💾 Archived View for spam.works › mirrors › textfiles › phreak › macsbug.phk captured on 2023-11-14 at 11:22:27.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
MacsBug Tricks
Cool MacsBug Tricks
By Macneil Shonle
This guide is to help you in learning to use MacsBug. MacsBug is a system
extension that can help you debug your programs, it is free and is
available
from Apple Computer. Note that the name MacsBug is an acronym for
Motorola
advanced computer systems debuger.
This guide is a list of "tricks," but it is just the tip of the iceberg
of
the cool stuff you can do. The guide will start off with some easy topics
aimed towards beginners and then it will go into some more advanced
topics.
All of them are cool. Hopefully after reading this the help part of
MacsBug
won't be so intimidating.
Number Conversion
MacsBug can be used as a quick hexadecimal to decimal converter, and vise
versa. I used to use a calculator DA, but now I just simply drop into
MacsBug and type in the number I want to convert and hit return.
Example: You want to find out what 0x3E is in decimal. When in MacsBug,
type
in $3E and hit return. This will be the output:
$3E = $0000003E #62 #62 '***>'
The first number ($0000003E) is the value in hexadecimal that you just
typed in. The second number is what the value is as an unsigned decimal,
the third is the signed version. The set of characters in single quotes
('***>') is
the ASCII representation of the number, the null character is denoted
with
the bullet.
You can find out the decimal/hexadecimal equivalent of any ASCII
character
by typing the letter balanced between two single quotes.
Example: Type in: 'A' and hit return. You will get #65 as your answer.
By the way-The dollar sign means that the number is in hexadecimal. Much
like C's 0xXX notation, $XX is how hexadecimal numbers are represented in
assembly. Numbers in MacsBug will default to hexadecimal, except for when
the hexadecimal number is a command or a regster. For example: "ea" is
the
command to restart the current application, when you type in ea it will
try
this command, you must type in $ea in order to avoid this conflict.
Similarly, you have to type a # in order to express decimal numbers. You
can
use the conversion method just described (type in the number, hit return)
to
find out a decimal number's corresponding hexadecimal number and ASCII
character.
What Was My Monitor Size?
Here's an impresive way to show a friend how many pixels horizontally and
vertically they have on their monitor (other than looking at the manual,
or something silly like that). Drop into MacsBug and type in: dm
@@MainDevice GDevice. This will show you the struct members of the
MainDevice (which happens to be a GDevice), you should see the gdPMap
indented, three lines below it will be bounds with four numbers to the
right of it. These four numbers are the top, left, bottom and right
coordinates of the monitor, respectively.
The dm command is short for display memory, after you type in dm type in
the address of the memory you want to display. MainDevice is a system
global that is a handle (a pointer to a pointer) to the main graphics
device (the one with the menu bar). The two @@ symbols are how you
express
double-indirection in MacsBug, in C you use "*" to express indirection
(i.e.
de-referencing) which is in put in prefix notation. People who program in
Pascal can use the postfix indirection notation by saying "dm
MainDevice^^
GDevice".
After you give the dm command the address, you give it the format you
want
to see it diplayed as. You can use any number for the number of bytes you
want displayed, or you can say "Rect", for instance, to see the first
eight
bytes of the memory in the form of a rectangle. You can also use: Byte,
Word, Long, SignedByte, SignedWord, SignedLong, UnsignedByte,
UnsignedWord, UnsignedLong, PString, CString, and PixMap, GDevice,
RGBColor, CGrafPort and any number of other templates you may have
installed.
Example: if you know a rectangle is at address $00058EA6 and you want to
see what its value is, all you have to do is type in "dm $00058EA6 Rect".
By the way?A template a layout of memory that MacsBug knows about (such
as a C struct or a Pascal record), you can type "tmp" to find out all of
the
templates your version of MacsBug has.
Don't you hate it when you are working in an application, minding your
own
business, when all-of-a-sudden the program quits and the system tells you
an error of type X occured? There are many applications made where you
can look up these numbers and find out what went wrong. MacsBug can also
do this, all you have to do is type error and then the error number. Keep
in mind that the error numbers the system gives you are decimal (not
hexadecimal), so you should put a "#" in front of them.
Example: The sytem tells you: "An error of type 4 has occured," drop into
MacsBug and type "error?#4", MacsBug will then output
"$0004?#4?zero?divide?error".
Note: This error feature is not in earlier versions of MacsBug, so you
may
not have it.
The Simple Calculator You can use MacsBug as a simple calucator. Let?s
say
you need to know what seven times seventeen is, type in "#7?*?#17", and
hit return. The number 119 should now be on your screen. It will be
hidden in
the line:
#7 * #17 = $00000077 #119 #119 '???w'
The lower case letter w is the 119th ASCII character, as the previous
line
shows us. Let's try another example, how about five plus six? You would
type
in "#5 + #6", and hit return. You should then see:
#5 + #6 = $0000000B #11 #11 '????'
MacsBug can also handle multiple operations at a time, like five plus six
plus ten. If you want to say something like five plus six times four
remember to put parentheses around the apropiate numbers. MacsBug has no
concept of orders of operations and it's quite possible for it to add
before
it multiplies. So say this: "#5?+ (#6?*?#4)", which equals #29, instead
of
"#5?+?#6?*?#4", which equals #44.
You can use +, -, *, /, MOD for arithmetic operations. You can use AND
(or
&), OR (or |), NOT (or !), XOR for boolean operations. And you can use =
(or
==), <> (or !=), <, >, <=, >= for equality operations.
If you type in "#5?+?#4?=?#9" MacsBug will give you a one, meaning that
the equality you just said was true. If you said "#5?+?#4?=?#10", Macsbug
will give you a zero, meaning that the equality five plus four equals ten
is
false.
Moving the Cursor Here is a cool trick to move the cursor. It done by
setting memory, the mouse tracking variables specifically. But I'd like
to
talk about setting memory beforehand. There are four commands in MacsBug
to set memory: SB (set byte), SW (set word), SL (set long), and SM (set
memory). You give each of these commands an address first, and then the
values of what you want to set the memory to. Example: There is a byte
that
you have the address of that you want to set to ten, you should type in:
SB $XXXXXXXX #10
where $XXXXXXXX is the address of the byte. Another example: There is a
long
that you have the address of that you want to set to "$4D616320", you
should
type in:
SL $XXXXXXXX $4D616320
again, where $XXXXXXXX is the address of the long. You can use the SM
command the same way in the case that the length you want to set is not
1, 2
or 4 bytes long. You can use SW when you want to set a word (2 bytes).
If you are familiar with Points (the vertical and horizontal coordinates
of
a point on the graf plane), you should know that they take up four bytes
in
memory. The high two bytes (the high word) is the vertical coordinate,
and
the low two bytes (the low word) is the horizontal coordinate. There are
two
global variables that are both Points, one called MTemp, the other called
RawMouse, these variables are the information the Macintosh uses for
controling the cursor. You can set these points by using SL.
There is also a byte called CrsrNew, set this byte to 1 when you want to
notify the Macintosh that the cursor posistions have changed. This is how
you move the mouse to point (5,?6), near the upper-left corner of the
screen:
SL MTemp $00060005 SL RawMouse $00060005 SB CrsrNew #1
Make sure MTemp and RawMouse have the same value. Now type Command-G to
see your newly moved cursor.
Recovering from a Hung Serial Port
Sometimes when you're AppleTalking or modeming and something goes wrong
(like you switch the modem off while data is being sent to it), the
comptuer
will hang. The mouse will still move, but clicking will have no effect.
Here's the solution:
Drop into MacsBug. You should see the routine name "_vSyncWait" plus
something as the current location. If you don't, you probably hit the
system
while it was doing something else. Hit Command-G to get back out of
MacsBug, and try again. After a few tries you should find _vSyncWait.
_vSyncWait is the routine that the system uses to wait for some input
from a serial port. If you can read assembly code, you'll see that it's
pretty
simple. Here's the dump of the significant part:
+0000 4080BB8C MOVE.W $0010(A0),D0 |
3028 0010
+0004 4080BB90 BGT.S _vSyncWait ; 4080BB8C |
6EFA
Register A0 is pointing to a system data structure, in which a word will
be
cleared when the awaited input arrives. The MOVE.W instruction grabs this
word and puts it into register D0. The BGT.S instruction then Branches
back
to the MOVE.W if the byte it just fetched is Greater Than zero. So it
happens that this byte is never going to arrive for whatever reason, but
the
computer is going to wait for eternity. The secret to fixing this is to
use
Command-T to go step along until the MOVE.W instruction is displayed as
the
current instruction. Now use the sw command to set "@(A0+10)" to zero:
sw @(A0+10) 0
Hit Command-T twice more. The MOVE.W instruction will take the zero you
just set into memory and put it in D0, so the D0 display on the left of
the
screen should have its right four digits all zeros. Then when you execute
the BGT.S instruction, it should not go back to the MOVE.W since zero is
not
greater than zero.
Hit Command-G to go. If this was the only byte the software was waiting
for, then it should continue running, although it may go a little crazy
because
it's been suddenly disconnected from whatever peripheral it was talking
to.
Quit the program, fix your hardware, and try again.
Shameless Strobe Light Trick
Okay, this is a really useless trick, but it's cool for at least a little
while. Go into MacsBug. If you have a single screen type in "swap", the
console should then say "Display will be swapped after each trace or
step",
if it doesn't type in "swap" again. Swapping is when the screen switches
from the MacsBug console to the normal Macintosh screen. We want it to
swap after each trace or step, which is what we just did up above. Now we
need it to step, thereby swapping the screen, the "s" command (the step
command) is just what we need to do this. We want this to happend more
than once, so we type in: "s 100", which steps 100 times. Enjoy the show.
Warning: Swapping with a number like 1000 can render some machines, like
my PowerBook 165c, useless until it is all over with, so keep the numbers
low or the patience high.
GetKeys from within MacsBug
There is a routine in the Macintosh toolbox called GetKeys, this routine
is
great for game programmers who want a reasonably fast way to read the
keyboard, without using (slower) events. The problem for C and C++
programmers using this routine is that the KeyMap type is a Pascal packed
array. Each bit of the packed array is designated to a certain key, the
bit
is set to 1 if the key is down, and set to zero if the key is up. This
array
takes up 16 bytes (128 bits). C cannot access the elements of the packed
array like a normal array, so the programmer has to mask out some bits to
get the result that he/she wants. There is a desk accessory named
"GetKeys,"
that is made just for this case. The problem is, you might not be on a
machine with that program on it.
Good thing MacsBug is able to help us. Here is how you locate the bit for
the letter "M": go into MacsBug and type in "dm KeyMap", but don't hit
return just yet. Now strike the escape key, this should swap the screen.
Press and hold down the letter "M" on your keyboard, this should swap the
screen back. Now, while still holding down "M", press return. This is
what
you should see:
Displaying memory from 0174
00000174 0000 0000 0040 0000 0000 0000 0000 0000 ?????@??????????
The number "00000174" is the address of the KeyMap global variable. The
next set of numbers ?0000?0000? is the first element of the C version of
the array, in other words, it?s: "keyMap[0]". The next set of numbers
"0040?0000" is the second element of the array, keyMap[1]. The next group
of 8 hexadecimal digits is the third element (keyMap[2]), and the last
group of 8 hexadecimal digits is the fourth element (keyMap[3]). The
series of
bullets is what the array looks like in ASCII form. In the second group
("0040?0000") there is a 4 in the midst of all of those zeros. This is
the
bit that is set to 1 whenever the "M" key is held down. So, to see if the
"M" is down from within C we will do this:
KeyMap keyMap;
GetKeys( keyMap );
if( keyMap[1] & 0x00400000 )
{ DoMKeyDown();
The Lost Paper
I was once typing in some text in a word processor, when the computer
suddenly crashed on me. I didn't save a copy on to the hard-disk yet. I
had
to restart the computer and type it all over again. But wait, the paper
is
still in the machine I thought to myself. You see, when you restart, all
of
the computer's memory doesn't get cleared, it just stays to what it was
until it gets replaced with other information, much like the behavior of
a
hard-disk. I had one thing going for me, I had MacsBug installed. Here
are
the steps I took to recover the paper:
First, I logged all of the work I was doing in MacsBug to a file. I did
this
using the log command. All you need to give the log command is the name
of
the new file to log to. I named it MyPaper. Good, now all of my MacsBug
session will be on the hard-disk so I can open it up with a normal text
editor when I'm done.
Next, I needed to find where in memory my paper was. I did this using the
"f" command. The first two parameters for this command is the range in
memory in which you want MacsBug to search through. I wanted to search
through all of my memory, which is 8 megs on my machine, so I typed in:
"f?0?(400?*?400?*?8)?"any string". Where 0 is the beginning of memory and
8 megs is the top of it. (Note: "400?*?400" is exactly one megabyte of
memory.) The last parameter is the search string, balanced between two
single quotes. I wanted to pick a distinct string, otherwise I would have
found other parts of memory, which would take longer to do. I knew the
most
famous mammal, the aardvark, was mentioned in my paper, so I typed in
this
for the find command:
f 0 (400 * 400 * 8) "aardvark"
MacsBug then started searching for me. It came up with a small memory
dump of something with the word arrdvark in it, but the words after it
were not mine, which meant that I found another part of memory instead of
my paper. I hit return to tell MacsBug to keep on searching. MacsBug then
came up with a dump from my paper:
Searching for "aardvark" from 00000000 to 007FFFFF
00358200 6161 7264 7661 726B 8000 0000 0000 002C aardvark answer
Which was very good news indeed! This told me that the string "aardvark
answer" could be found at address 00358200. (I got this address from the
leftmost number given.)
Now that I knew where it was, the rest my task would be easy. I used
MacsBug's display ASCII command to show me what came after it, by typing
in: dma 00358200. You might not have this command, in which case you'll
have to use plain old dm, instead of dma. I hit return until my paper was
done beingdisplayed.
Note: You can subract a number from the address to see what was before
it.
I then typed in "log" again, which closed my log. Finally, I went out of
MacsBug and opened the log file with SimpleText. Remember, the log had my
whole session not just the paper so I had to delete the addresses and
such
from it, which really isn't that hard to do, if you know how to use your
mouse and your delete key efficiently. The paper was saved.
Warning: In your search you might stumble upon MacsBug's very own memory,
with its own copy of your search string. To get out of this loop, start
the
search over again with the base search address being outside of MacsBug's
memory.
Credits
The authors of this are Macneil Shonle and Dustin Mitchell of The Syzygy
Cult, a programming group that makes games and utilities. Dustin reviewed
this and submitted the Recovering from a Hung Serial Port section, thanks
Dustin!
Email MacneilS@aol.com if you have some input on how I can make Cool
MacsBug Tricks even better; nothing is too small to mention. Thanks for
reading!