💾 Archived View for spam.works › mirrors › textfiles › apple › ANATOMY › dissassembly.er.txt captured on 2023-06-16 at 21:11:20.
View Raw
More Information
-=-=-=-=-=-=-
- *****************************************************************
- *
- DISASSEMBLY OF ERRORS *
- *
- ----------------------------------------------------------------*
- *
- Assembly language programmers should appreciate the fact *
- that debugging and error trapping a program often requires *
- considerable more time than simply coding the routines needed *
- to perform the tasks originally intended. Anyone who plans to *
- modify DOS or access DOS from an assembly language program *
- should therefore be thoroughly familiar with DOS's error- *
- handling routines. Unfortunately, this is not an easy task *
- because: *
- 1) Hundreds of lines of code and dozens of decisions and *
- flags may be required to process a simple error from *
- the point of detection to the actual printing of the *
- error message. *
- 2) The evolution of DOS has not always been a smooth *
- process. Some error-handling routines have been *
- patched more times than a miser's favorite pair of *
- socks. *
- 3) Some error-handling routines reset the stack pointer *
- to govern the execution pattern. The values used to *
- adjust the stack pointer are not always readily *
- apparent. *
- 4) Some command handlers call other command handlers. *
- 5) Some command handlers use both function and subfunction*
- handlers whereas other commands use neither. *
- 6) DOS employs approximately 14 different levels of sub- *
- routines. It is therefore often very difficult simply *
- to keep the implications of a given command in *
- perspective. *
- Considering these difficulties, it doesn't seem feasible *
- to describe all the different potential execution patterns *
- associated with DOS's error-handling routines in a single *
- formatted disassembly. However, the following listing should, *
- WHEN USED WITH THE OTHER FORMATTED DISASSEMBLIES, help you *
- trace any DOS error to its bitter end. In order to help you *
- keep things in perspective, note that this listing uses PHONY *
- command, function and subfunction handlers to depict a *
- MYTHICAL command that is vulnerable to every type of error in *
- DOS. Also note that a given subroutine may be accessed at *
- different depths of execution by different commands. (For *
- instance, PhonycommandhandlerA may access the BADFMXIT routine *
- ($B385) at a level five subroutines deeper than the command *
- handler's entry point. On the other hand, PhonycommandhandlerB *
- may enter BADFMXIT at a level seven subroutines deeper than *
- the command handler's entry point.) *
- *
- ================================================================*
- *
- DOS ACCESS VS ERROR HANDLING *
- *
- ----------------------------------------------------------------*
- *
- Assembly language programmers who access DOS via the *
- file manager should note that they must write their own error- *
- handling routines. Where necessary, these routines should *
- close files, release DOS buffers and print the appropriate *
- error messages. *
- Whenever possible, (nonturnkey) assembly language *
- programs intended for commerical distribution should be *
- designed to run on different-sized machines or accommodate *
- moved versions of DOS. Under these conditions, DOS must be *
- accessed via indirect addressing. Only the filemanager *
- (ie. DOS's function and subfunction handlers) and RWTS are *
- readily accessible through indirect addressing. All other *
- sections of DOS (including the command handlers, the error- *
- handling routines and DOS's command parsing and processing *
- routines) are off limits. It is therefore the programmer's *
- responsibility, to write his own supporting routines. These *
- routines must not only handle errors, but they must also *
- detect certain errors. (For example, none of the indirectly *
- accessible portions of DOS check a file description entry to *
- determine if the file found is of the correct type or not. *
- This is just another one of the duties of the program author.) *
- Some programmers implement DOS commands by direct calls *
- or by printing a string containing a return, control-D and the *
- characters of a DOS command. If you employ either of these *
- techniques, you should take special note of the ERRHNDLR *
- ($A6D2) and CKBSCRUN ($A65E) routines. Several flags in these *
- routines are responsible for determining the route taken to *
- exit DOS and whether or not an error message should be printed.*
- If you want DOS to exit to your own custom error-handling *
- routine, be sure to place the address of your error handler in *
- ADBSCERR ($9D5A, $9D5B) and condition the following flags as *
- indicated: *
- ACTBSFLG ($AAB6): $40 ;Denotes Applesoft. *
- CURLIN+1 ($76): not $FF ;$FF denotes immediate mode. *
- PROMPT ($33): not $DD ;$DD = RH bracket = Applesoft *
- ;prompt. *
- If you want DOS to print an error message before entering your *
- error handler, you must also insure that the on-err flag *
- (ERRFLG, $D8) contains a positive value. *
- *
- *****************************************************************
- **********************
- *
- Line parsing and *
- command recognition *
- routine. *
- *
- ---------------------*
(9FCD)
PARSECMD .
.
.
.
(A018) .
PRSYNERR JMP SYNTXERR ;A DOS command was expected but not found.
. ;- OR a filename was required but not issued.
. ;- OR an illegal filename character was used.
. ;- OR an option not applicable to the
. ; command was used.
. ;- OR IN#, PR# or MAXFILES arguments were
. ; not in the correct range.
.
(A02D) .
NODIRCMD LDA #15 ;An attempt was made to issue a READ, WRITE,
(A02F) JMP ERRHNDLR ;POSITION, OPEN or APPEND command in the
. ;immediate mode.
.
(A0C9) .
ARGRNGER LDA #2 ;Argument issued with the IN#, PR#
(A0CB) JMP ERRHNDLR ;or MAXFILES commands or A, B, R, L, S, D
. ;or V options was too large or too small.
.
(A0CE) .
TOSYNTX JMP SYNTXERR ;An option character was expected but not
. ;issued with the command.
. ;A non-numeric char was issued as an
. ;arugment for the IN#, PR#, or MAXFILES
. ;commands or for the A, B, R, L, S, D,
. ;or V options.
.
.
.
.
.
- Final processing of the DOS command.
(A17A)
TODOSCMD JSR DODOSCMD ;Go do the DOS command.
* Do the DOS command.
(A180)
DODOSCMD JSR RESTAT0 ;Zero out CONDNFLG and OPUTCOND.
* Reset CONDNFLG and OPUTCOND to zero.
(A75B)
RESTAT0 LDY #0
STY CONDNFLG
STY OPUTCOND
(A763) RTS
* Zero out the FM parameter list so we
* can customize it in accordance with the
* specific DOS command about to be executed.
(A183) JSR CLRFMPRM
* Clear out the FM parameter list.
(A1AE)
CLRFMPRM LDA #0
LDY #$16
ZFMPARM STA FMPRMLST-1,Y
DEY
BNE ZFMPARM
(A1B8) RTS
* Do a "stack jump" to process the command.
* (Note: THE COMMAND HANDLER IS ALWAYS
* ENTERED WITH CONDNFLG & OPUTCOND = 0.)
(A186) LDA NDX2CMD ;Get (a) = index to the command.
TAX ;(x) = index to the table of entry points.
LDA CMDTBL+1,X ;Get the address of the command handler
PHA ;and put it on the stack (hi byte first).
LDA CMDTBL,X
PHA
(A192) RTS ;Do a "stack jump" to the command handler.
********************************
* *
* Phony Command Handler *
* *
*------------------------------*
(----)
CmdPhony .
.
.
. ;Commands in which error can occur.
. ;(Only includes commands that are shown in
. ;their entirety in the formatted disassemblies.)
. ;------------------------------------------------
.
(A7D0) JMP TYPMISM ;CMDOPEN, CMDBSAVE, CMDSAVE, CMDAPPND / CMDPOSN,
. ;CMDWRITE, CMDREAD, CMDEXEC via CMDOPEN /
. ;CMDINIT via CMDSAVE / CMDBRUN via CMDBLOAD.
.
.
(----) JSR HNDLCMD
(A2A8)
HNDLCMD .
.
.
. ;Commands in which error can occur.
. ;(Only includes commands that are shown in
. ;their entirety in the formatted disassemblies.)
. ;------------------------------------------------
(A018) .
PRSYNERR JMP SYNTXERR ;Detected a BSAVE cmd with no accompanying
. ;A(ddress) or L(ength) parameters.
.
.
(A2CF) JMP NOBUFERR ;CMDVERIFY, CMDLOCK, CMDUNLOK, CMDCATLG,
. ;CMDRENAME, CMDELETE, CMDAPPND, CMDCHAIN,
. ;CMDBSAVE, CMDBLOAD, CMDLOAD, CMDSAVE /
. ;CMDBRUN via CMDBLOAD / CMDRUN via CMDLOAD /
. ;CMDWRITE, CMDREAD, CMDEXEC or CMDPOSN via
. ;CMDOPEN.
.
(A369) JMP TYPMISM ;CMDBLOAD or CMDBRUN via CMDBLOAD.
.
(A3A0) JMP TOOLARGE ;CMDSAVE and CMDINIT via CMDSAVE.
.
(A410) .
TOTYPMIS JMP TYPMISM ;CMDCHAIN, CMDLOAD or CMDRUN via CMDLOAD.
.
.
(A4AE) JMP TOOLARGE ;CMDCHAIN, CMDLOAD or CMDRUN via CMDLOAD.
.
(A5A5) .
NOLNGINT LDA #1 ;CMDINT.
(A5A7) JMP ERRHNDLR
.
(A63F) .
ENDATERR LDA #5 ;CMDEXEC, CMDREAD or CMDPOSN.
(A641) JMP ERRHNDLR
.
.
.
.
(A6A8) .
FMDRIVER JSR FILEMGR
(AB06)
FILEMGR TSX ;SAVE THE STACK POINTER so we can later
STX STKSAV ;return to the caller of the file manager.
JSR RSTRFMWA ;Copy work buf ---> FM work area.
LDA OPCODEFM ;Check if the opcode is legal.
CMP #13 ;(Must be less than 13.)
BCS TOERROP ;Range error - opcode too large.
ASL ;Double opcode val & put it in (x)
TAX ;so it indexes the table of function adrs.
LDA Phonyfunctbl+1,X ;Stick addr of function handler on
PHA ;the stack (hi byte first) and then do a
LDA Phonyfunctbl,X ; "stack jump" to the function
PHA ;handler's entry point.
(AB1E) RTS
.
.
----------------------
(AB1F)
TOERROP JMP RNGERROP ;Normally can only occur if the file manager
--------------------- ;is being used directly by custom assembly
;language programs.
.
.
(----) .
FunctionPhony LDA SUBCODFM ;Check if subcode is legal.
CMP #5 ;(Must be less than 5.)
BCS TOERRSUB ;Error - illegal subcode.
ASL ;Subcode * 2, cause 2 bytes per adr.
TAX ;Index tbl of subfunction adrs.
LDA Phonysubfunctbl,X ;Get addr (minus 1) of subfunction
PHA ;entry point and stick it on the stack
LDA Phonysubfunctbl,X ;(hi byte first).
PHA
(----) RTS ;Do a "stack jump" to the subfunction.
.
.
----------------------
(AC6A)
TOERRSUB JMP RNGERRSB ;Normally, can only occur if the file
--------------------- ;manager is being accessed by a custom
;assembly language program and only if
;the function being used requires a
;subfunction.
.
.
.
(----) .
SubfunctionPhony .
.
.
. ;Functions in which error can occur.
. ;(Only includes functions that are shown in
. ;their entirety in the formatted
. ;disassemblies.)
. ;---------------------------------------
.
(AB5E) JMP LNGNOTAV ;FNOPEN, FNVERIFY, FNDELETE, FNRENAME,
. ;FNLOCK and FNUNLOCK.
.
(AB61) .
TOFILNOT JMP FILENOT ;FNOPEN, FNVERIFY, FNDELETE, FNRENAME,
. ;FNLOCK and FNUNLOCK.
.
(AC6D) .
TOFILOCK JMP FILELOKD ;FNRENAME.
.
(ACB8) .
NDATERR JMP ENDOFDAT ;FNREAD.
.
.
(AD36) JMP FILELOKD ;FNDELETE.
.
(B2C0) .
TODSKFUL JMP DISKFULL ;FNOPEN.
.
.
(B241) JMP DISKFULL ;FNOPEN, FNVERIFY, FNDELETE, FNRENAME,
. ;FNLOCK and FNUNLOCK.
.
.
.
(----) JSR RWTSDRVR
(B052)
RWTSDRVR STX IBTRK
STY IBSECT
RWTSDRV1 STA IBCMD
(B058) .
.
.
- finish setting up RWTS's
input/output block (IOB).
.
.
.
(B08A) LDY ADRIOB ;Set (y) & (a) to
LDA ADRIOB+1 ;pt at RWTS's IOB.
(B090) JSR ENTERWTS ;Go call RWTS.
(B7B5)
ENTERWTS PHP
SEI
JSR RWTS
BCS ERRENTER
PLP
CLC
(B7BE) RTS
======
(B7BF)
ERRENTER PLP
SEC
(B7C1) RTS
======
(B093) .
.
.
.
(B09E) BCS ERRWTSDR ;Branch if UNsuccess.
(B0A0) RTS
============
* RWTS operation was NOT successful.
* (Translate RWTS error code (a) to
* an FM error code (y).)
(B0A1)
ERRWTSDR LDA IBSTAT
LDY #7
CMP #$20 ;Vol mismatch?
BEQ SETFMERR ;Yes.
LDY #$04
CMP #$10 ;Write protected?
BEQ SETFMERR ;Yes.
LDY #$08 ;Must have been other,
SETFMERR TYA ;so indicate I/O err.
(B0B3) JMP BADFMXIT ;Go handle error.
------------
(B35F)
LNGNOTAV LDA #1
BNE BADFMXIT ;ALWAYS.
RNGERROP LDA #2
BNE BADFMXIT ;ALWAYS.
RNGERRSB LDA #3
BNE BADFMXIT ;ALWAYS.
WRITPROT LDA #4
BNE BADFMXIT ;ALWAYS.
ENDOFDAT LDA #5
BNE BADFMXIT ;ALWAYS.
FILENOT LDA #6
BNE BADFMXIT ;ALWAYS.
DISKFULL JMP FULLPTCH
NOP
FILELOKD LDA #10
BNE BADFMXIT ;ALWAYS.
GOODFMXT LDA RTNCODFM
CLC ;(c) = 0 = signal good operation.
BCC FMEXIT ;ALWAYS.
BADFMXIT SEC ;(c) = 1 = signal unsuccessful operation.
FMEXIT PHP ;Save status on stack.
STA RTNCODFM ;Store return code in FM parameter list.
LDA #0 ;Avoid that infamous $48 bug.
STA STATUS
JSR CPYFMWA ;Copy work area --> work buffer.
(B391) PLP ;Retrieve status of success of operation
;back from the stack.
(B392) LDX STKSAV ;ADJUST THE STACK POINTER TO FORCE EXIT
TXS ;TO THE CALLER EVEN IF SEVERAL SUBROUTINES
(B396) RTS ;DEEPER THAN ORIGINAL ENTRY. (Always
============ ;returns to the AFTRFUNC routine ($A6AB)
;unless called by the RSETPTRS routine
;($B6B3) which is used to exit the
;append command handler. In this later
;instance, STKSAV ($B39B) is reset to
;exit the command before the FMEXIT
;($B386) routine is entered.)
* Disk-full-error patch.
(BFED)
FULLPTCH JSR CPYFMWA ;Copy work area --> work buffer.
LDX STKSAV ;Reinstate the stk pointer so that CLOSEALL
TXS ;($A316) sets STKSAV ($B39B) correctly.
JSR CLOSEALL ;Close all the files.
TSX ;Reset the stk pointer so we can return to
STX STKSAV ;the AFTRFUNC routine ($A6AB) in FMDRIVER.
LDA #9 ;Set (a) = disk-full error code.
(BFFD) JMP BADFMXIT ;Go exit the error.
------------
* Finish handling any function errors.
* (Execution returns here because the
* stack was reset with the value saved on
* entry to the FMDRIVER routine ($A6A8).)
* (If just read a byte from a data sector, enter
* with a clear carry (even if byte was a $00).)
(A6AB)
AFTRFUNC BCC FMDRVRTN ;Branch if no errors.
;If just did a read, branch if dealing
;with a byte from a data sector (as opposed
;to a byte from a T/S list).
(A6AD) LDA RTNCODFM ;Get error code from FM parameter list.
CMP #5 ;End-of-data error?
(A6B2) BEQ TOAPPTCH ;Yes - not handled like other errors!!!.
;File ends at a full data sec and so we
;encountered a zeroed out T/S link or a
;zeroed out data pair (trk/sec vals for
;next data sec listed in T/S list).
(A6B4) JMP OTHRERR ;Only take if got an error other than
------------ ;an end-of-data error.
TOAPPTCH JMP APNDPTCH
(A6B7) ------------
* Note: You are now entering an almost
* undecipherable mess of spaghetti programming.
* Parts of the following routines seem useless.
* Some instruction may just represent residual (but
* innocuous) bytes that are were left over from
* an earlier version of DOS.
* Check if file pointer and WASTEBYT are zeroes.
* (On entry, A4L/+1 is pointing at the FM work buffer.)
(B692)
APNDPTCH LDY #$13
CK4ZEROS LDA (A4L),Y
(B696) BNE SETAPFLG ;Unless we are dealing with a
;useless file that was previously
;opened, but never closed, this
;instruction is always taken.
(B698) INY
CPY #$17
(B69B) BNE CK4ZEROS
* The purpose of the following instructions is not
* understood. This section of code may have been
* designed to deal with useless files that were
* opened but never closed. Whatever, the original
* purpose was, the following code appears to keep
* the file pointer at #$000000 when a file with no
* data is encountered.
* (On entry, A4L/+1 is pointing at the FM work buffer.)
(B69D) LDY #$19
COPYRECS LDA (A4L),Y ;Copy image of RECNMNWA/+1 and BYTOFFWA/+1
STA RECNMBFM-$19,Y ;that were just stored in the work
INY ;buffer to RECNMBFM/+1 and BYTOFFFM/+1
CPY #$1D ;in the FM parm list.
BNE COPYRECS
FMDVRTN JMP BK2FMDRV
(B6A9) ------------
* Set the append flag.
* (Never entered if dealing
* with an empty file.)
(B6AC)
SETAPFLG LDX #$FF
STX APPNDFLG ;Set the append flag.
(B6B1) BNE FMDVRTN ;ALWAYS.
------------
(A6BA) NOP
BK2FMDRV JSR CKIFAPND
(A6BB)
* Check if using APPEND command.
(BA69)
CKIFAPND LDX CMDINDEX ;Get command index.
CPX #$1C ;Are we APPENDing?
BEQ RTNCKAPN ;Yes leave flag on.
LDX #0 ;No - turn off append flag.
STX APPNDFLG
RTNCKAPN RTS
(BA75)
(A6BE) LDX #0 ;Zero out the "one-data byte" parameter in FM parm list.
STX ONEIOBUF ;(Also referred to as low byte of CURIOBUF.)
FMDRVRTN RTS ;Return to caller of FMDRIVER.
(A6C3) ============
* Error was deadly so we better
* release the file's buffer and
* make sure the append flag is off.
(B65E)
OTHRERR JSR GETBUFF ;Locate buffer belonging to the file.
;(Put addr of buf in A3L/+1.)
(B661) BCS TOERRMSG ;No buffer was assigned so no need to
;release file's buf or turn off append
;flag.
(B663) LDA #0 ;Zero out the append flag and set
TAY ;(y) to index the first byte of the
STA APPNDFLG ;DOS name buf.
STA (A3L),Y ;Release the file's DOS buffer.
TOERRMSG LDA RTNCODFM ;Get error code so can index err msg.
(B66E) JMP ERRHNDLR ;Exit and do error message.
------------
(A6C4)
SYNTXERR LDA #11
BNE ERRHNDLR ;ALWAYS.
NOBUFERR LDA #12
BNE ERRHNDLR ;ALWAYS.
TOOLARGE LDA #14
BNE ERRHNDLR ;ALWAYS.
TYPMISM LDA #13
(A6D0)
(A6D2)
ERRHNDLR STA ASAVED ;Save error code for later use.
(A6D5) JSR RESTATIN
* Patch to set condition 0 and
* clear the run interrupt flag.
(BFE6)
RESTATIN JSR RESTAT0
* Reset CONDNFLG & OPUTCOND to zero.
(A75B)
RESTAT0 LDY #0
STY CONDNFLG
STY OPUTCOND
(A763) RTS
(BFE9) STY RUNTRUPT ;Clear the run interrupt flag.
(BFEC) RTS
(A6D8) LDA ACTBSFLG ;Check if Integer or FP basic is active.
(A6DB) BEQ WASINT ;Branch if using Integer.
;(On-error flag not applicable to integer.)
(A6DD) LDA ERRFLG ;Check if basic's ONERR flag is on.
(A6DF) BMI ONERRACT ;Yes - skip printing of error message
;cause we eventually want to go to our
(A6E1) ;own custom BASIC error handling routine.
WASINT LDX #0 ;Initialize index to tbl of offsets to errs.
(A6E3) JSR PRDOSERR ;Go print: <rtn>, <bell>, <rtn>.
* Print the DOS error message.
(A702)
PRDOSERR LDA OFF2ERR,X ;Use the error code to get an offset to
;the error message.
(A705) TAX ;(x) = offset to table of err msg text.
MOREMSG STX TEMPBYT ;Save offset to text.
LDA ERRTXTBL,X ;Get an error-message character.
PHA ;Save it on the stack.
ORA #$80 ;Turn the hi bit on to satisfy monitor.
(A70F) JSR GODSPLY
* Character output handler.
(9FC5)
GODSPLY JMP (CSW) ;Pts 2 true hndlr.
------------
* Monitor ROM's output char handler.
(FDF0)
COUT1 .
.
(See dis'mbly in APPLE II REFERENCE MANUAL.)
.
.
(RTS)
(A712) LDX TEMPBYT ;Reset (x) = offset to tbl of err msg text.
INX ;Kick index up for next char of message.
PLA ;Get original char back in (a).
BPL MOREMSG ;Branch if more chars in message.
(A719) RTS ;(All but the last char in @ msg are pos.)
(A6E6) LDX ASAVED ;Get saved return code.
JSR PRDOSERR ;Go print the error message.
;(See dis'mbly above.)
(A6EC) JSR CRVIADOS ;Print a <cr> via DOS & monitor ROM.
* Print a carriage return.
(9FC8)
CRVIADOS LDA #$8D ;<cr>.
(9FCA) JMP GODSPLY ;Go print it.
------------
* Character output handler.
(9FC5)
GODSPLY JMP (CSW) ;Pts 2 true hndlr.
------------
* Monitor ROM's output char handler.
(FDF0)
COUT1 .
.
(See dis'mbly in APPLE II REFERENCE MANUAL.)
.
.
(RTS)
(A6EF)
ONERRACT JSR INITIOHK ;Reset the I/O hooks to point to DOS.
* Initialize the I/O hooks so that DOS intercepts
* all input & output. For instance, if a routine
* encounters a "COUT JMP (CSW)", then execution will
* actually flow to DOS's output routine (OPUTINCP,
* $9EBD). Similarly, any routine that refers to
* "RDKEY JMP (KSW)" will actually jump to DOS's
* input routine (INPTINCP, $9E81).
*
* The true (ie. normal) hooks are saved, ex:
* KSW: KEYIN --> KSWTRUE: KEYIN.
* CSW: COUT1 --> CSWTRUE: COUT1.
* The intercepts are then set as follows:
* ADINPTCP: INPTINCP --> KSW: INPTINCP.
* ADOPUTCP: OPUTINCP --> CSW: OPUTINCP.
* Check if the input hook needs to be reset.
(A851)
INITIOHK LDA KSW+1
CMP ADINPTCP+1
(A856) BEQ CKOUTHK ;Input hook already points to DOS's
;input handler, so go check output hook.
* Reset the input hook to point to DOS.
(A858) STA KSWTRUE+1 ;KSW: KEYIN --> KSWTRUE: KEYIN.
LDA KSW
STA KSWTRUE
LDA ADINPTCP ;ADINPTCP: INPTINCP --> KSW: INPTINCP.
STA KSW
LDA ADINPTCP+1
(A868) STA KSW+1
* Check if the output hook needs to be reset.
(A86A)
CKOUTHK LDA CSW+1
CMP ADOPUTCP+1
(A86F) BEQ SETHKRTN ;Output hook already points to DOS's
;output handler, so go exit.
* Reset the output hook to point to DOS.
(A871) STA CSWTRUE+1,X ;CSW: COUT1 --> CSWTRUE: COUT1.
LDA CSW
STA CSWTRUE
LDA ADOPUTCP ;ADOPUTCP: OPUTINCP --> CSW: OPUTINCP.
STA CSW
LDA ADOPUTCP+1
STA CSW+1
SETHKRTN RTS
(A883)
(A6F2) JSR CKBSCRUN ;Check if basic is running a program.
* Is a version of basic running?
(A65E)
CKBSCRUN PHA ;Save (a) on the stack.
LDA ACTBSFLG ;Which basic is up?
(A662) BEQ INTBASIC ;Branch if using integer.
* Using Applesoft - now if the line number
* is greater than 65288 ($FF in hi byte),
* then we are using the immediate mode.
(A664) LDX CURLIN+1 ;Check hi byte of line number.
INX ;If $FF --> $00, then # > 65288.
(A667) BEQ IMEDMODE ;Branch if using immediate mode.
* FP apprears to be running a program.
* But, maybe CURLIN+1 was zapped, so
* also check the prompt.
(A669) LDX PROMPT ;Are we using an RH bracket (ie. an
CMP #$DD ;Applesoft prompt)?
(A66D) BEQ IMEDMODE ;Yes - so must be in immediate mode.
(A66F)
RUNNING PLA ;Get saved (a) back from the stack.
CLC ;Signal program is running.
(A671) RTS
============
(A672)
INTBASIC LDA RUNMODE ;Check Integer basic's run mode flag.
(A674) BMI RUNNING ;If neg, Integer basic is in deferred.
(A676)
IMEDMODE PLA ;Get save (a) back from the stack.
SEC ;Signal that we're in the immediate mode.
(A678) RTS
============
(A6F5) LDX ASAVED ;Get the saved return code.
(A6F8) LDA #3 ;Set (a) = 3 in case we fall thru to go to
;basic's error handling routine. (The magic
;number of "3" allows BSCERHLR ($D865) to
;condition (c) = 1 and (z) = 1 to comply with
;the basic routine that is responsible for
;printing basic's error messages.)
(A6FA) BCS DOWRM ;Basic is not running.
TOBSCERR JMP (ADBSCERR) ;Jump to basic's error handling routine
(A6FC) ------------ ;(BSCERHLR, $D865). (ADBSCERR EQU $9D5A).
DOWRM JMP (TOWRMVEC) ;Jump to basic's warmstart routine
(A6FF) ------------ ;(RESTART, $D43C). (TOWRMVEC EQ $9D5E).
* Table of offsets used to index the error
* message text table ($AA3F - $AA4E).
* (Hackers often swap these bytes around so
* erroneous error messages will be used.)
(AA3F)
OFF2ERR HEX 00 ;Error code - 0
HEX 03 ; - 1
HEX 19 ; - 2
HEX 19 ; - 3
HEX 24 ; - 4
HEX 33 ; - 5
HEX 3E ; - 6
HEX 4C ; - 7
HEX 5B ; - 8
HEX 64 ; - 9
HEX 6D ; - 10
HEX 78 ; - 11
HEX 84 ; - 12
HEX 98 ; - 13
HEX AA ; - 14
(AA4E) HEX BB ; - 15
* Text table of DOS error messages ($A971 - $AA3E).
* These messages are frequently altered in commerical
* programs. (Note that only the last character of each
* text message is written in negative ASCII form. Also
* note that error codes 11 to 15 are NOT set when DOS
* is accessed via indirect calls to the file manager.)
(A971) ; Corresponding error code & address.
ERRTXTBL HEX 0D078D ; 0 ($A971 - $A973)
;<cr>, <bell>, <cr>.
DCI 'LANGUAGE NOT AVAILABLE' ;1 ($A974 - $A989)
DCI 'RANGE ERROR' ; 2 & 3 ($A98A - $A994)
;Bad FM opcode or subcode or else,
;got illegal arguments issued for IN#,
;PR#, MAXFILES cmds or for A, B, R, L,
;S, D, V, C, I or O options.
DCI 'WRITE PROTECTED' ; 4 ($A995 - $A9A3)
DCI 'END OF DATA' ; 5 ($A9A4 - $A9AE)
DCI 'FILE NOT FOUND' ; 6 ($A9AF - $A9BC)
DCI 'VOLUME MISMATCH' ; 7 ($A9BD - $A9CB)
DCI 'I/O ERROR' ; 8 ($A9CC - $A9D4)
DCI 'DISK FULL' ; 9 ($A9D5 - $A9DD)
DCI 'FILE LOCKED' ; 10 ($A9DE - $A9E8)
DCI 'SYNTAX ERROR' ; 11 ($A9E9 - $A9F4)
DCI 'NO BUFFERS AVAILABLE' ; 12 ($A9F5 - $AA08)
DCI 'FILE TYPE MISMATCH' ; 13 ($AA09 - $AA1A)
DCI 'PROGRAM TOO LARGE' ; 14 ($AA1B - $AA2B)
DCI 'NOT DIRECT COMMAND' ; 15 ($AA2C - $AA3D)
(AA3E) HEX 8D ;<CR> no code ($AA3E)