💾 Archived View for spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0246.tb captured on 2023-11-14 at 13:34:41.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
AST RESEARCH TECHNICAL BULLETIN TB-0246 11/19/86
AST-3G PLUS/MEMORY ERROR MESSAGE
A problem has been discovered when using AST-3G Plus
emulation when the board is installed in IBM Model 339 AT or
compatible PC's. This problem could occur in either "CGA"
or "HERCULES/PREVIEW" emulation modes.
The problem occurs when the PC is warm booted. On a cold
boot the problem does not occur. Depending on the type of
machine, either the message "CONFIGURATION TOO LARGE FOR
MEMORY" or "PARITY CHECK TWO" will appear after a warm boot.
The PC will "lock" and will have to be powered down.
To prevent this from occuring, AST-3G diagnostics diskette
version 2.26 is required. After cold booting the machine,
run the program "EMUL ON", which is contained on the
diagnostics diskette. This will load a keyboard intercept
routine, which will prevent the memory error from occuring
after a warm boot. This program must be run every time the
machine is powered on to prevent the recurrence of the
problem.