💾 Archived View for bobignou.red › posts › Running-this-server.gmi captured on 2023-09-28 at 15:48:34. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
Multiples tools and components are used in this server to make it run and accessible from the internet. I want to describe them here to help me reconfigure a similar server in the future if needed. It might also be useful to anyone searching to run a similar web server themselves.
In order to easily access the server for the outside, a domain name is very handy I purchased bobignou.red at Namecheap[1]. There is a lot of other alternatives but I am telling you that because I use some of their other services.
As I don't have a static IP address, linking the domain name to my IP address is not trivial. I have to rely on dynamic DNS.
To do so, I use a combination of Namecheap's advanced DNS and DDclient.
On the page to manage a domain name in the Namecheap website, there is an 'Advanced DNS' page. At the bottom of this page, there is a 'Dynamic DNS' category. Firstly, you should enable it with the little oval button. You are given a Dynamic DNS Password, write it down. Lastly, you must add a record for each subdomain you want to use. To do so, press the 'add new record' button. Under the 'Host' column, you can write the name of the subdomain (for example, `@` for `bobignou.red` or `www` for `www.bobignou.red`) and you should write a dummy IP in the 'Value' column.
On the server, install DDclient. You configure it with the configuration file `/etc/ddclient.conf`. To configure a subdomain, write the following configuration:
use=web, web=dynamicdns.park-your-domain.com/getip protocol=namecheap server=dynamicdns.park-your-domain.com login=<domain name> password='<Dynamic DNS Password>' <Host1>, <Host2>, ...
Then, you can start dd client with systemd through the commands `systemctl enable ddclient` and `systemctl start ddclient`. You can check that it works well in two ways.
In order to use HTTPS, you need SSL certificates. Fortunately, a tool named certbot made by let's encrypt makes it really easy to get. You just need to install certbot that is probably in your distribution's repository. Before starting, you must make sure that using your domain name, one can reach your server (you must enable port forwarding in your router for ports 80 and 443) and that no program uses those ports on your server.
Then you just have to type the command `certbot certonly --standalone -d <your first domain name> -d <your second domain name> ...` and follow the steps.
I use Nginx as the webserver. Each interface is in a `server` block. All those blocks are in a `http` block. I did not customize the `http` block, I kept the default one which work. The files for these blocks are in the folder `/srv/data/www/blog`. The layout of the file system is the same as the layout of the website.
On port 80, I present the site in HTTP, under the domain name `bobignou.red`. The configuration is the following:
server {
listen 80;
index index.html;
server_name bobignou.red;
root /srv/data/www/blog;
location / {
try_files $uri $uri/ =404;
}
}
The configuration is extremely simple because the layout of the file system is the same as the one of the website.
As I also want to redirect `www.bobignou.red` to this website, I used a reverse proxy whose configuration is the following:
server {
listen 80;
server_name www.bobignou.red;
location / {
proxy_pass http://bobignou.red;
}
}
Once again, it is very simple.
As we are in the 21st century, I wanted to also present an HTTPS server. Its configuration is the following:
server {
listen 443 ssl;
server_name bobignou.red;
ssl_certificate /etc/letsencrypt/live/bobignou.red/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/bobignou.red/privkey.pem;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers HIGH:!aNULL:!MD5;
index index.html;
root /srv/data/www/blog;
location / {
try_files $uri $uri/ =404;
}
}
The configuration is very similar to the one in the HTTP server but there is a lot of extra info needed to enable SSL. It is still very easy to do.
To acces `www.bobignou.red` with SSL, I used a reverse proxy that re-route the SSL-encripted trafic to the HTTP server at `bobignou.red`. Here is the configuration:
server {
listen 443 ssl;
server_name www.bobignou.red;
ssl_certificate /etc/letsencrypt/live/bobignou.red/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/bobignou.red/privkey.pem;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers HIGH:!aNULL:!MD5;
location / {
proxy_pass http://bobignou.red:80;
}
}
On this server, I also run `cyberland.bobignou.red` which is powered by Flask. Setting it up is a bit more tricky than the blog.
To ensure the Cyberland server is always on, I want it to start when the computer starts. To do so, I wrote a simple systemd service file:
[Unit] Description=Starts the cyberland server After=network.target [Service] Type=simple User=root Group=root WorkingDirectory=/srv/data/www/cyberland ExecStart=/srv/data/www/cyberland/cyberland.py Restart=on-failure [Install] WantedBy=multi-user.target
I can then save it as `/etc/systemd/system/cyberland.service` and have it start with the computer thanks to the command `systemctl enable cyberland`.
Linking the Flask server to the outside work is made with a Nginx reverse proxy. The configuration is the following:
# HTTP server for Cyberland
server {
listen 80;
server_name cyberland.bobignou.red;
location / {
proxy_pass http://127.0.0.1:8901;
}
}
# HTTPS server for Cyberland
server {
listen 443 ssl;
server_name cyberland.bobignou.red;
ssl_certificate /etc/letsencrypt/live/bobignou.red/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/bobignou.red/privkey.pem;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers HIGH:!aNULL:!MD5;
location / {
proxy_pass http://127.0.0.1:8901;
}
}
It looks a lot like the configuration of the reverse proxy for the blog.
The pages in the website are generated with a custom python script that can be seen at the website's repository[2].
2: https://git.bobignou.red/www.bobignou.red