💾 Archived View for thingvellir.net › quakeworld-protocol.gmi captured on 2023-11-14 at 07:51:41. Gemini links have been rewritten to link to archived content

View Raw

More Information

➡️ Next capture (2023-12-28)

-=-=-=-=-=-=-

Unofficial QuakeWorld v28 Protocol Spec

Preface

The information in this document is mostly sourced from the GPLv2 QuakeWorld source code. I'm not sure if that means this document counts as being a derivative of a GPL-ed work, so take caution if you plan to write an implementation of this protocol. This document does not contain any of the original source code. I am not a lawyer. To anyone who knows more on the subject, please get in contact with me.

Quake is a trademark of ZeniMax Media, Inc.

Type Names

• [U8]: An unsigned 8-bit integer.
• [I16]: A two's-compliment-signed 16-bit integer in little-endian byte order.
• [I32]: A two's-compliment-signed 32-bit integer in little-endian byte order.
• [F32]: A IEE 754-2008 single-precision floating point number in little-endian byte order.
• [StrLine]: An 8-bit ASCII string terminated with $0A $00.
• [StrNul]: An 8-bit ASCII string terminated with $00.
• [Pos]: A two's-compliment-signed, 13.3 fixed point, 16-bit integer in little-endian byte order.
• [Angle8]: An unsigned 8-bit integer. It encodes 1/256th of one full rotation.
• [Angle16]: An unsigned 16-bit integer in little-endian byte order. It encodes 1/65536th of one full rotation.
• [Scale16]: A two's-compliment-signed 16-bit integer in little-endian byte order. It the fractions of 1/32768 between -1.0 and 1.0.
• [Control]: A variably-sized structure. See below.

[Control] Structure

The first byte is a [U8] bitfield describing which portions of the movement update have been sent.

• Bit 0: Rotation on X
• Bit 1: Rotation on Z
• Bit 2: Forward/Backward Movement Axis
• Bit 3: Left/Right Movement Axis
• Bit 4: Up/Down Movement Axis
• Bit 5: 8 binary button states (only two of which are used by vanilla)
• Bit 6: 'Impulse' code, 255 one-time events that can be bound to keys or pad buttons
• Bit 7: Rotation on Y

It is then followed by output of this procedure (which isn't in the same order as the bits above):

• If bit 0 is set, an [Angle16] for the player's rotation X axis is sent.
• If bit 7 is set, an [Angle16] for the player's rotation Y axis is sent.
• If bit 1 is set, an [Angle16] for the player's rotation Z axis is sent.
• If bit 2 is set, a [Scale16] for the player's forward/backward movement axis is sent.
• If bit 3 is set, a [Scale16] for the player's left/right movement axis is sent.
• If bit 4 is set, a [Scale16] for the player's up/down movement axis is sent. (Normally only applies when the player is swimming in a fluid)
• If bit 5 is set, a [U8] containing a bitmask of the player's pressed buttons is sent. Bit 0 is for the attack button, and bit 1 for the jump button. The other bits are unused by the vanilla implementations.
• If bit 6 is set, a [U8] containing the player's current 'impulse' code is sent.

Checksums

QW28 uses a CRC16 checksum in many places using the CRC-16-CCITT prime 4129.

Transport

QW28 uses UDP/IP, on port 27500 by default.

'Out-of-band' Packets

Out-of-band packets begin with the [I32] value -1, immediately followed by data.

Regular Packets

Packets begin with a header of two [I32] values. Both use the first 31 bits as a monotonic packet counter used to detect dropped packets, and the 32nd bit is used for marking attempted reliable transport. Clients will also append an [I16] receiving port number as part of this header when sending these.

After this header is a single opcode [U8], then the packet data.

Connection Handshake

• The client sends an out-of-band packet containing the [StrLine] 'getchallenge'.
• The server responds with an out-of-band packet containing [U8] $63, followed by [U8] $20, then a [StrLine] containing implementation-specific integer value.
• The client sends an out-of-band packet containing [U8] $1C, followed by a [StrLine] containing 'connect 28 PORT CHALLENGE "USERINFO"'. 'PORT' being the port the client is connecting with, 'CHALLENGE' being the value received from the server. The content of the 'USERINFO' part is described later in the document. The ASCII double-quotes are part of the string that is sent; They are presumably there to prevent any spaces inside the info string from being interpreted as a separate command argument internally in the vanilla engine.
• If the server allows the client to join, it responds with an out-of-band packet containing [U8] $6A.
• If the server rejects the client, it responds with an out-of-band packet containing [U8] $6E, followed by the reason for rejection as a [Str].

Client-to-Server Packet Types

Packet ID numbers not listed here are invalid.

1: No-op

There is no data. Nothing happens.

3: Player Movement [Checksum?: U8, Drop Percent: U8, Millisec?: U8, Data: Control]

4: Player Text [Text: StrLine]

This packet is used for communicating console commands and chat messages to the server.

The vanilla client sends three reliable player text packets containing [StrNul] "drop" before dropping its connection.

5: Delta Update Request? [Unknown: U8]

Not sure yet.

6: Arbitrary Camera Position? [X: Pos, Y: Pos, Z: Pos]

This packet contains three Pos values. It seems to be used in spectator mode by the client to request viewing a certain position?

7: Data Upload? [Size: I16, Percent: U8, Data: U8…]

This seems to be a vestige of some past protocol feature. I'm not aware of any official use for this.

Info String

This is a simple key-value pair format separated by ASCII $5C.

Each pair begins with a backslash, then the key string, another backslash, then the value. Keys and values are limited to 63 bytes long.

Pairs with keys starting with ASCII $2A are derived from certain values and cannot be set by the player.

Some implementations also include empty pairs in this string, so beware when parsing it.

\*ver\2.40-8860\noaim\0\msg\1\rate\2500\bottomcolor\0\topcolor\0\team\My Cool Team\name\Cool Person\*ip\quakeworld.example

• '*ver' is the version of the client software. Some implementations also put their name here. The vanilla server doesn't check this.
• '*ip' is the hostname the client is connecting to. The vanilla server doesn't check this.
• 'noaim' appears to have been a mechanism for opting out of serverside aim assist. It doesn't appear to actually do anything anymore.
• 'msg' is the player's preferred message priority. Text messages sent with a priority lower than this will be hidden from the player.
• 'rate' is how many packets per second the client is willing to send or receive.
• 'topcolor' and 'bottomcolor' are player-selectable color palettes used on their player model. These cannot be below 0 or above 13.
• 'team' is the name of the player's team.
• 'name' is the player's in-game nickname, visible on the leaderboard.
• Some implementations also include others not listed here.

Server-to-Client Packet Types

Packet ID numbers not listed here are invalid. The apparent gaps in opcode numbers are obsolete remnants of older protocol revisions.

1: No-op

Nothing happens. There is no packet data.

2: Disconnect

Sent to the client to tell them they've been disconnected and should stop sending packets. There is no packet data.

3: Set Stat A [Stat ID: U8, Value: U8]

Updates the health, armor, and ammo values displayed on the client. The first [U8] is which stat to be updated, the second [U8] is the value to set it to.

6: Play Sound [Channel: I16, …, Sample: U8, X: Pos, Y: Pos, Z: Pos]

The first [I16] contains the target audio channel as well as two bitflags.

• If bit 15 is set, a [U8] is sent for the sound volume, 255 being maximum volume.
• If bit 14 is set, a [U8] is sent containing a 2.6 fixed-point attenuation value.

The second [U8] contains an identifier for the sound sample being played. These identifiers are set up by a caching system.

The last three [Pos] values are the position of the sound being played.

8: Print [Priority: U8, Text: StrLine]

9: Client Command [Command: StrLine]

Runs a console command on the client. You should not use this packet lightly.

10: Set View Angle [X: Angle8, Y: Angle8, Z: Angle8]

11: Server Info [Protocol: I32, Connected Clients: I32, Client Slot: U8, Level Name: StrNul, Gravity: F32, Stop Speed: F32, Max Speed: F32, Max Spectator Speed: F32, Acceleration: F32, Air Acceleration: F32, Water Acceleration: F32, Friction: F32, Water Friction: F32, Other Gravity?: F32]

The vanilla client will only accept a protocol version of 26, 27, or 28.

If the 7th bit of the client slot is set, the client will expect to be spawned as a spectator rather than a player.

After receiving this packet, the vanilla client immediately sends a player text packet to retreive a list of sound sample identifiers.

12: Light Flicker Pattern [ID: U8, Pattern: StrNul]

14: Set Player Frags [Client ID: U8, Frags: I16]

16: Stop Sound [Data: I16]

The first three bits of the data field is the sound channel, and the rest of the bits are the ID of the object that is producing the sound.

19: Player Damage [Armor Damage: U8, Health Damage: U8, Source X: Pos, Source Y: Pos, Source Z: Pos]

Does not actually affect the player's health or armor values. This packet is used for the screen effects that play when a player is damaged.

20: Spawn Static Object [Model ID: U8, Animation Frame: U8, Palette Map: U8, Skin ID: U8, Position X: Pos, Rotation X: Angle8, Position Y: Pos, Rotation Y: Angle8, Position Z: Pos, Rotation Z: Angle8]

22: Spawn Normal Object [Model ID: U8, Animation Frame: U8, Palette Map: U8, Skin ID: U8, Position X: Pos, Rotation X: Angle8, Position Y: Pos, Rotation Y: Angle8, Position Z: Pos, Rotation Z: Angle8]

23: Spawn Particle Effect [Kind: U8, …]

The content of this packet is dependent on the value of the 'kind' field.

Some of these effects also play sound effects on the vanilla client.

The separate 'lightning bolt' effects only differ in using a different model variant on the vanilla client.

• Type 0: Regular Nail Puff [X: Pos, Y: Pos, Z: Pos]
• Type 1: Super Nail Puff [X: Pos, Y: Pos, Z: Pos]
• Type 2: Bullet Puff [Number of particles: U8, X: Pos, Y: Pos, Z: Pos]
• Type 3: Explosion [X: Pos, Y: Pos, Z: Pos]
• Type 4: Blob Explosion [X: Pos, Y: Pos, Z: Pos]
• Type 5: Lightning Bolt A [Source Object: I16, Start X: Pos, Start Y: Pos, Start Z: Pos, End X: Pos, End Y: Pos, End Z: Pos]
• Type 6: Lightning Bolt B [Source Object: I16, Start X: Pos, Start Y: Pos, Start Z: Pos, End X: Pos, End Y: Pos, End Z: Pos]
• Type 7: 'Wizard' Nail Puff [X: Pos, Y: Pos, Z: Pos]
• Type 8: 'Knight' Nail Puff [X: Pos, Y: Pos, Z: Pos]
• Type 9: Lightning Bolt C [Source Object: I16, Start X: Pos, Start Y: Pos, Start Z: Pos, End X: Pos, End Y: Pos, End Z: Pos]
• Type 10: Lava Splash [X: Pos, Y: Pos, Z: Pos]
• Type 11: Teleporter Sparkles [X: Pos, Y: Pos, Z: Pos]
• Type 12: Blood Splat [Number of particles: U8, X: Pos, Y: Pos, Z: Pos]
• Type 13: Electric Splat [X: Pos, Y: Pos, Z: Pos]

24: Set Paused [Enable: U8]

Pauses the current music track, displays an indicator on the screen, and prevents player movement.

26: Announcement [Text: StrNul]

Displays text in the center of the client's screen.

27: Increment 'Monsters Killed' Stat

28: Increment 'Secrets Found' Stat

29: Play Ambient Sound [X: Pos, Y: Pos, Z: Pos, Sample ID: U8, Volume: U8, Attenuation: U8]

30: End of Level Intermission [View Position X: Pos, View Position Y: Pos, View Position Z: Pos, View Angle X: Angle8, View Angle Y: Angle8, View Angle Z: Angle8]

Sets the client's view position and shows a leaderboard. The client can only leave this state when the map changes.

31: End of Episode Intermission [Text: StrNul]

Prevents player movement and slowly types out text to the center of the screen. The vanilla client also shows a 'Congratulations' header on screen. The client can only leave this state when the map changes.

32: Play Music Track [Track ID: U8]

Originally used to play tracks from a physical CD. Track 0 is not allowed.

33: Registration Info Screen

The vanilla client displays the first page of the help screen.

34: Small View Punch

35: Large View Punch

36: Set Ping [Client ID: U8, Ping: I16]

Sets a player's ping value in the scoreboard.

37: Set Join Time [Client ID: U8, Seconds: F32]

Sets how long a player has been connected.

38: Set Stat B [Stat ID: U8, Value: I32]

Similar to Set Stat A, but with a 32-bit value instead of an 8-bit one.

39: Muzzle Flash Light

Flashes a dynamic light centered on the player's position for 0.1 seconds on the vanilla client.

40: User Info Update [Client ID: U8, 'User ID'?: I32, Info: StrNul]

41: Download [Size: I16, Data: U8…]

42: Player Info [Client ID: U8, Bitflags: I16, X: Pos, Y: Pos, Z: Pos, Animation Frame: U8, …]

• If bit 0 is set, a [U8] is sent containing the milliseconds since the last movement.
• If bit 1 is set, a [Control] structure is sent.
• If bit 2 is set, a [I16] for the velocity X component is sent.
• If bit 3 is set, a [I16] for the velocity Y component is sent.
• If bit 4 is set, a [I16] for the velocity Z component is sent.
• If bit 5 is set, a [U8] for a custom model ID is sent.
• If bit 6 is set, a [U8] for the model's skin ID is sent.
• If bit 7 is set, a [U8] is sent for 'effects'?
• If bit 8 is set, a [U8] is sent for the weapon view model animation frame.
• If bit 9 is set, the player becomes intangible.
• If bit 10 is set, the player's view is offset?
• If bit 11 is set, the player has gravity disabled?

43: Spawn Projectile [Number of projectiles: U8, TODO]

This packet is a mess of bit ops.

44: 'Choke Count' [Number of 'choked' packets: U8]

45: Model ID List [Number of models: U8, TODO]

46: Sound ID List [Number of sounds: U8, TODO]

47: Object Update [TODO]

Another mess.

This is an example of why you should prefer statically-sized packets over variably-sized ones when designing net protocols.

48: Delta Object Update [TODO]

Another mess.

From what I've seen, pretty much the same as 47 Object Update but has a [U8] at the start.

49: Set Max Speed [Value: F32]

50: Set Gravity [Value: F32]

51: Set User Info Key [Client ID: U8, Key: StrNul, Value: StrNul]

52: Set Server Info Key [Key: StrNul, Value: StrNul]

53: Update 'pl' Value? [Client ID: U8, pl?: U8]