💾 Archived View for spam.works › mirrors › textfiles › hacking › ibm-vm70.txt captured on 2023-11-04 at 13:22:37.
⬅️ Previous capture (2023-06-14)
-=-=-=-=-=-=-
A Beginner's Guide to:
The IBM VM/370
(or what to do once you've gotten in)
A monograph by Elric of Imrryr
Presented by Lunatic Labs UnLimted.
KopyRite (K) 1986
RePrint what you like
Note: This file is formatted for printing
on a 80 Column, 55 line printer.
PREFACE: What this guide is about.
This was written to help Hackers learn to basics of how to function on an
IBM VM/370. Not as a guide on how to get in, but on how to use it one
you have gotten in.
Comments on this are welcome at RIPCO 312-528-5020.
Note: To VM/370 Hackers, feel free to add to this file, just give myself
& Lunatic Labs credit for our parts.
PART 1: Logging in & out
When you connect to a VM/370 system hit RETURN till you see:
VM/370
!
To logon you type:
logon userid ('logon' may be abbreviated to 'l')
If you enter an invalid userid, It will respond with a message:
'userid not in cp directory'.
If it is valid you with get:
ENTER PASSWORD:
Enter your password, then your in, hopefully....
Logging Out:
Type:
log
PART 2: Loading CMS & Getting set up
When you logon, if you do not see the message 'VM/SP CMS - (date) (time)
you will need to load 'CMS' (CMS in a command interpreter).
Type:
cp ipl cms
You should then see something like this:
R; T=0.01/0.01 08:05:50
Now you will be able to use both CP & CMS commands...
Some system my think you are using an IBM 3270 Terminal, if you can
emulate a 3270 (for example with Crosstalk) do so, if not type:
set terminal typewriter or set terminal dumb
PART 3: Files
You can list your files by typing:
filelist
Wildcards can be used, so:
filelist t*
list all files beginning with a 't'.
Filenames are made up of a FILENAME and FILETYPE
You can list a file by typing:
listfile filename filetype
Other file commands are: copyfile, erase, and rename, they all work with
FILENAME FILETYPE.
PART 4: Editing your files
I'm going to keep this down to the basics and only discuss one editor
XEDIT. To use XEDIT type:
xedit filename filetype
Once in XEDIT, enter the command 'input' to enter text, hit a RETURN on
a blank line to return to command mode, then enter the command 'FILE' to
save your file.
PART 5: Communicating with others on the system
Sending & receiving 'NOTES':
To send a 'NOTE' to another user type:
note userid
You will then be in the XEDIT subsystem, see PART 4.
Once you are done writing your NOTE, save the file and type:
send note
This will send the NOTE to userid.
You can also use the SEND command to send other files by typing:
send filename filetype userid.
Sending messages:
You can use the TELL command to communicate with a user who is current
logged on, type:
tell userid Help me!
PART 6: Getting Help
Type:
help
That's it, good luck.