💾 Archived View for spam.works › mirrors › textfiles › computers › 154xb captured on 2023-06-14 at 15:58:04.

View Raw

More Information

-=-=-=-=-=-=-


    ?????????????????????????????????????????????????????????????????????????
    ?  Adaptec, Incorporated                             AHA-1540B/42B      ?
    ?????????????????????????????????????????????????????????????????????????
    ?                       LED    FLOPPY       HARD DRIVE  F1              ?
    ?                      ??????????????????????????????????????           ?
    ?  Floppy (34 pins)    ?....  1:::::::   1::::::::::::: ??  ?????       ?
    ?  INT.HD.(50 pins)    ?                  ??2??    ??3???? ?????        ?
    ?  EXT.HD.(50 pins)    ?                      ??5??     ?? ? ? ?        ?
    ?                      ?             J5 1::::::::::::   1: ? ? ?EXT.    ?
    ?  ??2??  SCSI BUS     ?              J6 1::::          :: ? ? ?SCSI    ?
    ?  Term. Resistors     ? ???????              ????????  :: ? ? ?        ?
    ?                      ? ?uCODE?   J8 1:::::: ? BIOS ?  J7 ? ? ?        ?
    ?  F1: 1.5A, 125V      ? ??????? J9 1:::::::: ????????     ?????        ?
    ?  Term. Power Fuse    ?????????????       ??            ?????          ?
    ?                                  ???????????????????????   ?          ?
    ?                                                                       ?
    ?  INTERFACE:  ISA(AT)->SCSI-2                                          ?
    ?  CONTROLS:   2 Floppy Drives (1542B only)(360KB, 720KB, 1.2MB, 1.44MB)?
    ?              7 SCSI Devices                                           ?
    ?                                                                       ?
    ?  J5: General Control                                                  ?
    ?      J5-1: Synchronous Negotiation Enable: *Disabled: (no Jumper)     ?
    ?                                             Enabled: J5-1 Jumpered    ?
    ?                                                                       ?
    ?      J5-2: Diagnostics (Factory use ONLY): *Disabled: (no jumper)     ?
    ?                                                                       ?
    ?      J5-3: SCSI Parity Bit: *Enable Parity: (no jumper)               ?
    ?                              Disable Parity: J5-3 Jumpered            ?
    ?                                                                       ?
    ?      J5-4,5,6: SCSI Address:  0 1 2 3 4 5 6 7   (7 is Default)        ?
    ?                            4  x - x - x - x -                         ?
    ?                            5  x x - - x x - -   (x = Jumpered)        ?
    ?                            6  x x x x - - - -                         ?
    ?                                                                       ?
    ?      J5-7,8: DMA Channel:  0 5 6 7    (5 is Default)                  ?
    ?                         7  x - x -                                    ?
    ?                         8  x x - -                                    ?
    ?                                                                       ?
    ?      J5-9,10,11: Interrupt Chan.:  9 10 11 12 14 15  (11 is Default)  ?
    ?                                 9  -  x  -  x  -  x                   ?
    ?                                10  -  -  x  x  -  -                   ?
    ?                                11  -  -  -  -  x  x                   ?
    ?                                                                       ?
    ?      J5-12,13: DMA Transfer Speed:   5.0  5.7  6.7  8.0  (5.7 is      ?
    ?                                  12   -    x    -    x   Default)     ?
    ?                                  13   -    -    x    x                ?
    ?                                                                       ?
    ?  J6: BIOS/Auto Sense Control:  1 x      1: BIOS Enable                ?
    ?                                2 -      2,3,4: Not Used               ?
    ?                                3 -      5: Auto Sense disable         ?
    ?                                4 -                                    ?
    ?                                5 -      (1 is Default)                ?
    ?                                                                       ?
    ?                                                                       ?
    ?????????????????????????????????????????????????????????????????????????
                                                                            
    ?????????????????????????????????????????????????????????????????????????
    ?   AHA-1540B,1542B                                             Page 2  ?
    ?????????????????????????????????????????????????????????????????????????
    ?                                                                       ?
    ?  J7: Address Selection                                                ?
    ?                                                                       ?
    ?      J7-1: Floppy Secondary Address  (Default is not jumpered)        ?
    ?                                                                       ?
    ?      J7-2,3,4: AT I/O Port Addr.:  334 330 230 134 130                ?
    ?                                 2   -   x   -   x   -    (Default     ?
    ?                                 3   -   -   x   x   -    is 330h)     ?
    ?                                 4   -   -   -   x   x                 ?
    ?                                                                       ?
    ?     J7-5,6: BIOS Wait State (ns):   0  100 200 300                    ?
    ?                                 5   -   x   -   x        (Default     ?
    ?                                 6   -   -   x   x          is 0)      ?
    ?                                                                       ?
    ?     J7-7,8: BIOS Address:   DC000 CC000 D8000 C8000                   ?
    ?                         7     -     x     -     x        (Default     ?
    ?                         8     -     -     x     x        is DC000)    ?
    ?                                                                       ?
    ?  J8: Floppy Disk Selection:    1: Floppy Enable       (on  Enabled )  ?
    ?                              2,3: DMA REQ. (2 or 3)   (2  DMA REQ.2)  ?
    ?        (1542B only)          4,5: DMA ACK. (2 or 3)   (4  DMA ACK.2)  ?
    ?                              6,7: INT.REQ. (6 or 10)  (6  INT.REQ.6)  ?
    ?                                8: Dual Speed Enable   (off Disabled)  ?
    ?                                                                       ?
    ?  J9: DMA/Interrupt:   1,2,3,4: DMA REQ. (0,5,6,7)     (2  DMA REQ.5)  ?
    ?                       5,6,7,8: DMA ACK. (0,5,6,7)     (6  DMA ACK.5)  ?
    ?              9,10,11,12,13,14: INT.REQ. (9,10,11,                     ?
    ?                                         12,14,15)     (11 INT.REQ.11) ?
    ?                                                                       ?
    ???????????????????????????? Additional Info ????????????????????????????
    ?                                                                       ?
    ?    This Host Adapter may also be ordered with a high-density SCSI-2   ?
    ? external connector, as part no: 1540B100 or 1542B100.                 ?
    ?                                                                       ?
    ?    SCSI bus terminators MUST be located at each end of the SCSI bus.  ?
    ? If using internal SCSI peripherals only, the terminators on the H.A.  ?
    ? must remain in place, and the device at the farthest point must also  ?
    ? have it's terminators in place.  All devices between must have their  ?
    ? terminators removed.  If using internal AND external peripherals,     ?
    ? the devices at the end of the internal, and external cables should    ?
    ? retain their terminators, and all those between, including the Host   ?
    ? Adapter, should have theirs removed.                                  ?
    ?                                                                       ?
    ?    Adaptec has added support for drives larger than 1GB with their    ?
    ? 3.20 BIOS and uCODE.  When correctly set up, the host adapter will    ?
    ? automatically select the correct translation for the drive.  The      ?
    ? translation for drives over 1GB increases the heads.                  ?
    ?                                                                       ?
    ?   The 154x series is a Bus Mastering Host Adapter, and is well-suited ?
    ? for multi-tasking Operating Systems, such as UNIX and OS/2.           ?
    ?????????????????????????????????????????????????????????????????????????