💾 Archived View for spam.works › mirrors › textfiles › fun › handyman captured on 2023-06-14 at 16:37:17.
-=-=-=-=-=-=-
HANDYMAN
To prevent plywood from splitting while cutting, apply a strip of
masking tape at the point where you plan to start sawing.
Prevent moisture damage to shop lumber by placing lumber on a
couple of old tires.
To find the length of lumber you want from your storage pile,
mark foot lengths (1 ft., 2 ft., etc.) on wall or storage shelf.
Find wall studs by running an electric razor along the wall. The
razor tone will change at studs.
Store separated nails, screws, bolts, etc. in baby food jars.
Jar lids can be nailed to a board or under a shelf for hanging.
Use clamps when gluing objects for better holding power.
Clothes' pins will work for small objects.
If taking an item apart that has many small parts, lay parts on
double tape to avoid losing them.
When using a double edge razor blade, cover one edge with cork to
protect fingers.
Sharpen razor blades by using the striker on a matchbook.
Keep a record book of when home repairs are done, cost and by
whom. This is helpful if you sell your house, and in some cases,
for tax returns.
Remove old contact paper by heating the paper with your hair
dryer.
Label the inside of your fuse box, in case you need to replace a
fuse, or need to turn off the power to a certain room or
appliances.
Put a piece of masking tape or cellophane tape over drywall
plaster before nailing to avoid plaster from chipping.
When installing paneling, paint a one-inch strip the same color
as paneling between joints. If joints come apart, they won't be
as noticeable.
For nailing small nails, place the nails between the teeth of a
comb.
If the landlord tells you no nails in the wall, use a sewing
machine needle for hanging pictures. The needles will hold up to
30 pounds.
Quickly patch nail holes with toothpaste.
On colored walls after patching nail holes, color with water
color paints to blend in with wall color.
To avoid marring your walls when removing a nail, place a piece
of wood or magazine under hammer-head.
Place adhesive tape around the center of the picture wires to
keep pictures from sliding on hanger.
Wrap masking tape (sticky side out) around toothpicks, then place
near the bottom back side of frame. This is another way to keep
pictures in place.
Unfinished picture frames can be stained with shoe polish. Use
two coats, and after drying, wax with a good paste wax. Brown
shoe polish will have a walnut glow, oxblood emulates a mahogany,
and tan will appear as a light maple color.
Sandpaper will last longer and work better if the paper backing
is dampened slightly before wrapping around a block of wood.
For sanding small hard-to-get places, use sandpaper on a popsicle
stick or use an emery board.
When sanding small objects, attach the sandpaper to a flat
surface and then run the object that needs sanding over the
paper.
After sanding wood, pull an old nylon stocking over your hand and
rub the wood lightly. You will be able to locate the slightest
rough spots.
When drilling hard metal, on the drill point put a drop or two of
turpentine instead of oil for lubrication.
Use a small drill bit first for accuracy in drilling.
For plywood shelves, if you don't have a wood molding, use color
vinyl tape instead. This will give them a colorful look.
Put magnetic tape on inside of cupboard doors that won't stay
closed.
Non-stick vegetable spray can be used to lubricate squeaky
hinges, sticky locks, bicycle chains, etc.
On door hinges, lubricate the pin with petroleum jelly.
Petroleum jelly won't drip on the floor like oil.
To protect a saw blade, split a piece of garden hose and insert
the teeth into it.
Keep ladders from moving by driving spikes through the bottom of
small cans, into the ground. Then insert the ladder feet in the
cans.
Wrap burlap around the bottom rung of ladder to wipe your shoes
before climbing a ladder. This will remove any moisture or mud
from shoes.
Attach a rubber strip from an old tire to the top of a ladder to
insert tools. Nail the strip to make pockets. Tools can be
inserted before raising ladder.
Attach cup hooks to the top of your wooden ladder to hold rags.
Loosen old glue on wood joints by applying vinegar to joints.
Fill a small oil can with vinegar, and apply liberally to joints.
You can secure a loose chair leg by wrapping the loose end with a
small strip of nylon hose or thread, apply glue, then reinsert.
Sticky dresser drawers will slide easier if you rub candle wax or
soap on the runner on the side of the drawers.
Apply WD-40 on a rusty bolt for easier removal.
A rusty bolt often can be loosened by applying a cloth soaked in
any carbonated beverage.
A drop or two of ammonia also will loosen rusty bolts.
Before reinserting a bolt, to avoid future rusting, wrap thread
around the bolt and coat with vaseline.
To prevent rust on tools, place charcoal, chalk or several
mothballs in your toolbox to attract any moisture. The first two
are better choices unless you like the aroma of mothballs.
Check for gas leaks by lathering the pipes with soapy water. Any
gas escaping will cause soapy water to bubble.
If your cedar closet no longer smells like cedar, lightly sand
the surface. Sanding will restore the cedar smell.
On light switches that control lights that you can't see unless
the door is open to that room, dab some red paint or fingernail
polish on the on position.
Store leftover scraps of wallpaper by stapling them to your attic
wall. If you ever need to make a repair, the wallpaper should
have faded the same as the paper on the wall that needs the
repair.
Tips on Screws:
Remember that left is loose and right is tight.
Apply soap or wax on screws for easier screwing.
Fill an empty stick deodorant container, (the solid kind that you
roll up as you use) with toilet bowl wax. As you need more wax,
just turn the knob.
Longer screwdrivers have more leverage.
If a screw is loose, stick a wooden kitchen match or tooth pick
in the hole and break it off, then put the screw back in.
You can also wind a few strands of steel wool around the threads
of the screw before screwing it in to keep it tight.
For a wobbly drawer knob, paint the screw with fingernail polish
before inserting it.
Or dip screw in glue or putty and it will hold tight.
On home appliances, for screws that keep coming loose, dab
shellac under the heads before tightening them, this will hold
them tightly in place.
Painting Tips:
When painting a room, jot down how much paint it took for next
time. Write this information on the inside of the light switch.
The color used also can written down.
Protect shoes while painting by wearing an old pair of socks over
your shoes.
If your paint is lumpy, cut a circle from an old screen slightly
smaller than can. Place a screen in the can and let it settle to
the bottom. Lumps will be at the bottom of can.
Before pouring paint from a can, line the edge with masking tape.
When finished, remove tape and rim will be clean for replacing
lid.
Store left over latex paint in clean plastic milk jugs. Shake
jug before using the next time. Label color, brand, and store
obtained from.
A small amount of paint can be stored in small glass jars.
Save for touch ups.
If you're not able to finish your painting job, store brushes or
rollers that contain paint by wrapping with plastic wrap or
freezer wrap and freeze. Allow to thaw 1 hour before using.
Place roller pan in a large plastic bag before adding paint.
When your painting job is finished, throw the bag away and your
pan will be clean.
To paint stairways that must be used, paint every other step one
day and do the other steps the next day.
Paint small objects on a lazy Susan. You will be able to rotate
the object while painting.
Remove paint spatters from woodwork with very fine dry steel
wool.
Or better yet, before painting apply a coat of lemon oil on
woodwork. Paint speckles will wipe up easily.
For tiny touch-ups use a Q-tip instead of a paint brush.
Rid paint smell from a room by placing a large cut onion in a pan
of water in the middle of the room. The onion will absorb the
odor in a short time.
Or add a tablespoon of ammonia in a pan of water and leave
overnight to rid paint smell.