💾 Archived View for spam.works › mirrors › textfiles › phreak › security.txt captured on 2023-11-14 at 11:26:28.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
*************************************************************** ** ** ** A Paper on "The Security of UNIX" by Dennis M. Ritchie. ** ** Aquired by Weapons, Distriubted by THUGS. ** ** A Solsbury Hill Text File. ** ** ** *************************************************************** On the Security of UNIX Dennis M. Ritchie Recently there has been much interest in the security aspects of operating systems and software. At issue is the ability to prevent undesired disclo- sure of information, destruction of information, and harm to the functioning of the system. This paper discusses the degree of security which can be provided under the system and offers a number of hints on how to improve security. The first fact to face is that was not developed with security, in any realistic sense, in mind; this fact alone guarantees a vast number of holes. (Actually the same statement can be made with respect to most systems.) The area of security in which is theoretically weakest is in protecting against crashing or at least crippling the operation of the system. The problem here is not mainly in uncritical acceptance of bad parameters to system calls- there may be bugs in this area, but none are known- but rather in lack of checks for excessive consumption of resources. Most notably, there is no limit on the amount of disk storage used, either in total space allocated or in the number of files or directories. Here is a particularly ghastly shell sequence guaranteed to stop the system: while : ; do mkdir x cd x done Either a panic will occur because all the i-nodes on the device are used up, or all the disk blocks will be consumed, thus preventing any- one from writing files on the device. In this version of the system, users are prevented from creating more than a set number of processes simultaneously, so unless users are in collusion it is unlikely that any one can stop the system altogether. Howev- er, creation of 20 or so CPU or disk-bound jobs leaves few resources available for others. Also, if many large jobs are run simultaneously, swap space may run out, causing a panic. It should be evident that excessive consumption of disk space, files, swap space, and processes can easily occur accidentally in malfunctioning programs as well as at command level. In fact is essentially defenseless against this kind of abuse, nor is there any easy fix. The best that can be said is that it is generally fairly easy to detect what has happened when disaster strikes, to identify the user responsible, and take appropriate action. In practice, we have found that difficulties in this area are rather rare, but we have not been faced with malicious users, and enjoy a fairly generous supply of resources which have served to cushion us against accidental overconsumption. The picture is considerably brighter in the area of protection of information from unauthorized perusal and destruction. Here the degree of security seems (almost) adequate theoretically, and the problems lie more in the necessity for care in the actual use of the sys- tem. Each file has associated with it eleven bits of protection information together with a user identification number and a user-group identification number (UID and GID). Nine of the pro- tection bits are used to specify independently permission to read, to write, and to execute the file to the user himself, to members of the user's group, and to all other users. Each pro- cess generated by or for a user has associated with it an effec- tive UID and a real UID, and an effective and real GID. When an attempt is made to access the file for reading, writing, or exe- cution, the user process's effective UID is compared against the file's UID; if a match is obtained, access is granted provided the read, write, or execute bit respectively for the user himself is present. If the UID for the file and for the process fail to match, but the GID's do match, the group bits are used; if the GID's do not match, the bits for other users are tested. The last two bits of each file's protection information, called the set-UID and set-GID bits, are used only when the file is executed as a program. If, in this case, the set-UID bit is on for the file, the effective UID for the process is changed to the UID as- sociated with the file; the change persists until the process terminates or until the UID changed again by another execution of a set-UID file. Similarly the effective group ID of a process is changed to the GID associated with a file when that file is exe- cuted and has the set-GID bit set. The real UID and GID of a process do not change when any file is executed, but only as the result of a privileged system call. The basic notion of the set-UID and set-GID bits is that one may write a program which is executable by others and which maintains files accessible to oth- ers only by that program. The classical example is the game- playing program which maintains records of the scores of its players. The program itself has to read and write the score file, but no one but the game's sponsor can be allowed unres- tricted access to the file lest they manipulate the game to their own advantage. The solution is to turn on the set-UID bit of the game program. When, and only when, it is invoked by players of the game, it may update the score file but ordinary programs exe- cuted by others cannot access the score. There are a number of special cases involved in determining access permissions. Since executing a directory as a program is a meaningless operation, the execute-permission bit, for directories, is taken instead to mean permission to search the directory for a given file during the scanning of a path name; thus if a directory has execute per- mission but no read permission for a given user, he may access files with known names in the directory, but may not read (list) the entire contents of the directory. Write permission on a directory is interpreted to mean that the user may create and delete files in that directory; it is impossible for any user to write directly into any directory. Another, and from the point of view of security, much more serious special case is that there is a ``super user'' who is able to read any file and write any non-directory. The super-user is also able to change the protec- tion mode and the owner UID and GID of any file and to invoke privileged system calls. It must be recognized that the mere no- tion of a super-user is a theoretical, and usually practical, blemish on any protection scheme. The first necessity for a secure system is of course arranging that all files and direc- tories have the proper protection modes. Traditionally, software has been exceedingly permissive in this regard; essentially all commands create files readable and writable by everyone. In the current version, this policy may be easily adjusted to suit the needs of the installation or the individual user. Associated with each process and its descendants is a mask, which is in ef- fect with the mode of every file and directory created by that process. In this way, users can arrange that, by default, all their files are no more accessible than they wish. The standard mask, set by allows all permissions to the user himself and to his group, but disallows writing by others. To maintain both data privacy and data integrity, it is necessary, and largely sufficient, to make one's files inaccessible to others. The lack of sufficiency could follow from the existence of set-UID pro- grams created by the user and the possibility of total breach of system security in one of the ways discussed below (or one of the ways not discussed below). For greater protection, an encryption scheme is available. Since the editor is able to create encrypt- ed documents, and the command can be used to pipe such documents into the other text-processing programs, the length of time dur- ing which cleartext versions need be available is strictly limit- ed. The encryption scheme used is not one of the strongest known, but it is judged adequate, in the sense that cryptanalysis is likely to require considerably more effort than more direct methods of reading the encrypted files. For example, a user who stores data that he regards as truly secret should be aware that he is implicitly trusting the system administrator not to install a version of the crypt command that stores every typed password in a file. Needless to say, the system administrators must be at least as careful as their most demanding user to place the correct protection mode on the files under their control. In particular, it is necessary that special files be protected from writing, and probably reading, by ordinary users when they store sensitive files belonging to other users. It is easy to write programs that examine and change files by accessing the device on which the files live. On the issue of password security, is probably better than most systems. Passwords are stored in an encrypted form which, in the absence of serious attention from specialists in the field, appears reasonably secure, provided its limitations are understood. In the current version, it is based on a slightly defective version of the Federal DES; it is pur- posely defective so that easily-available hardware is useless for attempts at exhaustive key-search. Since both the encryption al- gorithm and the encrypted passwords are available, exhaustive enumeration of potential passwords is still feasible up to a point. We have observed that users choose passwords that are easy to guess: they are short, or from a limited alphabet, or in a dictionary. Passwords should be at least six characters long and randomly chosen from an alphabet which includes digits and special characters. Of course there also exist feasible non- cryptanalytic ways of finding out passwords. For example: write a program which types out ``login:'' on the typewriter and copies whatever is typed to a file of your own. Then invoke the command and go away until the victim arrives. The set-UID (set-GID) no- tion must be used carefully if any security is to be maintained. The first thing to keep in mind is that a writable set-UID file can have another program copied onto it. For example, if the super-user command is writable, anyone can copy the shell onto it and get a password-free version of A more subtle problem can come from set-UID programs which are not sufficiently careful of what is fed into them. To take an obsolete example, the previous ver- sion of the command was set-UID and owned by the super-user. This version sent mail to the recipient's own directory. The no- tion was that one should be able to send mail to anyone even if they want to protect their directories from writing. The trouble was that was rather dumb: anyone could mail someone else's private file to himself. Much more serious is the following scenario: make a file with a line like one in the password file which allows one to log in as the super-user. Then make a link named ``.mail'' to the password file in some writable directory on the same device as the password file (say /tmp). Finally mail the bogus login line to /tmp/.mail; You can then login as the super-user, clean up the incriminating evidence, and have your will. The fact that users can mount their own disks and tapes as file systems can be another way of gaining super-user status. Once a disk pack is mounted, the system believes what is on it. Thus one can take a blank disk pack, put on it anything desired, and mount it. There are obvious and unfortunate consequences. For example: a mounted disk with garbage on it will crash the system; one of the files on the mounted disk can easily be a password-free version of other files can be unprotected entries for special files. The only easy fix for this problem is to for- bid the use of to unprivileged users. A partial solution, not so restrictive, would be to have the command examine the special file for bad data, set-UID programs owned by others, and accessi- ble special files, and balk at unprivileged invokers. $