💾 Archived View for spam.works › mirrors › textfiles › computers › xtformat.txt captured on 2023-11-14 at 09:15:43.
⬅️ Previous capture (2023-06-14)
-=-=-=-=-=-=-
.BAT and .TXT files for DOS 2.0
for use with hard disk.
+---------------------------------------+
| |
| FORMAT utility for the |
| |
| IBM-XT with DOS 2.0. |
| |
| by Burgess Allison |
| |
+---------------------------------------+
This is a method for protecting your
hard disk from being accidentally erased
by IBM's FORMAT command. If you loaded
DOS onto the hard disk, then enter the
FORMAT command with no parameters, it
automatically begins erasing the default
drive. If you're in C: you're in trouble.
Instructions for using the utility
are explained in the batch file.
To install the utility, create a
sub-directory called PCDOS:
MD PCDOS <return>
CD PCDOS <return>
Copy the FORMAT.BAT file into this
directory. Create, from within PCDOS, a
sub-directory called FORMAT:
MD FORMAT <return>
CD FORMAT <return>
Create, from within FORMAT, another
sub-directory called SAFETY:
MD SAFETY <return>
CD SAFETY <return>
Copy the FORMAT.COM command from
your DOS 2.0 diskette into this sub-
directory, but name the newly-created
file XYZZY.COM. Copy the three FORMAT.
TX* files into this sub-directory.
Then either put a PATH C:\PCDOS
command in your AUTOEXEC.BAT, or leave
the FORMAT.BAT file out in the root
directory.
Obviously, you don't have to use any
of the names I used, but those are the
names referenced in the batch file.
By way of explanation, I have all my
DOS files (with .COM or .BAT extensions)
stored in the PCDOS subdirectory. By
using a PATH command in AUTOEXEC.BAT, I
have access to all those commands without
having to fill up the root directory.
Good luck.
Burgess Allison
??????????????????????????????????????????????????????????????????????????????
? ?
? This FORMAT command has been developed for the IBM-XT ?
? to protect against accidental erasure of the hard disk. ?
? ?
? It will only format diskettes in drive A: ?
? ?
? Use the FORMAT command just as described in DOS 2.0, ?
? but do not specify the A: drive. That parameter is ?
? automatically forced. ?
? ?
??????????????????????????????????????????????????????????????????????????????
Sample batch job follows....
ECHO OFF
TYPE \PCDOS\FORMAT\SAFETY\FORMAT.TX1
ECHO The FORMAT command you have specified is: FORMAT A:%1
TYPE \PCDOS\FORMAT\SAFETY\FORMAT.TX2
PAUSE
TYPE \PCDOS\FORMAT\SAFETY\FORMAT.TX3
PATH C:\;C:\PCDOS;C:\PCDOS\FORMAT\SAFETY
XYZZY A:%1
ECHO ON
PATH C:\;C:\PCDOS