💾 Archived View for republic.circumlunar.space › users › johngodlee › posts › 2018-12-29-linux-usb.g… captured on 2023-06-14 at 14:52:34. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Putting a Linux distro on a USB, from a Mac

DATE: 2018-12-29

AUTHOR: John L. Godlee

Previously I used unetbootin[1] and macOS' built-in Disk-Utility.app to format USB drives to use for installing Linux distributions on other computers. However, most recently, I found that I couldn't get any of the installers to work, so I was looking for an alternative.

1: https://unetbootin.github.io

I found that I could accomplish the same thing on the command line. Here is the process I used.

First, download a .iso image for a chosen linux distribution, for example, this Linux Server i386 image[2] that I wanted to use as a minimal installation on a netbook.

2: http://releases.ubuntu.com/16.04/

Plug the USB stick into the mac, and open a terminal. Enter:

diskutil list

To find a list of media volumes connected to the system. This will include both the hard disk for the mac and any connected external drives such as the USB.

It's normally trivial to identify the USB stick from the list by its size. It will be named something like /dev/disk2 and may contain multiple partitions, like /dev/disk2s1. When you are sure that you've identified the USB stick you want to install the linux distro on, enter:

diskutil eraseDisk FAT32 UNTITLED MBRformat /dev/disk2

This will format the USB (deleting everything in the process), to a format that should be compatible with any device you plug it into. I think this might have been the stumbling block in my old system, and the USB wasn't formatted correctly.

Then, unmount the USB drive:

diskutil unmountDisk /dev/disk2s1

Finally, install the .iso image you downloaded earlier onto the USB:

sudo dd if=PATH_TO_ISO.iso of=/dev/rdisk2 bs=1m

Note that it's not a typo putting rdisk2 instead of disk2, it seems to make the process run faster, similarly adding bs=1m.

Then it's just a case of booting from the USB on the new machine and following the installation instructions.