💾 Archived View for spam.works › mirrors › textfiles › phreak › atm's.phk captured on 2023-11-14 at 11:15:15.

View Raw

More Information

⬅️ Previous capture (2023-06-16)

-=-=-=-=-=-=-

Subject: Re: ATM secret codes
Summary: ATM stuff

> The transactions done by ATM sometimes (not always) are kept by the
> machine until remove by human hands and fed to the bank's computer at
> its headquarters.  Hence not much communication between ATM and the
> outside world.



  This is off the top of my head, but is 99% there.  Also I'll ignore some
obsolete stuff.

  The physical layout of the cards are standard.  The LOGICAL makeup varies
from institution to institution.  There are some generally followed layouts,
but not mandatory.

  There are actually up to three tracks on a card.

  Track 1 was designed for airline use.  It contains your name and usually your
account number.  This is the track that is used when the ATM greets you by
name.  There are some glitches in how things are ordered so occasionally you do
get "Greetings Bill Smith Dr." but such is life.  This track is also used with
the new airline auto check in (PSA, American, etc)

  Track 3 is the "OFF-LINE" ATM track.  It contains such nifty information as
your daily limit, limit left, last access, account number, and expiration date.
(And usually anything I describe in track 2).  The ATM itself could have the
ability to rewrite this track to update information.

  Track 2 is the main operational track for online use.  The first thing on
track to is the PRIMARY ACCOUNT NUMBER (PAN).  This is pretty standard for all
cards, though no guarantee.  Some additional info might be on the card such as
expiration date.  One interesting item is the PIN offset.  When an ATM verifies
a PIN locally, it usually uses an encryption scheme involving the PAN and a
secret KEY.  This gives you a "NATURAL PIN" (i.e.  when they mail you your pin,
this is how it got generated.) If you want to select your own PIN, they would
put the PIN OFFSET in the clear on the card.  Just do modulo 10 arithmetic on
the Natural PIN plus the offset, and you have the selected PIN.  YOUR PIN IS
NEVER IN THE CLEAR ON YOUR CARD.  Knowing the PIN OFFSET will not give you the
PIN.  This will required the SECRET KEY.

  Hope that answers your question....






Deposits on ATM:

  Various banks have various systems.  As an example, at CITIbank a deposit was
made to a specific account.  Your account was updated with a MEMO update, i.e.
it would show up on your balance.  However it did not become AVAILABLE funds
until it was verified by a teller.  On the envelope was Customer ID number, the
envelope number and the Entered dollar amount, the branch # and the Machine #.

  There was also a selection for OTHER PAYMENTS.  This allowed you to dump any
deposit into the ATM.

  What are you assured then when you deposit to an ATM ?

1) You have a banking RECORD (not a reciept at Citibank).  If you
   have this record, there is a VERY high percentage that you
   deposited something at that ATM.

2) Some banks have ways of crediting your deposit RIGHT NOW.
   This could be done by a balance in another account (i.e. a long
   term C.D. or a line of credit.)  That way they can get you if
   you lied.




  I've worked with about 75% of the types of machines on the market and NONE of
them split a card in half upon swallow.  However, some NETWORKS have a policy
of slicing a card to avoid security problems.

  Trusting an ATM.  Intresting you should bring this up, I'm just brusing up a
paper describing a REAL situation where your card and PIN are in the clear.
This involves a customer using a bank that is part of a network.  All the
information was available to folks in DP, if they put in some efforts to get
it.





	  Mis-Implementation of an ATM PIN security system


1.  Synopsis

  In an EFT (Electronic Funds Transfer) network, a single node which does not
implement the proper security can have effects throughout the network.	In this
paper, the author describes an example of how security features were ignored,
never-implemented, and/or incorrectly designed.  The human factors involved in
the final implementation are explored by showing several major vulnerabilites
caused by a Savings and Loan and a regional EFT network's lack of vigilance in
installing an EFT network node.  While using an EFT system as an example, the
concepts can be extrapolated into the implementation of other secured systems.


2.  Background

  A small Savings and Loan was setting up a small (10 to 16 ATMs) proprietary
Automatic Teller Machine (ATM) network.  This network was then intended to link
up to a regional network.  The manufacturer of the institution's online banking
processor sent an on-site programmer to develop the required interfaces.

  An ATM network consists of three main parts.	The first is the ATM itself.
An ATM can have a range of intelligence.  In this case the ATM was able to
decode a PIN (Personal Identification Number) using an institution supplied DES
(Data Encryption Standard) key.  It was then required to send a request for
funds to the host where it would receive authorization.

  The second portion of the network is the ATM controller.  The controller
monitors the transaction, and routes the message to the authorization
processor.  The controller would also generally monitor the physical devices
and statuses of the ATM.

  The third portion of the network is the authorization system.  In this case
customers of the local institution would have the transaction authorized on the
same processor.  Customers from foreign (i.e.  one that does not belong to the
institution that runs the ATM) institutions would be authorized by the regional
network.  Authorization could be from a run-up file which maintains establishes
a limit on withdrawals for a given account during a given period.  A better
method is authorization direct from the institution which issued the card.

3.  Security

  The system has a two component key system to allow access to the network by
the customer.  The first is the physical ATM card which has a magnetic stripe.
The magnetic stripe contains account information.  The second component is the
Personal Identification Number (PIN).  The PIN is hand entered by the customer
into the ATM at transaction time.  Given these two parts, the network will
assume that the user is the appropriate customer and allow the transaction to
proceed.

  The Magnetic stripe is in the clear and may be assume to be reproducible
using various methods, thus the PIN is crucial security.


Security
PIN security


3.1.  PIN security


3.1.1.	PIN key validation method

  PINs can be linked up to a particular card in a number of ways.  One method
puts the PIN into a central data base in a one-way encrypted format.  When a
PIN is presented, it would be encrypted against the format in the data base.
This method requires a method of encrypting the PIN given at the ATM, until it
can be verified at the central site.  Problems can also occur if the
institution wants to move the PIN data base to another processor, especially
from a different computer vendor.

  Another method is to take information on the card, combine it with an
institution PIN encryption key (PIN key) and use that to generate the PIN.  The
institution in question used the PIN key method.  This allows the customer to
be verified at the ATM itself and no transmission of the PIN is required.  The
risk of the system is the PIN key must be maintained under the tightest of
security.

  The PIN key is used to generate the natural PIN.  This is derived by taking
the account number and using DES upon it with the PIN key.  The resulting
number then is decimialized by doing a lookup on a 16 digit decimalization
table to convert the resulting hexadecimal digits to decimal digits.  An ATM
loaded with the appropriate PIN key can then validate a customer locally with
no need to send PIN information to the network, thereby reducing the risk of
compromise.

  The PIN key requires the utmost security.  Once the PIN key is known, any
customer's ATM card, with corresponding PIN can be created given a customer
account number.  The ATM allows for the PIN to be entered at the ATM in two
parts, thus allowing each of two bank officers to know only one half of the
key.  If desired, a terminal master key can be loaded and then the encrypted
PIN key loaded from the network.

  The decimalization table usually consists of 0 to 9 and 0 to 5, ("0" to "F"
in hexadecimal where "F" = 15).  The decimalization table can be put into any
order, scrambling the digits and slowing down an attacker.  (As a side note, it
could be noted that using the "standard" table, the PIN digits are weighted to
0 through 5, each having a 1/8 chance of being the digit, while 6 through 9 has
only a 1/16 chance.)

  When handling a foreign card, (i.e.  one that does not belong to the
institution that runs the ATM), the PIN must be passed on to the network in
encrypted form.  First, however, it must be passed from the ATM to the ATM
controller.  This is accomplished by encrypting the PIN entered at the ATM
using a communication key (communication key), The communication key is entered
at the ATM much like the PIN key.  In addition, it can be downloaded from the
network.  The PIN is decrypted at the controller and then reencrypted with the
network's communication key.

  Maintaining the the security of the foreign PIN is of critical importance.
Given the foreign PIN along with the ATM card's magnetic image, the perpetrator
has access to an account from any ATM on the network.  This would make tracking
of potential attackers quite difficult, since the ATM and the institution they
extract funds from can be completely different from the institution where the
information was gleaned.

  Given that the encrypted PIN goes through normal communication processes, it
could be logged on the normal I/O logs.  Since it is subject to such logging,
the PIN in any form should be denied from the logging function.


3.2.  Security Violations

  While the EFT network has potential to run in a secured mode given some of
the precautions outlined above, the potential for abuse of security is quite
easy.  In the case of this system, security was compromised in a number of
ways, each leading to the potential loss of funds, and to a loss of confidence
in the EFT system itself.


3.2.1.	Violations of the PIN key method

  The two custodian system simply wasn't practical when ATMs were being
installed all over the state.  Two examples show this:	When asked by the
developer for the PIN key to be entered into a test ATM, there was first a
massive search for the key, and then it was read to him over the phone.  The
PIN key was written on a scrap of paper which was not secured.	This is the PIN
key that all the customer PINs are based on, and which compromise should
require the reissue of all PINs.)

  The importance of a system to enter the PIN key by appropriate officers of
the bank should not be overlooked.  In practice the ATM installer might be the
one asked to enter the keys into the machine.  This indeed was demonstrated in
this case where the ATM installer not only had the keys for the Savings and
Loan, but also for other institutions in the area.  This was kept in the high
security area of the notebook in the installer's front pocket.

  Having a Master key entered into the ATM by officers of the bank might add an
additional layer of security to the system.  The actual PIN key would then be
loaded in encrypted form from the network.  In the example above, if the
installer was aware of the terminal master key, he would have to monitor the
line to derive the actual PIN key.

  The use of a downline encrypted key was never implemented, due to the
potential complications and added cost of such a system.  Even if it was, once
violated, security can only be regained by a complete reissue of customer PINs
with the resulting confusion ensuing.


3.2.2.	Network validated PIN Security violations

  Given the potential for untraced transactions, the maintenance of the foreign
PINs security was extremely important.	In the PIN key example above, any
violation would directly affect the institution of the violators.  This would
limit the scope of an investigation, and enhance the chance of detection and
apprehension.  The violation of foreign PIN information has a much wider sphere
of attack, with the corresponding lower chance of apprehension.

  The communication key itself was never secured.  In this case, the developer
handed the key to the bank officers, to ensure the communication key didn't get
misplaced as the PIN key did (This way he could recall it in case it got lost).
Given the communication key, the security violation potential is simple enough.
The programmer could simply tap the line between the ATM and the controller.
This information could then generate a set of PIN and card image pairs.  He
would even have account balances.

  Tapping the line would have been an effort, and worse yet he could get
caught.  However, having the I/O logs could serve the same purpose.  While
originally designed to obscure PIN information in the I/O logs, the feature was
disabled due to problems caused by the regional network during testing.  The
I/O logs would be sent to the developer any time there was a problem with the
ATM controller or the network interface.

  The generation of PIN and card image pairs has a potential for even the most
secured system on the network to be attacked by the lapse in security of a
weaker node.  Neither the communication key, nor the PIN should ever be
available in the clear.  This requires special hardware at the controller to
store this information.  In this case, the institution had no desire to install
a secured box for storing key information.  The communication key was available
in software, and the PIN was in the clear during the process of decrypting from
the ATM and re-encrypting with the network key.  Any programmer on the system
with access to the controller could put in a log file to tap off the PINs at
that point.

  The largest failure of the system, though, was not a result of the items
described above.  The largest failure in the system was in the method of
encrypting the PIN before going to the network.  This is due to the failure of
the network to have a secured key between sites.  The PIN was to be encrypted
with a network key.  The network key was sez4E??5R???k?^?ted form from thee
ettwork to the ATM controller.	However, the key to decrypt the network key was
sent almost in the clear as part of the start-of-day sequence.

  Any infiltrator monitoring the line would be able to get all key information
by monitoring the start-of-day sequence, doing the trivial decryption of the
communication key, and proceeding to gather card image and PIN pairs.  The
infiltrator could then generate cards and attack the system at his leisure.

  The network-ATM controller security failure is the most critical feature
since it was defined by a regional network supporting many institutions.  The
network was supposedly in a better position to understand the security
requirements.


4.  The Human Factors in Security  Violation

  It is important the users of a system be appraised of the procedures for
securing the system.  They should understand the risks, and know what they are
protecting.  The bank officers in charge of the program had little experience
with ATM systems.  They were never fully indoctrinated in the consequences of a
PIN key or communication key compromise.  The officers showed great surprise
when the developer was able to generate PINs for supplied test cards.  Given
the potential risk, nothing more was done to try to change the PIN key, even
though, they were quite aware that the PIN key was in the developer's
possession.  They once even called the developer for the PIN key when they
weren't able to find it.

  The developer had a desire to maintain a smooth running system and cut down
on the development time of an already over-budget project.  Too much security,
for example modifying I/O logs, could delay the isolation or repair of a
problem.

  The regional network was actually a marketing company who subcontracted out
the data processing tasks.  They failed to recognized the security problem of
sending key information with extremely weak encryption.  The keys were all but
sent in the clear.  There seemed to be a belief that the use of encryption in
and of itself caused a network to be secured.  The use of DES with an unsecured
communication key gave the appearance of a secured link.

  The lack of audits of the system, both in design and implementation was the
final security defect which allowed the system to be compromised in so many
ways.  An example of the Savings and Loan's internal auditors failure to
understand the problems or technology is when the auditors insisted that no
contract developers would be allowed physically into the computer room.  The
fact was, access to the computer room was never required to perform any of the
described violations.


5.  Security Corrections

  As in any system where security was required, the time to implement it is at
the beginning.	This requires the review of both implementation and operational
plans for the network.	Audits should be performed to verify that the
procedures are followed as described in the plan.  Financing, scheduling and
man power for such audits must be allocated so security issues can be
addressed.

  For this institution, the first step would have been to indoctrinate the
banking officers of the risks in the ATM network, the vulnerabilites, and the
security measures required.

  Custodians of all keys should be well aware of their responsibilities for
those keys.  A fall back system of key recovery must be in place in case an
officer is not available for key entry.

  The cost of installing hardware encryption units at the host should be
included in the cost of putting in the system.	The host unit could generate
down-line keys for both the PIN key and the communication key thus making it
more difficult to derive these keys without collusion from at least three
people.

  A secured communications key should be established between the Network and
the institution.  This would allow for the exchange of working communication
keys.  This key should be changed with a reasonable frequency.

  All these areas should be audited in both the system specification and
implementation to make sure they are not being abridged in the name of
expediency.


6.  Summary

  In this view of a single institution, a number of failures in the security
system were shown.  There was shown a definite failure to appreciate what was
required in the way of security for PINs and keys used to derive PIN
information.  An avoidance of up front costs for security lead to potentially
higher cost in the future.  The key area was the lack of audits of the EFT
system by both the institution and the network, causing potential loss to all
institutions on the network.