š¾ Archived View for gmi.noulin.net āŗ man āŗ man2 āŗ init_module.2.gmi captured on 2023-11-14 at 08:26:34. Gemini links have been rewritten to link to archived content
ā¬ ļø Previous capture (2023-09-08)
-=-=-=-=-=-=-
INIT_MODULE(2) Linux Programmer's Manual INIT_MODULE(2)
NAME
init_module, finit_module - load a kernel module
SYNOPSIS
#include <linux/module.h> /* Definition of MODULE_* constants */
#include <sys/syscall.h> /* Definition of SYS_* constants */
#include <unistd.h>
int syscall(SYS_init_module, void *module_image, unsigned long len,
const char *param_values);
int syscall(SYS_finit_module, int fd, const char *param_values,
int flags);
Note: glibc provides no wrappers for these system calls, necessitating the use of syscall(2).
DESCRIPTION
init_module() loads an ELF image into kernel space, performs any necessary symbol relocations, initializes module parameters to values provided by the caller,
and then runs the module's init function. This system call requires privilege.
The module_image argument points to a buffer containing the binary image to be loaded; len specifies the size of that buffer. The module image should be a valid
ELF image, built for the running kernel.
The param_values argument is a string containing space-delimited specifications of the values for module parameters (defined inside the module using modā
ule_param() and module_param_array()). The kernel parses this string and initializes the specified parameters. Each of the parameter specifications has the
form:
name[=value[,value...]]
The parameter name is one of those defined within the module using module_param() (see the Linux kernel source file include/linux/moduleparam.h). The parameter
value is optional in the case of bool and invbool parameters. Values for array parameters are specified as a comma-separated list.
finit_module()
The finit_module() system call is like init_module(), but reads the module to be loaded from the file descriptor fd. It is useful when the authenticity of a
kernel module can be determined from its location in the filesystem; in cases where that is possible, the overhead of using cryptographically signed modules to
determine the authenticity of a module can be avoided. The param_values argument is as for init_module().
The flags argument modifies the operation of finit_module(). It is a bit mask value created by ORing together zero or more of the following flags:
MODULE_INIT_IGNORE_MODVERSIONS
Ignore symbol version hashes.
MODULE_INIT_IGNORE_VERMAGIC
Ignore kernel version magic.
There are some safety checks built into a module to ensure that it matches the kernel against which it is loaded. These checks are recorded when the module is
built and verified when the module is loaded. First, the module records a "vermagic" string containing the kernel version number and prominent features (such as
the CPU type). Second, if the module was built with the CONFIG_MODVERSIONS configuration option enabled, a version hash is recorded for each symbol the module
uses. This hash is based on the types of the arguments and return value for the function named by the symbol. In this case, the kernel version number within
the "vermagic" string is ignored, as the symbol version hashes are assumed to be sufficiently reliable.
Using the MODULE_INIT_IGNORE_VERMAGIC flag indicates that the "vermagic" string is to be ignored, and the MODULE_INIT_IGNORE_MODVERSIONS flag indicates that the
symbol version hashes are to be ignored. If the kernel is built to permit forced loading (i.e., configured with CONFIG_MODULE_FORCE_LOAD), then loading continā
ues, otherwise it fails with the error ENOEXEC as expected for malformed modules.
RETURN VALUE
On success, these system calls return 0. On error, -1 is returned and errno is set to indicate the error.
ERRORS
EBADMSG (since Linux 3.7)
Module signature is misformatted.
EBUSY Timeout while trying to resolve a symbol reference by this module.
EFAULT An address argument referred to a location that is outside the process's accessible address space.
ENOKEY (since Linux 3.7)
Module signature is invalid or the kernel does not have a key for this module. This error is returned only if the kernel was configured with CONFIG_MODā
ULE_SIG_FORCE; if the kernel was not configured with this option, then an invalid or unsigned module simply taints the kernel.
ENOMEM Out of memory.
EPERM The caller was not privileged (did not have the CAP_SYS_MODULE capability), or module loading is disabled (see /proc/sys/kernel/modules_disabled in
proc(5)).
The following errors may additionally occur for init_module():
EEXIST A module with this name is already loaded.
EINVAL param_values is invalid, or some part of the ELF image in module_image contains inconsistencies.
ENOEXEC
The binary image supplied in module_image is not an ELF image, or is an ELF image that is invalid or for a different architecture.
The following errors may additionally occur for finit_module():
EBADF The file referred to by fd is not opened for reading.
EFBIG The file referred to by fd is too large.
EINVAL flags is invalid.
ENOEXEC
fd does not refer to an open file.
In addition to the above errors, if the module's init function is executed and returns an error, then init_module() or finit_module() fails and errno is set to
the value returned by the init function.
VERSIONS
finit_module() is available since Linux 3.8.
CONFORMING TO
init_module() and finit_module() are Linux-specific.
NOTES
The init_module() system call is not supported by glibc. No declaration is provided in glibc headers, but, through a quirk of history, glibc versions before
2.23 did export an ABI for this system call. Therefore, in order to employ this system call, it is (before glibc 2.23) sufficient to manually declare the interā
face in your code; alternatively, you can invoke the system call using syscall(2).
Information about currently loaded modules can be found in /proc/modules and in the file trees under the per-module subdirectories under /sys/module.
See the Linux kernel source file include/linux/module.h for some useful background information.
Linux 2.4 and earlier
In Linux 2.4 and earlier, the init_module() system call was rather different:
#include <linux/module.h>
int init_module(const char *name, struct module *image);
(User-space applications can detect which version of init_module() is available by calling query_module(); the latter call fails with the error ENOSYS on Linux
2.6 and later.)
The older version of the system call loads the relocated module image pointed to by image into kernel space and runs the module's init function. The caller is
responsible for providing the relocated image (since Linux 2.6, the init_module() system call does the relocation).
The module image begins with a module structure and is followed by code and data as appropriate. Since Linux 2.2, the module structure is defined as follows:
struct module {
unsigned long size_of_struct;
struct module *next;
const char *name;
unsigned long size;
long usecount;
unsigned long flags;
unsigned int nsyms;
unsigned int ndeps;
struct module_symbol *syms;
struct module_ref *deps;
struct module_ref *refs;
int (*init)(void);
void (*cleanup)(void);
const struct exception_table_entry *ex_table_start;
const struct exception_table_entry *ex_table_end;
#ifdef __alpha__
unsigned long gp;
#endif
};
All of the pointer fields, with the exception of next and refs, are expected to point within the module body and be initialized as appropriate for kernel space,
that is, relocated with the rest of the module.
SEE ALSO
create_module(2), delete_module(2), query_module(2), lsmod(8), modprobe(8)
Linux 2021-03-22 INIT_MODULE(2)