💾 Archived View for spam.works › mirrors › textfiles › hamradio › motbible.txt captured on 2023-11-14 at 10:03:01.
View Raw
More Information
⬅️ Previous capture (2023-06-14)
-=-=-=-=-=-=-
- ****************************************************************************
- *
- MOTOROLA USERS AND PROGRAMMING GUIDES *
- By Mike Larsen *
- Ver. 1.1a *
- 03/26/95 *
- ****************************************************************************
Following the programming text are additional files from several
people on hacking the FOVC, the trik clip, and cable specs for all Motorola
phones. If you have any corrections or additional information to be added to
this text, please E-mail me at:
Mike.Larsen@uti.com
Stularsenmic@vax.colsf.edu
****** READ THIS ****** I will be going to my Motorola Technical
school in a month or so for certification. So if anybody has any questions
they'd like me to ask the "experts", drop me a line. They say they will
answer any valid questions...oh, goody! I assume asking about the guy's sex
life or why they make it so hard to get in the fone is PROBABLY the types of
questions they are trying to avoid. If it's perverted, don't reply...I take
it back. If the guy is a loser, I'll ask him anyway. If the question is a
hack question, try to phrase it in a way that it could be for LEGITIMATE
reasons. They are kinda funny about ESN hacking questions...go figure.
Added Note: Motorola is trying like hell to get their blue books
back. If you have one, don't mention to any cellular providers you have one.
They are taking names and other personal info and who knows what they are
doing with it.
-----------------------------------------------------------------------------
Before going in to the programming of the cellular phone, it is
important for the user to know the normal things necessary for day to day
operation. While the majority of the stuff in the users manual is intended
for people that have problems programming their VCR, their are a few things
that are very important and are only mentioned in the users manual.
Turn On: [Pwr]
Unlock: Three digit unlock code. If you make an
error, [Clr] and enter again.
Place Call: Enter number, [Snd]
Receive Call: [Snd] or open flip fone
End Call: [End] or close flip fone
Store Number: Phone number, [Sto], 2-digit location number
Recall Number: [Rcl], 2-digit location number
Super Speed Dialing: Directory location number, [Snd]
Changing Entries: Press [Rcl] and the 2-digit location number
so that the number to be changed is
displayed. Press and release [Clr] to back
out each of the digits. Enter a new number
and press [Sto].
Call Number Displayed: [Snd]
Microphone Muting: Press [Fcn], [6].
To unmute, press [Fcn], [6]
Lock Unit: [Fcn], [5] or [LOCK]
Display Unlock Code: Press [Fcn], [0], your six-digit security
code, [Rcl].
Changing Your Unlock Code: Press [Fcn], [0], your six-digit security
code, your NEW 3-digit unlock code, [Sto].
Review Battery Meter: Press [Fcn], [4] and release.
Adjust Volume: Earpiece - Press and hold [Vol] to increase.
Release, press again to decrease.
Ringer - [Fcn], then Vol as above.
Recall Last Number Used: [Rcl], [0], [0]
Recall Own Phone Number: [Rcl], [#]
Individual Call Timer: [Rcl], [#], [#]
Resettable Call Timer: [Rcl], [#], [#], [#]
Reset Resettable Call Timer: [Fcn], [0], [7], [Clr]
Cumulative Call Timer: [Rcl], [#], [#], [#], [#]
Access Features: Press [Fcn], [1]. To change features, press
[*] and [#] to scroll and [Clr] to change.
To exit feature menu, press [END].
Review/Scroll Menu Features: Press [*] or [#]
Status Review: [Fcn], [0], [9], [Rcl], [#] or [*] scrolls
messages. To end press [END].
Changing System Type: Press [Rcl], [*]. Repeatedly press [*]
until the desired system type appears. To
select press [Sto].
Outgoing Call Restrictions: Press [Fcn], [0], 6-digit security code,
[1], [Sto]. Phone will place calls only
from memory locations 1-10.
To change back to unrestricted dialing
press [Fcn], [0], 6-digit security code,
[4], [Sto].
I would like to add that while I have extensively worked on finding
additional test mode commands, I (and anyone else) have never worked with the
normal operation commands as listed above. For example, above you will
notice sequences with [Fcn], [1] or [Fcn], [0], [7]. This is totally
unexplored teritory. Happy hacking :)
------------------------------------------------------------------------------
NOTES: Some units have dual NAM's.
The ESN prefix is 130 decimal, 82 hex.
Motorola: 1-800-331-6456
There are MANY different models of Motorola phones sold under various
brand names, if you think it's a Motorola, it probably is.
Determine which access sequence to use:
HAND HELD PORTABLE MODELS
If the phone has a FCN button and no MENU button use sequence 1.
If the phone has no FCN button use sequence 2.
If the phone has a MENU button and a FCN button use sequence 4.
INSTALLED MOBILE PHONES AND TRANSPORTABLE MODELS
If the phone has no FCN button and no RCL button use sequence 3.
If the phone has a FCN button use sequence 4.
If the phone has a MEM button use sequence 5.
If the phone has a RCL button and no FCN button use sequence 6.
SEQUENCE# ACCESS CODE
1 FCN (SECURITY CODE TWICE) RCL
2 STO # (SECURITY CODE TWICE) RCL
3 CTL 0 (SECURITY CODE TWICE) *
4 FCN 0 (SECURITY CODE TWICE) RCL
5 FCN 0 (SECURITY CODE TWICE) MEM
6 CTL 0 (SECURITY CODE TWICE) RCL
The default security code is 000000. The CTL (control) button is the
single black button on the side of the handset.
NAM programing:
1. Turn the power on.
2. Within ten seconds enter the access sequence as determined above.
3. The phone should now show "01" in the left of the display, this is the
first programing entry step number. If it does not the security code
is incorrect, or the programing lock-out counter has been exceeded. In
either case you can still program the unit by following the steps under
TEST MODE PROGRAMING below.
4. The * key is used to increment each step:
Each time you press * the display will increment from the step number,
displayed on the left, to the data stored in that step, displayed on
the right. When the data is displayed make any necessary changes and
press * to increment to the next step number.
5. The SND key is used to complete and exit programing when any STEP
NUMBER is displayed.
If you have enabled the second phone number bit in step 10 below then
pressing SND will switch to NAM 2. Steps 01 thru 06, 09 and 10 will
repeat for NAM 2, the step number will be followed by a "2" to indicate
NAM two.
5. The CLR key will revert the display to the previously stored data.
6. The # key will abort programing at any time.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DESCRIPTION
01 00000 - 32767 SYSTEM ID
02 3 DIGITS AREA CODE
03 7 DIGITS TEL NUMBER
04 2 DIGITS STATION CLASS MARK
05 2 DIGITS ACCESS OVERLOAD CLASS
06 2 DIGITS GROUP ID (10 IN USA)
07 6 DIGITS SECURITY CODE
08 3 DIGITS LOCK CODE
09 0333 OR 0334 INITIAL PAGING CHANNEL
10 6 DIGIT BINARY OPTION PROGRAMING (SEE NOTE 1)
11 3 DIGIT BINARY OPTION PROGRAMING (SEE NOTE 2)
NOTES:
Take care with Motorola's use of "0" and "1". Some options use "0" to
enable, some use "1".
1. This is a 6 digit binary field used to select the following options:
Digit 1: Internal handset speaker, 0 to enable.
Digit 2: Local Use Mark, 0 or 1.
Digit 3: MIN Mark, 0 or 1.
Digit 4: Auto Recall, always set to 1 (enabled).
Digit 5: Second phone number (not all phones), 1 to enable.
Digit 6: Diversity (Two antennas, not all phones), 1 to enable.
2. This is a 3 digit binary field used to select the following options:
Digit 1: Continuous DTMF, 1 to enable.
Digit 2: Transportable Ringer/Speaker, 0=Transducer, 1=Handset.
Digit 3: 8 hour time out in transportable mode, 0 to enable.
On newer models, they have added and changed some numbers. The numbers
as of the 3/27/92 manual are as follows:
1. The 6 digit binary field is still the same.
2. The 3 digit binary field has become a 5 digit binary field.
Digit 1: Failed Page Indicator 1=Disabled;0=Enabled
Digit 2: Motorola Enhanced Scan 1=Enabled; 0=Disabled
Digit 3: Long Tone DTMF 1=Enabled; 0=Disabled
Digit 4: Transportable Internal Ringer Speaker 1=Handset; 0=Transdcr
Digit 5: Eight Hour Timeout 1=Disabled;0=Enabled
TEST MODE ACCESS:
INSTALLED MOBILE PHONES AND TRANSPORTABLE MODELS
To enter test mode on units with software version 85 and higher you must
short pins 20 and 21 of the transceiver data connector. An RS232 break out
box is useful for this, or construct a test mode adaptor from standard
Radio Shack parts.
For MINI TR or Silver Mini Tac transceivers (smaller data connector) you
can either short pins 9 and 14 or simply use a paper clip to short the
hands free microphone connector.
HAND HELD PORTABLE MODELS:
There are two basic types of Motorola portable phones, the Micro-Tac series
"Flip" phones, and the larger 8000 and Ultra Classic phones. Certain newer
Motorola and Pioneer badged Micro-Tac phones do not have a "flip", but
follow the same procedure as the Micro-Tac.
8000 & ULTRA CLASSIC SERIES:
If you have an 8000 series phone determine the "type" before trying to
enter test mode. On the back of the phone, or on the bottom in certain
older models, locate the F09... number this is the series number. If the
FOURTH digit of this number is a "D" you CAN NOT program the unit through
test mode, a Motorola RTL4154/RTL4153 programer is required to make any
changes to this unit.
Having determined that you do not have a "D" series phone the following
procedure is used to access test mode:
Remove the battery from the phone and locate the 12 contacts at the top
near the antenna connector. These contacts are numbered 1 through 12 from
top left through bottom right. Pin 6, top right, is the Manual Test Mode
Pin. You must ground this pin while powering up the phone. Pin 7 (lower
left) or the antenna connector should be used for ground. Follow one of
these procedures to gain access to pin 6:
1. The top section of the battery that covers the contacts contains
nothing but air. By careful measuring you can drill a small hole in the
battery to gain access to pin 6, alternately simply cut the top off the
battery with a hack saw. Having gained access use a paper clip to short
pin six to the antenna connector ground while powering up the phone.
2. If you do not want to "destroy" a battery you can apply an external 7.5
volts to the + and - connectors at the bottom of the phone, ground pin 6
while powering up the phone as above.
3. You can also try soldering or jamming a small jumper between pins 6 and
7 (top right to lower left), or between pin 6 and the antenna connector
housing ground. Carefully replace the battery and power up the phone. Use
caution with this method not to short out any other pin.
4. A cigarette lighter adaptor, if you have one, also makes a great test
mode adaptor as it can be disassembled to give you easier access to pin 6.
Many are pre marked, or even have holes in the right location. This is
because they are often stamped from the same mold that the manufacturer
uses for making hands free adaptor kits and these kits require access to
the phone's connectors.
MICRO-TAC "FLIP" SERIES:
This phone follows similar methods as outlined for the 8000 series above.
Remove the battery and locate the three contacts at the bottom of the
phone, the two outer contacts are raised and connect with the battery. The
center contact is recessed, this is the Manual Test Mode connector.
Now look at the battery contacts, the two outer ones supply power to the
phone, the center contact is an "extra" ground. This ground needs to be
shorted to the test mode connector on the phone. The easiest way to do
this is to put a small piece of solder wick, wire, aluminum foil or any
other conductive material into the recess on the phone. Having done this
carefully replace the battery and turn on the power, if you have been
successful the phone will wake up in test mode.
GENERAL NOTES:
HANDSETS: Most Motorola handsets are interchangeable, when a handset is
used with a transceiver other than the one it was designed for the display
will show "LOANER". Some features and buttons may not work, for instance
if the original handset did not have a RCL or STO button, and the
replacement does, you will have to use the control * or control # sequence
to access memory and A/B system select procedures.
LOCK/UNLOCK PROCEDURES:
Phones with "LOCK" buttons: Press lock for at least 1/2 a second.
Phones with a "FCN" button: Press FCN 5, note that 5 has the letter's
"J,K, and L" for lock.
Phones with no FCN or LOCK button: Press Control 5, control is the black
volume button on the side of the
handset.
SYSTEM SELECT PROCEDURES:
Phones with a RCL button: Press RCL *, then * to select, STO to store.
Phones with no RCL button: Press Control * then * to select, # to store.
Options are: CSCAn: Preferred/Non preferred with system lockout.
Std A/b, or Std b/A: Preferred/Non preferred.
SCAn Ab, or SCAn bA: Non preferred/Preferred
SCAn A: "A" ONLY
SCAn b: "B" ONLY
HOME: Home only
(these are typical options, some phone's vary. C-Scan is only available
on newer models and does not appear unless programed, see below.)
TEST MODE
Taken from the July 1993 Cellular Subscriber Technical Training Manual
Item# 68P09300A60-C and the Curtis Namfax vol.4. I believe this is a
complete listing of all the commands that were ever possible. This
includes old phones and the new ones. If there are two entries for a
particular number, the first one is the current command and the second
is for older models.
NOTE: Not all commands work on all telephones. If a command is not valid the
display will show "ErrOr." Not all numbers have been assigned. Not all
numbers have been listed here. Some commands were intended only for
Motorola factory applications. (This is the disclaimer in the
technical training manual. I have included all of the other commands I
have discovered one way or another. I do believe this is a complete list
of the commands.)
Three test commands are significant for programming and registering the
the telephone for service: see full descriptions under TEST MODE COMMANDS.
32# Clears the telephone. (Older Motorola allowed either three or fifteen
changes in the MIN. After that, the phone had to be sent to Motorola to reset
the counter. This is the command they use.)
38# Displays the ESN
55# This is the TEST MODE PROGRAMMING (as described below).
TEST MODE COMMANDS:
# Enter Test Command Mode
00# no function
01# Restart (Re-enter DC power start-up routine.) On TDMA telephones, this
command has the same effect as pressing the PWR button.
02# Display Current Telephone Status (This is a non-altering version of the
STATUS DISPLAY. On a 14 character display, all the information is shown.
On a 7 character display only the information on the second line of a 14
character display is shown. On a 10 character display, all the
information on the second line of a 14 charcter display plus the last
three characters of the first line are shown.)
STATUS DISPLAY, ALTERNATES BETWEEN:
AAA BBB AAA = Channel Number (decimal) BBB = RSSI reading for channel
CDEFGHI are as follows:
C = SAT frequency (0=5970, 1=6000, 2=6030, 3=no channel lock)
D = Carrier (0=off, 1=on)
E = Signalling tone (0=off, 1=on)
F = Power attenuation level (0 through 7)
G = Channel mode (0=voice channel, 1=control channel)
H = Receive audio mute (0=unmuted, 1=muted)
I = Transmit audio mute (0=unmuted, 1=muted)
Press * to hold display and # to end.
03# Reset Autonomous Timer. This command results in the reset of the
autonomous timer but does not provide any test function on these models.
04# Initializes Telephone to Standard Default Conditions:
Carrier Off, Power Level 0, Receiver Audio Muted, Transmit Audio Muted,
Signalling Tone Off, SAT Off, Resetting of Watch-Dog Timer Enabled,
DTMF and Audio Tones Off, Audio Path Set to Speaker
05# TX Carrier On (Key Transmitter)
06# TX Carrier Off
07# RX Audio Off (Mute Receiver Audio)
08# RX Audio On (Unmute Receiver Audio)
09# TX Audio Off
10# TX Audio On
11(Ch.No.)# Set Tranceiver to Channel xxxx (Receive and Transmit in Decimal;
accepts 1, 2, 3, or 4 digits)
see end of file for more info on this command
12x# Set Power Step to x; (0,1-7) 0=Maximum Power (3 Watts) 7=Minimum Power Out
13# Power Off (Shuts off the radio)
14# 10 kHz Signalling Tone On
15# 10 kHz Signalling Tone Off
16# Setup (Transmits a five word RECC message; each of the five words will
be "FF00AA55CC33." Transmitter de-keys at the end of the message.)
17# Voice (Transmits a two word REVC message; each of the two words will be
"FF00AA55CC33." Transmitter de-keys at the end of the message.)
18# C-Scan (Allows for entry of as many as 5 negative SID's for each NAM.)
Newer Motorola phones are equipped with a feature called C-Scan, this is
an option along with the standard A/B system selections. C-Scan allows
the phone to be programed with up to five inhibited system ID's per NAM.
This is designed to prevent the phone from roaming onto specified non-home
systems and therefore reduce "accidental" roaming fees.
1. C-Scan can only be programed from test mode, power phone up with the
relevant test mode contact grounded (see above).
2. Press # to access test mode.
3. Press 18#, the phone will display "0 40000".
4. Enter the first inhibited system ID and press *.
Continue to enter additional system ID's if required. After the 5th entry
the phone will display "N2". Press * to continue and add system ID's for
NAM 2 as required.
5. If an incorrect entry is made (outside the range of 00000-32767) the
display will not advance, press CLR and re-enter. Use a setting of
40000 for any un-needed locations.
6. When the last entry has been made press * to store and press # to exit,
turn off power.
or
[**Phones without the C-Scan option used this command to SEND NAM.**]
18# SEND NAM. Display shows AA BB. Where AA=Address and BB=Data. Displays
the contents of the NAM, one address at a time, advanced by pressing the
* key. The following data is contained in NAM. The test is exited by
depressing the # key.
SIDH Sec. Code
OPT. (1,2,&3) MIN
MIN1, MIN2 FCHNA
SCM FCHNB
IPCH NDED
ACCOLC CHKSUM GIM
19# Display Software Version Number (4 digits displayed as year and week)
NOTE: Entering commands 20# through 23# or 27# causes the tranceiver to begin
a counting sequence or continous transmission as described below. In
order to exit from the commands to enter another test command, the #
key must be depressed; all other key depressions are ignored.
20# Receive control channel messages counting correctable and uncorrectable
errors. When the command starts, the number of the command will be
displayed in the upper-right corner of the display. Entering a # key
will terminate the command and display two three-digit numbers in the
display. The first number is the number of correctable errors and the
second is the uncorrectable errors.
21# Received voice channel messages counting correctable and uncorrectable
errors. When the command starts, the number of the command will be
displayed in the upper right-hand corner of the display. Entering a #
key terminates the command and will display two three-digit numbers in
display. The first is the number of correctable errors and the second
is the uncorrectable errors.
22# Receive control channel messages counting word sync sequence. When the
command starts, the number of the command will be displayed in the upper
right-hand corner of the display. Entering a # key will terminate the
command and display the number of word sync sequences in the display.
23# Receive voice channel messages counting word sync sequences. When the
command starts, the number of the command will be displayed in the upper
right-hand corner of the display. Entering a # key will terminate the
command and display the number of word sync sequences in the display.
24# Receive control channel data and display the majority voted busy/idle
bit. 0=idle 1=busy
25x# SAT On When x=0, SAT=5970HZ
x=1, SAT=6000HZ
x=2, SAT=6030HZ
26# SAT Off
27# Transmit Data (Transmits continuous control channel data. All words
will be "FF00AA55CC33." When the command starts, '27' will be displayed
in the right side of the display. Entering a # key will terminate the
command. The transmitter de-keys when finished.)
28# Activate the high tone (1150 Hz +/- 55 Hz)
29# De-activate the high tone
30# Activate the low tone (770 Hz +/- 40 Hz)
31# De-activate the low tone
32# Clear (Sets non-volatile memory to zeroes or factory default. This
command will affect all counters, all repertory memory including the last
number called stack, and all user programmable features including the
setting of System Registration. It does not affect the ESN, NAM, phasing
data, or lock code. This takes a minute or so. DO NOT TURN OFF THE
TELEPHONE WHILE THIS IS SHOWING '32' ON THE DISPLAY. WAIT UNTIL THE
NORMAL SERVICE LEVEL DISPLAY RESUMES!)
33x# Turn on DTMF for x (1-9, *, 0, #, plus the single tones)
Where x=1 697 Hz + 1209 Hz 10 697 Hz
2 697 Hz + 1336 Hz 11 770 Hz
3 697 Hz + 1477 Hz 12 852 Hz
4 770 Hz + 1209 Hz 13 941 Hz
5 770 Hz + 1336 Hz 14 1150 Hz (not used in cellular)
6 770 Hz + 1477 Hz 15 1209 Hz
7 852 Hz + 1209 Hz 16 1336 Hz
8 852 Hz + 1336 Hz 17 1477 Hz
9 852 Hz + 1477 Hz 18 1633 Hz (not used in cellular)
* 941 Hz + 1209 Hz
0 941 Hz + 1336 Hz
# 941 Hz + 1477 Hz
34# Turn DTMF Off
35# Display RSSI ("D" Series Portable Only)
or
35x# Set Audio Path to x x=0, V.S.P Microphone (Applies to mobiles only.)
x=1, Speaker
x=2, Alert
x=3, Handset
x=4, Mute
x=5, External Telephone (Applies to Portables Only)
x=6, External Handset (Applies to NEWER Portables)
36nnn# Scan (TDMA Telephones only. Scans the primary control channels and
attempts to decipher the forward data stream. The display will show PASS1
if the strongest control channel was accessed, PASS2 if the second
strongest was accessed, and FAIL if no control channel could be accessed.)
(nnn=Scan speed in milliseconds). Tunes from channel 1 to 666 in order.
Entering a * pauses the scan and displays current Channel Number and
RSSI reading (AAA=Channel Number and BBB=RSSI Reading). When scan speed
is 300 milliseconds or greater, the current status is displayed during the
scan; when less than 300 milliseconds the status is displayed only during
pause. Entering * during a pause causes the scan to resume. Entering #
aborts the scan and leaves the mobile tuned to the current channel. During
this command only the * and # keys are recognized.
37# Sets Low Battery Threshold. Usage: #37#x# where x is any number
from 1 to 255. If set to 1, the Low Battery indicator will come up
when the phone is powered on. If set to 255, it may never come up.
38# Display ESN (Displays ESN in four steps, two hexadecimal digits at a time
in a for digit display. The decimal shows the address, 00 through 03 as
the first two digits, and two digits of the ESN as the last two digits.
Use the 'G' to step through the entire hexadecimal ESN.)
Compander OFF ("D" Series Portables)
or
38# SND-SNM. Display shows AA BB. Where AA=Address;BB=Data. Send the SNM
to the display. All 32 bytes of the SNM will be displayed, one byte at
a time. The byte address will be displayed in the upper right-hand
corner and the contents of that address will be displayed in the hex.
The * key is used to step through the address similar to the SEND-NAM
(18#) command.
39# Compander ON ("D" Series Portables)
or
39# RCVSU. Receive one control channel word. When the word is received it
is displayed in hex. This command will be complete when a control channel
word is received or when the # key is entered to abort the command.
40# RCVVC. Receive one voice channel word. When the word is received it is
displayed in hex. This command will be complete when a voice channel
word is received or when the # key is entered to abort the command.
41# Enables Diversity (On F19CTA... Series only.)
42# Disables Diversity (On F19CTA... Series only.)
43# Disable Diversity
USE T/R ANTENNA (On F19CTA... Series only.)
USE R ANTENNA (On D.M.T./ Mini TAC)
44# Disable Diversity
USE R ANTENNA (On F19CTA... Series only.)
USE T/R ANTENNA (On D.M.T./ Mini TAC)
45# Display Current RSSI (Displayed as a three-digit decimal number)
46# Display Cumulative Call Timer
47x# Set RX Audio level to X
(For F19CTA ...Series Tranceivers)
X=0, Lowest Volume
X=6, Highest Volume
X=7, mute
Normal setting is 4.
(For D.M.T./ Mini TAC Tranceivers)
X=0, Lowest Volume
X=7, Highest Volume
Normal setting is 4.
(For TDMA Tranceivers and F09F... Series and Higher Portables)
X=0, Lowest Volume
X=15, Highest Volume
Normal setting is 2 to 4. (On TDMA
Tranceivers and Micro TAC portables,
settings 8 through 15 are for DTMF
applications only.)
48# Side Tone On. Use this command in conjunction with 350# to test the
entire audio path in hands-free applications.
49# Side Tone Off
50# Maintenance data is transmitted and test results displayed:
PASS=received data is correct
FAIL 1=2second timeout, no data rec.
FAIL 2=received data is incorrect
51# Test of mobile where maintenance data is transmitted and looped back.
Display is as follows:
PASS=looped-back data is correct
FAIL 1=2 second timeout, no looped-back data
FAIL 2=looped-back data is incorrect
52x# SAT Phase Adjustment. A decimal value that corresponds to phase shift
compensation in 4.5 degree increments. Compensation added to inherent
phase shift in tranceiver to achieve a total of 0 degrees phase shift.
Do NOT enter any values except those shown below.
0 degrees = 0 121.5 degrees = 59 243.0 degrees = 86
4.5 = 1 126.0 = 60 247.5 = 87
9.0 = 2 130.5 = 61 252.0 = 112
13.5 = 3 135.0 = 62 256.5 = 113
18.0 = 4 139.5 = 63 261.0 = 114
22.5 = 5 144.0 = 40 265.5 = 115
27.0 = 6 148.5 = 41 270.0 = 116
31.5 = 7 153.0 = 42 274.5 = 117
36.0 = 16 157.5 = 43 279.0 = 118
40.5 = 17 162.0 = 44 283.5 = 119
45.0 = 18 166.5 = 45 288.0 = 120
49.5 = 19 171.0 = 46 292.5 = 121
54.0 = 20 175.5 = 47 297.0 = 122
58.5 = 21 180.0 = 64 301.5 = 123
63.0 = 22 184.5 = 65 306.0 = 124
67.5 = 23 189.0 = 66 310.5 = 125
72.0 = 48 193.5 = 67 315.0 = 126
76.5 = 49 198.0 = 68 319.5 = 127
81.0 = 50 202.5 = 69 324.0 = 104
85.5 = 51 207.0 = 70 328.5 = 105
90.0 = 52 211.5 = 71 333.0 = 106
94.5 = 53 216.0 = 80 337.5 = 107
99.0 = 54 220.5 = 81 342.0 = 108
103.5 = 55 225.0 = 82 346.5 = 109
108.0 = 56 229.5 = 83 351.0 = 110
112.5 = 57 234.0 = 84 355.5 = 111
117.0 = 58 238.5 = 85 360.0 = 70
53# Enable scrambler option, when equipped.
54# Disable scrambler option, when equipped.
55# Display/Program N.A.M. (Test Mode Programming)
TEST MODE PROGRAMING:
Assuming you have completed one of the above steps correctly the phone
will wake up in test mode when you turn the power on. When you first
access test mode the phone's display will alternate between various status
information that includes the received signal strength and channel number.
The phone will operate normally in this mode. You can now access Service
Mode by pressing the # key, the display will clear and a ' will appear.
Use the following procedure to program the phone:
1. Enter 55# to access programing mode.
2. The * key advances to the next step. (NOTE that test mode programing
does NOT have step numbers, each time you press the * key the phone
will display the next data entry).
3. The CLR key will revert the display to the previously stored data.
4. The # key aborts programing at any time.
5. To complete programing you must scroll through ALL entries until a '
appears in the display.
6. Note that some entries contain more digits than can be displayed by the
phone, in this case only the last part of the data can be seen.
TEST MODE PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DESCRIPTION
01 00000 - 32767 SYSTEM ID
02 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 1 BELOW
03 10 DIGITS MIN (AREA CODE & TEL#)
04 2 DIGITS STATION CLASS MARK
05 2 DIGITS ACCESS OVERLOAD CLASS
06 2 DIGITS GROUP ID (10 IN USA)
07 6 DIGITS SECURITY CODE
08 3 DIGITS LOCK CODE
09 3 DIGITS SERVICE LEVEL (LEAVE AT 004)
10 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 2 BELOW
11 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 3 BELOW
12 0333 OR 0334 INITIAL PAGING CHANNEL
13 0333 "A" SYSTEM IPCH
14 0334 "B" SYSTEM IPCH
15 3 DIGIT NUMBER PAGING CHANNEL (021 IN USA)
16 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 4 BELOW
Steps 01 through 06 and 12 will repeat for NAM 2 if the second phone
number bit has been enabled in step 11.
NOTES:
Take care with Motorola's use of "0" and "1". Some options use "0" to
enable, some use "1".
These are eight digit binary fields used to select the following options:
1. (step 02 above, suggested entry is: 11101001 for "A" system, 10101001
for "B" sys)
Digit 1: Local use mark, 0 or 1.
Digit 2: Preferred system, 0 or 1.
Digit 3: End to end (DTMF) dialing, 1 to enable.
Digit 4: Not used, enter 0.
Digit 5: Repertory (speed) dialing, 1 to enable.
Digit 6: Auxiliary (horn) alert, 1 to enable.
Digit 7: Hands free (VSP) auto mute, 1 to enable (mutes outgoing hands
free audio until the MUTE key is pressed).
Digit 8: Min mark, 0 or 1.
2. (step 10 above, suggested entry is: 00000100)
Digits 1 - 4: Not used in USA, enter 0.
Digit 5: Single system scan, 1 to enable (scan A or B system only,
determined by bit 2 of step 02. Set to "0" to allow user the
option).
Digit 6: Super speed dial, 1 to enable (pressing N, or NN SND will
dial the number stored in memory location NN).
Digit 7: User selectable service level, 0 to enable (allows user to
set long distance/memory access dialing restrictions).
Digit 8: Lock function, 0 to enable (allows user to lock/un-lock the
phone, if this is set to 1 the phone can not be locked).
3. (step 11 above, suggested entry is: 00000000)
Digit 1: Handset programing, 0 to enable (allows access to programing
mode without having to enter test mode).
Digit 2: Second phone number (not all phones), 1 to enable.
Digit 3: Call timer access, 0 to enable.
Digit 4: Auto system busy redial, 0 to enable.
Digit 5: Speaker disable, 1 to enable (use with select VSP units only,
do not use with 2000 series mobiles).
Digit 6: IMTS/Cellular, 1 to enable (rarely used).
Digit 7: User selectable system registration, 0 to enable.
Digit 8: Dual antennae (diversity), 1 to enable.
4. (step 16 above, suggested entry is: 0011010 for portable and 0011011
for mobile units)
Digit 1: Not used, 0 only.
Digit 2: Not used, 0 only
Digit 3: Continuous DTMF, 1 to enable (software version 8735 and later)
Digit 4: 8 hour time-out, 0 to enable (software version 8735 and later)
Digit 5: Not used, 0 only.
Digit 6: Failed page indicator, 0 to enable (phone beeps when an
incoming call is detected but signal conditions prevent
completion of the call).
Digit 7: Portable scan, 0 for portable, 1 for mobile units.
56# no function
57x# Call Processing Mode
x=0, AMPS
x=1, NAMPS
x=2-4, RESERVED
x=5, TDMA signalling
x=6, TDMA signalling with loopback before decoding
x=7, TDMA signalling with loopback voice after decoding
x=8, TDMA signalling with loopback FACCH after decoding
x=9, TDMA forced synchronization
58# Compander On (Audio compressor and expander) (See 39#)
59# Compander Off (Audio compressor and expander) (See 38#)
60# no function
61# ESN Transfer (For Series I D.M.T./Mini TAC only)
62# Turn On Ringer Audio Path
63# Turn Off Ringer Audio Path
64#-65# no function
66# Identity Transfer (Series II Tranceivers and some Current Shipping Portables)
67# no function
68# Diaplay FLEX and Model Information
69# Used with Identity Transfer
70# Abbreviated field transmitter audio deviation command, for tranceivers
with FCC ID ABZ89FT5668.
71# Abbreviated field power adjustment command, for tranceivers with FCC ID
ABZ89FT5668.
72# Field audio phasing commands.
73# Field power adjustment command.
74#-99# no function
Notes: As far as I know, this is it. There are NO MORE commands. As new
fones come out, more commands will be added. So if anyone gets a
new fone, please check for more commands...I am poor. Also, a friend
of mine lives in Canada and has Motorola Canada fones. He says he
has found that 99# is a possible command. So if everyone could check
the "no function" command numbers and give me some feedback I would
REALLY appreciate it. Despite popular belief, I still say you can
change ESN from the keypad with NO modifications, software, or opening
the phone.
-------------------------------------------------------------------------------
Note: This is NOT my hack. Thanks to Patrk@delphi.com for this addition.
HACKING THE FOVC
Problem: When listening to something interesting (a conversation),
just when that sexy sounding horny broad begins to give her
phone number to some lucky guy, HANDOFF!!! then static... DAMN!
Trick: Hack the FOVC.
a quick definition: FOVC = FOward Voice Channel
FOCC = FOward Control Channel
REVC = REverse Voice Channel
RECC = REverse Control Channel
As the phone travels through cells, the FOVC is where the tower tells
the phone to adjust power levels for the current cell or to change to
a new channel for use in the new cell. This info can be hacked apart.
So. When you've found a good conversation, don't be lazy! Enter 40#!
This makes the phone listen for commands on the voice channel
(embedded in the audio portion- you can hear it as a "bump" sound). It
will just sit there and the display will read '40' , but the
conversation will still be audible. Now when the phone receives a
FOVC command (a 40 bit sequence) data will flow across the display, in
hex format, and stop. Listen to the phone, if the conversation is
still there, then the command was only to adjust power levels. If the
conversation is gone, then its a handoff. If you only got a power
adjustment command just press # or clr, which ever gets you back to
the ' prompt. Enter 40# and keep listening. You can also use the # key
to cancel the 40# command, if you want to change channels or something.
If it was a handoff, its time for some quick math. You have to convert
some of the numbers to binary, and then to decimal. I don't know how
many characters your phone's display will show. Mine only shows the
last seven of the ten hex digits. Count left from the end 6 digits.
Write down that digit and the next two on a piece of paper, ie:
???j16djjj j=junk numbers (hex numbers range from 0-9,a-f)
/ \
these are lost due to scrolling
write down 16d then convert it to a binary string:
1 = 0001
6 = 0110
d = 1101 (d=13)
now you have a binary string like this: 000101101101
throw away the first 2 bits and get: 0101101101
convert this to decimal and get: 365
365 is the new channel the conversation has moved to! Enter 110365#
and voila! You too, can hear the horny babe's phone number!
Don't forget to enter 40# again, as the call may be moving quickly
through cells ( small cells or freeway driving ) or the call can get
bounced around by the tower for cell traffic purposes.
Here's one more example of the hex>binary>decimal conversion.
???j5aejjj
5 = 0101
a = 1010
e = 1110
full string = 010110101110
truncate 2 msb = 0110101110
convert to decimal = 430
-------------------------------------------------------------------------------
==============================================================================
|| ||
|| Assembling a _QUALITY_ Motorola Flip programming cable ||
|| from a standard battery eliminator. ||
|| ||
|| Written by KG/Control Team/Umf 02/07/94 ||
|| ||
==============================================================================
Word. It seems that alot of bad cables are being sold by some lame asses
here on the west coast. The result, alot of _rare_ LO phonez are being fried.
Welp, this file should clear things up. Even if you've never made anything
but clay pots this should be easy for ya. Take your time and this, along with
your phone will last a lifetime...
Parts: (1) 550 Battery Eliminator
(2) IN4001 Diodes
(1) Head pins(single row straight stick headers)
(1) DB25/RS232 Connector for connection to LPT1
(1) METAL DB25 cover/protector
(1) 1 1/2 foot of 5 line ribbon
(1) jumper wire (be creative)
Tools: Sizzors (I like sizzors for splicing wires)
Soldering Iron
Hot glue gun (borrow mom's)
Exacto knife (optional)
DMM w/continuity
I'll try and be as verbose as possible. All references to the plastic
part that connects the phone to the cable will be known here as the ADAPTER.
The hardest thing to find, at least in where I am, is a battery eliminator
that has all 8 pins on the ADAPTER. So if ya do have a cable with all the
pins you can skip this paragraph. What I did was to go ahead and shell
out the 35 duckets for a battery eliminator that only had pin's 7 & 8 (power)
on the ADAPTER. Go to you local electronix shop and pick up a pack of head
pins. These puppies are the EXACT same thing as what's in the ADAPTER, 'cept
their nickel instead of copper. Cut 4 of them off the plastic but be carefull
not to bend them when you do so.
Carefully pry off the cover of the ADAPTER and use the exacto knife to
get the pins and attatched wires out of the cover. Otherwise you'll end
up melting the cover, and trashing the project. Now de-solder the wires
connected to pins 7 & 8, wrap then with 2 of the ribbon's leads then re-solder
them back to the same pins. Once again, be carefull not to bend them.
Now solder the other 4 ribbon lead to the pins 1, 4-6. Now carefully put
each pin back into the ADAPTER cover, if some of the holes are filled with
resin (batt eliminator), simply push an _extra_ bridge pin thru to get that
shit out! Make a note of their colors, then take the DMM and and go over all
the connections, making sure that no pin one pin on the ADAPTER is _touching
another: 1-4, 2-8, 4-6 ect... * note that pins 7 & 8 will show values from
due to the voltage regulator inside the ciggy plug.
Fire up that hot glue gun and place some on the cover to make sure those
pins/ wires / solder don't move around when ya put the ADAPTER back together.
Don't put too much on or you wont be able to close it. Wait a min or 2 until
that dries, then throw some glue into the ADAPTER and quickly close it up.
As for the DB25 you shouldn't have any trouble. Just make sure you solder
the Diode to the wire before soldering it the the port. Remember parallel pin
specs are not the same as serial!!
The following is a diagram of a DB25 connector (soldering side). The "*"
marks the plain wires, "@" marks placement of the diodes, and the "+" marks
where the jumper connects to the anode side of diode one:
+
13 12 11 10 9 8 7 6 5 4 3 2 1
* * . . . . . . . @ . @ *
. . . . . . . * . . . .
25 24 23 22 21 20 19 18 17 16 15 14
Connect the cathode(black striped) side of the IN4001 to the port!!!!
Cathode Anode
------- | / -----
| /|
| / |
LPT1/pin4 or 2 ________| /__|_________ ADAPTER pin 1
| \ | or Jumper wire
| \ |
| \|
| \
IN4001
(educational innit?)
____________
/ !THE SHIT! \
/ \
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ +
+ +
+ DB25 FLIP Battery Eliminator cable +
+ ---- ---- attatchment pins up: +
+ 1(--------)4 +
+ --------= +
+ 2(--|<----)Jump this line to the Center 1 = +
+ Pin on the back of phone. --------= +
+ = +
+ 4(--|<----)1 "|<" is the IN4001 diode. --------= +
+ = +
+ 12(--------)5 --------= +
+ 4 = -->To phone +
+ 13(--------)6 --------= +
+ 5 = +
+ 18(-+------)8 --------= +
+ | 6 = +
+ | +-)7 --------= +
+ | | 7* = +
+ | | --------= +
+ | | 8* = +
+ NeG PoS ---Cig adapter --------= +
+ +
+ +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This cable will work with the 6.6, 9.11 & 9.9 software. This means that
without a) AMPS or b) The Trick Clip you'll need to find a Flip that has a
firmware revision equal to or below 9122. A good sign that the phone is
indeed a LO, is to check the ESN located on the back and look for any prefix
below A2A. If you can't locate the ESN sticker, usually cause it's stolen,
then look for a MCsquared printed along with the menu sticker. If the phone
has the MC2 don't buy it. If the phone doesn't have the menu sticker don't
buy it! Also before you fork over the $$ make sure that all the ports on the
phone are in good condition.
Some people may experience problems with 486 machines. I'm looking into
slowing the shit down in order for the phone to respond. One way is to divide
your BIOS bus clock by 6, another is to load a TSR that actually slows your
CPU, although I haven't yet found this to work for me. 286-386 processors
work fine. Short cables are a must!
------------------------------------------------------------------------------
From: locke@dfw.net
Date: Thu, 20 Oct 1994 09:53:54 GMT
I just thought I would lend a little help to those of you that may try and
actually USE this schematic. While _close_ to the actual pinouts... this
diagram will not work.
I have included corrections for the FLIP and the BRICK below, with
the word [LOCKE] next to my corrections. Sorry if I confuse anyone.
Anyway, I hope this helps, you CANNOT program the phones without
twisting/connecting the additional 19 & 20 DB25 connections.
Motorol Transciever,s
_____________________
4500x,4800x,6800x,Etc.
______________________
Female 25 Pin Male 25 Pin
D-Connector D-connector
To transciever To P.C.Parallel Port
Pin Pin
1._____________________________________ 4.
2._____________________________________ 18.
___10k______ 13.
/
______4+5._______________________/____10K______ 12.
| 12.____________________________________/
| 11._____________________________________ 13.
| 18._____________________________________ 1.
| 21._____________________________________ 2.
| ___14+17+20+23.____________________________ 18.
| |
| |___ -ve
|
|________ +ve 9 Volt
> Motorola 8500x 8800x(early type)
> ________________________________
>
> 25 Pin D-plug(P.C.lpt1) Phone Back(battery removed)
>
> Pin Diode,s [] [] [] [] [] []
> 3.--orange-|<1n4001---------------------/ / /
> 4.--blue---|<1n4001----------------------------/ /
> 2.--red----|<1n4001---------------------------------------/
>
[LOCKE] ------19, 20 (all tied together & connected to 18)
| |
> | | [] [] [] [] [] []
> 18.--black-------------------/ / / /
> 13.--yellow-----------------------/ / /
> 12.--brown------------------------------------/ /
> 1.--grey-------------------------------------------/
>
>
>
> [] []
> -8 to -12V. +8 to =12V.
> NOTE Diode protocol: Kathode---|<diode---Anode
> Motorola 9800x Personal tac1 etc.
> 25 pin D-plug(P.C. LPT1) Phone Back(battery removed)
>
> Pin Diode,s Battery terminals--> [] [] []
> |
> 2.--black----|<1n4001-------------------------------------|
> \
> \black fly lead
>
> Data plug---> | | | | | |
| |
> | | | | | |
| |
> [LOCKE] ----- 19, 20 white / blue / yellow red
> | | / / / green / /
> | | / / / / / /
> 18.--white----Neg 8-12V-----------------/ / / / / /
[LOCKE] the POSITIVE connection goes
here (below) it does not connect
to ANY of the DBxx cable wires.
| (+12v)
> +8 to +12V---------------------/ / / / /
> 13.--blue---------------------------------------/ / / /
> 12.--green------------------------------------------/ / /
> 1.--yellow---------------------------------------------/ /
> 4.--red------|<1n4001-------------------------------------------/
>
> NOTE Diode protocol: Kathode---|<diode---Anode
NEC 9A
______ __ __
|| ||
25 Pin D-Plug(LPT1) || ||
____________________ || ||
|| ||
Pin _||__________ __________||__
1.green | | | |
6.-|<1n4148------ | phone / \ phone |
8.-|<1n4148-- | | / \ |
| | | | | |
| | back-->| |<---front-->| |<--back
10.----------- | | | | |
13.-----------------red | \ / |
15.------blue | | | | | | | |
18.------black | / | \
| / | \
black blue/ green \red
Diodes = 1N4148
NOTE Diode protocol: Kathode---|<diode---Anode
NEC 11A transciever
- *NOTE-A car kit power loom is required to power phone, also a handset
is required, and is plugged into the female end of the gender change plug.
- *NOTE-The gender change plug is a male 15 pin D plug soldered back to back
back with a female 15 pin D socket. Male end interfaces transceiver, female
end interfaces the handset.
25 Pin D-Plug(LPT1) 15 Pin D-Gender changer
____________________ _______________________
Pin Pin
1.------green----------------------------- 13. green
6.-|<1n4148------
8.-|<1n4148-- |
| |
10.----------- |
13.------red--------------------------------12. red
15.------blue-------------------------------14. blue
18.------black-------------------------------2. black
\-----black------------------------------11. black
Power supply 12V dc. Power up using handset BEFORE interfacing computer LPT1.
NOTE Diode protocol: Kathode---|<diode---Anode
NEC P3.
_______
25 Pin D-plug LPT1. Plug on end of curly cord.
___________________ __________________________
Pin 25.--------------------black--------------------------------------|
Pin 15.--------------------red-------------------------------------| |
Pin 6.---|<In4148--| | |
Pin 13.-------------|------white--------------------------------| | |
|| [] [] [] [] [] []
view into plug:aerial---><>
Pin 3.---|<1N4148---| || [] [] [] [] [] []
Pin 12.--------------|-----brown--------------------------------|
NOTE Diode protocol: Kathode---|<diode---Anode
NEC P4
______
25 Pin D-plug LPT1. Transistors 2N3904 npn NAM Adaptor Plug
___________________ ______________________ __________________
Pin 15.-----C-\------green----------------------------------------|
\ |
Pin 2.-10K-B---O |
/ |
Pin 19.-----E-/------blue-----------------------------| |
Pin 19.-----E-\ | |
\ | |
Pin 4.-10K-B---O | |
/ | |
Pin 12.-----C-/---|--yellow | |
| | |
| | |
| NAM Adaptor plug: aerial ---><> [] [] [] [] [] [] [] []
| | |
Pin 13.----red---(|)-------------------------------------------| |
| |
|---------------------------------------------------|
Panasonic D,E,F
----------------
Build the Maplins 'RS232 to TTL conversion board 'MAX232(Order Code
LM75S)to specification, except do not include resistor R5.
Switches SW-1 must be in the OFF position.
--------------------------Press any Key to continue---------------------------
9 PIN SERIAL D-PLUG Interface PL2 on MAX232
Pin 8.----------------|--IN4148>|----\
Pin 7.----------------| \___________________ 1.Pin
/
Pin 4.----------------|--IN4148>|----/
Pin 6.----------------|
Pin 3.-----------------------------------------------------7.Pin
Pin 2.-----------------------------------------------------6.Pin
Pin 5.-----------------------------------------------------8.Pin
- ****************************************************************************
PL1.on MAX232----------'F'Lead------------'D'Lead-----------'E'Lead
Pin 2+6 pin 1. pin 6. pin 5.
Pin 5 pin 6. pin 5. pin 1.
Pin 7. pin 2. pin 4. Link to program
___ Pin/Power lead
Pin 8. pin 8. aerial brade / Pin 8.
/ /////
1 3 5 7 2 4 6 /1_______| |_________12
[][][][] [] [] [] [][][][][][][][][][][][]
View of Plugs--> <> <> |______________________|
[][][][] [] [] [] |_________________|
2 4 6 8 1 3 5
Diode Protocol: Anode---diode>|--Kadthode
--------------------------------------------------------------------------------
Final Note: I HAVE NEVER TESTED ANY OF THESE CABLE SPECS!!! I REPEAT.
I HAVE NEVER TRIED ANY OF THESE CABLE SPECS! THE USE OF THESE
CABLES COULD DESTROY YOUR PHONE IF THE CABLES ARE MADE
INCORRECTLY. Whether these specs are good or bad is news to me.
So if someone could e-mail me to let me know one way or another I
would be REALLY obliged. The reason I have never tried these is
because I HAVE NO DAMN SOFTWARE to use them with. Someone
UUENCODE a copy of the newest Motorola software to me (unless it
is that crap floating around that only changes shit you could do
with the above commands. ESN changing software is what I need.)
Anyone with experience in disassembling Motorola's software
should e-mail me. We need to get together.
Mike.Larsen@uti.com
Stularsenmic@vax.colsf.edu
-----------------------------------------------------------------------------
The following text was mailed to me but there was no credit given to the source
of this info. I'm sorry and will correct it if given the proper credits.
-ML
CELLULAR PHONE FREQUENCIES AND MOTOROLA
TEST MODE NUMERIC CODES.
( Motorola test mode channel numbers )
( are for use in motorola test mode )
( with function 11xxxx# )
( All frequencies in Megahertz FM )
Lower Set (1-666)
Tower Freq. Mobile Freq. 11xxxx# Channel
Tx 870.03 Rx 825.03 Chan 0001 #1
Tx 870.06 Rx 825.06 Chan 0002 #2
Tx 870.09 Rx 825.09 Chan 0003 #3
Tx 870.12 Rx 825.12 Chan 0004 #4
Tx 870.15 Rx 825.15 Chan 0005 #5
Tx 870.18 Rx 825.18 Chan 0006 #6
Tx 870.21 Rx 825.21 Chan 0007 #7
Tx 870.24 Rx 825.24 Chan 0008 #8
Tx 870.27 Rx 825.27 Chan 0009 #9
Tx 870.30 Rx 825.30 Chan 0010 #10
Tx 870.33 Rx 825.33 Chan 0011 #11
Tx 870.36 Rx 825.36 Chan 0012 #12
Tx 870.39 Rx 825.39 Chan 0013 #13
Tx 870.42 Rx 825.42 Chan 0014 #14
Tx 870.45 Rx 825.45 Chan 0015 #15
Tx 870.48 Rx 825.48 Chan 0016 #16
Tx 870.51 Rx 825.51 Chan 0017 #17
Tx 870.54 Rx 825.54 Chan 0018 #18
Tx 870.57 Rx 825.57 Chan 0019 #19
Tx 870.60 Rx 825.60 Chan 0020 #20
Tx 870.63 Rx 825.63 Chan 0021 #21
Tx 870.66 Rx 825.66 Chan 0022 #22
Tx 870.69 Rx 825.69 Chan 0023 #23
Tx 870.72 Rx 825.72 Chan 0024 #24
Tx 870.75 Rx 825.75 Chan 0025 #25
Tx 870.78 Rx 825.78 Chan 0026 #26
Tx 870.81 Rx 825.81 Chan 0027 #27
Tx 870.84 Rx 825.84 Chan 0028 #28
Tx 870.87 Rx 825.87 Chan 0029 #29
Tx 870.90 Rx 825.90 Chan 0030 #30
Tx 870.93 Rx 825.93 Chan 0031 #31
Tx 870.96 Rx 825.96 Chan 0032 #32
Tx 870.99 Rx 825.99 Chan 0033 #33
Tx 871.02 Rx 826.02 Chan 0034 #34
Tx 871.05 Rx 826.05 Chan 0035 #35
Tx 871.08 Rx 826.08 Chan 0036 #36
Tx 871.11 Rx 826.11 Chan 0037 #37
Tx 871.14 Rx 826.14 Chan 0038 #38
Tx 871.17 Rx 826.17 Chan 0039 #39
Tx 871.20 Rx 826.20 Chan 0040 #40
Tx 871.23 Rx 826.23 Chan 0041 #41
Tx 871.26 Rx 826.26 Chan 0042 #42
Tx 871.29 Rx 826.29 Chan 0043 #43
Tx 871.32 Rx 826.32 Chan 0044 #44
Tx 871.35 Rx 826.35 Chan 0045 #45
Tx 871.38 Rx 826.38 Chan 0046 #46
Tx 871.41 Rx 826.41 Chan 0047 #47
Tx 871.44 Rx 826.44 Chan 0048 #48
Tx 871.47 Rx 826.47 Chan 0049 #49
Tx 871.50 Rx 826.50 Chan 0050 #50
Tx 871.53 Rx 826.53 Chan 0051 #51
Tx 871.56 Rx 826.56 Chan 0052 #52
Tx 871.59 Rx 826.59 Chan 0053 #53
Tx 871.62 Rx 826.62 Chan 0054 #54
Tx 871.65 Rx 826.65 Chan 0055 #55
Tx 871.68 Rx 826.68 Chan 0056 #56
Tx 871.71 Rx 826.71 Chan 0057 #57
Tx 871.74 Rx 826.74 Chan 0058 #58
Tx 871.77 Rx 826.77 Chan 0059 #59
Tx 871.80 Rx 826.80 Chan 0060 #60
Tx 871.83 Rx 826.83 Chan 0061 #61
Tx 871.86 Rx 826.86 Chan 0062 #62
Tx 871.89 Rx 826.89 Chan 0063 #63
Tx 871.92 Rx 826.92 Chan 0064 #64
Tx 871.95 Rx 826.95 Chan 0065 #65
Tx 871.98 Rx 826.98 Chan 0066 #66
Tx 872.01 Rx 827.01 Chan 0067 #67
Tx 872.04 Rx 827.04 Chan 0068 #68
Tx 872.07 Rx 827.07 Chan 0069 #69
Tx 872.10 Rx 827.10 Chan 0070 #70
Tx 872.13 Rx 827.13 Chan 0071 #71
Tx 872.16 Rx 827.16 Chan 0072 #72
Tx 872.19 Rx 827.19 Chan 0073 #73
Tx 872.22 Rx 827.22 Chan 0074 #74
Tx 872.25 Rx 827.25 Chan 0075 #75
Tx 872.28 Rx 827.28 Chan 0076 #76
Tx 872.31 Rx 827.31 Chan 0077 #77
Tx 872.34 Rx 827.34 Chan 0078 #78
Tx 872.37 Rx 827.37 Chan 0079 #79
Tx 872.40 Rx 827.40 Chan 0080 #80
Tx 872.43 Rx 827.43 Chan 0081 #81
Tx 872.46 Rx 827.46 Chan 0082 #82
Tx 872.49 Rx 827.49 Chan 0083 #83
Tx 872.52 Rx 827.52 Chan 0084 #84
Tx 872.55 Rx 827.55 Chan 0085 #85
Tx 872.58 Rx 827.58 Chan 0086 #86
Tx 872.61 Rx 827.61 Chan 0087 #87
Tx 872.64 Rx 827.64 Chan 0088 #88
Tx 872.67 Rx 827.67 Chan 0089 #89
Tx 872.70 Rx 827.70 Chan 0090 #90
Tx 872.73 Rx 827.73 Chan 0091 #91
Tx 872.76 Rx 827.76 Chan 0092 #92
Tx 872.79 Rx 827.79 Chan 0093 #93
Tx 872.82 Rx 827.82 Chan 0094 #94
Tx 872.85 Rx 827.85 Chan 0095 #95
Tx 872.88 Rx 827.88 Chan 0096 #96
Tx 872.91 Rx 827.91 Chan 0097 #97
Tx 872.94 Rx 827.94 Chan 0098 #98
Tx 872.97 Rx 827.97 Chan 0099 #99
Tx 873.00 Rx 828.00 Chan 0100 #100
Tx 873.03 Rx 828.03 Chan 0101 #101
Tx 873.06 Rx 828.06 Chan 0102 #102
Tx 873.09 Rx 828.09 Chan 0103 #103
Tx 873.12 Rx 828.12 Chan 0104 #104
Tx 873.15 Rx 828.15 Chan 0105 #105
Tx 873.18 Rx 828.18 Chan 0106 #106
Tx 873.21 Rx 828.21 Chan 0107 #107
Tx 873.24 Rx 828.24 Chan 0108 #108
Tx 873.27 Rx 828.27 Chan 0109 #109
Tx 873.30 Rx 828.30 Chan 0110 #110
Tx 873.33 Rx 828.33 Chan 0111 #111
Tx 873.36 Rx 828.36 Chan 0112 #112
Tx 873.39 Rx 828.39 Chan 0113 #113
Tx 873.42 Rx 828.42 Chan 0114 #114
Tx 873.45 Rx 828.45 Chan 0115 #115
Tx 873.48 Rx 828.48 Chan 0116 #116
Tx 873.51 Rx 828.51 Chan 0117 #117
Tx 873.54 Rx 828.54 Chan 0118 #118
Tx 873.57 Rx 828.57 Chan 0119 #119
Tx 873.60 Rx 828.60 Chan 0120 #120
Tx 873.63 Rx 828.63 Chan 0121 #121
Tx 873.66 Rx 828.66 Chan 0122 #122
Tx 873.69 Rx 828.69 Chan 0123 #123
Tx 873.72 Rx 828.72 Chan 0124 #124
Tx 873.75 Rx 828.75 Chan 0125 #125
Tx 873.78 Rx 828.78 Chan 0126 #126
Tx 873.81 Rx 828.81 Chan 0127 #127
Tx 873.84 Rx 828.84 Chan 0128 #128
Tx 873.87 Rx 828.87 Chan 0129 #129
Tx 873.90 Rx 828.90 Chan 0130 #130
Tx 873.93 Rx 828.93 Chan 0131 #131
Tx 873.96 Rx 828.96 Chan 0132 #132
Tx 873.99 Rx 828.99 Chan 0133 #133
Tx 874.02 Rx 829.02 Chan 0134 #134
Tx 874.05 Rx 829.05 Chan 0135 #135
Tx 874.08 Rx 829.08 Chan 0136 #136
Tx 874.11 Rx 829.11 Chan 0137 #137
Tx 874.14 Rx 829.14 Chan 0138 #138
Tx 874.17 Rx 829.17 Chan 0139 #139
Tx 874.20 Rx 829.20 Chan 0140 #140
Tx 874.23 Rx 829.23 Chan 0141 #141
Tx 874.26 Rx 829.26 Chan 0142 #142
Tx 874.29 Rx 829.29 Chan 0143 #143
Tx 874.32 Rx 829.32 Chan 0144 #144
Tx 874.35 Rx 829.35 Chan 0145 #145
Tx 874.38 Rx 829.38 Chan 0146 #146
Tx 874.41 Rx 829.41 Chan 0147 #147
Tx 874.44 Rx 829.44 Chan 0148 #148
Tx 874.47 Rx 829.47 Chan 0149 #149
Tx 874.50 Rx 829.50 Chan 0150 #150
Tx 874.53 Rx 829.53 Chan 0151 #151
Tx 874.56 Rx 829.56 Chan 0152 #152
Tx 874.59 Rx 829.59 Chan 0153 #153
Tx 874.62 Rx 829.62 Chan 0154 #154
Tx 874.65 Rx 829.65 Chan 0155 #155
Tx 874.68 Rx 829.68 Chan 0156 #156
Tx 874.71 Rx 829.71 Chan 0157 #157
Tx 874.74 Rx 829.74 Chan 0158 #158
Tx 874.77 Rx 829.77 Chan 0159 #159
Tx 874.80 Rx 829.80 Chan 0160 #160
Tx 874.83 Rx 829.83 Chan 0161 #161
Tx 874.86 Rx 829.86 Chan 0162 #162
Tx 874.89 Rx 829.89 Chan 0163 #163
Tx 874.92 Rx 829.92 Chan 0164 #164
Tx 874.95 Rx 829.95 Chan 0165 #165
Tx 874.98 Rx 829.98 Chan 0166 #166
Tx 875.01 Rx 830.01 Chan 0167 #167
Tx 875.04 Rx 830.04 Chan 0168 #168
Tx 875.07 Rx 830.07 Chan 0169 #169
Tx 875.10 Rx 830.10 Chan 0170 #170
Tx 875.13 Rx 830.13 Chan 0171 #171
Tx 875.16 Rx 830.16 Chan 0172 #172
Tx 875.19 Rx 830.19 Chan 0173 #173
Tx 875.22 Rx 830.22 Chan 0174 #174
Tx 875.25 Rx 830.25 Chan 0175 #175
Tx 875.28 Rx 830.28 Chan 0176 #176
Tx 875.31 Rx 830.31 Chan 0177 #177
Tx 875.34 Rx 830.34 Chan 0178 #178
Tx 875.37 Rx 830.37 Chan 0179 #179
Tx 875.40 Rx 830.40 Chan 0180 #180
Tx 875.43 Rx 830.43 Chan 0181 #181
Tx 875.46 Rx 830.46 Chan 0182 #182
Tx 875.49 Rx 830.49 Chan 0183 #183
Tx 875.52 Rx 830.52 Chan 0184 #184
Tx 875.55 Rx 830.55 Chan 0185 #185
Tx 875.58 Rx 830.58 Chan 0186 #186
Tx 875.61 Rx 830.61 Chan 0187 #187
Tx 875.64 Rx 830.64 Chan 0188 #188
Tx 875.67 Rx 830.67 Chan 0189 #189
Tx 875.70 Rx 830.70 Chan 0190 #190
Tx 875.73 Rx 830.73 Chan 0191 #191
Tx 875.76 Rx 830.76 Chan 0192 #192
Tx 875.79 Rx 830.79 Chan 0193 #193
Tx 875.82 Rx 830.82 Chan 0194 #194
Tx 875.85 Rx 830.85 Chan 0195 #195
Tx 875.88 Rx 830.88 Chan 0196 #196
Tx 875.91 Rx 830.91 Chan 0197 #197
Tx 875.94 Rx 830.94 Chan 0198 #198
Tx 875.97 Rx 830.97 Chan 0199 #199
Tx 876.00 Rx 831.00 Chan 0200 #200
Tx 876.03 Rx 831.03 Chan 0201 #201
Tx 876.06 Rx 831.06 Chan 0202 #202
Tx 876.09 Rx 831.09 Chan 0203 #203
Tx 876.12 Rx 831.12 Chan 0204 #204
Tx 876.15 Rx 831.15 Chan 0205 #205
Tx 876.18 Rx 831.18 Chan 0206 #206
Tx 876.21 Rx 831.21 Chan 0207 #207
Tx 876.24 Rx 831.24 Chan 0208 #208
Tx 876.27 Rx 831.27 Chan 0209 #209
Tx 876.30 Rx 831.30 Chan 0210 #210
Tx 876.33 Rx 831.33 Chan 0211 #211
Tx 876.36 Rx 831.36 Chan 0212 #212
Tx 876.39 Rx 831.39 Chan 0213 #213
Tx 876.42 Rx 831.42 Chan 0214 #214
Tx 876.45 Rx 831.45 Chan 0215 #215
Tx 876.48 Rx 831.48 Chan 0216 #216
Tx 876.51 Rx 831.51 Chan 0217 #217
Tx 876.54 Rx 831.54 Chan 0218 #218
Tx 876.57 Rx 831.57 Chan 0219 #219
Tx 876.60 Rx 831.60 Chan 0220 #220
Tx 876.63 Rx 831.63 Chan 0221 #221
Tx 876.66 Rx 831.66 Chan 0222 #222
Tx 876.69 Rx 831.69 Chan 0223 #223
Tx 876.72 Rx 831.72 Chan 0224 #224
Tx 876.75 Rx 831.75 Chan 0225 #225
Tx 876.78 Rx 831.78 Chan 0226 #226
Tx 876.81 Rx 831.81 Chan 0227 #227
Tx 876.84 Rx 831.84 Chan 0228 #228
Tx 876.87 Rx 831.87 Chan 0229 #229
Tx 876.90 Rx 831.90 Chan 0230 #230
Tx 876.93 Rx 831.93 Chan 0231 #231
Tx 876.96 Rx 831.96 Chan 0232 #232
Tx 876.99 Rx 831.99 Chan 0233 #233
Tx 877.02 Rx 832.02 Chan 0234 #234
Tx 877.05 Rx 832.05 Chan 0235 #235
Tx 877.08 Rx 832.08 Chan 0236 #236
Tx 877.11 Rx 832.11 Chan 0237 #237
Tx 877.14 Rx 832.14 Chan 0238 #238
Tx 877.17 Rx 832.17 Chan 0239 #239
Tx 877.20 Rx 832.20 Chan 0240 #240
Tx 877.23 Rx 832.23 Chan 0241 #241
Tx 877.26 Rx 832.26 Chan 0242 #242
Tx 877.29 Rx 832.29 Chan 0243 #243
Tx 877.32 Rx 832.32 Chan 0244 #244
Tx 877.35 Rx 832.35 Chan 0245 #245
Tx 877.38 Rx 832.38 Chan 0246 #246
Tx 877.41 Rx 832.41 Chan 0247 #247
Tx 877.44 Rx 832.44 Chan 0248 #248
Tx 877.47 Rx 832.47 Chan 0249 #249
Tx 877.50 Rx 832.50 Chan 0250 #250
Tx 877.53 Rx 832.53 Chan 0251 #251
Tx 877.56 Rx 832.56 Chan 0252 #252
Tx 877.59 Rx 832.59 Chan 0253 #253
Tx 877.62 Rx 832.62 Chan 0254 #254
Tx 877.65 Rx 832.65 Chan 0255 #255
Tx 877.68 Rx 832.68 Chan 0256 #256
Tx 877.71 Rx 832.71 Chan 0257 #257
Tx 877.74 Rx 832.74 Chan 0258 #258
Tx 877.77 Rx 832.77 Chan 0259 #259
Tx 877.80 Rx 832.80 Chan 0260 #260
Tx 877.83 Rx 832.83 Chan 0261 #261
Tx 877.86 Rx 832.86 Chan 0262 #262
Tx 877.89 Rx 832.89 Chan 0263 #263
Tx 877.92 Rx 832.92 Chan 0264 #264
Tx 877.95 Rx 832.95 Chan 0265 #265
Tx 877.98 Rx 832.98 Chan 0266 #266
Tx 878.01 Rx 833.01 Chan 0267 #267
Tx 878.04 Rx 833.04 Chan 0268 #268
Tx 878.07 Rx 833.07 Chan 0269 #269
Tx 878.10 Rx 833.10 Chan 0270 #270
Tx 878.13 Rx 833.13 Chan 0271 #271
Tx 878.16 Rx 833.16 Chan 0272 #272
Tx 878.19 Rx 833.19 Chan 0273 #273
Tx 878.22 Rx 833.22 Chan 0274 #274
Tx 878.25 Rx 833.25 Chan 0275 #275
Tx 878.28 Rx 833.28 Chan 0276 #276
Tx 878.31 Rx 833.31 Chan 0277 #277
Tx 878.34 Rx 833.34 Chan 0278 #278
Tx 878.37 Rx 833.37 Chan 0279 #279
Tx 878.40 Rx 833.40 Chan 0280 #280
Tx 878.43 Rx 833.43 Chan 0281 #281
Tx 878.46 Rx 833.46 Chan 0282 #282
Tx 878.49 Rx 833.49 Chan 0283 #283
Tx 878.52 Rx 833.52 Chan 0284 #284
Tx 878.55 Rx 833.55 Chan 0285 #285
Tx 878.58 Rx 833.58 Chan 0286 #286
Tx 878.61 Rx 833.61 Chan 0287 #287
Tx 878.64 Rx 833.64 Chan 0288 #288
Tx 878.67 Rx 833.67 Chan 0289 #289
Tx 878.70 Rx 833.70 Chan 0290 #290
Tx 878.73 Rx 833.73 Chan 0291 #291
Tx 878.76 Rx 833.76 Chan 0292 #292
Tx 878.79 Rx 833.79 Chan 0293 #293
Tx 878.82 Rx 833.82 Chan 0294 #294
Tx 878.85 Rx 833.85 Chan 0295 #295
Tx 878.88 Rx 833.88 Chan 0296 #296
Tx 878.91 Rx 833.91 Chan 0297 #297
Tx 878.94 Rx 833.94 Chan 0298 #298
Tx 878.97 Rx 833.97 Chan 0299 #299
Tx 879.00 Rx 834.00 Chan 0300 #300
Tx 879.03 Rx 834.03 Chan 0301 #301
Tx 879.06 Rx 834.06 Chan 0302 #302
Tx 879.09 Rx 834.09 Chan 0303 #303
Tx 879.12 Rx 834.12 Chan 0304 #304
Tx 879.15 Rx 834.15 Chan 0305 #305
Tx 879.18 Rx 834.18 Chan 0306 #306
Tx 879.21 Rx 834.21 Chan 0307 #307
Tx 879.24 Rx 834.24 Chan 0308 #308
Tx 879.27 Rx 834.27 Chan 0309 #309
Tx 879.30 Rx 834.30 Chan 0310 #310
Tx 879.33 Rx 834.33 Chan 0311 #311
Tx 879.36 Rx 834.36 Chan 0312 #312
Tx 879.39 Rx 834.39 Chan 0313 #313
Tx 879.42 Rx 834.42 Chan 0314 #314
Tx 879.45 Rx 834.45 Chan 0315 #315
Tx 879.48 Rx 834.48 Chan 0316 #316
Tx 879.51 Rx 834.51 Chan 0317 #317
Tx 879.54 Rx 834.54 Chan 0318 #318
Tx 879.57 Rx 834.57 Chan 0319 #319
Tx 879.60 Rx 834.60 Chan 0320 #320
Tx 879.63 Rx 834.63 Chan 0321 #321
Tx 879.66 Rx 834.66 Chan 0322 #322
Tx 879.69 Rx 834.69 Chan 0323 #323
Tx 879.72 Rx 834.72 Chan 0324 #324
Tx 879.75 Rx 834.75 Chan 0325 #325
Tx 879.78 Rx 834.78 Chan 0326 #326
Tx 879.81 Rx 834.81 Chan 0327 #327
Tx 879.84 Rx 834.84 Chan 0328 #328
Tx 879.87 Rx 834.87 Chan 0329 #329
Tx 879.90 Rx 834.90 Chan 0330 #330
Tx 879.93 Rx 834.93 Chan 0331 #331
Tx 879.96 Rx 834.96 Chan 0332 #332
Tx 879.99 Rx 834.99 Chan 0333 #333
Tx 880.02 Rx 835.02 Chan 0334 #334
Tx 880.05 Rx 835.05 Chan 0335 #335
Tx 880.08 Rx 835.08 Chan 0336 #336
Tx 880.11 Rx 835.11 Chan 0337 #337
Tx 880.14 Rx 835.14 Chan 0338 #338
Tx 880.17 Rx 835.17 Chan 0339 #339
Tx 880.20 Rx 835.20 Chan 0340 #340
Tx 880.23 Rx 835.23 Chan 0341 #341
Tx 880.26 Rx 835.26 Chan 0342 #342
Tx 880.29 Rx 835.29 Chan 0343 #343
Tx 880.32 Rx 835.32 Chan 0344 #344
Tx 880.35 Rx 835.35 Chan 0345 #345
Tx 880.38 Rx 835.38 Chan 0346 #346
Tx 880.41 Rx 835.41 Chan 0347 #347
Tx 880.44 Rx 835.44 Chan 0348 #348
Tx 880.47 Rx 835.47 Chan 0349 #349
Tx 880.50 Rx 835.50 Chan 0350 #350
Tx 880.53 Rx 835.53 Chan 0351 #351
Tx 880.56 Rx 835.56 Chan 0352 #352
Tx 880.59 Rx 835.59 Chan 0353 #353
Tx 880.62 Rx 835.62 Chan 0354 #354
Tx 880.65 Rx 835.65 Chan 0355 #355
Tx 880.68 Rx 835.68 Chan 0356 #356
Tx 880.71 Rx 835.71 Chan 0357 #357
Tx 880.74 Rx 835.74 Chan 0358 #358
Tx 880.77 Rx 835.77 Chan 0359 #359
Tx 880.80 Rx 835.80 Chan 0360 #360
Tx 880.83 Rx 835.83 Chan 0361 #361
Tx 880.86 Rx 835.86 Chan 0362 #362
Tx 880.89 Rx 835.89 Chan 0363 #363
Tx 880.92 Rx 835.92 Chan 0364 #364
Tx 880.95 Rx 835.95 Chan 0365 #365
Tx 880.98 Rx 835.98 Chan 0366 #366
Tx 881.01 Rx 836.01 Chan 0367 #367
Tx 881.04 Rx 836.04 Chan 0368 #368
Tx 881.07 Rx 836.07 Chan 0369 #369
Tx 881.10 Rx 836.10 Chan 0370 #370
Tx 881.13 Rx 836.13 Chan 0371 #371
Tx 881.16 Rx 836.16 Chan 0372 #372
Tx 881.19 Rx 836.19 Chan 0373 #373
Tx 881.22 Rx 836.22 Chan 0374 #374
Tx 881.25 Rx 836.25 Chan 0375 #375
Tx 881.28 Rx 836.28 Chan 0376 #376
Tx 881.31 Rx 836.31 Chan 0377 #377
Tx 881.34 Rx 836.34 Chan 0378 #378
Tx 881.37 Rx 836.37 Chan 0379 #379
Tx 881.40 Rx 836.40 Chan 0380 #380
Tx 881.43 Rx 836.43 Chan 0381 #381
Tx 881.46 Rx 836.46 Chan 0382 #382
Tx 881.49 Rx 836.49 Chan 0383 #383
Tx 881.52 Rx 836.52 Chan 0384 #384
Tx 881.55 Rx 836.55 Chan 0385 #385
Tx 881.58 Rx 836.58 Chan 0386 #386
Tx 881.61 Rx 836.61 Chan 0387 #387
Tx 881.64 Rx 836.64 Chan 0388 #388
Tx 881.67 Rx 836.67 Chan 0389 #389
Tx 881.70 Rx 836.70 Chan 0390 #390
Tx 881.73 Rx 836.73 Chan 0391 #391
Tx 881.76 Rx 836.76 Chan 0392 #392
Tx 881.79 Rx 836.79 Chan 0393 #393
Tx 881.82 Rx 836.82 Chan 0394 #394
Tx 881.85 Rx 836.85 Chan 0395 #395
Tx 881.88 Rx 836.88 Chan 0396 #396
Tx 881.91 Rx 836.91 Chan 0397 #397
Tx 881.94 Rx 836.94 Chan 0398 #398
Tx 881.97 Rx 836.97 Chan 0399 #399
Tx 882.00 Rx 837.00 Chan 0400 #400
Tx 882.03 Rx 837.03 Chan 0401 #401
Tx 882.06 Rx 837.06 Chan 0402 #402
Tx 882.09 Rx 837.09 Chan 0403 #403
Tx 882.12 Rx 837.12 Chan 0404 #404
Tx 882.15 Rx 837.15 Chan 0405 #405
Tx 882.18 Rx 837.18 Chan 0406 #406
Tx 882.21 Rx 837.21 Chan 0407 #407
Tx 882.24 Rx 837.24 Chan 0408 #408
Tx 882.27 Rx 837.27 Chan 0409 #409
Tx 882.30 Rx 837.30 Chan 0410 #410
Tx 882.33 Rx 837.33 Chan 0411 #411
Tx 882.36 Rx 837.36 Chan 0412 #412
Tx 882.39 Rx 837.39 Chan 0413 #413
Tx 882.42 Rx 837.42 Chan 0414 #414
Tx 882.45 Rx 837.45 Chan 0415 #415
Tx 882.48 Rx 837.48 Chan 0416 #416
Tx 882.51 Rx 837.51 Chan 0417 #417
Tx 882.54 Rx 837.54 Chan 0418 #418
Tx 882.57 Rx 837.57 Chan 0419 #419
Tx 882.60 Rx 837.60 Chan 0420 #420
Tx 882.63 Rx 837.63 Chan 0421 #421
Tx 882.66 Rx 837.66 Chan 0422 #422
Tx 882.69 Rx 837.69 Chan 0423 #423
Tx 882.72 Rx 837.72 Chan 0424 #424
Tx 882.75 Rx 837.75 Chan 0425 #425
Tx 882.78 Rx 837.78 Chan 0426 #426
Tx 882.81 Rx 837.81 Chan 0427 #427
Tx 882.84 Rx 837.84 Chan 0428 #428
Tx 882.87 Rx 837.87 Chan 0429 #429
Tx 882.90 Rx 837.90 Chan 0430 #430
Tx 882.93 Rx 837.93 Chan 0431 #431
Tx 882.96 Rx 837.96 Chan 0432 #432
Tx 882.99 Rx 837.99 Chan 0433 #433
Tx 883.02 Rx 838.02 Chan 0434 #434
Tx 883.05 Rx 838.05 Chan 0435 #435
Tx 883.08 Rx 838.08 Chan 0436 #436
Tx 883.11 Rx 838.11 Chan 0437 #437
Tx 883.14 Rx 838.14 Chan 0438 #438
Tx 883.17 Rx 838.17 Chan 0439 #439
Tx 883.20 Rx 838.20 Chan 0440 #440
Tx 883.23 Rx 838.23 Chan 0441 #441
Tx 883.26 Rx 838.26 Chan 0442 #442
Tx 883.29 Rx 838.29 Chan 0443 #443
Tx 883.32 Rx 838.32 Chan 0444 #444
Tx 883.35 Rx 838.35 Chan 0445 #445
Tx 883.38 Rx 838.38 Chan 0446 #446
Tx 883.41 Rx 838.41 Chan 0447 #447
Tx 883.44 Rx 838.44 Chan 0448 #448
Tx 883.47 Rx 838.47 Chan 0449 #449
Tx 883.50 Rx 838.50 Chan 0450 #450
Tx 883.53 Rx 838.53 Chan 0451 #451
Tx 883.56 Rx 838.56 Chan 0452 #452
Tx 883.59 Rx 838.59 Chan 0453 #453
Tx 883.62 Rx 838.62 Chan 0454 #454
Tx 883.65 Rx 838.65 Chan 0455 #455
Tx 883.68 Rx 838.68 Chan 0456 #456
Tx 883.71 Rx 838.71 Chan 0457 #457
Tx 883.74 Rx 838.74 Chan 0458 #458
Tx 883.77 Rx 838.77 Chan 0459 #459
Tx 883.80 Rx 838.80 Chan 0460 #460
Tx 883.83 Rx 838.83 Chan 0461 #461
Tx 883.86 Rx 838.86 Chan 0462 #462
Tx 883.89 Rx 838.89 Chan 0463 #463
Tx 883.92 Rx 838.92 Chan 0464 #464
Tx 883.95 Rx 838.95 Chan 0465 #465
Tx 883.98 Rx 838.98 Chan 0466 #466
Tx 884.01 Rx 839.01 Chan 0467 #467
Tx 884.04 Rx 839.04 Chan 0468 #468
Tx 884.07 Rx 839.07 Chan 0469 #469
Tx 884.10 Rx 839.10 Chan 0470 #470
Tx 884.13 Rx 839.13 Chan 0471 #471
Tx 884.16 Rx 839.16 Chan 0472 #472
Tx 884.19 Rx 839.19 Chan 0473 #473
Tx 884.22 Rx 839.22 Chan 0474 #474
Tx 884.25 Rx 839.25 Chan 0475 #475
Tx 884.28 Rx 839.28 Chan 0476 #476
Tx 884.31 Rx 839.31 Chan 0477 #477
Tx 884.34 Rx 839.34 Chan 0478 #478
Tx 884.37 Rx 839.37 Chan 0479 #479
Tx 884.40 Rx 839.40 Chan 0480 #480
Tx 884.43 Rx 839.43 Chan 0481 #481
Tx 884.46 Rx 839.46 Chan 0482 #482
Tx 884.49 Rx 839.49 Chan 0483 #483
Tx 884.52 Rx 839.52 Chan 0484 #484
Tx 884.55 Rx 839.55 Chan 0485 #485
Tx 884.58 Rx 839.58 Chan 0486 #486
Tx 884.61 Rx 839.61 Chan 0487 #487
Tx 884.64 Rx 839.64 Chan 0488 #488
Tx 884.67 Rx 839.67 Chan 0489 #489
Tx 884.70 Rx 839.70 Chan 0490 #490
Tx 884.73 Rx 839.73 Chan 0491 #491
Tx 884.76 Rx 839.76 Chan 0492 #492
Tx 884.79 Rx 839.79 Chan 0493 #493
Tx 884.82 Rx 839.82 Chan 0494 #494
Tx 884.85 Rx 839.85 Chan 0495 #495
Tx 884.88 Rx 839.88 Chan 0496 #496
Tx 884.91 Rx 839.91 Chan 0497 #497
Tx 884.94 Rx 839.94 Chan 0498 #498
Tx 884.97 Rx 839.97 Chan 0499 #499
Tx 885.00 Rx 840.00 Chan 0500 #500
Tx 885.03 Rx 840.03 Chan 0501 #501
Tx 885.06 Rx 840.06 Chan 0502 #502
Tx 885.09 Rx 840.09 Chan 0503 #503
Tx 885.12 Rx 840.12 Chan 0504 #504
Tx 885.15 Rx 840.15 Chan 0505 #505
Tx 885.18 Rx 840.18 Chan 0506 #506
Tx 885.21 Rx 840.21 Chan 0507 #507
Tx 885.24 Rx 840.24 Chan 0508 #508
Tx 885.27 Rx 840.27 Chan 0509 #509
Tx 885.30 Rx 840.30 Chan 0510 #510
Tx 885.33 Rx 840.33 Chan 0511 #511
Tx 885.36 Rx 840.36 Chan 0512 #512
Tx 885.39 Rx 840.39 Chan 0513 #513
Tx 885.42 Rx 840.42 Chan 0514 #514
Tx 885.45 Rx 840.45 Chan 0515 #515
Tx 885.48 Rx 840.48 Chan 0516 #516
Tx 885.51 Rx 840.51 Chan 0517 #517
Tx 885.54 Rx 840.54 Chan 0518 #518
Tx 885.57 Rx 840.57 Chan 0519 #519
Tx 885.60 Rx 840.60 Chan 0520 #520
Tx 885.63 Rx 840.63 Chan 0521 #521
Tx 885.66 Rx 840.66 Chan 0522 #522
Tx 885.69 Rx 840.69 Chan 0523 #523
Tx 885.72 Rx 840.72 Chan 0524 #524
Tx 885.75 Rx 840.75 Chan 0525 #525
Tx 885.78 Rx 840.78 Chan 0526 #526
Tx 885.81 Rx 840.81 Chan 0527 #527
Tx 885.84 Rx 840.84 Chan 0528 #528
Tx 885.87 Rx 840.87 Chan 0529 #529
Tx 885.90 Rx 840.90 Chan 0530 #530
Tx 885.93 Rx 840.93 Chan 0531 #531
Tx 885.96 Rx 840.96 Chan 0532 #532
Tx 885.99 Rx 840.99 Chan 0533 #533
Tx 886.02 Rx 841.02 Chan 0534 #534
Tx 886.05 Rx 841.05 Chan 0535 #535
Tx 886.08 Rx 841.08 Chan 0536 #536
Tx 886.11 Rx 841.11 Chan 0537 #537
Tx 886.14 Rx 841.14 Chan 0538 #538
Tx 886.17 Rx 841.17 Chan 0539 #539
Tx 886.20 Rx 841.20 Chan 0540 #540
Tx 886.23 Rx 841.23 Chan 0541 #541
Tx 886.26 Rx 841.26 Chan 0542 #542
Tx 886.29 Rx 841.29 Chan 0543 #543
Tx 886.32 Rx 841.32 Chan 0544 #544
Tx 886.35 Rx 841.35 Chan 0545 #545
Tx 886.38 Rx 841.38 Chan 0546 #546
Tx 886.41 Rx 841.41 Chan 0547 #547
Tx 886.44 Rx 841.44 Chan 0548 #548
Tx 886.47 Rx 841.47 Chan 0549 #549
Tx 886.50 Rx 841.50 Chan 0550 #550
Tx 886.53 Rx 841.53 Chan 0551 #551
Tx 886.56 Rx 841.56 Chan 0552 #552
Tx 886.59 Rx 841.59 Chan 0553 #553
Tx 886.62 Rx 841.62 Chan 0554 #554
Tx 886.65 Rx 841.65 Chan 0555 #555
Tx 886.68 Rx 841.68 Chan 0556 #556
Tx 886.71 Rx 841.71 Chan 0557 #557
Tx 886.74 Rx 841.74 Chan 0558 #558
Tx 886.77 Rx 841.77 Chan 0559 #559
Tx 886.80 Rx 841.80 Chan 0560 #560
Tx 886.83 Rx 841.83 Chan 0561 #561
Tx 886.86 Rx 841.86 Chan 0562 #562
Tx 886.89 Rx 841.89 Chan 0563 #563
Tx 886.92 Rx 841.92 Chan 0564 #564
Tx 886.95 Rx 841.95 Chan 0565 #565
Tx 886.98 Rx 841.98 Chan 0566 #566
Tx 887.01 Rx 842.01 Chan 0567 #567
Tx 887.04 Rx 842.04 Chan 0568 #568
Tx 887.07 Rx 842.07 Chan 0569 #569
Tx 887.10 Rx 842.10 Chan 0570 #570
Tx 887.13 Rx 842.13 Chan 0571 #571
Tx 887.16 Rx 842.16 Chan 0572 #572
Tx 887.19 Rx 842.19 Chan 0573 #573
Tx 887.22 Rx 842.22 Chan 0574 #574
Tx 887.25 Rx 842.25 Chan 0575 #575
Tx 887.28 Rx 842.28 Chan 0576 #576
Tx 887.31 Rx 842.31 Chan 0577 #577
Tx 887.34 Rx 842.34 Chan 0578 #578
Tx 887.37 Rx 842.37 Chan 0579 #579
Tx 887.40 Rx 842.40 Chan 0580 #580
Tx 887.43 Rx 842.43 Chan 0581 #581
Tx 887.46 Rx 842.46 Chan 0582 #582
Tx 887.49 Rx 842.49 Chan 0583 #583
Tx 887.52 Rx 842.52 Chan 0584 #584
Tx 887.55 Rx 842.55 Chan 0585 #585
Tx 887.58 Rx 842.58 Chan 0586 #586
Tx 887.61 Rx 842.61 Chan 0587 #587
Tx 887.64 Rx 842.64 Chan 0588 #588
Tx 887.67 Rx 842.67 Chan 0589 #589
Tx 887.70 Rx 842.70 Chan 0590 #590
Tx 887.73 Rx 842.73 Chan 0591 #591
Tx 887.76 Rx 842.76 Chan 0592 #592
Tx 887.79 Rx 842.79 Chan 0593 #593
Tx 887.82 Rx 842.82 Chan 0594 #594
Tx 887.85 Rx 842.85 Chan 0595 #595
Tx 887.88 Rx 842.88 Chan 0596 #596
Tx 887.91 Rx 842.91 Chan 0597 #597
Tx 887.94 Rx 842.94 Chan 0598 #598
Tx 887.97 Rx 842.97 Chan 0599 #599
Tx 888.00 Rx 843.00 Chan 0600 #600
Tx 888.03 Rx 843.03 Chan 0601 #601
Tx 888.06 Rx 843.06 Chan 0602 #602
Tx 888.09 Rx 843.09 Chan 0603 #603
Tx 888.12 Rx 843.12 Chan 0604 #604
Tx 888.15 Rx 843.15 Chan 0605 #605
Tx 888.18 Rx 843.18 Chan 0606 #606
Tx 888.21 Rx 843.21 Chan 0607 #607
Tx 888.24 Rx 843.24 Chan 0608 #608
Tx 888.27 Rx 843.27 Chan 0609 #609
Tx 888.30 Rx 843.30 Chan 0610 #610
Tx 888.33 Rx 843.33 Chan 0611 #611
Tx 888.36 Rx 843.36 Chan 0612 #612
Tx 888.39 Rx 843.39 Chan 0613 #613
Tx 888.42 Rx 843.42 Chan 0614 #614
Tx 888.45 Rx 843.45 Chan 0615 #615
Tx 888.48 Rx 843.48 Chan 0616 #616
Tx 888.51 Rx 843.51 Chan 0617 #617
Tx 888.54 Rx 843.54 Chan 0618 #618
Tx 888.57 Rx 843.57 Chan 0619 #619
Tx 888.60 Rx 843.60 Chan 0620 #620
Tx 888.63 Rx 843.63 Chan 0621 #621
Tx 888.66 Rx 843.66 Chan 0622 #622
Tx 888.69 Rx 843.69 Chan 0623 #623
Tx 888.72 Rx 843.72 Chan 0624 #624
Tx 888.75 Rx 843.75 Chan 0625 #625
Tx 888.78 Rx 843.78 Chan 0626 #626
Tx 888.81 Rx 843.81 Chan 0627 #627
Tx 888.84 Rx 843.84 Chan 0628 #628
Tx 888.87 Rx 843.87 Chan 0629 #629
Tx 888.90 Rx 843.90 Chan 0630 #630
Tx 888.93 Rx 843.93 Chan 0631 #631
Tx 888.96 Rx 843.96 Chan 0632 #632
Tx 888.99 Rx 843.99 Chan 0633 #633
Tx 889.02 Rx 844.02 Chan 0634 #634
Tx 889.05 Rx 844.05 Chan 0635 #635
Tx 889.08 Rx 844.08 Chan 0636 #636
Tx 889.11 Rx 844.11 Chan 0637 #637
Tx 889.14 Rx 844.14 Chan 0638 #638
Tx 889.17 Rx 844.17 Chan 0639 #639
Tx 889.20 Rx 844.20 Chan 0640 #640
Tx 889.23 Rx 844.23 Chan 0641 #641
Tx 889.26 Rx 844.26 Chan 0642 #642
Tx 889.29 Rx 844.29 Chan 0643 #643
Tx 889.32 Rx 844.32 Chan 0644 #644
Tx 889.35 Rx 844.35 Chan 0645 #645
Tx 889.38 Rx 844.38 Chan 0646 #646
Tx 889.41 Rx 844.41 Chan 0647 #647
Tx 889.44 Rx 844.44 Chan 0648 #648
Tx 889.47 Rx 844.47 Chan 0649 #649
Tx 889.50 Rx 844.50 Chan 0650 #650
Tx 889.53 Rx 844.53 Chan 0651 #651
Tx 889.56 Rx 844.56 Chan 0652 #652
Tx 889.59 Rx 844.59 Chan 0653 #653
Tx 889.62 Rx 844.62 Chan 0654 #654
Tx 889.65 Rx 844.65 Chan 0655 #655
Tx 889.68 Rx 844.68 Chan 0656 #656
Tx 889.71 Rx 844.71 Chan 0657 #657
Tx 889.74 Rx 844.74 Chan 0658 #658
Tx 889.77 Rx 844.77 Chan 0659 #659
Tx 889.80 Rx 844.80 Chan 0660 #660
Tx 889.83 Rx 844.83 Chan 0661 #661
Tx 889.86 Rx 844.86 Chan 0662 #662
Tx 889.89 Rx 844.89 Chan 0663 #663
Tx 889.92 Rx 844.92 Chan 0664 #664
Tx 889.95 Rx 844.95 Chan 0665 #665
Tx 889.98 Rx 844.98 Chan 0666 #666
Upper Set Part 1 (667-799)
Tower Freq. Mobile Freq. 11xxxx# Channel
Tx 890.01 Rx 845.01 Chan 0667 #667
Tx 890.04 Rx 845.04 Chan 0668 #668
Tx 890.07 Rx 845.07 Chan 0669 #669
Tx 890.10 Rx 845.10 Chan 0670 #670
Tx 890.13 Rx 845.13 Chan 0671 #671
Tx 890.16 Rx 845.16 Chan 0672 #672
Tx 890.19 Rx 845.19 Chan 0673 #673
Tx 890.22 Rx 845.22 Chan 0674 #674
Tx 890.25 Rx 845.25 Chan 0675 #675
Tx 890.28 Rx 845.28 Chan 0676 #676
Tx 890.31 Rx 845.31 Chan 0677 #677
Tx 890.34 Rx 845.34 Chan 0678 #678
Tx 890.37 Rx 845.37 Chan 0679 #679
Tx 890.40 Rx 845.40 Chan 0680 #680
Tx 890.43 Rx 845.43 Chan 0681 #681
Tx 890.46 Rx 845.46 Chan 0682 #682
Tx 890.49 Rx 845.49 Chan 0683 #683
Tx 890.52 Rx 845.52 Chan 0684 #684
Tx 890.55 Rx 845.55 Chan 0685 #685
Tx 890.58 Rx 845.58 Chan 0686 #686
Tx 890.61 Rx 845.61 Chan 0687 #687
Tx 890.64 Rx 845.64 Chan 0688 #688
Tx 890.67 Rx 845.67 Chan 0689 #689
Tx 890.70 Rx 845.70 Chan 0690 #690
Tx 890.73 Rx 845.73 Chan 0691 #691
Tx 890.76 Rx 845.76 Chan 0692 #692
Tx 890.79 Rx 845.79 Chan 0693 #693
Tx 890.82 Rx 845.82 Chan 0694 #694
Tx 890.85 Rx 845.85 Chan 0695 #695
Tx 890.88 Rx 845.88 Chan 0696 #696
Tx 890.91 Rx 845.91 Chan 0697 #697
Tx 890.94 Rx 845.94 Chan 0698 #698
Tx 890.97 Rx 845.97 Chan 0699 #699
Tx 891.00 Rx 846.00 Chan 0700 #700
Tx 891.03 Rx 846.03 Chan 0701 #701
Tx 891.06 Rx 846.06 Chan 0702 #702
Tx 891.09 Rx 846.09 Chan 0703 #703
Tx 891.12 Rx 846.12 Chan 0704 #704
Tx 891.15 Rx 846.15 Chan 0705 #705
Tx 891.18 Rx 846.18 Chan 0706 #706
Tx 891.21 Rx 846.21 Chan 0707 #707
Tx 891.24 Rx 846.24 Chan 0708 #708
Tx 891.27 Rx 846.27 Chan 0709 #709
Tx 891.30 Rx 846.30 Chan 0710 #710
Tx 891.33 Rx 846.33 Chan 0711 #711
Tx 891.36 Rx 846.36 Chan 0712 #712
Tx 891.39 Rx 846.39 Chan 0713 #713
Tx 891.42 Rx 846.42 Chan 0714 #714
Tx 891.45 Rx 846.45 Chan 0715 #715
Tx 891.48 Rx 846.48 Chan 0716 #716
Tx 891.51 Rx 846.51 Chan 0717 #717
Tx 891.54 Rx 846.54 Chan 0718 #718
Tx 891.57 Rx 846.57 Chan 0719 #719
Tx 891.60 Rx 846.60 Chan 0720 #720
Tx 891.63 Rx 846.63 Chan 0721 #721
Tx 891.66 Rx 846.66 Chan 0722 #722
Tx 891.69 Rx 846.69 Chan 0723 #723
Tx 891.72 Rx 846.72 Chan 0724 #724
Tx 891.75 Rx 846.75 Chan 0725 #725
Tx 891.78 Rx 846.78 Chan 0726 #726
Tx 891.81 Rx 846.81 Chan 0727 #727
Tx 891.84 Rx 846.84 Chan 0728 #728
Tx 891.87 Rx 846.87 Chan 0729 #729
Tx 891.90 Rx 846.90 Chan 0730 #730
Tx 891.93 Rx 846.93 Chan 0731 #731
Tx 891.96 Rx 846.96 Chan 0732 #732
Tx 891.99 Rx 846.99 Chan 0733 #733
Tx 892.02 Rx 847.02 Chan 0734 #734
Tx 892.05 Rx 847.05 Chan 0735 #735
Tx 892.08 Rx 847.08 Chan 0736 #736
Tx 892.11 Rx 847.11 Chan 0737 #737
Tx 892.14 Rx 847.14 Chan 0738 #738
Tx 892.17 Rx 847.17 Chan 0739 #739
Tx 892.20 Rx 847.20 Chan 0740 #740
Tx 892.23 Rx 847.23 Chan 0741 #741
Tx 892.26 Rx 847.26 Chan 0742 #742
Tx 892.29 Rx 847.29 Chan 0743 #743
Tx 892.32 Rx 847.32 Chan 0744 #744
Tx 892.35 Rx 847.35 Chan 0745 #745
Tx 892.38 Rx 847.38 Chan 0746 #746
Tx 892.41 Rx 847.41 Chan 0747 #747
Tx 892.44 Rx 847.44 Chan 0748 #748
Tx 892.47 Rx 847.47 Chan 0749 #749
Tx 892.50 Rx 847.50 Chan 0750 #750
Tx 892.53 Rx 847.53 Chan 0751 #751
Tx 892.56 Rx 847.56 Chan 0752 #752
Tx 892.59 Rx 847.59 Chan 0753 #753
Tx 892.62 Rx 847.62 Chan 0754 #754
Tx 892.65 Rx 847.65 Chan 0755 #755
Tx 892.68 Rx 847.68 Chan 0756 #756
Tx 892.71 Rx 847.71 Chan 0757 #757
Tx 892.74 Rx 847.74 Chan 0758 #758
Tx 892.77 Rx 847.77 Chan 0759 #759
Tx 892.80 Rx 847.80 Chan 0760 #760
Tx 892.83 Rx 847.83 Chan 0761 #761
Tx 892.86 Rx 847.86 Chan 0762 #762
Tx 892.89 Rx 847.89 Chan 0763 #763
Tx 892.92 Rx 847.92 Chan 0764 #764
Tx 892.95 Rx 847.95 Chan 0765 #765
Tx 892.98 Rx 847.98 Chan 0766 #766
Tx 893.01 Rx 848.01 Chan 0767 #767
Tx 893.04 Rx 848.04 Chan 0768 #768
Tx 893.07 Rx 848.07 Chan 0769 #769
Tx 893.10 Rx 848.10 Chan 0770 #770
Tx 893.13 Rx 848.13 Chan 0771 #771
Tx 893.16 Rx 848.16 Chan 0772 #772
Tx 893.19 Rx 848.19 Chan 0773 #773
Tx 893.22 Rx 848.22 Chan 0774 #774
Tx 893.25 Rx 848.25 Chan 0775 #775
Tx 893.28 Rx 848.28 Chan 0776 #776
Tx 893.31 Rx 848.31 Chan 0777 #777
Tx 893.34 Rx 848.34 Chan 0778 #778
Tx 893.37 Rx 848.37 Chan 0779 #779
Tx 893.40 Rx 848.40 Chan 0780 #780
Tx 893.43 Rx 848.43 Chan 0781 #781
Tx 893.46 Rx 848.46 Chan 0782 #782
Tx 893.49 Rx 848.49 Chan 0783 #783
Tx 893.52 Rx 848.52 Chan 0784 #784
Tx 893.55 Rx 848.55 Chan 0785 #785
Tx 893.58 Rx 848.58 Chan 0786 #786
Tx 893.61 Rx 848.61 Chan 0787 #787
Tx 893.64 Rx 848.64 Chan 0788 #788
Tx 893.67 Rx 848.67 Chan 0789 #789
Tx 893.70 Rx 848.70 Chan 0790 #790
Tx 893.73 Rx 848.73 Chan 0791 #791
Tx 893.76 Rx 848.76 Chan 0792 #792
Tx 893.79 Rx 848.79 Chan 0793 #793
Tx 893.82 Rx 848.82 Chan 0794 #794
Tx 893.85 Rx 848.85 Chan 0795 #795
Tx 893.88 Rx 848.88 Chan 0796 #796
Tx 893.91 Rx 848.91 Chan 0797 #797
Tx 893.94 Rx 848.94 Chan 0798 #798
Tx 893.97 Rx 848.97 Chan 0799 #799
Upper Set Part 2 (991-1023)
Tower Freq. Mobile Freq. 11xxxx# Channel
Tx 869.04 Rx 824.04 Chan 0991 #800
Tx 869.07 Rx 824.07 Chan 0992 #801
Tx 869.10 Rx 824.10 Chan 0993 #802
Tx 869.13 Rx 824.13 Chan 0994 #803
Tx 869.16 Rx 824.16 Chan 0995 #804
Tx 869.19 Rx 824.19 Chan 0996 #805
Tx 869.22 Rx 824.22 Chan 0997 #806
Tx 869.25 Rx 824.25 Chan 0998 #807
Tx 869.28 Rx 824.28 Chan 0999 #808
Tx 869.31 Rx 824.31 Chan 1000 #809
Tx 869.34 Rx 824.34 Chan 1001 #810
Tx 869.37 Rx 824.37 Chan 1002 #811
Tx 869.40 Rx 824.40 Chan 1003 #812
Tx 869.43 Rx 824.43 Chan 1004 #813
Tx 869.46 Rx 824.46 Chan 1005 #814
Tx 869.49 Rx 824.49 Chan 1006 #815
Tx 869.52 Rx 824.52 Chan 1007 #816
Tx 869.55 Rx 824.55 Chan 1008 #817
Tx 869.58 Rx 824.58 Chan 1009 #818
Tx 869.61 Rx 824.61 Chan 1010 #819
Tx 869.64 Rx 824.64 Chan 1011 #820
Tx 869.67 Rx 824.67 Chan 1012 #821
Tx 869.70 Rx 824.70 Chan 1013 #822
Tx 869.73 Rx 824.73 Chan 1014 #823
Tx 869.76 Rx 824.76 Chan 1015 #824
Tx 869.79 Rx 824.79 Chan 1016 #825
Tx 869.82 Rx 824.82 Chan 1017 #826
Tx 869.85 Rx 824.85 Chan 1018 #827
Tx 869.88 Rx 824.88 Chan 1019 #828
Tx 869.91 Rx 824.91 Chan 1020 #829
Tx 869.94 Rx 824.94 Chan 1021 #830
Tx 869.97 Rx 824.97 Chan 1022 #831
Tx 870.00 Rx 825.00 Chan 1023 #832
----------------------------------------------------------------------------
I got this from a bbs in the (708) are code. It had no name associated
with it. Since NOONE has mailed me any other info on it, I will keep this
in the bible until someone bitches or sends me something tangible.
-ML
MOTOROLA "TRIK-CLIP"
This is the plans I recieved for the Flip. Supposedly if one knew the
pinouts on the other moto phones one could transpose. (maybe!) I never
tested this so I don't know if it works. The chip in the flip the text
is talking about is a 32 pin square plcc
After Phone Disassembly Locate 27c512 Eprom on phone board. This is
On The Upper Right Side Of The Display Next To The Roam Indicator.
This Is a 32 pin Square device. **Note the dot and beveled edge
for pin orientation (the dot is pin 1) Count to the left
counter clock wise 2 3 4 5 and so on. To the Right or clockwise
of the dot is pin 32 Vcc. This will aid you in your count to find
pin 25 which is the eprom output enable. This pin is at ground or
Vss - Level. **Note Pin 25 on Eprom in phone must be lifted from
the phone board ground or Vss state. Use an X-acto Knife and or
soldering iron and tools to cut pin at board level where pin
narrows. Do not bend wide part of pin up on eprom as this could
break off of Eprom. Also Wide Part of pin Will be used to make
contact with eprom test clip adapter. The eprom test clip adapter
will take pin 25 to logic high through an 8 to 10 thousand
resistor to pin 32 Vcc. This will Gate off all data Commands from
the phone board eprom and allow the eprom test clip adaptor to
take over. **Note test clip could touch narrow part of cut off
pin on board and cause phone not to power up please remove or fold
down as low as possible so test clip only touches side of eprom.
After programing is complete put pin 25 back together or find a
suitable ground or Vss - source. The phone will power up and work
without pin 25 put back together but for long term precaution
put back to a logic zero or ground to enable the output enable.
To use the eprom test clip adapter pull the locking wedge on the
test clip into the upper postition. Seat the eprom test clip adapter
onto the eprom in the phone. Make sure to orient the dot and
beveled edge with each other. Push the locking wedge down to lock
the the eprom test clip adapter onto the eprom in the phone. Hook up
the programing cable to the computer and plug into the jack on the
base of the phone. Also hook up the loose lead with a jumper to the
center terminal between the battery contacts. Turn power on green
light on phone display should come on thgen a complete display test
will light up after that the no service will blink along with the
signal level mark in corner of display. If the antenna is still on
the phone it could change to roam or something else. I suggest
remove the antenna so the cell sight will not see you. If you do
not get a power on test with the display there are 3 possible
things (1) pin 25 on phone board is touching the test clip this
can be checked by looking with a volt meter at pin 25 where
resistor connects for 4 to 5 volts pos with reference to ground.
(2) Test clip is not sitting on chip good some times you have pull
the test clip up off of the eprom a 64th of an inch all the way
around. (3) there is corrupt data, Pull the eprom test clip off
Phone check to see if power on display is there.
Computer see if data or phone number or cell sight code or data
whole is ok I've seen the cell sight ID corrrupt and the phone play
dead on the power on test. The test clip sometimes needs
maintenance look at the gold pins.
Make sure all the pins are level with the edge of it. If not take
an X-acto or pin and lightly bend them out so they are along the
edge of the plastic of the test clip.
Always check to see if eprom in phone contacts are clean before
putting test clip on. **Note when test clip is on phone - only
change the ESN only. *The other data phone number lock and so on
can be changed without the test clip and and should be done so.
The software version in the test clip is 9148 you will see this in
the right corner of the computer. Sometimes the program will crash
during the ESN wright this will put all zeros in the ESN field
check the test clip try again. Sometimes I've had to do this 3 an 4
times. Also watch the phone display for codes I've seen at the end
of a wright the code (FO8) just before power down I've had no
problem there but during the key wright (FO8) means i've crashed.
Also during the time when the program is counting back into the
phone i've had (F1O) show up in the display of the phone this
problem means the next time you may not get the power on display
test pull test clip read phone check data to see if cell sight
code is corrupt or some other data correct try again. A word of
caution do not push on eprom on top of test clip as this could
seat eprom lower into adapter and cause bad contact. To remove
test clip pull locking wedge up to unlock the eprom test clip
adapter from the eprom in the phone. Continue pulling up to lift
the eprom test clip adapter from the eprom in the phone.
-----------------------------------------------------------------------------
DISCLAIMER: I, Mike Larsen, accept NO responsibility for people using any
info within this text for fraudulant purposes. I did not intend for the info
to be used towards fraud or theft of services. The main reason I spent
hundreds of hours creating and compiling this information is because
programming fees are BULLSHIT and they know it. If you notice, the 37#
command is no longer a mystery and Motorola is quite pissed I found out. I
"engineered" it from a floor manager or some other head at the Motorola
cellular division. "Big Deal" you say. Well, Motorola shipped Many flip
fones with that command set for a different battery. After 10 minutes of use
the phone would die. The phone had to be sent to Motorola to be "fixed."
If you found this text useful, please mail something interesting or
just let me know you appreciated my efforts. You can't believe how pissed
I was when I found out some lamer is changing the name in the text to his
own so people will like him or something. Have fun.
Oh, by the way, I forgot to mention in the above disclaimer that I do
nothing fraudulant with MY fone. I pay a bill and everything and can prove
it. So will the "feds" or whoever the Internet gestapo is that's been sending
me mail about me being under thier "watchful eye", please go for someone else
that's dealing child pornography or asking for WaReZ? Thanks.
Mike.Larsen@uti.com
stularsenmic@vax.colsf.edu
------------------------------------------------------------------------------