💾 Archived View for spam.works › mirrors › textfiles › programming › ansicode.pro captured on 2023-11-14 at 11:47:21.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
ANSI CODES DIMYSTIFIED ---------------------- Cursor Position ESC [#;#H Moves cursor to the position specified by the parameters. The first parameter is the line number, and the second is the column number. If no parameter is given, it moves the cursor to the home position. Cursor Up ESC [#A Moves the cursor up one line without changing columns. The value of # determines the lines to move up. The default value for # is one. Cursor Down ESC [#B Same as Cursor Up, except it moves the cursor down. Cursor Forward ESC [#C Moves the cursor forward one column without changing lines. The value of # determines the number of columns moved. Cursor Backward ESC [#D Same as cursor forward, except it moves the cursor backward. Horizontal and Vertical Position ESC [#;#f Same as cursor position. Device Status Report ESC [6n The console driver will output a CPR sequence on reciept of DSR (See below). Cursor Position Report ESC [#;#R The CPR sequence reports the current cursor position through the standard output device. The first parameter specifies the current line and the second parameter specifies the current column. Save Cursor Position ESC [s The current cursor position is saved. This cursor position can be restored with the RCP sequence. Restore Cursor Position ESC [u Restores the cursor to the value it had when the console driver recieved the Save Cursor Position sequence. Erase Display ESC [2j Erases all of the screen and the cursor goes to the home position. Erase in Line ESC [k Erases from the cursor to the end of line and includes the cursor position. Set Graphics Rendition ESC Sets the character attribute specified by the parameter(s). All of [#;...;#m the following characters will have the attribute according to the parameter(s) until the next occurrence of SGR. 0 All attributes Off (normal white on black). 1 Bold On (high intensity) 4 Underscore on (IBM Monochrome Display Only) 5 Blink On 7 Reverse Video On 8 Cancelled On (invisible) 30 Black foreground 31 Red foreground 32 Green foreground 33 Yellow foreground 34 Blue foreground 35 Magenta foreground 36 Cyan foreground 37 White foreground 40 Black Background 41 Red Background 42 Green background 43 Yellow Background 44 Blue background 45 Magenta background 46 Cyan background 47 White background Set Mode ESC [=#h Invokes the screen width or type specified by the parameter. ESC [=h ESC [=0h 0 40x25 black and white ESC [?7h 1 40x25 color 2 80x25 black and white 3 80x25 color 4 320x200 color 5 320x200 balck and white 6 640x200 black and white 7 wrap at end of linte (typing past end-of-line results in new line) Reset Mode ESC [=#I Parameters are the same as above except that parameter 7 will reset ESC [=I wrap at end-of-line mode (characters past end-of-line are thrown ESC [=0I away) ESC [?7I