💾 Archived View for tilde.cafe › ~wwwgem › issues › 01-BTus.gmi captured on 2023-09-08 at 17:03:29. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

░█░█░█░█░█▀█░▀█▀░░░█░█░█▀█░█▀▀░░░█░█░█▀▄░█▀█░█▀█░█▀▀
░█▄█░█▀█░█▀█░░█░░░░█▄█░█▀█░▀▀█░░░█▄█░█▀▄░█░█░█░█░█░█
░▀░▀░▀░▀░▀░▀░░▀░░░░▀░▀░▀░▀░▀▀▀░░░▀░▀░▀░▀░▀▀▀░▀░▀░▀▀▀

WWW in French

What Was Wrong

Other issues (past and current)

================================================================

20 April 2021

How to use bluetooth?

In a terminal, type bluetoothctl then power on. Do you get a message like "no default controller available" ?

If no, the way to use the bluetooth is:

- execute bluetoothctl

- then type power on

- scan on

- pair MAC_OF_DEVICE

- if using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. To do so, type trust MAC_OF_DEVICE

- connect MAC_OF_DEVICE

If yes, here are some things you can try:

- make sure your system and all packages are up to date

- make sure your bluetooth firmware is installed

- make sure the bluetooth module is loaded (run rmmod btusb then modprobe btusb)

- check that there is no options preventing your bluetooth to be activated in your Bios

- check that your bluetooth is not blocked by rfkill

- in Archlinux, using the deprecated bluez-utils-compat in lieu of bluez-utils can help in some situations

- try adding the kernel parameter btusb.enable_autosuspend=n

📬 contact me: wwwgem@disroot.org