💾 Archived View for rawtext.club › ~hut › psylink-power.gmi captured on 2023-09-08 at 17:55:51. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-03-01)
-=-=-=-=-=-=-
I made an updated schematic (psylink6) that shows more clearly how the modules are connected. Also corrected an error with the feedback of the voltage follower, and changed values of some resistors/capacitors:
I also constructed the power supply module:
Image: Photo of power module #1
but for some reason it didn't work. All the parts seemed to have been connected the right way, I couldn't find a short circuit, but the output voltage was ~0.5V instead of ~5V, and the reference voltage was just 0. I blame a possibly broken opamp.
Well, I didn't like the design and length of the circuit board anyway, so it didn't hurt trashing the thing and building this beauty instead:
Image: Photo of power module #2
I'll use female-to-female jumper wires to connect V+ and GND to the arduino, and 3 more wires to bootstrap the power supply of the mesh network of the signal processing modules.
Notes:
I wonder if some 深圳人 will read this, shake their head, and view me as a primate struggling to make fire with sticks. That's what it felt like to construct this thing anyway. Nevertheless, I'm one step closer to the next prototype :)
View the entire blogchain "psylink"
Previous post in blogchain: New Name
Next post in blogchain: Wireless Prototype
Written on 2021-05-09 by hut