💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc4745.txt captured on 2023-09-08 at 18:59:08.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group H. Schulzrinne
Request for Comments: 4745 Columbia U.
Category: Standards Track H. Tschofenig
Siemens Networks GmbH & Co KG
J. Morris
CDT
J. Cuellar
Siemens
J. Polk
J. Rosenberg
Cisco
February 2007
Common Policy: A Document Format for Expressing Privacy Preferences
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The IETF Trust (2007).
Abstract
This document defines a framework for authorization policies
controlling access to application-specific data. This framework
combines common location- and presence-specific authorization
aspects. An XML schema specifies the language in which common policy
rules are represented. The common policy framework can be extended
to other application domains.
Schulzrinne, et al. Standards Track [Page 1]
RFC 4745 Common Policy February 2007
Table of Contents
1. Introduction ....................................................3
2. Terminology .....................................................4
3. Modes of Operation ..............................................4
3.1. Passive Request-Response - PS as Server (Responder) ........5
3.2. Active Request-Response - PS as Client (Initiator) .........5
3.3. Event Notification .........................................5
4. Goals and Assumptions ...........................................6
5. Non-Goals .......................................................7
6. Basic Data Model and Processing .................................8
6.1. Identification of Rules ....................................9
6.2. Extensions .................................................9
7. Conditions .....................................................10
7.1. Identity Condition ........................................10
7.1.1. Overview ...........................................10
7.1.2. Matching One Entity ................................11
7.1.3. Matching Multiple Entities .........................11
7.2. Single Entity .............................................14
7.3. Sphere ....................................................15
7.4. Validity ..................................................16
8. Actions ........................................................17
9. Transformations ................................................18
10. Procedure for Combining Permissions ...........................18
10.1. Introduction .............................................18
10.2. Combining Rules (CRs) ....................................18
10.3. Example ..................................................19
11. Meta Policies .................................................21
12. Example .......................................................21
13. XML Schema Definition .........................................22
14. Security Considerations .......................................25
15. IANA Considerations ...........................................25
15.1. Common Policy Namespace Registration .....................25
15.2. Content-type Registration for
'application/auth-policy+xml' ............................26
15.3. Common Policy Schema Registration ........................27
16. References ....................................................27
16.1. Normative References .....................................27
16.2. Informative References ...................................28
Appendix A. Contributors ..........................................29
Appendix B. Acknowledgments .......................................29
Schulzrinne, et al. Standards Track [Page 2]
RFC 4745 Common Policy February 2007
1. Introduction
This document defines a framework for creating authorization policies
for access to application-specific data. This framework is the
result of combining the common aspects of single authorization
systems that more specifically control access to presence and
location information and that previously had been developed
separately. The benefit of combining these two authorization systems
is two-fold. First, it allows building a system that enhances the
value of presence with location information in a natural way and
reuses the same underlying authorization mechanism. Second, it
encourages a more generic authorization framework with mechanisms for
extensibility. The applicability of the framework specified in this
document is not limited to policies controlling access to presence
and location information data, but can be extended to other
application domains.
The general framework defined in this document is intended to be
accompanied and enhanced by application-specific policies specified
elsewhere. The common policy framework described here is enhanced by
domain-specific policy documents, including presence [7] and location
[8]. This relationship is shown in Figure 1.
+-----------------+
| |
| Common |
| Policy |
| |
+---+---------+---+
/|\ /|\
| |
+-------------------+ | | +-------------------+
| | | enhance | | |
| Location-specific | | | | Presence-specific |
| Policy |----+ +----| Policy |
| | | |
+-------------------+ +-------------------+
Figure 1: Common Policy Enhancements
This document starts with an introduction to the terminology in
Section 2, an illustration of basic modes of operation in Section 3,
a description of goals (see Section 4) and non-goals (see Section 5)
of the policy framework, followed by the data model in Section 6.
The structure of a rule, namely, conditions, actions, and
transformations, is described in Sections 7, 8, and 9. The procedure
for combining permissions is explained in Section 10 and used when
conditions for more than one rule are satisfied. A short description
Schulzrinne, et al. Standards Track [Page 3]
RFC 4745 Common Policy February 2007
of meta policies is given in Section 11. An example is provided in
Section 12. The XML schema will be discussed in Section 13. IANA
considerations in Section 15 follow security considerations in
Section 14.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT","RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [1].
This document introduces the following terms:
PT - Presentity / Target: The PT is the entity about whom
information has been requested.
RM - Rule Maker: The RM is an entity that creates the authorization
rules that restrict access to data items.
PS - (Authorization) Policy Server: This entity has access to both
the authorization policies and the data items. In location-
specific applications, the entity PS is labeled as location
server (LS).
WR - Watcher / Recipient: This entity requests access to data items
of the PT. An access operation might be a read, a write, or any
other operation.
A policy is given by a 'rule set' that contains an unordered list of
'rules'. A 'rule' has a 'conditions', an 'actions', and a
'transformations' part.
The term 'permission' indicates the action and transformation
components of a 'rule'.
The term 'using protocol' is defined in [9]. It refers to the
protocol used to request access to and to return privacy-sensitive
data items.
3. Modes of Operation
The abstract sequence of operations can roughly be described as
follows. The PS receives a query for data items for a particular PT,
via the using protocol. The using protocol (or more precisely, the
authentication protocol) provides the identity of the requestor,
either at the time of the query or at the subscription time. The
authenticated identity of the WR, together with other information
provided by the using protocol or generally available to the server,
Schulzrinne, et al. Standards Track [Page 4]
RFC 4745 Common Policy February 2007
is then used for searching through the rule set. All matching rules
are combined according to a permission combining algorithm described
in Section 10. The combined rules are applied to the application
data, resulting in the application of privacy based on the
transformation policies. The resulting application data is returned
to the WR.
Three different modes of operation can be distinguished:
3.1. Passive Request-Response - PS as Server (Responder)
In a passive request-response mode, the WR queries the PS for data
items about the PT. Examples of protocols following this mode of
operation include HTTP, FTP, LDAP, finger, and various remote
procedure call (RPC) protocols, including Sun RPC, Distributed
Computing Environment (DCE), Distributed Component Object Model
(DCOM), common object request broker architecture (Corba), and Simple
Object Access Protocol (SOAP). The PS uses the rule set to determine
whether the WR is authorized to access the PT's information, refusing
the request if necessary. Furthermore, the PS might filter
information by removing elements or by reducing the resolution of
elements.
3.2. Active Request-Response - PS as Client (Initiator)
Alternatively, the PS may contact the WR and convey data items.
Examples include HTTP, SIP session setup (INVITE request), H.323
session setup or SMTP.
3.3. Event Notification
Event notification adds a subscription phase to the "Active Request-
Response - PS as Client (Initiator)" mode of operation. A watcher or
subscriber asks to be added to the notification list for a particular
presentity or event. When the presentity changes state or the event
occurs, the PS sends a message to the WR containing the updated
state. (Presence is a special case of event notification; thus, we
often use the term interchangeably.)
In addition, the subscriber may itself add a filter to the
subscription, limiting the rate or content of the notifications. If
an event, after filtering by the rule-maker-provided rules and by the
subscriber-provided rules, only produces the same notification
content that was sent previously, no event notification is sent.
Schulzrinne, et al. Standards Track [Page 5]
RFC 4745 Common Policy February 2007
A single PS may authorize access to data items in more than one mode.
Rather than having different rule sets for different modes all three
modes are supported with a one rule set schema. Specific instances
of the rule set can omit elements that are only applicable to the
subscription model.
4. Goals and Assumptions
Below, we summarize our design goals and constraints.
Table representation:
Each rule must be representable as a row in a relational database.
This design goal should allow efficient policy implementation by
utilizing standard database optimization techniques.
Permit only:
Rules only provide permissions rather than denying them. Removing
a rule can never increase permissions. Depending on the
interpretation of 'deny' and 'permit' rules, the ordering of rules
might matter, making updating rule sets more complicated since
such update mechanisms would have to support insertion at specific
locations in the rule set. Additionally, it would make
distributed rule sets more complicated. Hence, only 'permit'
actions are allowed that result in more efficient rule processing.
This also implies that rule ordering is not important.
Consequently, to make a policy decision requires processing all
rules.
Additive permissions:
A query for access to data items is matched against the rules in
the rule database. If several rules match, then the overall
permissions granted to the WR are the union of those permissions.
A more detailed discussion is provided in Section 10.
Upgradeable:
It should be possible to add additional rules later, without
breaking PSs that have not been upgraded. Any such upgrades must
not degrade privacy constraints, but PSs not yet upgraded may
reveal less information than the rule maker would have chosen.
Schulzrinne, et al. Standards Track [Page 6]
RFC 4745 Common Policy February 2007
Capability support:
In addition to the previous goal, a RM should be able to determine
which extensions are supported by the PS. The mechanism used to
determine the capability of a PS is outside the scope of this
specification.
Protocol-independent:
The rule set supports constraints on both notifications or queries
as well as subscriptions for event-based systems such as presence
systems.
No false assurance:
It appears more dangerous to give the user the impression that the
system will prevent disclosure automatically, but fail to do so
with a significant probability of operator error or
misunderstanding, than to force the user to explicitly invoke
simpler rules. For example, rules based on weekday and time-of-
day ranges seem particularly subject to misinterpretation and
false assumptions on part of the RM. (For example, a non-
technical RM would probably assume that the rules are based on the
time zone of his current location, which may not be known to other
components of the system.)
5. Non-Goals
We explicitly decided that a number of possibly worthwhile
capabilities are beyond the scope of this first version. Future
versions may include these capabilities, using the extension
mechanism described in this document. Non-goals include:
No external references:
Attributes within specific rules cannot refer to external rule
sets, databases, directories, or other network elements. Any such
external reference would make simple database implementation
difficult and hence they are not supported in this version.
No regular expressions:
Conditions are matched on equality or 'greater-than'-style
comparisons, not regular expressions, partial matches such as the
SQL LIKE operator (e.g., LIKE "%foo%"), or glob-style matches
("*@example.com"). Most of these are better expressed as explicit
elements.
Schulzrinne, et al. Standards Track [Page 7]
RFC 4745 Common Policy February 2007
No repeat times:
Repeat times (e.g., every day from 9 am to 4 pm) are difficult to
make work correctly, due to the different time zones that PT, WR,
PS, and RM may occupy. It appears that suggestions for including
time intervals are often based on supporting work/non-work
distinctions, which unfortunately are difficult to capture by time
alone. Note that this feature must not be confused with the
'Validity' element that provides a mechanism to restrict the
lifetime of a rule.
6. Basic Data Model and Processing
A rule set (or synonymously, a policy) consists of zero or more
rules. The ordering of these rules is irrelevant. The rule set can
be stored at the PS and conveyed from RM to PS as a single document,
in subsets or as individual rules. A rule consists of three parts:
conditions (see Section 7), actions (see Section 8), and
transformations (see Section 9).
The conditions part is a set of expressions, each of which evaluates
to either TRUE or FALSE. When a WR asks for information about a PT,
the PS goes through each rule in the rule set. For each rule, it
evaluates the expressions in the conditions part. If all of the
expressions evaluate to TRUE, then the rule is applicable to this
request. Generally, each expression specifies a condition based on
some variable that is associated with the context of the request.
These variables can include the identity of the WR, the domain of the
WR, the time of day, or even external variables, such as the
temperature or the mood of the PT.
Assuming that the rule is applicable to the request, the actions and
transformations (commonly referred to as permissions) in the rule
specify how the PS is supposed to handle this request. If the
request is to view the location of the PT, or to view its presence,
the typical action is "permit", which allows the request to proceed.
Assuming the action allows the request to proceed, the
transformations part of the rule specifies how the information about
the PT -- their location information, their presence, etc. -- is
modified before being presented to the WR. These transformations are
in the form of positive permissions. That is, they always specify a
piece of information that is allowed to be seen by the WR. When a PS
processes a request, it takes the transformations specified across
all rules that match, and creates the union of them. For computing
this union, the data type, such as Integer, Boolean, Set, or the
Undef data type, plays a role. The details of the algorithm for
combining permissions is described in Section 10. The resulting
Schulzrinne, et al. Standards Track [Page 8]
RFC 4745 Common Policy February 2007
union effectively represents a "mask" -- it defines what information
is exposed to the WR. This mask is applied to the actual location or
presence data for the PT, and the data that is permitted by the mask
is shown to the WR. If the WR requests a subset of information only
(such as city-level civic location data only, instead of the full
civic location information), the information delivered to the WR MUST
be the intersection of the permissions granted to the WR and the data
requested by the WR.
Rules are encoded in XML. To this end, Section 13 contains an XML
schema defining the Common Policy Markup Language. This, however, is
purely an exchange format between RM and PS. The format does not
imply that the RM or the PS use this format internally, e.g., in
matching a query with the policy rules. The rules are designed so
that a PS can translate the rules into a relational database table,
with each rule represented by one row in the database. The database
representation is by no means mandatory; we will use it as a
convenient and widely-understood example of an internal
representation. The database model has the advantage that operations
on rows have tightly defined meanings. In addition, it appears
plausible that larger-scale implementations will employ a backend
database to store and query rules, as they can then benefit from
existing optimized indexing, access control, scaling, and integrity
constraint mechanisms. Smaller-scale implementations may well choose
different implementations, e.g., a simple traversal of the set of
rules.
6.1. Identification of Rules
Each rule is equipped with a parameter that identifies the rule.
This rule identifier is an opaque token chosen by the RM. A RM MUST
NOT use the same identifier for two rules that are available to the
PS at the same time for a given PT. If more than one RM modifies the
same rule set, then it needs to be ensured that a unique identifier
is chosen for each rule. A RM can accomplish this goal by retrieving
the already specified rule set and choosing a new identifier for a
rule that is different from the existing rule set.
6.2. Extensions
The policy framework defined in this document is meant to be
extensible towards specific application domains. Such an extension
is accomplished by defining conditions, actions, and transformations
that are specific to the desired application domain. Each extension
MUST define its own namespace.
Schulzrinne, et al. Standards Track [Page 9]
RFC 4745 Common Policy February 2007
Extensions cannot change the schema defined in this document, and
this schema is not expected to change except via revision to this
specification. Therefore, no versioning procedures for this schema
or namespace are provided.
7. Conditions
The access to data items needs to be matched with the rule set stored
at the PS. Each instance of a request has different attributes
(e.g., the identity of the requestor) that are used for
authorization. A rule in a rule set might have a number of
conditions that need to be met before executing the remaining parts
of a rule (i.e., actions and transformations). Details about rule
matching are described in Section 10. This document specifies only a
few conditions (i.e., identity, sphere, and validity). Further
condition elements can be added via extensions to this document. If
a child element of the <conditions> element is in a namespace that is
not known or not supported, then this child element evaluates to
FALSE.
As noted in Section 5, conditions are matched on equality or "greater
than" style comparisons, rather than regular expressions. Equality
is determined according to the rules for the data type associated
with the element in the schema given in Section 13, unless explicit
comparison steps are included in this document. For xs:anyURI types,
readers may wish to consult [2] for its discussion xs:anyURI, as well
as the text in Section 13.
7.1. Identity Condition
7.1.1. Overview
The identity condition restricts matching of a rule either to a
single entity or a group of entities. Only authenticated entities
can be matched; acceptable means of authentication are defined in
protocol-specific documents. If the <identity> element is absent,
identities are not considered, and thus, other conditions in the rule
apply to any user, authenticated or not.
The <identity> condition is considered TRUE if any of its child
elements (e.g., the <one/> and the <many/> elements defined in this
document) evaluate to TRUE, i.e., the results of the individual child
element are combined using a logical OR.
If a child element of the <identity> element is in a namespace that
is not known or not supported, then this child element evaluates to
FALSE.
Schulzrinne, et al. Standards Track [Page 10]
RFC 4745 Common Policy February 2007
7.1.2. Matching One Entity
The <one> element matches the authenticated identity (as contained in
the 'id' attribute) of exactly one entity or user. For
considerations regarding the 'id' attribute, refer to Section 7.2.
An example is shown below:
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r1">
<conditions>
<identity>
<one id="sip:alice@example.com"/>
<one id="tel:+1-212-555-1234" />
<one id="mailto:bob@example.net" />
</identity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
This example matches if the authenticated identity of the WR is
either sip:alice@example.com, tel:+1-212-555-1234, or
mailto:bob@example.net.
7.1.3. Matching Multiple Entities
The <many> element is a mechanism to perform authorization decisions
based on the domain part of the authenticated identity. As such, it
allows matching a large and possibly unknown number of users within a
domain.
Furthermore, it is possible to include one or multiple <except>
elements to exclude either individual users or users belonging to a
specific domain. Excluding individual entities is implemented using
a <except id="..."/> statement. The semantic of the 'id' attribute
of the <except> element has the same meaning as the 'id' attribute of
the <one> element (see Section 7.2). Excluding users belonging to a
specific domain is implemented using the <except domain="..."/>
element that excludes any user from the indicated domain.
If multiple <except> elements are listed as child elements of the
<many> element, then the result of each <except> element is combined
using a logical OR.
Schulzrinne, et al. Standards Track [Page 11]
RFC 4745 Common Policy February 2007
Common policy MUST either use UTF-8 or UTF-16 to store domain names
in the 'domain' attribute. For non-IDNs (Internationalized Domain
Names), lowercase ASCII SHOULD be used. For the comparison operation
between the value stored in the 'domain' attribute and the domain
value provided via the using protocol (referred to as "protocol
domain identifier"), the following rules are applicable:
1. Translate percent-encoding for either string.
2. Convert both domain strings using the ToASCII operation described
in RFC 3490 [3].
3. Compare the two domain strings for ASCII equality, for each
label. If the string comparison for each label indicates
equality, the comparison succeeds. Otherwise, the domains are
not equal.
If the conversion fails in step (2), the domains are not equal.
7.1.3.1. Matching Any Authenticated Identity
The <many/> element without any child elements or attributes matches
any authenticated user.
The following example shows such a rule that matches any
authenticated user:
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r5">
<conditions>
<identity>
<many/>
</identity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
Schulzrinne, et al. Standards Track [Page 12]
RFC 4745 Common Policy February 2007
7.1.3.2. Matching Any Authenticated Identity Except Enumerated
Domains/Identities
The <many> element enclosing one or more <except domain="..."/>
elements matches any user from any domain except those enumerated.
The <except id="..."/> element excludes particular users. The
semantics of the 'id' attribute of the <except> element is described
in Section 7.2. The results of the child elements of the <many>
element are combined using a logical OR.
An example is shown below:
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r1">
<conditions>
<sphere value="work"/>
<identity>
<many>
<except domain="example.com"/>
<except domain="example.org"/>
<except id="sip:alice@bad.example.net"/>
<except id="sip:bob@good.example.net"/>
<except id="tel:+1-212-555-1234" />
<except id="sip:alice@example.com"/>
</many>
</identity>
<validity>
<from>2003-12-24T17:00:00+01:00</from>
<until>2003-12-24T19:00:00+01:00</until>
</validity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
This example matches all users except any user in example.com, or any
user in example.org or the particular users alice@bad.example.net,
bob@good.example.net, and the user with the telephone number
'tel:+1-212-555-1234'. The last 'except' element is redundant since
alice@example.com is already excluded through the first line.
Schulzrinne, et al. Standards Track [Page 13]
RFC 4745 Common Policy February 2007
7.1.3.3. Matching Any Authenticated Identity within a Domain Except
Enumerated Identities
The <many> element with a 'domain' attribute and zero or more <except
id="..."/> elements matches any authenticated user from the indicated
domain except those explicitly enumerated. The semantics of the 'id'
attribute of the <except> element is described in Section 7.2.
It is nonsensical to have domains in the 'id' attribute that do not
match the value of the 'domain' attribute in the enclosing <many>
element.
An example is shown below:
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r1">
<conditions>
<identity>
<many domain="example.com">
<except id="sip:alice@example.com"/>
<except id="sip:bob@example.com"/>
</many>
</identity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
This example matches any user within example.com (such as
carol@example.com) except alice@example.com and bob@example.com.
7.2. Single Entity
The 'id' attribute used in the <one> and in the <except> element
refers to a single entity. In the subsequent text, we use the term
'single-user entity' as a placeholder for the <one> and the <except>
element. The <except> element fulfills the purpose of excluding
elements from the solution set.
A single-user entity matches the authenticated identity (as contained
in the 'id' attribute) of exactly one entity or user. If there is a
match, the single-user entity is considered TRUE. The single-user
entity MUST NOT contain a 'domain' attribute.
Schulzrinne, et al. Standards Track [Page 14]
RFC 4745 Common Policy February 2007
The 'id' attribute contains an identity that MUST first be expressed
as a URI. Applications using this framework must describe how the
identities they are using can be expressed as URIs.
7.3. Sphere
The <sphere> element belongs to the group of condition elements. It
can be used to indicate a state (e.g., 'work', 'home', 'meeting',
'travel') the PT is currently in. A sphere condition matches only if
the PT is currently in the state indicated. The state may be
conveyed by manual configuration or by some protocol. For example,
RPID [10] provides the ability to inform the PS of its current
sphere. The application domain needs to describe in more detail how
the sphere state is determined. Switching from one sphere to another
causes a switch between different modes of visibility. As a result,
different subsets of rules might be applicable.
The content of the 'value' attribute of the <sphere> element MAY
contain more than one token. The individual tokens MUST be separated
by a blank character. A logical OR is used for the matching the
tokens against the sphere settings of the PT. As an example, if the
content of the 'value' attribute in the sphere attribute contains two
tokens 'work' and 'home' then this part of the rule matches if the
sphere for a particular PT is either 'work' OR 'home'. To compare
the content of the 'value' attribute in the <sphere> element with the
stored state information about the PT's sphere setting a
case-insensitive string comparison MUST be used for each individual
token. There is neither a registry for these values nor a language-
specific indication of the sphere content. As such, the tokens are
treated as opaque strings.
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r2">
<conditions>
<sphere value="work"/>
<identity>
<one id="sip:andrew@example.com"/>
</identity>
</conditions>
<actions/>
<transformations/>
</rule>
Schulzrinne, et al. Standards Track [Page 15]
RFC 4745 Common Policy February 2007
<rule id="y6y55r2">
<conditions>
<sphere value="home"/>
<identity>
<one id="sip:allison@example.com"/>
</identity>
</conditions>
<actions/>
<transformations/>
</rule>
<rule id="z6y55r2">
<conditions>
<identity>
<one id="sip:john@doe.example.com"/>
</identity>
<sphere value="home work"/>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
The rule example above illustrates that the rule with the entity
andrew@example.com matches if the sphere is been set to 'work'. In
the second rule, the entity allison@example.com matches if the sphere
is set to 'home'. The third rule also matches since the value in the
sphere element also contains the token 'home'.
7.4. Validity
The <validity> element is the third condition element specified in
this document. It expresses the rule validity period by two
attributes, a starting and an ending time. The validity condition is
TRUE if the current time is greater than or equal to at least one
<from> child, but less than the <until> child after it. This
represents a logical OR operation across each <from> and <until>
pair. Times are expressed in XML dateTime format. A rule maker
might not always have access to the PS to invalidate some rules that
grant permissions. Hence, this mechanism allows invalidating granted
permissions automatically without further interaction between the
rule maker and the PS. The PS does not remove the rules; instead the
rule maker has to clean them up.
Schulzrinne, et al. Standards Track [Page 16]
RFC 4745 Common Policy February 2007
An example of a rule fragment is shown below:
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r3">
<conditions>
<validity>
<from>2003-08-15T10:20:00.000-05:00</from>
<until>2003-09-15T10:20:00.000-05:00</until>
</validity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
The <validity> element MUST have the <from> and <until> subelements
in pairs. Multiple <from> and <until> elements might appear in pairs
(i.e., without nesting of <from> and <until> elements). Using
multiple <validity> elements as subelements of the <conditions>
element is not useful since all subelements of the <conditions>
element are combined as a logical AND.
8. Actions
While conditions are the 'if'-part of rules, actions and
transformations form their 'then'-part. The actions and
transformations parts of a rule determine which operations the PS
MUST execute after having received from a WR a data access request
that matches all conditions of this rule. Actions and
transformations only permit certain operations; there is no 'deny'
functionality. Transformations exclusively specify PS-side
operations that lead to a modification of the data items requested by
the WR. Regarding location data items, for instance, a
transformation could force the PS to lower the precision of the
location information that is returned to the WR.
Actions, on the other hand, specify all remaining types of operations
the PS is obliged to execute, i.e., all operations that are not of
transformation type. Actions are defined by application-specific
usages of this framework. The reader is referred to the
corresponding extensions to see examples of such elements.
Schulzrinne, et al. Standards Track [Page 17]
RFC 4745 Common Policy February 2007
9. Transformations
Two sub-parts follow the conditions part of a rule: transformations
and actions. As defined in Section 8, transformations specify
operations that the PS MUST execute and that modify the result that
is returned to the WR. This functionality is particularly helpful in
reducing the granularity of information provided to the WR, as, for
example, required for location privacy. Transformations are defined
by application-specific usages of this framework.
A simple transformation example is provided in Section 10.
10. Procedure for Combining Permissions
10.1. Introduction
This section describes how rules are selected and how actions and
permissions are determined. When a PS receives a request for access
to privacy-sensitive data, the request is matched against the rule
set. A rule matches if all conditions contained as child elements in
the <conditions> element of a rule evaluate to TRUE. Each type of
condition defines when it is TRUE. All rules where the conditions
match the request form the matching rule set. The permissions in the
matching rule set are combined using a set of combining rules (CRs)
described in Section 10.2.
10.2. Combining Rules (CRs)
Each type of permission is combined across all matching rules. Each
type of action or transformation is combined separately and
independently. The combining rules generate a combined permission.
The combining rules depend only on the data type of permission. If a
particular permission type has no value in a rule, it assumes the
lowest possible value for that permission for the purpose of
computing the combined permission. That value is given by the data
type for booleans (FALSE) and sets (empty set), and MUST be defined
by any extension to the Common Policy for other data types.
For boolean permissions, the resulting permission is TRUE if and only
if at least one permission in the matching rule set has a value of
TRUE and FALSE otherwise. For integer, real-valued and date-time
permissions, the resulting permission is the maximum value across the
permission values in the matching set of rules. For sets, it is the
union of values across the permissions in the matching rule set.
Schulzrinne, et al. Standards Track [Page 18]
RFC 4745 Common Policy February 2007
10.3. Example
In the following example we illustrate the process of combining
permissions. We will consider three conditions for our purpose,
namely those of name identity (WR-ID), sphere, and validity
(from,until). The ID column is used as a rule identifier. For
editorial reasons we omit the domain part of the WR's identity.
We use two actions in our example, namely X and Y. The values of X
and Y are of data types Boolean and Integer, respectively.
The transformation, referred to as Z, uses values that can be set
either to '+' (or 3), 'o' (or 2) or '-' (or 1). Permission Z allows
us to show the granularity reduction whereby a value of '+' shows the
corresponding information unrestricted, and '-' shows nothing. This
permission might be related to location information or other presence
attributes like mood. Internally, we use the data type Integer for
computing the permission of this attribute.
The label 'NULL' in the table indicates that no value is available
for a particular cell.
Conditions Actions/Transformations
+---------------------------------+---------------------+
| Id WR-ID sphere from until | X Y Z |
+---------------------------------+---------------------+
| 1 bob home A1 A2 | TRUE 10 o |
| 2 alice work A1 A2 | FALSE 5 + |
| 3 bob work A1 A2 | TRUE 3 - |
| 4 tom work A1 A2 | TRUE 5 + |
| 5 bob work A1 A3 | NULL 12 o |
| 6 bob work B1 B2 | FALSE 10 - |
+---------------------------------+---------------------+
Again for editorial reasons, we use the following abbreviations for
the two <validity> attributes 'from' and 'until':
A1=2003-12-24T17:00:00+01:00
A2=2003-12-24T21:00:00+01:00
A3=2003-12-24T23:30:00+01:00
B1=2003-12-22T17:00:00+01:00
B2=2003-12-23T17:00:00+01:00
Note that B1 < B2 < A1 < A2 < A3.
The entity 'bob' acts as a WR and requests data items. The rule set
consists of the six rules shown in the table and identified by the
values 1 to 6 in the 'Id' column. The PS receives the query at
Schulzrinne, et al. Standards Track [Page 19]
RFC 4745 Common Policy February 2007
2003-12-24T17:15:00+01:00, which falls between A1 and A2. In our
example, we assume that the sphere value of the PT is currently set
to 'work'.
As a first step, it is necessary to determine which rules fire by
evaluating the conditions part of each of them.
Rule 1 does not match since the sphere condition does not match.
Rule 2 does not match as the identity of the WR (here 'alice') does
not equal 'bob'. Rule 3 matches since all conditions evaluate to
TRUE. Rule 4 does not match as the identity of the WR (here 'tom')
does not equal 'bob'. Rule 5 matches. Rule 6 does not match since
the rule is not valid anymore.
Only rules 3 and 5 fire. We use the actions and transformations part
of these two rules to determine the combined permission, as shown
below.
Actions/Transformations
+-----+-----------------------+
| Id | X Y Z |
+-----+-----------------------+
| 3 | TRUE 3 - |
| 5 | NULL 12 o |
+-----+-----------------------+
Each column is treated independently. The combined value of X is set
to TRUE since the NULL value equals FALSE according to the
description in Section 10.2. For the column with the name Y, we
apply the maximum of 3 and 12, so that the combined value of Y is 12.
For column Z, we again compute the maximum of 'o' and '-' (i.e., 2
and 1) which is 'o' (2).
The combined permission for all three columns is therefore:
Actions/Transformations
+-----------------------+
| X Y Z |
+-----------------------+
| TRUE 12 o |
+-----------------------+
Schulzrinne, et al. Standards Track [Page 20]
RFC 4745 Common Policy February 2007
11. Meta Policies
Meta policies authorize a rule maker to insert, update, or delete a
particular rule or an entire rule set. Some authorization policies
are required to prevent unauthorized modification of rule sets. Meta
policies are outside the scope of this document.
A simple implementation could restrict access to the rule set only to
the PT but more sophisticated mechanisms could be useful. As an
example of such policies, one could think of parents configuring the
policies for their children.
12. Example
This section gives an example of an XML document valid with respect
to the XML schema defined in Section 13. Semantically richer
examples can be found in documents that extend this schema with
application-domain-specific data (e.g., location or presence
information).
Below a rule is shown with a condition that matches for a given
authenticated identity (bob@example.com) and within a given time
period. Additionally, the rule matches only if the target has set
its sphere to 'work'.
<?xml version="1.0" encoding="UTF-8"?>
<ruleset xmlns="urn:ietf:params:xml:ns:common-policy">
<rule id="f3g44r1">
<conditions>
<identity>
<one id="sip:bob@example.com"/>
</identity>
<sphere value="work"/>
<validity>
<from>2003-12-24T17:00:00+01:00</from>
<until>2003-12-24T19:00:00+01:00</until>
</validity>
</conditions>
<actions/>
<transformations/>
</rule>
</ruleset>
Schulzrinne, et al. Standards Track [Page 21]
RFC 4745 Common Policy February 2007
13. XML Schema Definition
This section provides the XML schema definition for the common policy
markup language described in this document.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="urn:ietf:params:xml:ns:common-policy"
xmlns:cp="urn:ietf:params:xml:ns:common-policy"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified" attributeFormDefault="unqualified">
<!-- /ruleset -->
<xs:element name="ruleset">
<xs:complexType>
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:sequence>
<xs:element name="rule" type="cp:ruleType"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
</xs:element>
<!-- /ruleset/rule -->
<xs:complexType name="ruleType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:sequence>
<xs:element name="conditions"
type="cp:conditionsType" minOccurs="0"/>
<xs:element name="actions"
type="cp:extensibleType" minOccurs="0"/>
<xs:element name="transformations"
type="cp:extensibleType" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="id" type="xs:ID" use="required"/>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //rule/conditions -->
<xs:complexType name="conditionsType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:choice maxOccurs="unbounded">
<xs:element name="identity"
type="cp:identityType" minOccurs="0"/>
<xs:element name="sphere"
type="cp:sphereType" minOccurs="0"/>
Schulzrinne, et al. Standards Track [Page 22]
RFC 4745 Common Policy February 2007
<xs:element name="validity"
type="cp:validityType" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:choice>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //conditions/identity -->
<xs:complexType name="identityType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:choice minOccurs="1" maxOccurs="unbounded">
<xs:element name="one" type="cp:oneType"/>
<xs:element name="many" type="cp:manyType"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //identity/one -->
<xs:complexType name="oneType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:sequence>
<xs:any namespace="##other"
minOccurs="0" processContents="lax"/>
</xs:sequence>
<xs:attribute name="id"
type="xs:anyURI" use="required"/>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //identity/many -->
<xs:complexType name="manyType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="except" type="cp:exceptType"/>
<xs:any namespace="##other"
minOccurs="0" processContents="lax"/>
</xs:choice>
<xs:attribute name="domain"
use="optional" type="xs:string"/>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //many/except -->
Schulzrinne, et al. Standards Track [Page 23]
RFC 4745 Common Policy February 2007
<xs:complexType name="exceptType">
<xs:attribute name="domain" type="xs:string" use="optional"/>
<xs:attribute name="id" type="xs:anyURI" use="optional"/>
</xs:complexType>
<!-- //conditions/sphere -->
<xs:complexType name="sphereType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:attribute name="value"
type="xs:string" use="required"/>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //conditions/validity -->
<xs:complexType name="validityType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:sequence minOccurs="1" maxOccurs="unbounded">
<xs:element name="from" type="xs:dateTime"/>
<xs:element name="until" type="xs:dateTime"/>
</xs:sequence>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<!-- //rule/actions or //rule/transformations -->
<xs:complexType name="extensibleType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:sequence>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
</xs:schema>
Schulzrinne, et al. Standards Track [Page 24]
RFC 4745 Common Policy February 2007
14. Security Considerations
This document describes a framework for policies. This framework is
intended to be enhanced elsewhere by application-domain-specific
data. Security considerations are to a great extent application-data
dependent, and therefore need to be covered by documents that extend
the framework defined in this specification. However, new action and
transformation permissions along with their allowed values must be
defined in a way so that the usage of the permissions combining rules
of Section 10 does not lower the level of privacy protection. See
Section 10 for more details on this privacy issue.
15. IANA Considerations
This section registers a new XML namespace, a new XML schema, and a
new MIME type. This section registers a new XML namespace per the
procedures in [4].
15.1. Common Policy Namespace Registration
URI: urn:ietf:params:xml:ns:common-policy
Registrant Contact: IETF GEOPRIV working group, Henning Schulzrinne
(hgs+geopriv@cs.columbia.edu).
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
"http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type"
content="text/html;charset=iso-8859-1"/>
<title>Common Policy Namespace</title>
</head>
<body>
<h1>Namespace for Common Authorization Policies</h1>
<h2>urn:ietf:params:xml:ns:common-policy</h2>
<p>See <a href="ftp://ftp.rfc-editor.org/in-notes/rfc4745.txt">
RFC 4745</a>.</p>
</body>
</html>
END
Schulzrinne, et al. Standards Track [Page 25]
RFC 4745 Common Policy February 2007
15.2. Content-type Registration for 'application/auth-policy+xml'
This specification requests the registration of a new MIME type
according to the procedures of RFC 4288 [5] and guidelines in RFC
3023 [6].
MIME media type name: application
MIME subtype name: auth-policy+xml
Mandatory parameters: none
Optional parameters: charset
Indicates the character encoding of enclosed XML.
Encoding considerations:
Uses XML, which can employ 8-bit characters, depending on the
character encoding used. See RFC 3023 [6], Section 3.2.
Security considerations:
This content type is designed to carry authorization policies.
Appropriate precautions should be adopted to limit disclosure of
this information. Please refer to Section 14 of RFC 4745 and to
the security considerations described in Section 10 of RFC 3023
[6] for more information.
Interoperability considerations: None
Published specification: RFC 4745
Applications which use this media type:
Presence- and location-based systems
Additional information:
Magic Number: None
File Extension: .apxml
Macintosh file type code: 'TEXT'
Personal and email address for further information:
Hannes Tschofenig, Hannes.Tschofenig@siemens.com
Schulzrinne, et al. Standards Track [Page 26]
RFC 4745 Common Policy February 2007
Intended usage: LIMITED USE
Author:
This specification is a work item of the IETF GEOPRIV working
group, with mailing list address <geopriv@ietf.org>.
Change controller:
The IESG <iesg@ietf.org>
15.3. Common Policy Schema Registration
URI: urn:ietf:params:xml:schema:common-policy
Registrant Contact: IETF GEOPRIV working group, Henning Schulzrinne
(hgs+geopriv@cs.columbia.edu).
XML: The XML schema to be registered is contained in Section 13.
Its first line is
<?xml version="1.0" encoding="UTF-8"?>
and its last line is
</xs:schema>
16. References
16.1. Normative References
[1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[2] Duerst, M. and M. Suignard, "Internationalized Resource
Identifiers (IRIs)", RFC 3987, January 2005.
[3] Faltstrom, P., Hoffman, P., and A. Costello, "Internationalizing
Domain Names in Applications (IDNA)", RFC 3490, March 2003.
[4] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
January 2004.
[5] Freed, N. and J. Klensin, "Media Type Specifications and
Registration Procedures", BCP 13, RFC 4288, December 2005.
[6] Murata, M., St. Laurent, S., and D. Kohn, "XML Media Types",
RFC 3023, January 2001.
Schulzrinne, et al. Standards Track [Page 27]
RFC 4745 Common Policy February 2007
16.2. Informative References
[7] Rosenberg, J., "Presence Authorization Rules", Work in Progress,
June 2006.
[8] Schulzrinne, H., Tschofenig, H., Morris, J., Cuellar, J., and J.
Polk, "A Document Format for Expressing Privacy Preferences for
Location Information", Work in Progress, February 2006.
[9] Cuellar, J., Morris, J., Mulligan, D., Peterson, J., and J.
Polk, "Geopriv Requirements", RFC 3693, February 2004.
[10] Schulzrinne, H., Gurbani, V., Kyzivat, P., and J. Rosenberg,
"RPID: Rich Presence Extensions to the Presence Information Data
Format (PIDF)", RFC 4480, July 2006.
Schulzrinne, et al. Standards Track [Page 28]
RFC 4745 Common Policy February 2007
Appendix A. Contributors
We would like to thank Christian Guenther for his help with initial
versions of this document.
Appendix B. Acknowledgments
This document is partially based on the discussions within the IETF
GEOPRIV working group. Discussions at the Geopriv Interim Meeting
2003 in Washington, D.C., helped the working group to make progress
on the authorization policies based on the discussions among the
participants.
We particularly want to thank Allison Mankin <mankin@psg.com>,
Randall Gellens <rg+ietf@qualcomm.com>, Andrew Newton
<anewton@ecotroph.net>, Ted Hardie <hardie@qualcomm.com>, and Jon
Peterson <jon.peterson@neustar.biz> for discussing a number of
details with us. They helped us to improve the quality of this
document. Allison, Ted, and Andrew also helped us to make good
progress with the internationalization support of the identifier/
domain attributes.
Furthermore, we would like to thank the IETF SIMPLE working group for
their discussions of J. Rosenberg's draft on presence authorization
policies. We would also like to thank Stefan Berg, Murugaraj
Shanmugam, Christian Schmidt, Martin Thomson, Markus Isomaki, Aki
Niemi, Eva Maria Leppanen, Josip Matanovic, and Mark Baker for their
comments. Martin Thomson helped us with the XML schema. Mark Baker
provided a review of the media type. Scott Brim provided a review on
behalf of the General Area Review Team.
Schulzrinne, et al. Standards Track [Page 29]
RFC 4745 Common Policy February 2007
Authors' Addresses
Henning Schulzrinne
Columbia University
Department of Computer Science
450 Computer Science Building
New York, NY 10027
USA
Phone: +1 212 939 7042
EMail: schulzrinne@cs.columbia.edu
URI: http://www.cs.columbia.edu/~hgs
Hannes Tschofenig
Siemens Networks GmbH & Co KG
Otto-Hahn-Ring 6
Munich, Bavaria 81739
Germany
EMail: Hannes.Tschofenig@siemens.com
URI: http://www.tschofenig.com
John B. Morris, Jr.
Center for Democracy and Technology
1634 I Street NW, Suite 1100
Washington, DC 20006
USA
EMail: jmorris@cdt.org
URI: http://www.cdt.org
Jorge R. Cuellar
Siemens
Otto-Hahn-Ring 6
Munich, Bavaria 81739
Germany
EMail: Jorge.Cuellar@siemens.com
Schulzrinne, et al. Standards Track [Page 30]
RFC 4745 Common Policy February 2007
James Polk
Cisco
2200 East President George Bush Turnpike
Richardson, Texas 75082
USA
EMail: jmpolk@cisco.com
Jonathan Rosenberg
Cisco Systems
600 Lanidex Plaza
Parsippany, New York 07054
USA
EMail: jdrosen@cisco.com
URI: http://www.jdrosen.net
Schulzrinne, et al. Standards Track [Page 31]
RFC 4745 Common Policy February 2007
Full Copyright Statement
Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Schulzrinne, et al. Standards Track [Page 32]