💾 Archived View for spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0310.tb captured on 2023-06-16 at 21:38:46.
-=-=-=-=-=-=-
AST RESEARCH, INC. TECHNICAL BULLETIN TB-0310 9-25-87
PREMIUM/286 WITH DESQVIEW 2.0
Quarterdeck's DESQview 2.0 manual states that the motherboard memory
of the personal computer should be set to the lowest possible
amount. Then memory from an EEMS-type board should be used to fill-
in the memory up to 640K.
Because the FASTRAM card's memory can all be accessed as EEMS
memory, AST recommends configuring the FASTRAM card as follows to
get optimum performance from DESQview 2.0:
Amount of Memory
Installed on the Configure the To Run DESQview
FASTRAM Card Memory As Use the Command
---------------- -------------- ---------------
512KB 512K Base "DV"
1024KB (and greater) 640 Base With the program
+128 Extended "QEXT.SYS"
----- installed in the
Total 768 Linear CONFIG.SYS
(Remainder will file use "XDV" to
by default be start DESQview
expanded).
based system.
FLOPPY BASE