💾 Archived View for gmi.noulin.net › man › man2 › link.2.gmi captured on 2023-09-28 at 16:50:45. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
LINK(2) Linux Programmer's Manual LINK(2)
NAME
link, linkat - make a new name for a file
SYNOPSIS
#include <unistd.h>
int link(const char *oldpath, const char *newpath);
#include <fcntl.h> /* Definition of AT_* constants */
#include <unistd.h>
int linkat(int olddirfd, const char *oldpath,
int newdirfd, const char *newpath, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
linkat():
Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE
DESCRIPTION
link() creates a new link (also known as a hard link) to an existing file.
If newpath exists, it will not be overwritten.
This new name may be used exactly as the old one for any operation; both names refer to the same file (and so have the same permissions and ownership) and it is
impossible to tell which name was the "original".
linkat()
The linkat() system call operates in exactly the same way as link(), except for the differences described here.
If the pathname given in oldpath is relative, then it is interpreted relative to the directory referred to by the file descriptor olddirfd (rather than relative
to the current working directory of the calling process, as is done by link() for a relative pathname).
If oldpath is relative and olddirfd is the special value AT_FDCWD, then oldpath is interpreted relative to the current working directory of the calling process
(like link()).
If oldpath is absolute, then olddirfd is ignored.
The interpretation of newpath is as for oldpath, except that a relative pathname is interpreted relative to the directory referred to by the file descriptor
newdirfd.
The following values can be bitwise ORed in flags:
AT_EMPTY_PATH (since Linux 2.6.39)
If oldpath is an empty string, create a link to the file referenced by olddirfd (which may have been obtained using the open(2) O_PATH flag). In this
case, olddirfd can refer to any type of file except a directory. This will generally not work if the file has a link count of zero (files created with
O_TMPFILE and without O_EXCL are an exception). The caller must have the CAP_DAC_READ_SEARCH capability in order to use this flag. This flag is Linux-
specific; define _GNU_SOURCE to obtain its definition.
AT_SYMLINK_FOLLOW (since Linux 2.6.18)
By default, linkat(), does not dereference oldpath if it is a symbolic link (like link()). The flag AT_SYMLINK_FOLLOW can be specified in flags to cause
oldpath to be dereferenced if it is a symbolic link. If procfs is mounted, this can be used as an alternative to AT_EMPTY_PATH, like this:
linkat(AT_FDCWD, "/proc/self/fd/<fd>", newdirfd,
newname, AT_SYMLINK_FOLLOW);
Before kernel 2.6.18, the flags argument was unused, and had to be specified as 0.
See openat(2) for an explanation of the need for linkat().
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is set to indicate the error.
ERRORS
EACCES Write access to the directory containing newpath is denied, or search permission is denied for one of the directories in the path prefix of oldpath or
newpath. (See also path_resolution(7).)
EDQUOT The user's quota of disk blocks on the filesystem has been exhausted.
EEXIST newpath already exists.
EFAULT oldpath or newpath points outside your accessible address space.
EIO An I/O error occurred.
ELOOP Too many symbolic links were encountered in resolving oldpath or newpath.
EMLINK The file referred to by oldpath already has the maximum number of links to it. For example, on an ext4(5) filesystem that does not employ the dir_index
feature, the limit on the number of hard links to a file is 65,000; on btrfs(5), the limit is 65,535 links.
ENAMETOOLONG
oldpath or newpath was too long.
ENOENT A directory component in oldpath or newpath does not exist or is a dangling symbolic link.
ENOMEM Insufficient kernel memory was available.
ENOSPC The device containing the file has no room for the new directory entry.
ENOTDIR
A component used as a directory in oldpath or newpath is not, in fact, a directory.
EPERM oldpath is a directory.
EPERM The filesystem containing oldpath and newpath does not support the creation of hard links.
EPERM (since Linux 3.6)
The caller does not have permission to create a hard link to this file (see the description of /proc/sys/fs/protected_hardlinks in proc(5)).
EPERM oldpath is marked immutable or append-only. (See ioctl_iflags(2).)
EROFS The file is on a read-only filesystem.
EXDEV oldpath and newpath are not on the same mounted filesystem. (Linux permits a filesystem to be mounted at multiple points, but link() does not work across
different mounts, even if the same filesystem is mounted on both.)
The following additional errors can occur for linkat():
EBADF oldpath (newpath) is relative but olddirfd (newdirfd) is neither AT_FDCWD nor a valid file descriptor.
EINVAL An invalid flag value was specified in flags.
ENOENT AT_EMPTY_PATH was specified in flags, but the caller did not have the CAP_DAC_READ_SEARCH capability.
ENOENT An attempt was made to link to the /proc/self/fd/NN file corresponding to a file descriptor created with
open(path, O_TMPFILE | O_EXCL, mode);
See open(2).
ENOENT An attempt was made to link to a /proc/self/fd/NN file corresponding to a file that has been deleted.
ENOENT oldpath is a relative pathname and olddirfd refers to a directory that has been deleted, or newpath is a relative pathname and newdirfd refers to a direc‐
tory that has been deleted.
ENOTDIR
oldpath is relative and olddirfd is a file descriptor referring to a file other than a directory; or similar for newpath and newdirfd
EPERM AT_EMPTY_PATH was specified in flags, oldpath is an empty string, and olddirfd refers to a directory.
VERSIONS
linkat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4.
CONFORMING TO
link(): SVr4, 4.3BSD, POSIX.1-2001 (but see NOTES), POSIX.1-2008.
linkat(): POSIX.1-2008.
NOTES
Hard links, as created by link(), cannot span filesystems. Use symlink(2) if this is required.
POSIX.1-2001 says that link() should dereference oldpath if it is a symbolic link. However, since kernel 2.0, Linux does not do so: if oldpath is a symbolic
link, then newpath is created as a (hard) link to the same symbolic link file (i.e., newpath becomes a symbolic link to the same file that oldpath refers to).
Some other implementations behave in the same manner as Linux. POSIX.1-2008 changes the specification of link(), making it implementation-dependent whether or
not oldpath is dereferenced if it is a symbolic link. For precise control over the treatment of symbolic links when creating a link, use linkat().
Glibc notes
On older kernels where linkat() is unavailable, the glibc wrapper function falls back to the use of link(), unless the AT_SYMLINK_FOLLOW is specified. When old‐
path and newpath are relative pathnames, glibc constructs pathnames based on the symbolic links in /proc/self/fd that correspond to the olddirfd and newdirfd ar‐
guments.
BUGS
On NFS filesystems, the return code may be wrong in case the NFS server performs the link creation and dies before it can say so. Use stat(2) to find out if the
link got created.
SEE ALSO
ln(1), open(2), rename(2), stat(2), symlink(2), unlink(2), path_resolution(7), symlink(7)
Linux 2021-08-27 LINK(2)