💾 Archived View for spam.works › mirrors › textfiles › hacking › ncsc-tg-003.txt captured on 2023-06-14 at 16:54:25.
View Raw
More Information
-=-=-=-=-=-=-
NCSC-TG-003
VERSION-1
NATIONAL COMPUTER SECURITY CENTER
A GUIDE TO
UNDERSTANDING
DISCRETIONARY
ACCESS CONTROL
IN
TRUSTED SYSTEMS
30 September 1987
Approved for Public Release:
Distribution Unlimited.
NATIONAL COMPUTER SECURITY CENTER
FORT GEORGE G. MEADE, MARYLAND 20755-6000
NCSC-TG-003-87
Library No. S-228,576
FOREWORD
This publication, "A Guide to Understanding Discretionary Access Control In
Trusted Systems," is issued by the National Computer Security Center (NCSC)
under the authority of and in accordance with Department of Defense (DoD)
Directive 5215.1, "Computer Security Evaluation Center." The guidelines
defined in this document are intended to be used by computer hardware and
software designers who are building systems with the intent of meeting the
requirements of the Department of Defense Trusted Computer System Evaluation
Criteria, DoD 5200.28-STD.
Recommendations for revision to this publication are encouraged and will be
reviewed biannually by the NCSC through a formal review process. Address all
proposals for revision through appropriate channels to:
National Computer Security Center
9800 Savage Road
Fort George G. Meade, MD 20755-6000
Attention: Chief, Technical Guidelines Division
Patrick R. Gallagher, Jr. 30 September 1987
Director
National Computer Security Center
i
ACKNOWLEDGEMENTS
Special recognition and acknowledgement for their contributions to this
document are extended to the following:
Carole S. Jordan, National Computer Security Center (NCSC), as primary author
and preparer of this document. Dr. Deborah Downs, the Aerospace Corporation,
who prepared an in-depth technical report on DAC mechanisms that became the
major input to this document. Grant Wagner and Steve LaFountain, NCSC, who
contributed their technical expertise and assistance throughout this effort.
Dr. Dixie B. Baker, the Aerospace Corporation, who meticulously reviewed the
document and suggested many changes.
Special thanks are extended to the many computer vendor representatives who
enthusiastically gave of their time and technical expertise in reviewing the
material and providing valuable comments and suggested changes. Among the
vendor representatives who were so helpful were: Steven B. Lipner, Digital
Equipment Corp., Dr. Roger Schell, Gemini Computers, Earl Boebert, Honeywell,
Inc., and C.T. Bougas, Harris Corporation.
ii
Contents
Page
FOREWORD................................................................... i
ACKNOWLEDGEMENTS.......................................................... ii
1. INTRODUCTION.............................................................1.
2. PURPOSE................................................................ 1
3. SCOPE.................................................................. 1
4. CONTROL................................................................ 2
5. DEFINITIONS............................................................ 3
6. AN INHERENT DEFICIENCY IN DISCRETIONARY ACCESS CONTROL................. 5
6.1 A FUNDAMENTAL FLAW IN DISCRETIONARY ACCESS CONTROL................ 5
6.2 AN EXAMPLE OF A TROJAN HORSE...................................... 5
7. AN OVERVIEW OF DAC MECHANISMS.......................................... 7
7.1 CAPABILITIES....................................................... 7
7.2 PROFILES.......................................................... 8
7.3 ACCESS CONTROL LISTS (ACLs)....................................... 9
7.3.1 WILD CARDS............................................... 9
7.3.2 DEFAULT ACLs............................................. 10
7.3.3 NAMED ACLs.............................................. 10
7.4 PROTECTION BITS................................................... 11
7.5 PASSWORD DAC MECHANISMS.......................................... 11
7.6 SUMMARY........................................................... 12
8. THE SET OF DAC ACCESS TYPES............................................ 13
8.1 CONTROL PERMISSIONS............................................... 13
8.1.1 CONTROL MODELS.......................................... 13
8.1.1.1 HIERARCHICAL..................................... 13
8.1.1.2 CONCEPT OF OWNERSHIP............................ 14
8.1.1.3 LAISSEZ-FAIRE.................................... 15
8.1.1.4 CENTRALIZED..................................... 15
8.1.2 FILE STRUCTURES AND CONTROL PERMISSIONS.................. 15
8.2 ACCESS MODES.................................................... 16
8.2.1 FILE STRUCTURES AND ACCESS MODES......................... 17
9. MEETING THE CRITERIA REQUIREMENTS.......................................19
iii
Page
9.1 THE C1 DAC REQUIREMENT............................................ 19
9.1.1 MINIMUM FUNCTIONALITY................................... 19
9.1.2 FUNCTIONALITY NOT REQUIRED.............................. 20
9.1.3 AN ACCEPTABLE IMPLEMENTATION............................ 20
9.2 THE C2 THROUGH B2 DAC REQUIREMENT................................ 20
9.2.1 MINIMUM FUNCTIONALITY..................................... 21
9.2.2 FUNCTIONALITY NOT REQUIRED............................... 21
9.2.3 AN ACCEPTABLE IMPLEMENTATION.............................. 22
9.3 THE B3 THROUGH A1 DAC REQUIREMENT................................ 22
9.3.1 MINIMUM FUNCTIONALITY..................................... 23
9.3.2 AN ACCEPTABLE IMPLEMENTATION............................. 23
10. OTHER TOPICS......................................................... 25
10.1 PROTECTED SUBSYSTEMS............................................. 25
10.2 ADMINISTERING AND USING DAC...................................... 25
10.3 AUDITING DAC..................................................... 26
10.4 VERIFYING DAC................................................... 26
10.5 DAC ADD-ONS...................................................... 27
11. SUMMARY OF DESIRED DAC FEATURES........................................28
12. REFERENCES.......................................................... 29
iv
1. INTRODUCTION
The main goal of the National Computer Security Center is to encourage the
widespread availability of trusted computer systems. In support of that goal
a metric was created, the Department of Defense Trusted Computer System
Evaluation Criteria (the Criteria) Il], against which computer systems could
be evaluated for security.
2. PURPOSE
One of the features of the Criteria that is required of a secure system is the
enforcement of discretionary access control (DAC). DAC is a means of
restricting access to objects based on the identity of subjects and/or groups
to which they belong. The controls are discretionary in the sense that a user
or process given discretionary access to information is capable of passing
that information along to another subject. This guide discusses issues
involved in designing, implementing and evaluating DAC mechanisms. Its
primary purpose is to provide guidance to manufacturers on how to select and
build effective DAC mechanisms. Any examples of DAC mechanisms in this
document are not to be construed as the only implementations that will satisfy
the Criteria requirement. The examples are merely suggestions of appropriate
implementations. The Criteria is the only metric against which systems are to
be evaluated. In addition to showing examples of DAC mechanisms, this guide
will restate and elaborate on the Criteria requirements for DAC. This guide
is part of an on-going program to augment the Criteria on the issues and
features it addresses.
3. SCOPE
The guidelines and interpretations established in this document apply to the
discretionary access control requirements as expressed in the Criteria. The
recommendations apply to computer systems and products that are being built or
modified with the intention of meeting the requirements of the Criteria.
4. CONTROL OBJECTIVES
The term ``control objective'' refers to a statement of intent with respect to
control over some aspect of an organization's resources or processes. In
terms of a computer system, control objectives provide a framework for
developing a strategy for fulfilling a set of security requirements. In
particular, a given system can only be said to be secure with respect to its
enforcement of some specific policy [2]. The control objective for security
policy is as follows:
"The security policy is a statement of intent with regard to control over
access to, dissemination of, and modification of information. The
security policy must be precisely defined and implemented for each system
that is used to process sensitive information. The security policy must
accurately reflect the laws, regulations, and general policies from which
it is derived.''
Discretionary control is the most common type of access control mechanism
implemented in computer systems today. The basis of this kind of security is
that an individual user, or program operating on the user's behalf, is allowed
to specify explicitly the types of access other users (or programs executing
on their behalf) may have to information under the user's control.
Discretionary security differs from mandatory security in that it implements
the access control decisions of the user. Mandatory controls are driven by
the results of a comparison between the user's trust level or clearance and
the sensitivity designation of the information.
Discretionary controls are not a replacement for mandatory controls. In any
environment in which information is protected, discretionary security provides
for a finer granularity of control within the overall constraints of the
mandatory policy. Both discretionary and mandatory controls can be used to
implement an access control policy to handle multiple categories or types of
information, such as proprietary, financial, personnel or classified
information. Such information can be assigned different sensitivity
designations and those designations enforced by the mandatory controls.
Discretionary controls can give a user the discretion to specify the types of
access other users may have to information under the user's control,
consistent with the overriding mandatory policy restrictions. In a classified
environment, no person may have access to classified information unless: (a)
that person has been determined to be trustworthy, i.e., granted a personnel
security clearance - MANDATORY, and (b) access is necessary for the
performance of official duties, i.e., determined to have need-to-know -
DISCRETIONARY. The discretionary security control objective is:
Security policies defined for systems that are used to process classified
or other sensitive information must include provisions for the enforcement
of discretionary access control rules. That is, they must include a
consistent set of rules for controlling and limiting access based on
identified users who have been determined to have need-to-know for the
information.
2
5. DEFINITIONS
Discretionary Access Control (DAC)-The Criteria defines discretionary access
control as:
``A means of restricting access to objects based on the identity of
`subjects and/or groups to which they belong. The controls are
`discretionary in the sense that a subject with a certain access
`permission is capable of passing that permission (perhaps indirectly) on
`to any other subject."
DAC controls are used to restrict a user's access to protected objects on the
system. The user may also be restricted to a subset of the possible access
types available for those protected objects. Access types are the operations
a user may perform on a particular object (e.g., read, write, execute).
Typically, for each object, a particular user or set of users has the
authority to distribute and revoke access to that object. Users may grant or
rescind access to the objects they control based on "need to know" or "whom do
I' like" or other rules. DAC mechanisms control access based entirely on the
identities of users and objects.
The identity of the users and objects is the key to discretionary access
control. This concept is relatively straightforward in that the access
control matrix, defined below, contains the names of users on the rows and the
names of objects on the columns. Regardless of how the matrix is represented
in memory, whether by rows or by columns, the names of the users and objects
must be used in the representation. For example, in a row-based
representation an entry might read the equivalent of ``KIM can access KIMSFILE
and DONSFILE". In a column-based representation, one might find the
equivalent of "DONSFILE can be accessed by DON, JOE and KIM".
Other Definitions:
access control matrix-a two-dimensional matrix representing users on the rows
and objects on the columns. Each entry in the matrix represents the access
type held by that user to that object. Access control matrices are usually
sparsely populated and are represented in memory by row or by column,
eliminating storage requirements for empty entries. Sea figure 1 in Section 7
for an example of an access control matrix.
access mode-entries in the access control matrix that specify certain
operations a user may perform on an object, (e.g., read, write, execute,
delete).
access permission-permission of a user to access an object in some manner.
Entries in the access control matrix specify access permission. No access or
``null'' access may also be specified if desired.
control permission-a certain access mode that allows users to grant/revoke
access permission> and change access modes to objects. Sometimes this
includes the ability to pass control permission to other users.
defined groups-groups which have been defined to the DAC mechanism before
being used in access control decisions. Groups are normally defined by users
with special privileges, such as the system administrator. A group should be
defined by listing the identities of the members to be included in the group.
3
least privilege-this principle requires that each subject in a system be
granted the most restrictive set of privileges needed for the performance of
authorized tasks. The application of this principle limits the damage that
can result from accident, error, or unauthorized use.
named users-users that are uniquely identified to the TCB. The unique
identifier is to be used by the DAC mechanism to perform access control
decisions.
object-a passive entity that contains or receives information. Access to an
object potentially implies access to the information it contains. Examples of
objects can be: records, blocks, pages, segments, files, directories,
directory trees, and programs, as well as processors, video displays,
printers, network interfaces, 1/0 ports, etc.
ownership-a concept in which one user has total control over access to an
object. A subject operating on behalf of that user is normally the creator of
the object and is totally responsible for controlling access to it.
subject-an active entity, generally in the form of a process or device
operating on behalf of a user that causes information to flow among objects or
changes the system state. Technically, a process/domain pair.
Trojan horse-a computer program with an apparently or actually useful function
that contains additional (hidden) functions that surreptitiously exploit the
legitimate authorizations of the invoking process. An example is a program
that makes a "blind copy" of a sensitive file for the creator of the Trojan
horse.
Trusted Computing Base (TCB)The totality of protection mechanisms within a
computer system - including hardware, firmware, and software - the combination
of which is responsible for enforcing a security policy. A TCB consists of
one or more components that together enforce a unified security policy over a
product or system.
- -property--A Bell-LaPadula security model rule, called the ''star*property,''
that allows a subject write access to an object only if the security level of
the subject is dominated by the security level of the object. Also known as
the Confinement Property.
4
6. AN INHERENT DEFICIENCY IN DISCRETIONARY ACCESS CONTROL
6.1 A FUNDAMENTAL FLAW IN DISCRETIONARY ACCESS CONTROL
Discretionary access control mechanisms restrict access to objects based
solely on the identity of subjects who are trying to access them. This basic
principle of discretionary access control contains a fundamental flaw that
makes it vulnerable to Trojan horses [3], [4]. On most systems, any program
which runs on behalf of a user inherits the DAC access rights of that user
[5]. An example of the workings of a Trojan horse will illustrate how most
DAC mechanisms are vulnerable. Reference [6] contains such an example, which
is similar to the following:
6.2 AN EXAMPLE OF A TROJAN HORSE
Consider a system where an access control list mechanism (as described in
Section 7.3) is used to implement discretionary access control. There are two
users on this particular system: an honest user, DOE; and a dishonest user,
DRAKE. DOE has a data file which contains highly sensitive data; this file is
known as DOESFILE. He has diligently set the ACL to allow only himself to
read the file. No other users are authorized to access the file. DOE is
confident that no one but himself will be able to access his data file.
DRAKE is determined to gain access to DOESFILE. He has legitimate access to
the system which allows him to implement a useful utility program. In this
utility DRAKE embeds a covert function to read DOESFILE and copy the `contents
into a file in DRAKE's address space called DRAKESFILE. DRAKESFILE has an ACL
associated with it that allows processes executing on DOE's behalf to write to
it, while allowing DRAKE's processes to read it.
DRAKE induces DOE to execute his utility program by telling him how useful and
efficient it is. DRAKE is careful not to tell DOE about the covert function
(Trojan horse) that is resident in the utility program. DOE executes the
corrupted program and it appears to perform perfectly. However, while it is
operating on DOE's behalf, it assumes his identity and thus his access rights
to DOESFILE. At this time it copies the contents of DOESFILE to DRAKESFILE.
This copying takes place completely within the constraints of the DAC
mechanism, and DOE is unaware of what is happening.
This example should make clear the danger of Trojan horse attacks and the
inadequacy of most DAC mechanisms to protect against such attacks. It should
be noted that an elaborate DAC mechanism may provide illusory security to
users who are unaware of its vulnerability to Trojan horse attacks.
Configuration management, testing, and trusted distribution should ensure that
software produced by the computer system manufacturer does not contain Trojan
horses, especially if the system has a high EPL rating. However, software
from other sources does not come with these assurances. In very high threat
environments, it is wise to assume that unevaluated software does contain
Trojan horses. This assumption dictates that discretionary access control not
be used as the sole protection mechanism in high threat environments.
The Trojan horse threat can be reduced in systems that implement many domains
or dynamic small domains for each process. In most systems today, with only
user and supervisor
5
domains, all of the user's objects are available to a process running on that
user's behalf. If domains were created dynamically for each process, with
only the necessary objects available in that domain (implementing the least
privilege principle), then a Trojan horse would be limited to accessing only
those objects within the domain [5], [7].
A reference monitor which implements a mandatory security policy which
includes the *-property would provide robust protection against Trojan horse
attacks. The mandatory access control implementation would prevent the Trojan
horse from disclosing the information to a user who is not permitted access to
the information under the mandatory access rules. Assume the same scenario as
was described previously with the following changes. The computer system now
implements a mandatory security policy with two hierarchical sensitivity
levels. For the sake of simplicity, the levels are called sensitive and
non-sensitive. DOE operates at the sensitive level, and DOESFILE is
sensitive. DRAKE is not authorized to access sensitive data, so he operates
at the non-sensitive level. DRAKE is only allowed to read non-sensitive
files, so DRAKESFILE is non-sensitive. As before, DRAKE's Trojan horse
program is executed by DOE. The program takes on the sensitivity level and
the identity of DOE. Within the constraints of the mandatory and the
discretionary security policies, the program reads DOESFILE. However, when
the Trojan horse tries to write the sensitive data to DRAKESFILE, the
reference monitor disallows the operation. Since the Trojan horse is now
executing at the sensitive level, the program cannot be allowed to write to a
non-sensitive file. That would be a violation of the *-property [1].
This example should show the reader that discretionary access control is only
effective to restrict the ``honest'' user in browsing through other users'
files and preventing accidental disclosure or destruction of information. The
malicious user who is determined to gain unauthorized access to data on the
computer system must be restricted by other means, such as mandatory access
controls.
6
7. AN OVERVIEW OF DAC MECHANISMS
This section presents an overview of the most commonly used DAC mechanisms.
Each mechanism will be described briefly. Section 9 explains how each of
these mechanisms rates against the Criteria.
Implementing a complete DAC system requires retaining the information that is
represented by the access control matrix model in some form. An access
control matrix has users represented on the rows and protected objects on the
columns (see figure 1). The entries in the matrix describe what type of
access each user has to each object. Current operating systems have attempted
to represent that information using five basic mechanisms:
1 Capabilities
2. Profiles
3. Access Control Lists (ACLs)
4. Protection Bits
5. Passwords
ACCESS CONTROL MATRIX
Objects KIMSFILE DONSFILE PAYROL1 PAYROL2 DOESFILE
Users:
Kim rw r rw r
Joe r
Don rw r
Jones r
Doe rw
Mgr Jim cp cp c c c
Jan rw rw
Figure 1
The access control matrix such as the example in figure 1- above, is a
pictorial view of a set of users and their access permissions to a set of
protected objects. The access type ``r'' denotes read access and the access
type ``w'' denotes write access. The access type ``c'' means control
permission and the access type ``cp'' means control with passing ability. The
access types are explained in Section 8.
Capabilities and profiles represent the access control matrix information by
row, connecting the accessible objects to the user. ACLs and protection bits
represent the access control matrix information by column, connecting a list
of users to an object. As the balance of this section will demonstrate, ACLs
are the most flexible and usable DAC mechanism that can be implemented with
existing technology.
7.1 CAPABILITIES
In a capability-based system, access to protected objects such as files is
granted if the would- be accessor possesses a capability for the object. The
capability is a protected identifier that both identifies the object and
specifies the access rights to be allowed to the accessor who possesses the
capability. Two fundamental properties of capabilities are that they may be
7
passed from one accessor (subject) to another, and that the accessor who
possesses capabilities may not alter or fabricate capabilities without the
mediation of the operating system TCB.
Capability-based systems [8] provide dynamically changeable domains (name
spaces) for processes to run in. Ability to access an object is demonstrated
when a process has a capability or ``ticket'' to the object. The capability
also contains allowable access modes (e.g., read, write, execute). In some
implementations, programs can contain capabilities or capabilities can be
stored in files. They are protected by hardware and software mechanisms or by
encryption. Capabilities can usually be passed along to other processes and
can sometimes be increased or decreased in scope.
A pure capability system includes the ability for users to pass the capability
to other users. Because this ability is not controlled and capabilities can
be stored, determining all the users who have access for a particular object
generally is not possible. This makes a complete DAC implementation,
including revocation, very difficult. (Revocation may not be an issue,
however, since a user who has access to an object can make a copy of the
information in another object. Revoking the user's access on the original
object does not revoke access to the information contained in the user's copy.
After revocation, however, changes can be made to the original object without
the knowledge of revoked users.) For a discussion on revokable capabilities,
see Redell's paper [9].
Since capabilities implement dynamic domains they can ideally limit the
objects accessible to any program. This would limit a Trojan horse's access
to only the protected objects handed to it. At this time, few systems have
been implemented with capabilities and very few, if any, have attempted to
implement a complete DAC mechanism. Some research has been conducted in
restricting capabilities by overlaying a DAC mechanism [10].
Capabilities could be useful in enforcing the least privilege principle and
providing dynamically changeable domains, making discretionary access controls
less vulnerable to Trojan horse attacks. However, in order to pass the class
C2 and above DAC requirements, the ability for users to pass capabilities to
other users must be sufficiently controlled. There could be some design
difficulties in building capability-based mechanisms to satisfy the B3 DAC
requirement because of difficulty in implementing precisely defined groups
[11]. Also, at class B3 it is required that users be able to specify a list
of users that have permission (or do not have permission) to access each
object. Capability-based systems are row-based mechanisms and do not easily
lend themselves to this function. Deletion of an object from the system and
revocation of access present yet another problem. The problem is that
row-based systems do not provide an efficient means of determining which users
have access to a given object.
7.2 PROFILES
Profiles [12], which have been implemented in some form on several systems,
use a list of protected objects associated with each user. Since object names
are not consistent or amenable to grouping, their size and number are
difficult to reduce. If a user has access to many protected objects, the
profile can get very large and difficult to manage. Also, all protected
object names must be unique so full pathnames must be used. Creating,
deleting and changing access to protected objects requires many operations
since multiple users' profiles must be updated. Timely revocation of access
to an object is very difficult unless the user's profile is automatically
checked each time the object is accessed. Deleting an object
8
may require some method of determining every user who has the object in his
profile. In general, with profiles as with capabilities, answering the
question of who has access to a protected object is very difficult. Since
this is usually an important question in a secure system and more efficient
mechanisms exist, profiles are not a recommended implementation of DAC.
7.3 ACCESS CONTROL LISTS (ACLs)
ACLs allow any particular user to be allowed or disallowed access to a
particular protected object. They implement the access control matrix by
representing the columns as lists of users attached to the protected objects.
The lists do not have to be excessively long if groups and wild cards (see
below) are used. The use of groups raises the possibility of conflicts
between group and individual user. As an example, the ACL entries "PAYROL rw"
and "Jones.PAYROL r" appear to conflict, but can be resolved in the design of
the DAC mechanism. The Apollo system has a multiple, hierarchical group
mechanism. The ACL entry has the form ``user-id.group.organization .node." As
in Multics, if the ACL specifies access rights for the user by user-id then
group access rights are ignored. This allows a particular user to be excluded
or restricted in access rights [13]. In the Apollo, if a user is not on the
ACL by user-id, but is a member of a group, those rights are used and
organization and node memberships are not examined. Multiple group mechanisms
add more complexity and may facilitate administrative control of a system, but
do not affect the utility of a DAC mechanism.
Access to ACLs should be protected just as other objects are protected. The
creation of groups must be controlled, since becoming a member of a group can
change the objects accessible to any member. In many systems, e.g., Multics
[14], a user must be a member of at least one group. One detriment of the
group mechanism is that changing the members of a group results in changes to
an unknown set of ACLs for protected objects. Allocation of groups could be a
Systems Administrator function only, or it could be distributed to a Project
Administrator type function. Problems could result from allowing any user to
create a group and then be "owner'' of that group. If users were prohibited
from listing the members of groups they are not in because of covert channels
and privacy, it would be difficult to determine if a group was the correct one
to use. System or Project Administrator control is a preferred mechanism.
7.3.1 Wild Cards
A wild card mechanism allows a string replacement where the wild card is
specified. For example, in the Multics system ```PAYROL rw'' gives read and
write access to any user in the PAYROL group. ``Smith.* r'' gives Smith read
access, no matter what group the user Smith belongs to. ``*.*'' gives any
user access. The group and wild card mechanisms allow the ACL list to be kept
to a reasonable size. The use of wild cards raises the possibility of
conflicts if a user has multiple ACL entries for an object. In the above
example, Smith has a possible conflict; as a member of any group he can read
and as a member of the PAYROL group he can read and write. The system must
make a decision as to which one of the ACL entries it will apply when granting
Smith access to the object. Various systems have different rules for
resolving conflicts. One approach might be to have the system enforce an
ordering of the ACLs. Another approach might be to allow ordering of the ACLs
by the users.
9
In any case, the users must understand the rules in order to create effective
ACL entries. A wild card mechanism adds more complexity, but does not affect
the utility of a DAC mechanism. An exclusion capability, which allows a group
to be specified with certain members to be excluded, is also useful and is
required at class B3 and above.
7.3.2 Default ACLs
There are many side issues in the implementation of access control lists.
Default ACLs are usually necessary for the user friendliness of the DAC
mechanism. At the very least, when an object is created by a user, the user
should be placed on its ACL by default. Some of the other possible default
mechanisms include a system-wide default, a user-associated default or if the
file structure is a tree, a default associated with the directory.
A system-wide default could be used as the default in cases where no other
default had been specified. A system-wide default might give access only to
the creating user. A user-associated default might work well on a system with
a flat file structure. When a user is first entered on the system, his
default ACL would have to be specified.
For file structures that are trees, a default(s) associated with the directory
could be most efficient. If the user organizes the directory structure to
represent project work or areas of interest, then the ACLs for all objects in
a sub-tree would be similar. One default ACL in the directory would be for
children that are files. For children that are directories either a separate
sub-directory default ACL should be specified or the default ACLs should have
to be stated explicitly by the user. Otherwise, unless care is taken, those
with access to the root sections of the storage hierarchy could by automatic
default get access to all of the storage hierarchy. The overriding principle
of least privilege implies that the use of defaults should not inadvertently
give away more access than the user intended. In other words, to err on the
conservative side is preferred. In all implementations some user(s) must have
permission to change the ACLs after they have been set by default, and the
ability to change the defaults is very useful. Defaults can be implemented in
two ways: they can be copied to the ACL or they can be pointed to by the ACL.
If they are copied, then changes to the default will not affect the ACL;
otherwise, changes in the default may cause changes in many ACLs.
7.3.3 Named ACLs
Another possible user friendly feature is "named" ACLs. One implementation of
this feature uses a named ACL as a template. If a user often sets ACLs to the
same list of Users, the setting user may want to create a named ACL as a
template which, when used, copies that list into the ACL. When the named ACL
is changed, there is no effect on the ACLs already in existence. This use of
named ACLs has no particular detriments and is of limited usefulness. The
other implementation of named ACLs places a pointer in the real ACL to the
named ACL. Now when the named ACL gets changed, all of the real ACLs that use
it also get changed. This is very convenient for the user, but when a named
ACL is changed the user has no way of determining all of the protected objects
affected by the change. The named ACLs also have to be protected in the same
way as the real ACLs. Most of the features of named ACLs can be replaced by
some group and default mechanisms.
10
In summary, access control lists are the most desirable implementation of
discretionary access control. ACLs conveniently lend themselves to specifying
a list of named users who are allowed to access each object. Also, providing
access to defined groups of users is easily done with ACL-based mechanisms.
ACLs, if properly implemented, will satisfy the B3 DAC requirement. At class
B1 and above, care must be taken so that the implementation does not conflict
with mandatory controls.
7.4 PROTECTION BITS
Protection bits are an incomplete attempt to represent the access control
matrix by column. Implementation of protection bits include systems such as
UNIX [15], which use protection bits associated with objects instead of a list
of users who may access an object. (UNIX is a registered trademark of AT&T.)
In the UNIX case the protection bits indicate whether everyone, the object's
group or only the owner has any of the access modes to the protected object.
The user who created the object is the owner, and that can only be changed
through superuser privileges. The owner is the only one (besides a superuser)
who can change protection bits.
The problem with protection bits is that they are an incomplete implementation
of the access control matrix model. The system cannot conveniently allow or
disallow access to a protected object on any single user basis. It has been
suggested that groups be set up so that any needed combination of users can be
specified. But, for more than a few users, the combinatorics of such a
solution are unrealistic. Also, groups are controlled by the system
administrator, and such a scheme would require full-time attention.
7.5 PASSWORD DAC MECHANISMS
Password protection of objects attempts to represent the access control matrix
by row. If each user possessed his own password to each object, then the
password is a ticket to the object, similar to a capability system (except, of
course, with no dynamic domains). In most implementations of password
protection, only one password per object or one password per object per access
mode exists. Passwords. on protected objects have been used in IBM's MVS
[16] and with other mechanisms in CDC's NOS [17] to implement DAC.
Many problems are associated with using a password protected DAC system. The
use of passwords prevents the TCB from controlling distribution of access
permissions. The sharing of passwords takes place outside the system. For a
user to remember a password for each protected object is virtually impossible,
and if the passwords are stored in programs they are vulnerable. To restrict
access to certain access modes requires a password for each combination of
access modes, but in most systems that use passwords, access to a protected
object is all or none. In such implementations, revoking a user's access
requires revoking access from all other users with similar access and then
distributing a new password to those who are to retain access. This becomes
almost Impossible when passwords are stored in programs. To be secure,
passwords should be changed periodically, which is very difficult to do in
such password protected DAC systems. In systems such as MVS the default
access to a file is unrestricted access. A file is protected only when the
password protection is initiated for that file. Thus a new file in MVS is not
protected until the password protection mechanism is invoked.
11
If passwords are used as in the CDC NOS system to supplement another DAC
mechanism, they do have one positive aspect. If all objects are protected
with different passwords, Trojan horses can be restricted to only the objects
that are handed to them. The use of passwords for a complete DAC is strongly
discouraged, because there is no way to determine who has access to an object,
and because managing such a system properly is very difficult.
7.6 SUMMARY
Access control lists, if implemented properly, can satisfy the DAC requirement
for any class. Protection bits lack the ability to conveniently control
access to each object to the granularity of a single user. Row-based
mechanisms, such as capabilities and profiles, may encounter design problems
with revocation of access and group access to objects. Passwords should not
be used for discretionary access controls, except as a supplement to another
DAC mechanism, to reduce that mechanism's vulnerability to Trojan horses.
12
8. THE SET OF DAC ACCESS TYPES
In this section, control permissions and access modes for objects are
discussed. In the access control matrix (see figure I, in the previous
section), control permissions and access modes are the entries in the matrix
that specify what kind of access the subject has to the object.
Control permissions define which subjects have the ability to grant and revoke
access permissions and change access modes. Sometimes control permissions
include the ability to pass these control permissions to other subjects.
In contrast, access modes indicate a specific action that can be applied to
the object. For example, the `execute' mode allows the object to be executed.
8.1 CONTROL PERMISSIONS
In many current systems, the concept of control permissions is not separated
from access modes. In Multics, ``modify access'' on the directory is actually
the ability to change the ACLs of the children of the directory. It is
recommended that control permissions and access modes be kept conceptually
separate on any DAC system. This separation allows control of the object to
be separated from access to the object.
Two basic control permissions exist: control and control with passing ability.
The difference between these permissions is the. ability of the holder to
propagate control to other subjects.
- control - Subjects who have control permission to objects are able to pass
access permission and to set access modes to those objects for other
subjects. Control permission does not allow subjects who possess it to give
control to other subjects.
- control with passing ability - This control permission is identical to
control with the exception that the holder can pass his control permission to
other subjects. In a system implementing this permission, objects may have
more than one subject who are able to control them.
Since control permissions allow a subject to specify access to an object, they
can be used to implement the control model for a DAC system.
8.1.1 Control Models
The Criteria requires DAC controls on the ability to assign access permission
to an object by a user already possessing access permission. The ability to
assign these permissions should be controlled with the same precision as the
ability to access the objects themselves. For example, at class B3 it should
be possible to permit or prohibit both users and groups the authorization to
assign access permission. Four basic models for DAC control exist:
hierarchical, concept of ownership, laissez-faire, and centralized.
8.1.1.1 Hierarchical
Permissions to specify control of objects can be organized so that control is
hierarchical, similar to the way most businesses operate. A simple example
would have the system administrator at the root of the hierarchical tree. The
system administrator would eve control permission to all objects on the
system. This control permission would include the ability to pass those
control permissions to other subjects. The system administrator would
13
divide everyone else into subsets (e.g., departments), with each subset being
represented by a directory in the storage hierarchy. The default access for
each department would give the department head control permission for that
directory. The department heads would divide their subordinates into subsets
(e.g., projects) and set the defaults so that for each project, they give the
project heads control permission on their project directories. The users at
the bottom of the hierarchy would have no control permissions on any object.
Notice that those in the hierarchy who have control permission on an object
would be able to give themselves any access mode on the object. A
hierarchical or tree-structure file system is not required in order to
implement a hierarchical control model.
The advantage of a hierarchical structure is that control can be placed in the
most trusted hands and the control can mimic the organizational environment.
This should not imply, however, that control should be distributed based on
one's position in the hierarchy. It is sometimes appropriate that a manager
have no authorization for a subordinate's objects. The previously defined
hierarchical structure provides the ability for multiple users to have the
ability to control an object. Other hierarchical organizations can be
imagined and implemented using control permissions. Hierarchical
organizations could also be programmed into the DAC system without using
control permissions, but such a restrictive implementation would result in a
specific, fixed hierarchical structure. Such inflexible hierarchical control
is not recommended. The hierarchical control model would satisfy the DAC
requirement for all classes.
8.1.1.2 Concept of Ownership
Another control model associates with each object an owner (usually the
creator of the object) who is the only user that has control permission to
this object. The owner is always in ``full'' control of the objects that he
has created and has no ability to pass that control to any other subject.
Hence the owner may change the access permissions at any time in order to
grant and to deny the access rights of the objects under his control.
This near absolute control by owner can be implemented administratively. The
system administrator could set up the system so that the default access would
always contain control permission, but the ability to pass control permission
to other users would never be used on the system. Of course, the system
administrator has the ability to alter all of the access control on the
system. Therefore, owner control can be viewed as a limited hierarchical
system of only two levels and could be implemented with a flexible
hierarchical control model.
Another way to implement owner control is by programming it into the DAC
system and not implementing any control permissions. This will enforce the
owner concept because the creator of an object is known to the DAC mechanism
and can change the access, but has no method of passing control permission to
another user. UNIX is an example of an operating system where only the owner
of an object has the ability to change its access (protection bits).
A disadvantage of owner control is the difficulty it creates with regard to
non-owner users changing their access modes for an object (i.e., it is harder
to share the objects). In order to gain or lose any access to an object,
users must ask the owner of the object to grant or
14
revoke access for them. However, in some operating environments, this
disadvantage is actually a desired system characteristic.
Owner control of objects eliminates confusion concerning who controls access
to each object. This particular control model will meet the DAC requirement
for all classes.
8.1.1.3 Laissez-Faire
In this scheme, any user who has control permission with passing ability to an
object may pass that permission on to any other user. No concept of ownership
exists. The ACL will show all the users who can change the ACL of an object.
Once a user has passed on control permission with passing ability to other
users, they may pass this permission to other users without the consent of the
creator of the object. Once the access permissions are given away, keeping
control of an object is difficult. So long as the passing of control
permission is separate from the granting of access permission, the
laissez-faire control model will meet the DAC requirement for all classes.
However, if the model were to require the passing of control permission in
order to grant an access permission to a user, then the model would not meet
the C2 DAC requirement, because it could not control the propagation of access
rights.
8.1.1.4 Centralized
This control model gives one user, typically the system administrator, control
permission to all objects on the system. That user does not have the ability
to pass control on to other users. Thus- all control permission is held by
one user. To obtain access to any object, a user must request that the
controlling user grant him access permission. This places a considerable
burden on the controlling user. Additionally, if requests for access
permission are numerous, delays would probably result from the inflexibility
of this model. Although it has limited flexibility, this control model would
satisfy the DAC requirements for all classes.
8.1.2 File Structures and Control Permissions
Use of control permissions is also related to the structure of the storage
system. In operating systems where the storage system is tree structured, two
types of objects are involved: directories and files. (Directories are
sometimes called nodes, and files are sometimes called segments.) Control
permissions can be applied to both directories and files. Control permission
on a file changes control only to that particular file, but control permission
on a directory may be implemented as the ability to control not only the
directory but also all of the subdirectories and files under it (let us call
this extended directory control). This extended directory control implements
a very hierarchical control structure, since control permission on a directory
means that the subject can change any access on the whole subtree below that
directory.
A pure owner control policy could be implemented without using the extended
directory control. The subject who creates a file or a directory would
receive the ability to control either. The hierarchical control scheme
described above would use the extended directory control and the control
permission with passing ability. Giving the system administrator, the
department heads and the project leaders extended directory control to the
appropriate directory in the storage structure would give them control over
the appropriate portion of
15
the file system. Laissez-faire could use the extended directory control,
along with control permission with passing ability on both the directories and
the files.
Depending on the situation, one of the above schemes or a combination of the
above schemes could be used to implement the control model of the DAC
mechanism for any evaluation class.
8.2 ACCESS MODES
A fairly wide range of access modes are available in various DAC mechanisms.
Some implementations may combine some access modes, while other
implementations do not provide many access modes. How the access modes are
combined should be given careful consideration, because combining access modes
can limit the flexibility of the DAC mechanism. The names of any of the
access modes may vary from system to system. Many types of write access modes
have been implemented in different systems for controlling what changes can be
done to an object. This section discusses various read, write, execute, and
delete access modes.
-READ - allows an object to be read but not changed in any way. On most of
the systems, the READ mode also allows the object to be copied. Thus READ
gives all access to the object except WRITE, EXECUTE, and DELETE.
-WRITE-APPEND - allows a user to expand an object but does not allow a user
to change the previous contents of or view an object. WRITE-APPEND is also
known as WRITE-EXPAND.
-WRITE-CHANGE - allows a user to modify and to delete all or part of the
contents of an object but does not allow a user to expand or view the object.
-WRITE-UPDATE - allows a user to modify the contents of an object but does
not allow a user to add to, delete from, or view an object.
-WRITE - allows a user to modify, add, or delete the contents of an object
in any manner but does not allow a user to view an object.
In most operating systems little is known about the semantics of the data
stored in files, although some objects such as directories and mailboxes may
have more operating system manipulated structure associated with them. In
general write accesses such as WRITE- CHANGE and WRITE-UPDATE are very
difficult for an operating system to implement reliably. WRITE-APPEND, which
forces new data to be added only at the beginning or the end of an object, is
in the realm of most operating system architecture. If an operating system
could support it, WRITE-APPEND would be useful for logging and transaction
type operations.
-EXECUTE - allows a subject to run the object as an executable file. On
some systems EXECUTE access requires READ access. An EXECUTE without READ
would be recommended if a correct implementation is possible.
-DELETE - access mode allows an object to be deleted.
-NULL - access mode grants no access permissions and is used to allow
exclusion of a particular user in an ACL. Often a NULL access mode does not
exist but is implied in the ACL by specifying no access modes for a particular
entry.
16
-CONTROL - (See Section 8.1)
-CONTROL WITH PASSING ABILITY - (See Section 8.1)
8.2.1 File Structures and Access Modes
If the files are organized in a tree structure then the directories are used
to represent the non-leaf nodes of the tree. Three methods are available for
controlling the access to the directories and their associated files:
1. access controls on the files but not on the directories
2. access controls on the directories but not on the files
3. access controls on both the files and the directories.
If access mode controls are placed only on the directories then once a user is
given any access to a directory, he has the same access to all files under
this directory. Of course if one of the objects under this directory is
another directory (which we call a subdirectory) then users need access mode
permission to the subdirectory before they can access the objects under the
subdirectory. Placing access controls only on directories requires users to
group files according to access types. This requirement could be too
constrictive and could conflict with other reasons for grouping files. If
access mode controls are placed only on files then controls are of a finer
granularity. Access to individual files is controlled independently of other
files under the same directory. But if no access controls are placed on
directories, users could browse through the storage structure looking at the
names of other users' files. Also, there is no control on where in the tree
structure a subject could place a file, and this is usually the main purpose
of a tree structure. By having the access mode controls on both directories
and files, a subject needs the correct access mode permissions to both the
directory and the file before it is allowed to access the file. Access modes
for files are the basic software and hardware implemented access modes, such
as those listed in Section 8.2, since the operating system has no knowledge of
the semantics of the files. The rest of the objects (directories, mailboxes,
etc.) are data structures maintained by the operating system, and their access
modes are generally more elaborate extensions of the basic access modes and
are usually implemented by protected subsystems. In a system like UNIX, the
lack of execute access implies no access to the existing entire sub-tree under
that directory (ignoring an implementation of links as in UNIX and our earlier
discussion of access permissions). A user cannot give another user access to
a file without also giving the correct read access to the parent directories.
In Multics, the philosophy chosen was to enable a user to grant access to a
file just by setting the ACLs correctly on that file. Null access on a
directory will prevent a user from seeing the names or ACLs of the children of
that directory. But if the user has an access mode to a child, he can access
the child (he must already know its name). This complicates decisions about
when access should be given to the other attributes of a file (e.g., length,
date contents modified). Such decisions depend on the particular
implementation.
17
Write-append allows a user to add new objects to the directory (i.e., to
create files and sub- directories under the directory). Null is implied if no
access mode is specified.
In order to have more detailed access control, an implementor may add other
access modes to the minimal set. But the final implementation of the access
modes should not be so complicated that users cannot easily remember the
implication of each mode. If users cannot distinguish the functions of each
access mode, they will just grant to other subjects either the full access
rights or no access rights to an object. Also, implementations of any access
type must be consistent and guaranteed to always function correctly. In
implementing any access type, the designer must consider how much complexity
it adds to the trusted computing base, relative to the gain in functionality.
18
9. MEETING THE CRITERIA REQUIREMENTS
This section of the guide explains the DAC requirements in the Criteria and
presents implementation examples that will satisfy each requirement. DAC
requirements may be viewed as three levels. The first level is at the C1
Criteria class. The next level begins at class C2 and does not change through
class B2. The highest level requirement begins at class B3 and remains the
same at class Al. At each of these levels, this guide quotes the requirement
from the Criteria, explains what the requirement means, describes the minimum
functionality that is necessary to meet the requirement at that level (and the
functionality that is not required at that level), and presents an
implementation example which satisfies the requirement.
The reader should keep in mind that the implementations presented are not the
only ones that will meet their respective requirement. The combinations
possible with the mechanisms mentioned are too numerous to list here. Each
implementation must be evaluated on an individual basis. The implementation
selected should be as simple and user friendly as possible, while meeting the
control objective. Since the mechanism is user-invoked, if it is overly
complicated, users may avoid using it to its fullest extent.
9.1 THE C1 DAC REQUIREMENT
Following is the DAC requirement for Criteria class C1:
"The TCB shall define and control access between named users and named
objects (e.g., files and programs) in the ADP system. The enforcement
mechanism (e.g., self/group/public controls, access control lists) shall
allow users to specify and control sharing of those objects by named
individuals or defined groups or both."
Note that the class C1 requirement names examples of DAC mechanisms. These
examples are not the only mechanisms that will satisfy the requirement. Many
mechanisms are adequate to satisfy the C1 DAC requirement.
At class C1 , users do not need special privileges to be authorized to control
access to objects. Unprivileged users may control access to objects they can
access. A user with access to an object can in turn grant access to that
object to other users.
The class C1 DAC mechanism need only provide support to allow access/no
access; separate modes for read and write need not be supported.
Objects may be shared by defined groups. That is, a group of users that may
have access to an object must be defined to the TCB. Groups can be defined by
naming the users to be included in each group.
9.1.1 Minimum Functionality
- The DAC mechanism should control access to individual named objects by
named users.
- If the mechanism is not capable of the above function, it must at least
control access to each individual named object by defined user groups.
- The DAC mechanism must recognize and control access to individual objects.
19
9.1.2 Functionality Not Required
- Class C1 does not require that users be uniquely identified to the TCB.
The users could be members of a group and thereby lose uniqueness. Therefore,
it is not necessary for the C1 DAC mechanism to control access based on
individual user identities.
- Although it is not required, user groups should be predefined by
authorized users; that is, users who define groups should have some sort of
special privilege to do so.
In definitions for user groups, defining the members of the group by unique
user identifier is not necessary. For example, defining a group consisting of
anyone whose name starts with "M'' by using a wildcard such as ``M*'' would be
permissible.
- Newly created named objects do not need to be automatically protected.
Default public access is permissible at C1
- The C1 DAC requirement does not mandate controls to limit the propagation
of access rights. In other words, users possessing a certain access right may
or may not be permitted to pass that right on to other users at their own
discretion.
- It is not necessary to define different access modes, such as read and
write. The mechanism need only provide support to allow access/no access to
objects.
9.1.3 An Acceptable Implementation
This section describes a DAC mechanism which would satisfy the C1 DAC
requirement. This example is included for purposes of illustrating the
functionality necessary to meet this requirement.
This mechanism, called SEE-ONE, utilizes profiles, which contain a list of
accessible objects for each subject. When a new object is created on this
system, it is unprotected until the system administrator identifies it to the
DAC mechanism. From that point on, a subject must have that object's name in
his profile before he can access it. The system administrator must place the
name of the object on the profiles of the subjects who should be allowed to
access it. No access modes appear on the profiles. If an object is in a
subject's profile, that subject has total access to that object (read, write,
execute, delete). Subjects cannot pass access permissions on to other
subjects. This particular mechanism does not support user groups.
While SEE-ONE will satisfy the C1 DAC requirement, it is not without
drawbacks. Decentralizing control of protected objects from the system
administrator to the user community may be desirable. Most systems have a
considerable amount of object creation and deletion. Excessive object
creation and deletion could overburden the system administrator. The
implementation described here contains only the minimal functionality
necessary to meet the C1 DAC requirement.
9.2 THE C2 THROUGH B2 DAC REQUIREMENT
Following is the DAC requirement for Criteria classes C2 through B2:
"The TCB shall define and control access between named users and named
objects (e.g., files and programs) in the ADP system. The enforcement
mechanism.
20
(e.g., self/group/public controls, access control lists) shall allow users
to specify and control sharing of those objects by named individuals, or
defined groups of individuals, or by both, and shall provide controls to
limit propagation of access rights. The discretionary access control
mechanism shall, either by explicit user action or by default, provide that
objects are protected from unauthorized access. These access controls
shall be capable of including or excluding access to the granularity of a
single user. Access permission to an object by users not already
possessing access permission shall only be assigned by authorized users.''
At this level protection on newly created objects must not default to public
access. Either the system must have a specific rule that limits access to
each object to its creator or to a previously specified subset of users, or
the system must require the creator of an object to specify who will be
allowed to access it before allowing him to create that object. Limiting
access to the creator of the object is the method that is preferred.
The mechanism must have the ability to include or exclude access to objects on
a per user basis. If group access controls are provided, groups must be
precisely defined by listing the unique names of the users in the group.
Hence, groups are made of named users.
Users must possess special authorization to control access to objects. This
special authorization is called control permission (see section 8.1). The
authorization required may range from system administrator to users
controlling access to objects that they have created. The latter is preferred
because it does not require system administrator intervention. Either method
is acceptable, but the former method could result in delays if the system
administrator is not available.
9.2.1 Minimum Functionality
The minimum requirements specified here are in addition to the functionality
required to satisfy the C1 DAC requirement.
- The mechanism must provide the capability of including or excluding access
to each object on a per user (or per group if groups are implemented) basis.
- The mechanism must provide that all objects are protected. Protection by
default must be provided for all newly created objects at creation time.
- Users must possess control permission to assign access permission to
objects. This authorization usually takes the form of a special access type,
sometimes called CONTROL or OWNER.
- If group access controls are provided, groups must be precisely defined by
using the unique identifier of each member of the group.
9.2.2 Functionality Not Required
- Providing access to objects by groups of users is optional at this level.
- It is not necessary to define different access modes, such as read and
write. The mechanism need only provide support to allow access/no access to
objects.
21
9.2.3 An Acceptable Implementation
This section describes a DAC mechanism called SEE-TWO which would meet the
C2-B2 DAC requirement. The purpose of this description is to illustrate the
functionality that is necessary to meet the requirement.
This particular mechanism uses an ACL-like DAC mechanism. Each object has a
list of users who are allowed to access the object, along with the modes of
access the users have to the object. By including or excluding users' names
on the list, access can be controlled on each object to the granularity of a
single user.
When a creator requests the creation of an object, he must specify the desired
access controls. Otherwise, the mechanism will enforce a restrictive default
access control. The creator can grant other users the privilege of accessing
the object as he wishes. Only the creator has the privilege of passing access
on to other users. This concept is called ownership. Ownership is not
transferrable to other users. If the creator wishes, he can specify a default
protection list for all objects he creates. The default would contain a list
of all users which will be added to the protection list of any new objects
created by that subject.
This SEE-TWO implementation will satisfy the C2-B2 DAC requirement.
Furthermore, it has an advantage over the SEE-ONE implementation; the
management of an object is decentralized from the system administrator to the
owner of that object. A disadvantage of the SEE-TWO implementation is that it
does not provide the capability to grant access to groups of uniquely
identified users. Using this mechanism could be cumbersome in some
environments since all users must be explicitly listed. In other
environments, however, requiring the users to be explicitly listed is
desirable.
9.3 THE B3 THROUGH Al DAC REQUIREMENT
Following is the DAC requirement for Criteria classes B3 and A1.
"The TCB shall define and control access between named users and named
objects (e.g., files and programs) in the ADP system. The enforcement
mechanism (e.g., access control lists) shall allow users to specify and
control sharing of those objects, and shall provide controls to limit
propagation of access rights. The discretionary access control mechanism
shall, either by explicit user action or by default, provide that objects
are protected from unauthorized access. These access controls shall be
capable of specifying, for each named object, a list of named individuals
and a list of groups of named individuals with their respective modes of
access to that object. Furthermore, for each such named object, it shall
be possible to specify a list of named individuals and a list of groups of
named individuals for which no access to the object is to be given. Access
permission to an object by users not already possessing access permission
shall only be assigned by authorized users.''
At this level the requirement mandates that the DAC mechanism control access
to each named object. Access must be controlled on a per user basis. In
addition, access control based on groups of named users is required at this
level. Authorized users who control access to objects must be able to list
specific named users that are allowed to access each object they control.
They also must have the capability to list groups of named users that will be
22
allowed to access each object. These lists must also contain the respective
access modes that each named user or group of named users has on each object.
Additionally, for each object, authorized users must be able to specify a list
of named users and a list of groups of named users that are not to be allowed
to access that object. Thus, for example, an object could exist on a system
that is public read-only except for JOE. USER who is not allowed to access
the object at all.
9.3.1 Minimum Functionality
In addition to the minimum requirements stated in this section for the C1 and
C2-B2 DAC requirements, the following functionality must be supplied in order
for a mechanism to satisfy the B3-A DAC requirement.
- For each named object, the mechanism must provide the ability for authorized
users to specify a list of named users along with each user's respective modes
of access to the object.
- The mechanism must provide support to allow different access modes, such as
read and write. Merely providing for access/no access to objects is not
sufficient.
- For each named object, the mechanism must provide the ability for authorized
users to specify a list of groups of named users along with each group's
respective modes of access to the object.
- For each named object, the mechanism must provide the ability for authorized
users to specify a list of named users and groups of named users for which no
access will be allowed to that object.
9.3.2 An Acceptable Implementation
Following is an example of a DAC mechanism, called BEE-THREE, that would be
sufficient to satisfy the B3-A1 DAC requirement. This example is included for
the purpose of illustrating the functionality necessary to meet the
requirement.
When an object is created, an ACL that only permits access for the creator is
associated with the object. All objects are protected. Each object's ACL
describes the users or groups that can access it, along with their respective
access modes to that object. Protected objects are segments and directories.
The available access modes on segments are read, execute, and write. On
directories the available access modes are search, modify, and append. A
process must have modify access to the containing directory of an object in
order to modify the ACL of the object.
Access groups are defined by the system projects, which are also used for
accounting purposes. Only the system administrator can define projects by
listing the unique identities of each user to be included in the projects.
Users can be defined in more that one project, but can only be active in one
project at a time. Changing projects requires that users logout of the
system, and then login under the new project name.
If a user or group of users is listed on an object's ACL without an access
mode, that individual or group has no access to that object. If a subject has
more than one ACL entry on an object with conflicting access modes, the system
takes the most restrictive access mode. This makes it possible to give
everyone on a project access to an object, while
23
denying certain members of that project any access at all. This can be done
by including the project name on the ACL with the access mode desired while,
at the same time, including those users to be excluded on the ACL with no
access modes.
This BEE-THREE implementation will satisfy the B3-A1 DAC requirement.
Furthermore, it has an advantage over the SEE-TWO implementation: it provides
the capability to grant access to individual users or to groups of uniquely
identified users. However, in this implementation it is impossible to allow a
group some access to an object (such as read), but allow one group member some
additional access (such as read, write) to that object.
24
10. OTHER TOPICS
10.1 PROTECTED SUBSYSTEMS
In order to provide users with access types finer than the basic read, write,
execute, etc., some systems (actually a rather limited number) support
protected subsystems. Saltzer and Schroeder [13] refer to the need for
``protected subsystems,'' which they define as user- provided programs which
control access to files. By extending the access control mechanism to allow
objects to be accessed in ways specified by subjects (programs as well as
users), a system may allow a specific user-written program to be designated
``the only subject" allowed any access or a particular type of access to
specific files. A protected subsystem can be defined as a collection of
procedures and data objects that is encapsulated so that the internal
structure of a data object is accessible only to the procedures of the
protected subsystem, and the procedures may be called only at designated
domain entry points and only by designated subjects. The encapsulated data
files are the protected objects. Programs in a protected subsystem act as
managers for the protected objects and enforce user-written access controls on
them. Subjects outside the protected subsystem are allowed to manipulate the
protected objects only by invoking the manager programs. Any access
constraints that can be specified in an algorithm can be implemented in a
protected subsystem. Giving users the ability to construct protected
subsystems out of their own program and data files allows users to provide
more flexible controls on sharing. By allowing programs inside a protected
subsystem to invoke programs in another protected subsystem without
compromising the security of either, multiple protected subsystems can be used
to perform tasks. This limits the extent of damage a malicious or
malfunctioning borrowed program might inflict on objects protected by the
subsystem. Likewise, the lending user could also encapsulate the lent program
in a protected subsystem of its own to protect it from the programs of the
borrower. The danger of Trojan horse attacks and the inadequacy of most DAC
mechanisms to protect against such attacks was discussed in Section 6. A
protected subsystem which incorporates one of the DAC mechanisms discussed
earlier is no less vulnerable to attacks on objects within that subsystem.
Furthermore, readers should consider the effects of illusory security which
may be inherent with a protected subsystem. Apollo's Domain [18] implements
limited protected subsystems. Domain allows users to write their own
subsystems, but it does not provide a mechanism for protected subsystems to
interact with one another. A user has the ability to add a subsystem name to
a system- wide list of subsystems, thereby creating the subsystem. The user
then assigns a certain file to be a manager of the subsystem and another file
to be an object. The user then removes all other access to the object, making
the manager an exclusive accessor. Access to the subsystem is controlled by
the access control lists associated with the subsystem manager.
10.2 ADMINISTERING AND USING DAC
The Trusted Facility Manual (TFM) must explain to the system administrator how
to set up the DAC mechanism and how to properly administer a DAC system. The
manual must
25
explain how to identify the system security administrator and any project
administrators and their functions. The correct access must be set on the
system administration database, which would include user registry, group
definitions, etc. The manual must explain how access must be set to handle
fixing system problems including viewing dumps, and repairing file systems,
etc. Access must be set correctly to the standard libraries, including the
system commands and subroutines, initialization modules, and the operating
system's code. ACLs may need to be set on the supervisor entry points and the
I/O daemons or device queues.
The TFM must be easy to understand and follow, since proper set-up and proper
administration of the DAC mechanism is critical to its effectiveness. In
general, documentation should describe how to initialize the ACLs to best
provide a protected environment. If the DAC mechanism is flexible and
provides the ability to set up different control structures, examples should
be given for a range of control structures and must indicate settings required
for the product's evaluation class. The manual should explain Trojan horse
attacks and should give an example of one that could defeat the DAC mechanism
and be undiscovered by the audit mechanism.
The Security Features Users Guide (SFUG) must explain and give examples of how
to use the DAC mechanism. The manual should be easy for the users to
understand, since the mechanism is user-invoked. Like the manual for the
system administrator, the users' manual should explain Trojan horse attacks
and give an example of one that could defeat the DAC mechanism and be
undiscovered by the audit mechanism.
10.3 AUDITING DAC
Auditing is an important part of a secure computer system. Much of the
auditing on any operating system is not specific to the DAC mechanism, but in
many instances the DAC mechanism should place an entry in the audit log. Any
operation that changes the control structure of the DAC should be auditable.
Any change in any ACL, including the default ACLs, should be auditable. Any
attempt to access a DAC-protected object should be auditable. Any changes to
group definitions should be auditable. In general an audit log message should
include a timestamp, the subject's identity, the object's identity, the type
of action and any other pertinent information.
10.4 VERIFYING DAC
Verifying the correctness of the DAC mechanism is not well understood. As can
be seen by this paper, DAC does not have well defined rules as does mandatory
access control. In fact no formal model of the myriad of DAC implementations
currently exists although some mention is made of the DAC mechanisms in the
Bell and LaPadula [19] formal model for mandatory access control. In systems
such as SCOMP [20] whose design has been formally verified for security, the
only property that was proven about the DAC mechanism was that it did not
violate the mandatory access formal model. Research is needed in developing a
formal model(s) for DAC and verification of systems where DAC is important
should at least provide assurance by a structured argument that demonstrates
the DAC implementation's sufficiency to implement its specification.
26
10.5 DAC ADD-ONS
For some operating systems (e.g.. IBM MVS), products which provide DAC
mechanisms are available as `add-ons' (e.g., ACF2, Top Secret, RACF). The DAC
checks are made before the operating system gets a request for an object, and
the request is not forwarded to the operating system if it requests illegal
access. Such add-ons are basing their assurance on the inability of a user to
either get access to the operating system through another interface or to
cause the operating system to retrieve illegal data with a legal request.
Most add-on packages are applied to systems that would receive a D rating
against the Criteria if evaluated on their own. To demonstrate that an add-on
product operates as claimed, the add- on, along with the underlying operating
system, is evaluated as a total system. The security provided by the add-on
relies on the correct operation of the underlying system.
27
11. SUMMARY OF DESIRED DAC FEATURES
Regardless of the Criteria class a DAC mechanism is intended to satisfy, the
preferred DAC mechanism within the current state-of-the-art is the access
control list. The deletion of subjects and objects is a potential problem for
any DAC mechanism, including ACLs. Regardless of whether a subject or object
is deleted, the mechanism should handle the deletion efficiently, making sure
that any dangling references do not grant unintended access after the
deletion. An asset of ACLs is their design, which represents the access
control matrix by column. An object's ACLs are automatically purged when the
object is deleted. Unlike row-based mechanisms, ACLs do not require searching
the profiles of all subjects to determine who has access to the deleted
object. However, when subjects are removed from the ADP system, ACLs pose the
same problem; all system objects must be searched to purge that subject from
all ACLs. Since objects are much more volatile than subjects, ACLs are more
efficient than profiles.
At classes B3 through A1, access modes must be implemented, but they are
highly recommended at all lower levels of the Criteria. The access modes
read, execute, and write should be implemented at a minimum and write-append
should be considered.
At class C2 and above, some sort of control permission must be implemented.
The control models described in Section 8.1.1 are acceptable. The preferred
model is the concept of ownership model. This model assures that some user is
accountable for each object on the ADP system. Ownership should not be
transferrable between users. If it is transferrable, ownership transfers must
be audited.
Discretionary Access Control cannot deter hostile attempts to access sensitive
information. DAC mechanisms can be designed to eliminate casual browsing
through the storage system, to prevent accidental disclosure, modification,
and destruction of data, and to provide for the sharing of data between users.
A mandatory security policy must also be implemented to provide adequate
protection if users are not allowed to share all data on the system. An
effective audit trail mechanism is also necessary in order to detect hostile
attacks on the DAC mechanism.
28
12. REFERENCES
1. Department of Defense Trusted Computer System Evaluation
Criteria, DoD, DoD 5200.28-STD, 1985.
2. Schell, R. R., ``Security Kernels: A Methodical Design of System
Security,'' in Technical Papers, USE Inc., Spring Conference, 5-9 March 1979,
pp. 245-250.
3. Schroeder, M.D., Cooperation of Mutually Suspicious Subsystems, PhD
dissertation, M.I.T., 1972.
4. Boebert, W.E., and Ferguson, C.T., ``A Partial Solution to the
Discretionary Trojan Horse Problem,'' 9th Security Conference, DoD/NBS,
September 1985, pp 141-144.
5. Downs, D, ``Discretionary Access Control Guideline,'' Aerospace Report,
The Aerospace Corporation, September 1985.
6. Boebert, W.E., Kain, R.Y. and Young, W.D., ``Secure Computing: The Secure
Ada Target Approach,'' Scientific Honeyweller, Vol. 6, No. 2 July 1985, pp
1-17.
7. Saltzer, Jerome H., ``Protection and the Control of Information in
Multics,'' Communications of the ACM, Vol. 17, No. 7, July 1974, pp.
388-402.
8. Fabry, R.S., ``Capability-Based Addressing,'' Communications of
the ACM, Vol. 17, No. 7, July 1974, pp. 403-411.
9. Redell, D.D., ``Naming and Protection in Extensible Operating Systems,''
AD-A001 721, published by M.I.T., Cambridge MA, November 1974.
10. Karger, P.A. and Herbert, A.J., ``Lattice Security and Traceability of
Access,'' Symposium on Security and Privacy, IEEE, April 1984, pp. 13-23.
11. Gligor, V., Huskamp, J., Welke, S., Linn, C., and Mayfield, W.,
``Traditional Capability-Based Systems: An Analysis of Their Ability to Meet
the Trusted Computer Security Evaluation Criteria,'' IDA Paper Pl 935, October
1986.
12. Computer Associates, CA-SENTINEL Reference Guide, 1983.
13. Saltzer, Jerome H. and Schroeder, Michael D., ``The Protection of
Information in Computer Systems,'' Proceedings of the IEEE, Vol. 63, No. 9,
September 1975, pp. 1278- 1308.
14. Honeywell Informations Systems, Inc., Multics Programmer's
Manual-Reference Guide, 7 ed., AG91.
15. UC Berkeley, UNIX Programmer's Manual, 7 ed., 1981.
16. IBM, Access Method Services, 1983.
17. Control Data Corporation, NOS Version 2 Reference Set, 3 ed., 1983.
18. APOLLO Computer Inc., The DOMAIN System Administrator's Guide, 3 ed.,
1983.
19. Bell, D.E. and LaPadula, L.J., ``Secure Computer Systems: Unified
Exposition and Multics Interpretation','' Tech. report MTR-2997 Rev. 1,
MITRE Corp., March 1976.
20. Benzel Vickers, T., ``Overview of the SCOMP Architecture and
Security Mechanisms,'' Tech. report MTR-9071, MITRE Corp., September 1983.
29