💾 Archived View for spam.works › mirrors › textfiles › phreak › black3.txt captured on 2023-06-16 at 19:40:02.

View Raw

More Information

-=-=-=-=-=-=-

	
**********************************************************


                                                          *
    MEMBER NAME: BLACK                                    *
                                                          *

	
**********************************************************


 
 
                               BLACK BOX PLANS
 
  HERE IS HOW YOU CONSTRUCT A BLACK BOX.
 
    WHEN YOUR PHONE IS JUST SITTING THERE DOING NOTHING THE
  VOLTAGE THROUGH THE PHONE LINE IS ZERO. THEN IF SOMEONE CALLS
  YOU (FOR SOME STRANGE REASON) AND THE PHONE IS RINGING. THE
  VOLTAGE JUMPS TO 48 VOLTS WHICH TELLS MA BELL TO STAND BY IF YOU
  SHOULD PICK UP SO SHE CAN BILL YOU. WHEN YOU EVENTUALLY PICK UP
  THE PHONE, THE VOLTAGE DROPS TO 10 VOLTS AND THE BILLING STARTS.
  WHAT A BLACK BOX DOES IS KEEPS THE THE VOLTAGE AS 36 VOLTS,
  THEREFORE THE INCOMING CALLER NEVER GETS BILLED (INGEINIOUS)
 
    THE ORIGINAL BLACK BOX WAS CREATED BY AN EX-BELL EMPLOYEE WHO
  WENT BY THE NAME "CAPTAIN CRUNCH". HE GOT HIS NAME FROM THOSE
  LITTLE WHISLES YOU GOT IN BOXES OF CAPTAIN CRUNCH BECAUSE THEY
  EMITED A TONE THAT WAS EQUAL TO A COIN.CAPTAIN CRUNCH JUST
  ANNOUNCED  HIS RETIREMENT FROM PHREAKING WHEN HE WAS RELEASED
  FROM A CALIFORNIA JAIL. HE WAS CAUGHT WITH A BLUE BOX.
 
   CONSTRUCTION OF A
    BLACK BOX
 
    1] A 36 VOLT ZENER DIODE.
    2] A CERAMIC OR MYLAR CAPACITOR OF 0.1 MICROFARAD.
    3] A ELECTROLYTIC CAPACITOR OF 1.0 MICROFARAD.
 
   YOU CAN GET THESE AT YOUR LOCAL RADIO SHACK DEALER.
 
  FIRST YOU HAVE TO OPEN UP YOUR PHONE.YOU SHOULD NOTICE THREE
  WIRES COMING IN FROM THE BACK OF THE PHONE, A GREEN, RED, AND
  YELLOW. MOST OF THE TIME THEY CAN DIFFER.DON'T WORRY ABOUT THE
  YELLOW WIRE, WE WILL NOT BE USING THIS.YOU WILL NEED TO FIND THE
  MOST POSITIVE OF THE REMAINING TWO WIRES.(ALMOST ALWAYS THE
  GREEN WIRE). NOW CONNECT THE BANDED END OF THE ZENER DIODE TO
  THE MORE POSITIVE OF THESE TWO WIRES. "IN SERIES". YOU HAVE JUST
  COMPLETED THE FIRST STEP.  FOR THE SECOND STEP YOU NEED A
  CERAMIC OR MYLAR CAPACITOR OF 0.1 MICROFARAD. YOU CONNECT THIS
  "IN PARRALLEL" ACROSS THE DIODE. THIS IS NEEDED TO ALLOW THE
  DIODE TO PASS VOICE SIGNALS.  NOW FOR THE FINAL STEP TAKE YOUR
  ELECTROLYTIC CAPACITOR OF UP TO ONE MICROFARAD WITH ITS '+' END
  CONNECTED TO THE BANDED END OF THE DIODE AND THE OTHER END
  SHOULD BE CONNECTED TO THE ANODE END OF THE DIODE. MA BELL IS
  NOT TOTALLY OBLIVIOUS TO THIS.IF THE PHONE RINGS FOR ABOUT A
  HALF-HOUR THEY WILL THINK SOMETHING IS WRONG AND BILL YOU
  ANYWAY.  WHEN USING A BLACK BOX,YOUR PHONE WILL CONTINUE RING
  EVEN THOUGH YOU PICKED IT UP. YOU HAVE TO MAKE A SWITCH TO
  CONNECT ONE OF THE RINGER WIRES.THAT WILL SHUT IT OFF. THAT'S
  IT! HAVE PHUN!!!!!!!!!!!!!!!!
  <><><><><><><><><><><><><><><><><><><><><><><><><><<><>
 
 


Downloaded From P-80 International Information Systems 304-744-2253