💾 Archived View for spam.works › mirrors › textfiles › games › tilefaq.txt captured on 2023-06-14 at 16:43:29.
-=-=-=-=-=-=-
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
- Tile-Based Games FAQ version 1.2 =
= by Greg Taylor -
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
File : tilefaq.12
Home site: x2ftp.oulu.fi : pub/msdos/programming/docs
Version : 1.2
Released : 4-20-95
Tilefaq 1.2 Copyright 1995 Greg Taylor. All rights reserved.
Appendix I Copyright 1995 Chris Palmer. All rights reserved.
This document is freely redistributable provided that is
distributed in its entirety, with this copyright notice
included verbatim. There are no restrictions on works
derived from this document.
-------------------------
- I : Introduction... -
-------------------------
There has been a fair response to my initial release of this file
and there have been many requests for additional information, all of
which I will cover in this version.
This FAQ emphasizes on the style of graphics similar to those used
in U6 and U7 by Origin. Many of the techniques presented are aimed
at systems with limited memory and/or speed like PCs with a 640K barrier;
but this document also includes alternative methods and suggestions
on how to code for less restrictive systems. This is just a brief,
but hopefully complete overview of one method to achieving the
Tile-based style. There are other methods and I'd like to hear about
them, because much of this FAQ has been pieced together from various
implementations of the 'Tile' graphics style.
---------------------------------
- II : Multiple layered maps. -
---------------------------------
This is an essential section to master because of the possibilities
that stem from having more than one layer of map. Almost all of your
traditional effects can be more easily implemented with a multi-layer
map as compared to a single layered one.
One of the key considerations when doing a multi-layer map is the
speed of your drawing routines. Since you may be drawing each tile
several times, the speed at which that routine performs is vital to
producing a fast game. These should be coded in Assembly if possible
or if in a higher level language, should be optimized as well as
possible.
A 'SEE-THRU' tile placement routine is another important tool that
is a major part of Tile-games. I would separate my place-tile routine
into two independent routines, one with 0 pixels 'SEE-THRU' and the
other which doesn't. This allows you to place tiles that don't have
the need for the SEE-THRU option to be drawn faster.
-----------------------------------
- II i : SEE-THRU Tile routines -
-----------------------------------
For those who do not have a SEE-THRU routine written and are wondering
how you write one, here's a brief overview. Basically, when you are
copying your tile over, copy only the non-zero pixels to the screen
(it doesn't -have- to be zero, it can be any of the palette values, but
zero has become a sort of standard). And when you draw your tiles,
color the areas which you would like to be seen thru, with the zero
color. Thus allowing you to lay one tile over another, without
destroying all of the image beneath.
A SEE-THRU routine is slower due to the check for the zero value,
so it should only be used when necessary.
Another 'SEE-THRU' sort of technique I've seen used is what the programmer
termed a 'SEE-FORTH' routine. In this one he checked the destination
pixel and only put the pixel color where there wasn't already a pixel there
(ie the pixel location had a value of 0). This routine is not as useful
in tile games, but it is a possibility that I've seen used, so I thought
I'd mention it.
---------------------------------
- II ii : The Multiple Layers -
---------------------------------
I use a three-layer map and it works fairly well for all of the things
I do in my tile games. A fourth layer can provide even more effects
and a two layer map is possible as well, but I find three to be the
optimum number.
I split the layers up as such...(these will be referenced to throughout
the remainder of this text)
Layer Name - The types of tiles used in each layer...
BASE : Grass, Dirt, Brick, Stone, Doors, Water...
FRINGE : Trees, Rocks, Tables...
OBJECT : Swords, Booty, People, Monsters, Keys...
A sample map variable declaration with three layers might be...(C code)
#define SIZE 128
typedef struct {
unsigned char base[SIZE][SIZE];
unsigned char frng[SIZE][SIZE];
unsigned char obj[SIZE][SIZE];
} maptype;
Or perhaps...(to address the layers numerically) (C code)
typedef unsigned char maptype[3][SIZE][SIZE];
These are drawn on the screen in the order as listed above. The BASE
layer is drawn first, without the use of your SEE-THRU routine (Since
it's the base). Then you draw the FRINGE over the BASE using your
SEE-THRU routine.
The FRINGE layer is about the most useful tool in producing powerful
graphics easily. A FRINGE tile might be a tree, with zero-values every
where around the tree. Then you could place the tree on any of the
BASE tiles. This allows you to have one tree drawing, but it can be
a 'tree-on-grass' or a 'tree-on-dirt' or even a strange 'tree-in-the-
water'.
Other possible FRINGE tiles are transitions. These are like going
>from grass-to-dirt or dirt-to-stone. The FRINGE layer allows you to
draw one set of transitions, for example grass, and then use those
to do all of your grass-to-?? transitions. This is a nice use of the
FRINGE layer to save you from drawing endless tiles.
Tables and other non-pick-up-able objects are perfect for FRINGE, this
way they can be placed on any BASE tile you like. The possible uses of
this layer of map are enormous.
After drawing both of the other layers, draw your OBJECT layer. This
layer is where you store things that move or can be picked up, etc.
including monsters, keys, townspeople... This makes it easy to pick
up and put down objects without destroying other parts of your map.
---------------------------------------------------------
- III : Walkability - restricting character movement. -
---------------------------------------------------------
I usually assign an attribute I call the 'walkability' to my BASE tiles.
This provides a fast, easy, way to check whether you can/cannot move
to a certain space, and it also helps you to control other special
occurrences with a relative level of ease.
At each position in my map arrays, I have a byte (unsigned char) value
which serves as both the tile-index and the walkability value. I use
a set of 128 tiles, and split them up as such...
0-127
0-63 : Normal, walkable tiles, dirt, grass etc.
64-127 : Normal, unwalkable tiles, walls, etc.
128-255
128-191 : Special tiles, group 1
192-255 : Special tiles, group 2
When I'm drawing the screen, I simply use the REM (or MOD) statement or
equivalent to get the proper value, by MODing the number by 128. This
gives a value from 0-127, which is the actual tile-index number. When it
comes to checking if that tile is 'walkable', you then would divide the
number by 64, yielding a value of 0, 1, 2, or 3...
0 : Walking is OK
1 : Walking is not OK
2 : Special thing happens when they step here - group 1
3 : Special thing happens when they step here - group 2
The first two values are simply understood, but the special values might
need some explaining...This allows you to program in special occurrences
that happen when that space is walked on. When it hit's a special square
for instance, you would check through the special spots list for the x,y
coords of the spot that triggered the special occurrence and the level map
that it is on. This allows an easy way to throw cool stuff into your
game with little work. Why it is split into two groups is so that you
need not search ALL of your specials for that particular map at once,
searching for the effects of that one.
You will note that the WA (Walkability) value of 3 represents the section
of tiles which are unwalkable normally (like walls etc.) These can make
for excellent 'secret' walls and so forth.
The walkability setting can also be stored as a separate element of your
map structure, to increase speed, at the expense of memory. Having it
as a separate element allows you to include many more than 4 settings
to the rating, allowing for 'level exits' and so forth without having
to resort to listing them as 'specials'. The method I list above with
the byte being split into the various categories is the most general
compromise between, ease, speed, and memory, I have come up with; but on
systems where memory is not much of a constraint, having walkability stored
in a seperate element of the map structure is usually a better way to go.
More mention is made to the 'Walkability' values later in the text.
----------------------------------
- VI : Disappearing Roof Tiles -
----------------------------------
This effect can be done using my multi-layer method by simply sectioning
off a few of your base tiles (say 48-63 for example) as 'FLOOR' types.
These would have another tile in memory as well as their normal tile,
for when those floors are covered. In general, all of the FLOOR types
will be covered most of the time. When drawing your screen and come
upon a tile that is a FLOOR tile, then you'd check to see if the player
was standing on a tile of that type... If not, draw -only- the alternate
'ROOF' tile which corresponds to that FLOOR tile. If the player -is-
standing on a FLOOR tile of that type, draw the BASE, FRINGE and OBJECT
layers normally. This way you can have only the roofs where the player
is, disappear when they enter a building. (also see Appendix I)
------------------------------------------------
- V : Tilted effects, using the FRINGE Layer -
------------------------------------------------
I like the 'tilted' look in my tile projects, it gives a bit more of a
realistic flavor. If you have the memory, the best way to achieve this
effect is to set aside a 4th layer to your map, called the TILT layer
or something (it can also be used for ROOF file management if you like,
think about it :) ). But since most people don't have the memory for
four map layers in memory, I'll discuss the memory-deficient method.
Just draw the main portion of your tilted walls as your BASE layer
tiles, then use the FRINGE layer to hold the extra bits that tilt off of
the tile. You would have to do a special check to see if the FRINGE
layer tile in question is a tilt-result or a normal FRINGE tile, because
of the order of drawing. If it's a tilt-result, then you would want to
draw the OBJECT layer and the PLAYER before drawing the tilt-result
tile; and if not you'd follow the normal order of BASE-FRINGE-OBJ.
This is where the 4th TILT layer makes like easier, for those who have
the memory to use for it. It allows you to skip this check and just
draw in the normal order, since your normal FRINGE and tilt-results
are already split up...
------------------------------------------------
- VI : General comments on the OBJECT layer. -
------------------------------------------------
The OBJECT layer in my projects is an array the same as the other layers
of the map, of unsigned characters (or bytes). These have a value of
0 to 255, by the variable size. I find this to be enough objects to
cover my needs. Each number would be an index to a particular object,
0 meaning there's no object in that map-space. I split the byte up into
various object categories...for example 1-127 would be monsters and towns
people, 128-255 for inanimate objects...whatever. Anyway, I like to have
an 'intelligence' (much like walkability) assigned to various groups of
objects.
These are usually broken into groups of 16, for the ease of the math to
get the values...Below is an example break down of 'Intelligence' of
objects (more info on this style of attribute, see the 'Walkability'
section)...
INT Index : What behavior is exhibited by the Object...
0 0-15 : Townspeople...wander aimlessly...
1 16-31 : Townspeople/Monsters who are afraid of the character.
2 32-47 : Docile Monsters, wander aimlessly until attacked, at
which point their INT is switched to...3...
3 48-63 : Same Docile Monster pictures, but now they're mad!
4-5 64-95 : Normal monsters, they charge at a slow pace...
6 96-111 : Baddie monsters, they charge right at you..
7 112-127 : Projectile firing monsters...
8 128-143 : Keys, and other door-opening things.
9 144-159 : Weapon objects...
10 160-175 : Armor and the like...
11 176-191 : Cash, and other booty.
12-13 192-223 : Normal, plain objects, like books and candles.
14 224-239 : Some other Obj category...
15 240-255 : Objs that hold other objs...bags, chests, backpacks.
The above is just a sample chart of how you might choose to lay out
your OBJECTS to get the most efficient use of the INT value. I like
using an Intelligence to keep track of behavior of OBJECTS. Thus in
order to do the proper things for each OBJECT I would simple have to
check that object's INT and then do what I need to do for that OBJ.
It's helpful...understand? I hope so.
Many large projects will find that 255 just isn't enough objects, in
these cases, you'd be best advised to move to an array of unsigned
short variables (short ints...16bits) this allows for a value from
0 to 65535. That should be enough objects for any game I've ever
played!
------------------------------------------
- VII : Multiple OBJECTs on one space. -
------------------------------------------
The question was raised when I was discussing my methods with another
programmer, how do you handle multiple OBJECTs in one space? I never
really thought much about it before and just restricted OBJs to one
per space. The simplest method I came up with is special INT (see above
section) values for OBJs that hold other objects. These are things
like bags, backpacks, treasure chests, etc. In the example above
this is category 15, Indexes 240-255. The objects would have a picture
assigned to them as normal, but they would each have an independent
array of other OBJECTS that they hold. Each of them could have a
certain max set by your particular array structures. This way, when
you pick up those objects, -all- of the object list gets added to your
inventory. When there is a chest or bag on the ground you could also
drop a number of OBJs there and have them be filed off to the independent
array for that bag or chest.
This method is a good way to incorporate a way to have multiple objects
in one map space, without having a huge amount of additional map layers.
It's relatively speedy, and still memory efficient. Please note that
the maximum number of bags and other such mult-OBJ-objects, are limited
in number by the number of array structures that you assign to them, so
never include more than the number that you can handle on one map.
Often times the above method is too restrictive or doesn't match the play
style of the game. The alternate method is a bit more complicated and
requires a knowledge of the use of 'linked-lists'. If you aren't familiar
with linked-lists, pick up nearly any intro-book for your programming
language of choice and look up linked-lists on the index...you should find
it. Assuming a knowledge of linked-lists, I'll continue.
Change your object layer to an array of list pointers. Then as you place
objects in a map-location, add a node to the list at that location. When
objects are removed, remove the node. This will allow for an unlimited
(well, memory limited) number of objects on any particular map-location.
--------------------
- VIII : Cool FX -
--------------------
This section discusses some random cool effects I've come across, that
are relatively simple to implement and can really improve the 'look and
feel' of the game.
One such effect that I like doing rotating palettes. This is good for
flowing water in streams and smoking chimneys. You just run a rotating
palette which will change certain colors in a certain order which
produces good FX without much added programming time...
Also another cool effect is to animate your tiles, this can be done by
an array of pictures instead of just one being assigned to a tile; and
then incrementing thru the array during your playloop. For example you
might have a section of your FRINGE layer be animated tiles, one of which
is a 'fire'. This would rotate thru say...4 frames of a fire burning and
smoking etc....providing a nice effect for the player. Animating people/
monsters is also a nice addition for a better effect.
For those who are confident with palette manipulation routines, another
good effect can be achieved by lightening and darkening the palette. For
instance, a player is in a cave, with only a torch providing the light,
you could set up your palette so that as the tiles get further from the
light source (the torch) the darker they are drawn. A good way to do this
is to make a palette of say...64 colors and then have 4 copies of that
palette to make up your 256 color palette. A simple shift by 64 will
lighten or darken a whole tile.
Another way to achieve this same effect, but staying with a single palette
of 256 colors, is to create several 'reference-palette's. Sort through
your palette and create a cross-referenced palette for each darkness
level you want. Take each color on the palette and darken it the desired
ammount, then search the palette for the best match and keep that color's
index as the cross-reference value. These reference palettes can all be
calculated beforehand and stored to disk, so no real run-time slowdown is
introduced. When drawing a 'shaded-tile' (might be one of your settings in
your DrawTile routine along with SEE-THRU) check the appropriate darkness
cross-reference palette for each pixel value and draw the cross-referenced
value to the screen. This method is superior to the above method in that
it allows for much more dramatic shades and colors, but it's drawback
is that it's slower (do to the checking for -what- shade to make each
square, the actual drawing of a shaded square is just slightly slower).
Either of the above methods are good ways to do shadows and passing clouds
overhead etc. As alluded to in the example, they also provide a great way
to create a 'torch-light' effect, where the tiles fade to black as they
get further from the light source. You could also fade to a light grey for
a good 'fog' effect. If you are implementing a limited-display as described
in Appendix I of this document, you may want to combine the two algorythms
into one, to improve efficiency.
------------------------------------------------
- IX : Smooth Loading of new map sections... -
------------------------------------------------
This question comes up a lot. My way of dealing with it is splitting
my map into a LOT of little sections within my map-file. I load nine
sections of that map into memory at one time....
The Map Chunks in Memory.
/-------+-------+-------\
| | | |
| | | |
| | | |
+-------+-------+-------+
| | Where | |
| | Player| |
| | Is... | |
+-------+-------+-------+
| | | |
| | | |
| | | |
\-------+-------+-------/
Then when the player moves into a new section of the map, shift six
sections of map over in memory, then load in the three new sections.
This makes for smooth scrolling with no edges, without extremely long
load times.
Your on-disk map can be incredibly large, in fact, the only limit is the
ammount of disk space you have (or variable addressing, that is, if you
exceed a 4gig x 4gig map :), the in-memory map is only a little window of
that, then the displayed map is yet another subset window in that. On
standard memory limit systems (like dos, 640k barrier) you can set your
in-memory map to a fixed size. But when you have access to variable
ammounts of memory, it's usually best to adjust to the available memory.
Thus calculating the dimensions of your in-memory map to conform with
the memory available. This way if a user has a lot of memory, they can
benefit with load times occuring less often. This method pleases the
player with more memory (loads less often) but is a bit of a headache
to code; the variable size mapsegmenting is tricky.
-----------------------------------------
- IX : Portability and Speed vs. Size -
-----------------------------------------
This section is more of a discussion on programming style and suggestions
concerning that, but mention of it here may be useful for many tile-coders.
When coding any project, it is generally a good idea to keep that code
as 'portable' as possible. This loosely put means that you code using
'standard' functions and routines, and try to avoid using system or
compiler specifics in your code. I've run up against this head-on just
lately as I bought a new compiler which is 32-bit (as apposed to the
16-bit compiler I used before), and had to go through my code and completely
revise it to work under the new system. One of the main problems was my
use of the type 'int' (integer, I code in C mostly), which is 16-bit
on some systems, but 32-bit on others. To solve portability problems I've
now gone to rarely, if ever, using 'int' but in it's stead use 'short'
(a short integer, 16-bits) and 'long' (a long integer 32-bits), which are
the same under all of the compilers I use.
Also, many languages allow you to split your code into seperate chunks or
in the more formal circles known as 'units' or 'packages'. I split my
code two ways: one section is my standard library of game functions (my
fxlib) and the other section is the code for whatever game I'm working on.
This way I can save myself the trouble of cut-and-pasting code and some
of the problems that come with that, and just stick with my standard library
for those functions.
Along the lines of system specifics and segmentation of code, it is usally
best to stuff any system-dependent code off in one library or unit, so
that you only need to recode that one unit when porting the code to another
compiler/system. Examples of system-specific code are : graphics,
controller (mouse, keyboard, joystick), timing and of course assembly
(another porting problem I had...).
With some extra effort spent learning about portability, you can prevent
a *lot* of wasted time later revising code...
SIZE versus SPEED, the endless struggle. Though computers are getting faster
and have more memory, size and speed are still at odds and a balance must be
struck between them. There are many ways of going about coding various
parts of a game, each of which has varying size (memory used) and speed (how
fast they go). What each programmer must decide is what memory they must
sacrifice in order to gain added speed, or what speed they must sacrifice
to shrink the ammount of memory used. The methods described in this file
have been devised to generally strike a pretty good balance between size and
speed, though you can go either way with them, tuning them for smaller size
or tuning them for faster exicution. You'll have to use your own descretion
on what balance you want to strike, but I think that the methods in this
faq are pretty close to the optimal 'middle-ground'.
-------------------------------------------
- X : Last Minute Ideas...and thoughts. -
-------------------------------------------
Well I guess that's it for this version of the FAQ. It's not really
laid out in the Standard Question/Answer method, but it is in reasonable
categories to assist you in finding the info you want. Keep in mind
that this is just a summary of my method of Tiley-games, and thus there
are other (probably better) methods out there. My methods are
continuously growing and shifting, due to questions people ask me or
effects I see in other games, so if you've got any ideas I might be
interested in hearing them.
I've received some requests for some of my finished games using this
method...unfortunately, like so many programmers, I have not finished
a single Tile-RPG game. I always get a new idea for a better way to
do things half-way thru and start fresh...going nowhere. But thru the
hordes of half-projects I've developed a method that works well. I've
also been requested to put together a demo of my methods. I will likely
do such, but currently I'm very busy. When I do write up some sample
code, I'll post it at x2ftp.oulu.fi as well.
I do have one Shareware game currently on the market, it uses a small
offshoot of my tile-method; not nearly as complicated as the method
presented in this file. My current project(s) include directing a
multi-continental (literally) game project which will be implementing
a form of Genetic Algorhythms (Alife simulations) and the other is a
tile-based strategy wargame (with no name yet). This game (when I get
it finished) will demonstrate several of the methods discussed in this
document, amoung them : a 3-layer map, palette rotation for cool fx,
a single directional tilt, and other neat tile-stuffs.
I hope this FAQ gives a good enough summary of basic Tile-Game concepts
to get you started/finished with your programming projects. Have fun!
I can be reached for questions/comments/additions/etc. via email at :
gtaylor@oboe.aix.calpoly.edu
The latest version of this FAQ can be found at :
x2ftp.oulu.fi pub/msdos/programming/docs/tilefaq.*
May you code for many days and never have a bug. -=GT=-
----------------------------------------
- APPENDIX I : Limiting the display -
----------------------------------------
A common problem to most tile based games is "what can the player see?".
For example, in a dungeon setting you must be very careful to limit
what is shown to the player or else there is just no point including
secret doors.
Map: Display: