💾 Archived View for mediocregopher.com › posts › building-gomobile-using-nix.gmi captured on 2023-07-22 at 16:39:46. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2023-03-20)

➡️ Next capture (2023-09-08)

-=-=-=-=-=-=-

This post has been translated from it's original markdown format, if it seems busted it might appear better over HTTP:

https://mediocregopher.com/posts/building-gomobile-using-nix

Building gomobile Using Nix

Harder than I thought it would be!

When I last left off with the nebula project I wanted to nix-ify the build process for Cryptic's mobile_nebula fork. While I've made progress on the overall build, one particular bit of it really held me up, so I'm writing about that part here. I'll finish the full build at a later time.

nix

mobile_nebula

gomobile

gomobile is a toolkit for the go programming language to allow for running go code on Android and iOS devices. `mobile_nebula` uses `gomobile` to build a simple wrapper around the nebula client that the mobile app can then hook into.

gomobile

This means that in order to nix-ify the entire `mobile_nebula` project I first need to nix-ify `gomobile`, and since there isn't (at time of writing) an existing package for `gomobile` in the nixpkgs repo, I had to roll my own.

I started with a simple `buildGoModule` nix expression:

pkgs.buildGoModule {
    pname = "gomobile";
    version = "unstable-2020-12-17";
    src = pkgs.fetchFromGitHub {
        owner = "golang";
        repo = "mobile";
        rev = "e6ae53a27f4fd7cfa2943f2ae47b96cba8eb01c9";
        sha256 = "03dzis3xkj0abcm4k95w2zd4l9ygn0rhkj56bzxbcpwa7idqhd62";
    };
    vendorSha256 = "1n1338vqkc1n8cy94501n7jn3qbr28q9d9zxnq2b4rxsqjfc9l94";
}

The basic idea here is that `buildGoModule` will acquire a specific revision of the `gomobile` source code from github, then attempt to build it. However, `gomobile` is a special beast in that it requires a number of C/C++ libraries in order to be built. I discovered this upon running this expression, when I received this error:

./work.h:12:10: fatal error: GLES3/gl3.h: No such file or directory
   12 | #include <GLES3/gl3.h> // install on Ubuntu with: sudo apt-get install libegl1-mesa-dev libgles2-mesa-dev libx11-dev

This stumped me for a bit, as I couldn't figure out a) the "right" place to source the `GLES3` header file from, and b) how to properly hook that into the `buildGoModule` expression. My initial attempts involved trying to include versions of the header file from my `androidsdk` nix package which I had already gotten (mostly) working, but the version which ships there appears to expect to be using clang. `cgo` (go's compiler which is used for C/C++ interop) only supports gcc, so that strategy failed.

I didn't like having to import the header file from `androidsdk` anyway, as it meant that my `gomobile` would only work within the context of the `mobile_nebula` project, rather than being a standalone utility.

nix-index

At this point I flailed around some more trying to figure out where to get this header file from. Eventually I stumbled on the nix-index project, which implements something similar to the `locate` utility on linux: you give it a file pattern, and it searches your active nix channels for any packages which provide a file matching that pattern.

nix-index

Since nix is amazing it's not actually necessary to install `nix-index`, I simply start up a shell with the package available using `nix-shell -p nix-index`. On first run I needed to populate the index by running the `nix-index` command, which took some time, but after that finding packages which provide the file I need is as easy as:

> nix-shell -p nix-index
[nix-shell:/tmp]$ nix-locate GLES3/gl3.h
(zulip.out)                                      82,674 r /nix/store/wbfw7w2ixdp317wip77d4ji834v1k1b9-libglvnd-1.3.2-dev/include/GLES3/gl3.h
libglvnd.dev                                     82,674 r /nix/store/pghxzmnmxdcarg5bj3js9csz0h85g08m-libglvnd-1.3.2-dev/include/GLES3/gl3.h
emscripten.out                                   82,666 r /nix/store/x3c4y2h5rn1jawybk48r6glzs1jl029s-emscripten-2.0.1/share/emscripten/system/include/GLES3/gl3.h

So my mystery file is provided by a few packages, but `libglvnd.dev` stood out to me as it's also the pacman package which provides the same file in my real operating system:

> yay -Qo /usr/include/GLES3/gl3.h
/usr/include/GLES3/gl3.h is owned by libglvnd 1.3.2-1

This gave me some confidence that this was the right track.

cgo

My next fight was with `cgo` itself. Go's build process provides a few different entry points for C/C++ compiler/linker flags, including both environment variables and command-line arguments. But I wasn't using `go build` directly, instead I was working through nix's `buildGoModule` wrapper. This added a huge layer of confusion as all of nixpkgs is pretty terribly documented, so you really have to just divine behavior from the source (good luck).

source

After lots of debugging (hint: `NIX_DEBUG=1`) I determined that all which is actually needed is to set the `CGO_CFLAGS` variable within the `buildGoModule` arguments. This would translate to the `CGO_CFLAGS` environment variable being set during all internal commands, and whatever `go build` commands get used would pick up my compiler flags from that.

My new nix expression looked like this:

pkgs.buildGoModule {
    pname = "gomobile";
    version = "unstable-2020-12-17";
    src = pkgs.fetchFromGitHub {
        owner = "golang";
        repo = "mobile";
        rev = "e6ae53a27f4fd7cfa2943f2ae47b96cba8eb01c9";
        sha256 = "03dzis3xkj0abcm4k95w2zd4l9ygn0rhkj56bzxbcpwa7idqhd62";
    };
    vendorSha256 = "1n1338vqkc1n8cy94501n7jn3qbr28q9d9zxnq2b4rxsqjfc9l94";

    CGO_CFLAGS = [
        "-I ${pkgs.libglvnd.dev}/include"
    ];
}

Running this produced a new error. Progress! The new error was:

/nix/store/p792j5f44l3f0xi7ai5jllwnxqwnka88-binutils-2.31.1/bin/ld: cannot find -lGLESv2
collect2: error: ld returned 1 exit status

So pretty similar to the previous issue, but this time the linker wasn't finding a library file rather than the compiler not finding a header file. Once again I used `nix-index`'s `nix-locate` command to find that this library file is provided by the `libglvnd` package (as opposed to `libglvnd.dev`, which provided the header file).

Adding `libglvnd` to the `CGO_CFLAGS` did not work, as it turns out that flags for the linker `cgo` uses get passed in via `CGO_LDFLAGS` (makes sense). After adding this new variable I got yet another error; this time `X11/Xlib.h` was not able to be found. I repeated the process of `nix-locate`/add to `CGO_*FLAGS` a few more times until all dependencies were accounted for. The new nix expression looked like this:

pkgs.buildGoModule {
    pname = "gomobile";
    version = "unstable-2020-12-17";
    src = pkgs.fetchFromGitHub {
        owner = "golang";
        repo = "mobile";
        rev = "e6ae53a27f4fd7cfa2943f2ae47b96cba8eb01c9";
        sha256 = "03dzis3xkj0abcm4k95w2zd4l9ygn0rhkj56bzxbcpwa7idqhd62";
    };
    vendorSha256 = "1n1338vqkc1n8cy94501n7jn3qbr28q9d9zxnq2b4rxsqjfc9l94";

    CGO_CFLAGS = [
        "-I ${pkgs.libglvnd.dev}/include"
        "-I ${pkgs.xlibs.libX11.dev}/include"
        "-I ${pkgs.xlibs.xorgproto}/include"
        "-I ${pkgs.openal}/include"
    ];

    CGO_LDFLAGS = [
        "-L ${pkgs.libglvnd}/lib"
        "-L ${pkgs.xlibs.libX11}/lib"
        "-L ${pkgs.openal}/lib"
    ];
}

Tests

The `CGO_*FLAGS` variables took care of all compiler/linker errors, but there was one issue left: `buildGoModule` apparently runs the project's tests after the build phase. `gomobile`'s tests were actually mostly passing, but some failed due to trying to copy files around, which nix was having none of. After some more buildGoModule source divination I found that if I passed an empty `checkPhase` argument it would skip the check phase, and therefore skip running these tests.

buildGoModule source

Fin!

The final nix expression looks like so:

pkgs.buildGoModule {
    pname = "gomobile";
    version = "unstable-2020-12-17";
    src = pkgs.fetchFromGitHub {
        owner = "golang";
        repo = "mobile";
        rev = "e6ae53a27f4fd7cfa2943f2ae47b96cba8eb01c9";
        sha256 = "03dzis3xkj0abcm4k95w2zd4l9ygn0rhkj56bzxbcpwa7idqhd62";
    };
    vendorSha256 = "1n1338vqkc1n8cy94501n7jn3qbr28q9d9zxnq2b4rxsqjfc9l94";

    CGO_CFLAGS = [
        "-I ${pkgs.libglvnd.dev}/include"
        "-I ${pkgs.xlibs.libX11.dev}/include"
        "-I ${pkgs.xlibs.xorgproto}/include"
        "-I ${pkgs.openal}/include"
    ];

    CGO_LDFLAGS = [
        "-L ${pkgs.libglvnd}/lib"
        "-L ${pkgs.xlibs.libX11}/lib"
        "-L ${pkgs.openal}/lib"
    ];

    checkPhase = "";
}

Once I complete the nix-ification of `mobile_nebula` I'll submit a PR to the nixpkgs upstream with this, so that others can have `gomobile` available as well!

================================================================================

Published 2021-02-13 by mediocregopher

This post is part of a series!

Next in the series: Evaluation of Network Filesystems

Prevous in the series: Building Mobile Nebula

Browse all posts

RSS feed

================================================================================

Home

Source

License for all content, if you must have one