💾 Archived View for spam.works › mirrors › textfiles › hacking › gateways captured on 2023-06-14 at 16:49:31.
-=-=-=-=-=-=-
From husc6!yale!cs.utexas.edu!jarvis.csri.toronto.edu!utgpu!trigraph!john Fri Feb 23 19:56:39 EST 1990 Article 3279 of comp.mail.misc: Path: husc6!yale!cs.utexas.edu!jarvis.csri.toronto.edu!utgpu!trigraph!john Newsgroups: comp.mail.misc,news.newusers.questions Subject: Inter-Network Mail Guide (23 Feb 90) Summary: monthly posting Message-ID: <nm0290@trigraph.UUCP> Date: 23 Feb 90 23:47:37 GMT Expires: 24 May 90 23:47:38 GMT Sender: "John J. Chew" <john@trigraph.UUCP> Reply-To: "John J. Chew" <poslfit@gpu.UTCS.UToronto.CA> Followup-To: comp.mail.misc Organization: Trigraph Inc., Toronto, Canada Lines: 264 Supersedes: <nm0190@trigraph.UUCP> Xref: husc6 comp.mail.misc:3279 news.newusers.questions:1573 References: # Inter-Network Mail Guide - Copyright 1990 by John J. Chew # $Header: netmail,v 1.8 90/02/23 17:48:09 john Exp $ # # INTRODUCTION # # This file documents methods of sending mail from one network to another. # It represents the aggregate knowledge of the readers of comp.mail.misc # and many contributors elsewhere. If you know of any corrections or # additions to this file, please read the file format documentation below # and then mail to me: John J. Chew <poslfit@gpu.utcs.utoronto.ca>. # # # HOW TO USE THIS GUIDE # # Each entry in this file describes how to get from one network to another. # To keep this file at a reasonable size, methods that can be generated by # transitivity (A->B and B->C gives A->B->C) are omitted. Entries are sorted # first by source network and then by destination network. This is what a # typical entry looks like: # # #F mynet # #T yournet # #R youraddress # #C contact address if any # #I send to "youraddress@thegateway" # # For parsing purposes, entries are separated by at least one blank line, # and each line of an entry begins with a `#' followed by a letter. Lines # beginning with `# ' are comments and need not be parsed. Lines which do # not start with a `#' at all should be ignored as they are probably mail # or news headers. # # #F (from) and #T (to) lines specify source and destination networks. # If you're sending me information about a new network, please give me # a brief description of the network so that I can add it to the list # below. The abbreviated network names used in #F and #T lines should # consist only of the characters a-z, 0-9 and `-' unless someone can # make a very convincing case for their favourite pi character. # # These are the currently known networks with abbreviated names: # # applelink Apple Computer, Inc.'s in-house network # bitnet international academic network # bix Byte Information eXchange: Byte magazine's commercial BBS # bmug Berkeley Macintosh Users Group # compuserve commercial time-sharing service # connect Connect Professional Information Network (commercial) # fax Facsimile document transmission # fidonet PC-based BBS network # geonet commercial information network # ieee-compmail A DIALCOM system supporting IEEE users # internet the Internet # mci MCI's commercial electronic mail service # mfenet Magnetic Fusion Energy Network # nasamail NASA internal electronic mail # sinet Schlumberger Information NETwork # span Space Physics Analysis Network # telemail Telenet's commercial mail service # thenet Texas Higher Education Network # usdamail A DIALCOM system supporting USDA researchers # # #R (recipient) gives an example of an address on the destination network, # to make it clear in subsequent lines what text requires subsitution. # # #C (contact) gives an address for inquiries concerning the gateway, # expressed as an address reachable from the source (#F) network. # Presumably, if you can't get the gateway to work at all, then knowing # an unreachable address on another network will not be of great help. # # #I (instructions) lines, of which there may be several, give verbal # instructions to a user of the source network to let them send mail # to a user on the destination network. Text that needs to be typed # will appear in double quotes, with C-style escapes if necessary. #F applelink #T bitnet #R user@site #I send to "user@site.bitnet@dasnet#" #F applelink #T internet #R user@domain #I send to "user@domain@dasnet#" #F compuserve #T fax #R +1 415 555 1212 #I send to "FAX 14155551212" (only to U.S.A.) #F compuserve #T internet #R user@domain #I send to ">INTERNET:user@domain" #F compuserve #T mci #R 123-4567 #I send to ">MCIMAIL:123-4567" #F connect #T internet #R user@domain #I send to CONNECT id "DASNET" #I first line of message: "\"user@domain\"@DASNET" #F fidonet #T internet #R user@domain #I send to "uucp" at nearest gateway site #I first line of message: "To: user@domain" #F ieee-compmail #T internet #R user@domain #I send to "INTERMAIL (134:CMP0817)" #I first line of body: "Forward: ARPA" #I second line of body: "To: user@domain" #I third line of body: "" (blank) #F internet #T applelink #R user #I send to "user@applelink.apple.com" #F internet #T bitnet #R user@site #I send to "user%site.bitnet@gateway" where "gateway" is a gateway host that #I is on both the internet and bitnet. Some examples of gateways are: #I cunyvm.cuny.edu mitvma.mit.edu. Check first to see what local policies #I are concerning inter-network forwarding. #F internet #T bix #R user #I send to "user@dcibix.das.net" #F internet #T bmug #R John Smith #I send to "John.Smith@bmug.fidonet.org" #F internet #T compuserve #R 7xxxx,yyy #I send to "7xxxx.yyy@compuserve.com" #F internet #T connect #R NAME #I send to "NAME@dcjcon.das.net" #F internet #T fidonet #R john smith at 1:2/3 #I send to "john.smith@f3.n2.z1.fidonet.org" #F internet #T geonet #R user@host #I send to "user@host.das.net" #F internet #T ieee-compmail #R CMP1234 #C Commercial Mail Relay <Intermail-Request@Intermail.ISI.EDU> #I send to "CMP1234%COMPMAIL@Intermail.ISI.EDU> #F internet #T mci #R John Smith (123-4567) #I send to "1234567@mcimail.com" #I or send to "JSMITH@mcimail.com" if "JSMITH" is unique #I or send to "John_Smith@mcimail.com" if "John Smith" is unique - note the #I underscore! #I or send to "John_Smith/1234567@mcimail.com" if "John Smith" is NOT unique #F internet #T mfenet #R user@mfenode #I send to "user%mfenode.mfenet@nmfecc.arpa" #F internet #T nasamail #R user #C <postmaster@ames.arc.nasa.gov> #I send to "user@nasamail.nasa.gov" #F internet #T sinet #R node::user or node1::node::user #I send to "user@node.SINet.SLB.COM" or "user%node@node1.SINet.SLB.COM" #F internet #T span #R user@host #C <NETMGR@nssdca.gsfc.nasa.gov> #I send to "user@host.span.NASA.gov" #I or to "user%host.span@ames.arc.nasa.gov" #F internet #T telemail #R [user/organization]system/country #C <Intermail-request@intermail.isi.edu> #I send to "\"[user/organization]system/country%TELEMAIL\"@intermail.isi.edu" #F internet #T thenet #R user@host #I send to "user%host.decnet@utadnx.cc.utexas.edu" #F internet #T usdamail #R AGS1234 #C Commercial Mail Relay <Intermail-Request@Intermail.ISI.EDU> #I send to "AGS1234%USDAMAIL@Intermail.ISI.EDU> #F mci #T internet #R John Smith <user@domain> #I at the "To:" prompt type "John Smith (EMS)" #I at the "EMS:" prompt type "internet" #I at the "Mbx:" prompt type "user@domain" #F nasamail #T internet #R user@domain #I at the "To:" prompt type "POSTMAN" #I at the "Subject:" prompt enter the subject of your message #I at the "Text:" prompt, i.e. as the first line of your message, #I enter "To: user@domain" #F sinet #T internet #R user@domain #I send to "M_MAILNOW::M_INTERNET::\"user@domain\"" #I or "M_MAILNOW::M_INTERNET::domain::user" #F span #T internet #R user@domain #C NETMGR@NSSDCA #I send to "AMES::\"user@domain\"" #F telemail #T internet #R user@domain #C <Intermail-Request@intermail.isi.edu> #I send to [INTERMAIL/USCISI]TELEMAIL/USA #I first line of message: "Forward: ARPA" #I second line of message: "To: user@domain" #F thenet #T internet #R user@domain #I send to UTADNX::WINS%" user@domain " #F usdamail #T internet #R user@domain #I send to "INTERMAIL (157:AGS9999)" #I first line of body: "Forward: ARPA" #I second line of body: "To: user@domain" #I third line of body: "" (blank)