💾 Archived View for spam.works › mirrors › textfiles › apple › ANATOMY › cmdposn.txt captured on 2023-06-16 at 21:11:12.
View Raw
More Information
-=-=-=-=-=-=-
- *****************************************************************
- *
- POSITION Command Handler *
- *
- ----------------------------------------------------------------*
- *
- The position command is used to move the file pointer *
- AHEAD R number of FIELDS from its CURRENT position. The file *
- pointer is moved ahead by repeatedly reading one byte at a *
- time. Each time a carriage return is encountered, the *
- relative field position is adjusted. If a $00 byte is *
- encountered before the desired number of fields have been *
- read, an end-of-data error message is generated. If an R- *
- parameter of 0 is used, or if no R-parameter is given, the *
- position command is exited and the file pointer remains at its *
- current position. (Note that the position COMMAND handler *
- does not utilize, and is completely unrelated to, the position *
- FUNCTION handler.) *
- *
- *****************************************************************
- On entry - a valid filename has been parsed
- & placed in the primary file name
- buffer (PRIMFNBUF, $AA75).
- - if a relative field position value
- (R-parameter) was issued, it was also
- checked for validity (range: $0000-$FF7F)
- and placed in the parsed option values
- table (RECPRSD, $AA6E).
- - if the file is not already open, the
- POSITION command automatically opens
- the file and then positions the file
- pointer RELATIVE TO THE START OF THE FILE.
(A5DD)
CMDPOSN JSR GETBUFF
* Locate buffer with same name.
* If that fails, locate a free buffer.
(A764)
GETBUFF LDA #0 ;Default hi-byte of pointer to 0
STA A5L+1 ;(ie. assume no free buff available).
(A768) JSR GETFNBF1 ;Get pointer to 1rst filename buffer in chain.
(A792)
GETFNBF1 LDA ADOSFNB1 ;First link to chain of DOS buffers
LDX ADOSFNB1+1 ;(ie. pt 2 1rst name buf in chain).
(A798) BNE SETNXPTR ;ALWAYS.
(A7A4)
SETNXPTR STX A3L+1 ;Put addr of 1rst filename buffer in ptr
STA A3L ;(ie. highest name buffer in chain).
TXA ;Get hi-byte of addr in back in (a).
GETNXRTN RTS
(A7A9)
(A76B) JMP FNCHAR1 ;Get first byte from filename
------------ ;field in DOS name buffer.
(A76E)
GETFNLNK JSR GETNXBUF
* Get addr of next filename buffer in chain
* from chain pointers buffer offset 37 & 36
* bytes from 1rst char of present filename
* buffer.
(A79A)
GETNXBUF LDY #37 ;Point the pointer at the chain buffer &
LDA (A3L),Y ;get addr of the next filename buffer.
BEQ GETNXRTN ;If hi-byte is 0, then lnk zeroed out.
TAX ;Save hi-byte in (x).
DEY ;Pick up low-byte.
LDA (A3L),Y
SETNXPTR STX A3L+1 ;Stick addr of filename buffer in ptr.
STA A3L
TXA ;Get hi-byte back in (a).
GETNXRTN RTS
(A7A9)
(A771) BEQ NOFNMTCH ;Link zeroed out, end of chain.
FNCHAR1 JSR GETFNBY1 ;Get the 1rst char of filename from buf in chain.
(A773)
* Get first byte from DOS filename buf.
(A7AA)
GETFNBY1 LDY #0 ;Buffer is free if 1rst byte = $00.
LDA (A3L),Y ;If buf occuppied, the 1rst byte = 1rst
(A7AE) RTS ;char of filename which owns buffer.
(A776) BNE NXFNBUF ;Take branch if buffer wasn't free.
LDA A3L ;Buffer was free, there4, point the A5L/H pointer
STA A5L ;at the free buffer.
LDA A3L+1
STA A5L+1
(A780) BNE GETFNLNK ;ALWAYS.
(A782)
NXFNBUF LDY #29 ;Buffer not free there4 compare name
CMPFNCHR LDA (A3L),Y ;of owner with name of file in primary
CMP PRIMFNBF,Y ;name buffer. (Start with last char first.)
(A789) BNE GETFNLNK ;Char doesn't match, there4 look for another
;buffer that might have same name.
(A78B) DEY ;That char matched, how bout rest of name?
BPL CMPFNCHR ;30 chars in name (ie. 0 to 29).
CLC ;Clr carry to signal match.
(A78F) RTS
============
(A790)
NOFNMTCH SEC ;Link zeroed out.
(A791) RTS
============
(A5E0) BCC BUFS4PRM ;File already open, so skip open cmd.
(A5E2) JSR CMDOPEN ;Go open the file.
* If the file is not already open, the
* POSITION command automatically opens the
* file and points the file pointer at the
* start of the file. As a result, the
* R-parameter is later used to position the
* the file pointer RELATIVE TO THE START
* OF THE FILE.
(A2A3)
CMDOPEN LDA #0 ;0 = code for text file.
(A2A5) JMP OPNCKTYP ;Go open the file & chk its type.
------------
(A3D5)
OPNCKTYP STA FILTYPFM ;Put code for file type in the
(A3D8) PHA ;Fm parameter list & save it on stk.
;($00=Text, $01=Integer, $02=Applesoft,
;$04=Binary, $08=S-type, $10=Relocatable,
;$20=A-type and $40=B-type.)
(A3D9) JSR HNDLCMD ;Use FM cmd handler to open file.
* Common file manager command handler code.
(A2A8)
HNDLCMD LDA #1 ;1 = open opcode.
HNDLCMD1 STA TEMPBYT ;Store opcode in temporary location.
LDA LENPRSD ;Get L-parameter from parsed table.
BNE SAVLENFM ;Was a non-zero L-parm issued with cmd?
LDA LENPRSD+1
BNE SAVLENFM
LDA #1 ;Length was 0 so make it 1 instead.
STA LENPRSD
SAVLENFM LDA LENPRSD ;Put length in FM parm list.
STA RECLENFM ;(Note: Record length = 1 for sequential files
LDA LENPRSD+1 ;else parsed length for random access files.)
STA RECLENFM+1
CLSLOCBF JSR CMDCLOSE ;Close file if it's already open.
(A2C8)
(A2EA)
CMDCLOSE .
.
(See dis'mbly of CMDCLOSE given below.)
.
.
- Because the file is not already open, this
call to the close command is only used to
locate a free DOS buffer via its call to
GETBUFF.
- On exit, A5L/H is left pointing at the
highest numbered (lowest in memory) FREE
DOS buffer.
- If no free buffer is available, an error
message is generated.
.
.
(RTS)
(A2CB) LDA A5L+1 ;Hi byte of A5L/H pointer which points at the highest
;numbered (lowest in memory) free DOS name buffer (in chain).
(A2CD) BNE SAVFNPTR ;Branch if found a free buffer.
(A2CF) JMP NOBUFERR ;Go issue an "out of buffers" message.
------------ ;(See dis'mbly of errors.)
(A2D2)
SAVFNPTR STA A3L+1 ;Reset A3L/H to point at DOS buffer that we
LDA A5L ;will use for file name field buffer (chain).
STA A3L
(A2D8) JSR CPYPFN
* Assign a DOS buffer to the file
* that we want to open. The highest
* numbered (lowest in memory) free
* DOS buffer is used.
(A743)
CPYPFN LDY #29 ;30 bytes to copy (0 to 29).
CPYPRIM LDA PRIMFNBF,Y ;Copy the name of the file wanted from
STA (A3L),Y ;the primary filename buffer into the
DEY ;filename field buffer (in DOS chain).
BPL CPYRIM ;More chars to get.
(A74D) RTS
(A2DB) JSR BUFS2PRM
* Get addresses of the various DOS buffers from the
* chain buffer & put them in the FM parameter list.
(A74E)
BUFS2PRM LDY #30 ;Get addr of FM work buf, T/S list
ADRINPRM LDA (A3L),Y ;buf, data sector buf & next DOS
STA WRKBUFFM-30,Y ;filename buf from chain
INY ;pointer buffer & put them in FM parm list.
CPY #38 ;(P.S. Adr of next DOS file name buf is
BNE ADRINPRM ;not used by DOS.)
(A75A) RTS
(A2DE) JSR CPY2PARM
* Put volume, drive, & slot values plus the
* address of the primary filename buffer
* in the FM parameter list.
(A71A)
CPY2PARM LDA VOLPRSD ;From parsed table.
STA VOLFM
LDA DRVPRSD ;From parsed table.
STA DRVFM
LDA SLOTPRSD ;From parsed table.
STA SLOTFM
LDA ADRPFNBF ;Get the adr of the primary file
STA FNAMBUFM ;name buf from the constants tbl
LDA ADRPFNBF+1 ;and put it in the FM parm list.
STA FNAMBUFM+1
LDA A3L ;Save adr of current DOS file name
STA CURFNADR ;buf in table of DOS variables.
LDA A3L+1
STA CURFNADR+1
(A742) RTS
(A2E1) LDA TEMPBYT ;Get open opcode back from temporary buffer
STA OPCODEFM ;and put it in the FM parameter list.
(A2E7) JMP FMDRIVER ;Go to the FM driver to do the function.
------------
* Use the file manager driver
* to do the OPEN FUNCTION.
(A6A8)
FMDRIVER JSR FILEMGR ;Call the file manager to do the function.
* File manager proper.
(AB06)
FILEMGR TSX ;Save stk pointer so can later
(AB07) STX STKSAV ;return to caller of FM. (That is, set
;to return to AFTRFUNC ($A6AB).)
(AB0A) JSR RSTRFMWA
* Copy FM work buf (in DOS chain) to
* FM work area (not in DOS chain).
(AE6A)
RSTRFMWA JSR SELWKBUF
* Get adr of FM work
* buf from FM parm
* list & put it in
* the A4L/H pointer.
(AF08)
SELWKBUF LDX #0
(AF0A) BEQ PT2FMBUF
(AF12)
PT2FMBUF LDA WRKBUFFM,X
STA A4L
LDA WRKBUFFM+1,X
STA A4L+1
(AF1C) RTS
(AE6D) LDY #0 ;Zero out rtn code in
(AE6F) STY RTNCODFM ;FM parm list to
;assume no errors as
(AE72) ;default condition.
STORFMWK LDA (A4L),Y ;Copy FM work buf
STA FMWKAREA,Y ;to FM work area.
INY
CPY #45 ;45 bytes to copy
BNE STORFMWK ;(0 to 44).
CLC ;WHY?????
(AE7D) RTS
(AB0D) LDA OPCODEFM ;Check if opcode is legal.
CMP #13 ;(Must be less than 13.)
BCS TOERROP ;Opcode too large so got range error.
ASL ;Double val of opcode & put it in (x)
TAX ;so it indexes tables of adrs.
LDA FMFUNCTB+1,X ;Stick adr of appropriate function
PHA ;handler on stack (hi byte first).
LDA FMFUNCTB,X
PHA
(AB1E) RTS ;DO STACK JUMP TO FUNCTION ENTRY POINT.
.
.
(AB22) .
FNOPEN .
.
(See dis'mbly of OPEN function.)
.
.
- uses part of COMNOPEN routine.
- reads in VTOC to get link to 1rst directory.
- reads directory secs in & looks for file
description entry with matching filename.
- if matching name found, reads in the
1rst T/S list sector belonging to the file.
- if no match found, issues a file-not-found
message and exits, (because the position
command is not allowed to create a new file).
.
.
(RTS)
============
(AB1F)
TOERROP JMP RNGERROP ;Go handle range error.
------------ ;(See dis'mbly of errors.)
* Return here after doing the OPEN FUNCTION.
* (Cause after @ function is done, use stack
* to get back to the original caller.)
(A6AB)
AFTRFUNC BCC FMDRVRTN ;(c) = 0 = no errors.
LDA RTNCODFM ;Get error code from FM parameter list.
CMP #$5 ;End-of-data error?
(A6B2) BEQ TOAPPTCH ;Yes - got a zeroed-out T/S link or a
;zeroed-out data pair in T/S list.
;(Not applicable to the open function.)
(A6B4) JMP OTHRERR ;No - see dis'mbly of errors.
------------
(A6C3)
FMDRVRTN RTS
(A3DC) PLA ;Get file type wanted off of stack.
(A3DD) JMP CHKFTYPE ;Go check if type wanted equals type found.
------------
* Check if file type wanted = file type found.
* (If using open command to open a pre-exisiting file,
* may get a type mismatch. However, a mismatch error
* is not possible when opening a new file.)
(A7C4)
CHKFTYPE EOR FILTYPFM ;Type found (via open function).
(A7C7) BEQ CKTYPRTN ;Branch if type wanted = type found.
* File types didn't match.
* Check if correct type but locked.
(A7C9) AND #%01111111 ;Maybe matched-disregard lock bit.
(A7CB) BEQ CKTYPRTN ;Branch if matched.
* Type wanted < > type found!!!!!
* So go close file & then issue a
* type mismatch error message.
(A7CD) JSR CMDCLOSE ;Wrong kind of file so go close it.
(A2EA)
CMDCLOSE .
.
(See dis'mbly of CLOSE command.)
.
.
Because the file is already open, execution flows
thru the close cmd twice. The first time thru, the
matching DOS filename buffer is located and
then CLOSEONE is used to close the file via the
open FUNCTION. The 2nd time thru, a matching
filename buffer is not found because the DOS buffer
was released on the first pass. Therefore, A5L/H
is left pointing at the highest numbered (lowest
in memory) FREE DOS buffer when the close command
is exited via EVENTXIT and CLOSERTS.
.
.
(RTS)
(A7D0) JMP TYPMISM ;See dis'mbly of errors.
------------ ;(Eventually goes into DOS's warm start routine.)
CKTYPRTN RTS
(A7D3) ============
(A5E5) JMP POSNCHKR ;Bypass next instruction, cause just
------------ ;opened file & parameter list already
;contains addresses of the different
;DOS buffers.
(A5E8)
BUFS4PSN JSR BUFS2PRM
* Get addresses of the various DOS buffers from the
* chain buffer & put them in the FM parameter list.
(A74E)
BUFS2PRM LDY #30 ;Get addr of FM work buf, T/S list
ADRINPRM LDA (A3L),Y ;buf, data sector buf & next DOS
STA WRKBUFFM-30,Y ;filename buf from chain
INY ;pointer buffer & put them in FM parm list.
CPY #38 ;(P.S. Adr of next DOS file name buf is
BNE ADRINPRM ;not used by DOS.)
(A75A) RTS
- Check bit 4 of CUMLOPTN (which holds cummulative record of
- option words issued on command line) to see if a non-zero
- R-parameter was issued with the command. NOTE: When issued
- with the position command, the R-parameter refers to the
- RELATIVE FIELD position FORWARD from the CURRENT file pointer
- position. (Although the same memory location is used for the
- relative field position and the record number, don't confuse the
- two. The record number is associated with random access files.)
(A5EB)
POSNCHKR LDA CUMLOPTN ;Check to see if a non-zero R-parameter
AND #%00000100 ;was issued with the position command.
(A5F0) BEQ DONEPOSN ;R-parameter was zero so go exit
;(ie. don't move file pointer).
- A non-zero R-parameter was issued so go move the file pointer
- FORWARD by reading one byte at a time. When a <cr> is
- encountered, reduce the count of the relative field positions to
- move. When the count equals zero, we are done positioning.
(A5F2)
CKPSNDUN LDA RECPRSD ;Check count of field positions moved.
BNE POSNMORE
LDX RECPRSD+1
(A5FA) BEQ DONEPOSN ;R-parameter has been counted down to zero,
;so we have arrived (ie. done positioning).
(A5FC) DEC RECPRSD+1 ;Reduce count of R-parameter (ie # of fields
POSNMORE DEC RECPRSD ;moved forward) for next time around.
PSNFIELD JSR RDTXTBYT ;Go read a text file byte.
(A602)
* Read a text file byte.
(A68C)
RDTXTBYT LDA #3 ;Set FM parm list to READ ONE byte.
STA OPCODEFM
LDA #1
STA SUBCODFM
(A696) JSR FMDRIVER
* Use the file manager driver
* to do the READ FUNCTION.
(A6A8)
FMDRIVER JSR FILEMGR ;Call the file manager to do the function.
* File manager proper.
(AB06)
FILEMGR TSX ;Save stk pointer so can later
(AB07) STX STKSAV ;return to caller of FM. (That is,
;set it to rtn to AFTRFUNC ($A6AB).)
(AB0A) JSR RSTRFMWA
* Copy FM work buf (in DOS chain) to
* FM work area (not in DOS chain).
(AE6A)
RSTRFMWA JSR SELWKBUF
* Get adr of FM work
* buf from FM parm
* list & put it in
* the A4L/H pointer.
(AF08)
SELWKBUF LDX #0
(AF0A) BEQ PT2FMBUF
(AF12)
PT2FMBUF LDA WRKBUFFM,X
STA A4L
LDA WRKBUFFM+1,X
STA A4L+1
(AF1C) RTS
(AE6D) LDY #0 ;Zero out rtn code in
(AE6F) STY RTNCODFM ;FM parm list to
;assume no errors as
(AE72) ;default condition.
STORFMWK LDA (A4L),Y ;Copy FM work buf
STA FMWRKAREA,Y ;to FM work area.
INY
CPY #45 ;45 bytes to copy
BNE STORFMWK ;(0 to 44).
CLC ;WHY?????
(AE7D) RTS
(AB0D) LDA OPCODEFM ;Check if opcode is legal.
CMP #13 ;(Must be less than 13.)
BCS TOERROP ;Opcode too large so got range error.
ASL ;Double val of opcode & put it in (x)
TAX ;so it indexes tables of adrs.
LDA FMFUNCTB+1,X ;Stick adr of appropriate function
PHA ;handler on stack (hi byte first).
LDA FMFUNCTB,X
PHA
(AB1E) RTS ;DO STACK JUMP TO FUNCTION ENTRY POINT.
.
.
(AC58) .
FNREAD .
.
- uses read function and read-one-byte
subfunction (READONE, $AC8A) to read
in a text file byte.
.
.
(RTS)
============
(AB1F)
TOERROP JMP RNGERROP ;Go handle range error.
------------ (See dis'mbly of errors.)
* Return here after doing the READ FUNCTION.
* (Cause after @ function is done, use stack to get
* back to the original caller. Note: The carry is clear
* if a data byte was just read. At this point in time,
* it doesn't matter if the DATA byte was $00 or not.)
(A6AB)
AFTRFUNC BCC FMDRVRTN ;(c) = 0 = no errors.
LDA RTNCODFM ;Get error code from FM parameter list.
CMP #$5 ;End-of-data error?
(A6B2) BEQ TOAPPTCH ;Yes - file ends at a full data sec and so
;we encountered a zeroed-out T/S link or a
;zeroed-out data pair (trk/sec values listed
;in a T/S list).
(A6B4) JMP OTHRERR ;No - see dis'mbly of errors.
TOAPPTCH JMP APNDPTCH ;(See dis'mbly of errors.)
NOP
BK2FMDRV JSR CKIFAPND ; <----- APNDPTCH returns here.
(A6BB)
* Check status of append flag.
(BA69)
CKIFAPND LDX CMDINDEX ;Get command index.
CPX #$1C ;Are we APPENDing?
BEQ RTNCKAPN ;Yes.
LDX #0 ;No - turn append flag off.
STX APPNDFLG
RTNCKAPN RTS
(BA75)
(A6BE) LDX #0 ;Zero out 1-data-byte buf in FM parm list.
STX ONEIOBUF ;(Also referred to as low byte of CURIOBUF.)
FMDRVRTN RTS
(A6C3)
(A699) LDA ONEIOBUF ;Load (a) with byte just read.
(A69C) RTS
(A605) BEQ ENDATERR ;If byte just read = $00, then ran out of
;data. A zero byte can be obtained from
;from an incompletely filled data sector.
;Or, if the file ends on a sector boundary,
;a $00 can also be obtained from a zeroed-
;out T/S link or a zeroed-out data pair
;(trk/sec values) listed in a T/S list.
(A607) CMP #$8D ;Was byte a field delimiter (ie. a <cr>)?
BNE PSNFIELD ;No - go read next byte IN SAME FIELD.
(A60B) BEQ CKPSNDUN ;Yes - got end-of-field marker, so branch
;back to reduce the field count and see if
;we're done positioning yet.
DONEPOSN RTS ;Exit - either done positioning, else the
(A60D) ============ ;R-parameter was zero & therefore, no
;positioning was needed. Exit to caller of
;command. (Normally retuns to AFTRCMD
;($A17D) located in the command parsing and
;processing routines.)
- Ran out of data while reading.
(A63F)
ENDATERR LDA #5 ;Set index to error & go to $A6D2 to issue
(A641) JMP ERRHNDLR ;and "end-of-data" message. (See dis'mbly
------------ ;of errors.)