💾 Archived View for spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0287.tb captured on 2023-06-16 at 21:38:27.
-=-=-=-=-=-=-
AST RESEARCH TECHNICAL BULLETIN TB-0287 07/28/87
AST-4000 LOW LEVEL FORMAT ROUTINE (CFMT)
Recently, AST has been interchanging the Fixed Disks installed in
the AST-4000 Disk Subsystems. Due to drive availability, some
systems will have the FUJITSU Model M2243AS while others may have
the MICROPOLIS Model 1325A.
A few of the AST-4000 Disk Subsystems have been shipped without
the FMT.DLS and the FMT.ATT files on the software distribution
diskette. These files are necessary for the user to perform a
"Low Level Format" (CFMT) on the fixed drive.
In order for the user to create the correct FMT.ATT and FMT.DLS
files, the unit must be opened to determine the type of drive
installed. The Defect List should be attached to the top of the
fixed disk.
Creating the FMT.ATT File: (Reference Page C-3 User's Manual)
FUJITSU MICROPOLIS
MODEL MODEL
2243AS 1325A
Number of Cylinders 754 1024
Number of Heads 11 8
Write Pre-Comp 383 1025
Landing Zone 0 0
Step Pulse 2 2
Interleave 2 2
Note: The interleave factor of 1 to 1 can be changed for optimum
operation on the PC AT by issuing the CFMT 1 command. (Reference
Addendum to Appendix C, AST-4000 USER'S MANUAL, Addendum
000195-008 A.)
Using an interleave factor of 1 to 1 will reduce the total disk
volume size by approximately four percent.