2437-6150 *2451-8981
11 2470-3160 2480-2293 2770-8866
12 2788-2544 2800-1764 2812-9871
13 2892-5107 2897-4925 2910-1315
14 2919-3105 2922-3479 2941-1190
15 2990-1102 3014-5023 3032-8839
16 3137-3205 3243-8265 3278-9832
17 3303-6727 3369-7684 3414-9682
18 3463-4306 3538-7509 3547-1065
19 3587-7452 3779-6269 3816-1374
20 3852-4943 3868-3350 3996-9299
Rubywand, 1998