💾 Archived View for spam.works › mirrors › textfiles › computers › 2310-12 captured on 2023-06-14 at 15:58:09.
-=-=-=-=-=-=-
?????????????????????????????????????????????????????????????????????????
? Adaptec, Incorporated ACB-2310,12 ?
?????????????????????????????????????????????????????????????????????????
? J6 J9 J10 J3 J4 J5 J1(2312) ?
? ???????????????????????????????????????????????????????? ?
? ? ???? :::::1 1: 1: 1: 1: ????? ?
? ? :: :: :: :: ?? ?
? ? 123 :: :: :: :: ?? ?
? ? ::: :: :: ?? ?
? ? 456 :: :: ?? ?
? ? ?? ?
? ? ?? ?
? ? ?? ?
? ??????????????????????????????? ?? ????? ?
? ??????????????????????? ? ?
? INTERFACE: ISA(AT)->ST412(MFM) ?
? CONTROLS: 2 Floppy Drives (2312 only) (360KB, 720KB, 1.2MB, 144MB) ?
? 2 Hard Drives ?
? ?
? J9: Option Jumpers: 1: Disable I/O Waite State ? ?
? 2: Track-1 ReCal., Step=35us. ?Default ?
? 3: (Not Used) ?Setting is ?
? 4: Serial Monitor Mode ?NO JUMPERS ?
? 5: Diagnostics Enable ?installed. ?
? 6: (Reserved) ? ?
? ?
? J10: I/O Addresses: Hard Drive: *Primary Address (1F0H): OFF ?
? Secondary Address (170H): 4-5 ?
? ?
? Floppy Drive: *Primary Address (3F0H): OFF ?
? Secondary Address (370H): 1-2 ?
? ?
? J1: Floppy Drive (2312 only) (* Default setting) ?
? J5: HD Control ?
? J4: HD0 Data ?
? J3: HD1 Data ?
? J6: HD LED ?
???????????????????????????? ADDITIONAL INFO ????????????????????????????
? ?
? According to the Manufacturer, the ACB-2310/12 is 100% software and ?
? hardware compatible with the WD1003-WA2, but you are advised to do ?
? a Low Level Format to take advantage of the improved 1:1 Interleave ?
? that this controller offers. Note that there is no on-board BIOS, ?
? so no DOS Debug LLF option is available. Third party Formatting ?
? software is required, ie; Disk Manager(tm) or SpeedStor(tm). ?
? ?
? ?
? ?
? ?
? ?
? ?
? ?
? ?
? ?
?????????????????????????????????????????????????????????????????????????