💾 Archived View for spam.works › mirrors › textfiles › hamradio › eavesdropping.txt captured on 2023-06-14 at 17:00:45.
-=-=-=-=-=-=-
***************************************************************
* *
* Electronic Eavesdropper *
* *
* by *
* *
* Circle Lord *
* *
***************************************************************
Have you ever considered buying one of those hi powered microphones often
seen in eletronics magazines, but thought it was to much to buy and to small to
card? The circuit shown in this file will provide you with the information to
build one for a lot less money.
These audio eavesdropping devices are probably one of the hottest items in
the underground due to their ability to pick up voices through thick walls.
You can also attach the speaker wires to a tape recorder and save all the
conversation. As one can see these are great for blackmailing a teacher,
classmate, principal, neighbor, or whoever you seek services from...
Parts list:
-=EM--------------------------
M1 Amplifier Module. (Lafayette 99C9037 or equiv.)
M2 9-VDC battery.
M3 Microphone
R1 20K poteniometer with spst switch.
S1 Spst switch on R1
SP1 8-ohm speaker
T1 Audio transformer (Radio Crap part 273-1380)
Schematics
+------+--------M1
1 1 1
1 1red 1blu
1 1 1
1 transformer
1 1 1
1 1yel 1grn
+------+ 1
1 +-----+ +-----+
1 1 1 1
b1 b1 r+M2+b o+S1+o 1
l1 l1 e1 1l r1 1r 1
k1 u1 d1 1k g1 1g 1
********************** 1
* yel>*-+ ++
* * R 1
* M1 * 1-+ 1
* red>*-+ 1 1
* * 1<<
********************** 1
b1 1g y1 1
l1 1r e1 1
k1 1y l1 1
1 1 +----------+
+SP1+
S1 here is on the potentiometer
M3 can be an earphone earpiece
---- /
/ /
/ /
/ ircle / ord
---- ----
==Phrack Inc.==
Volume One, Issue Three, Phile 8 of 10
***************************************************************
* *
* Making a Shock Rod *
* *
* By *
* *
* Circle Lord *
* *
***************************************************************
This handy little circuit is the key to generating THOUSANDS of volts of
electricity for warding off attackers (notice the plural). It generates it
all from a hefty 6-volt source and is easily fit into a tubular casing.
Originally used as a fence charger, this circuit can be put to other uses such
as: charging a whole row of lockers at school, a row of theater seats, or a
metal bleacher set in the gym. More on this later.
To build this, all you need is a GE-3 transistor, a 6.3-volt transformer, and a
handful of spare parts from old radios. The ammount of shock you wish to
generate is determined by the setting of potentiometer R1, a 15,000 ohm
variable resistor. Hint: for maximum shock, set R1 at maximum!