💾 Archived View for spam.works › mirrors › textfiles › bbs › cshcommy.txt captured on 2023-06-14 at 15:52:19.
-=-=-=-=-=-=-
How To Crash a Commadore BBS
Part One - How to crash a RAVICS BBS
Try to chat with the sysop. If it starts to say "Attemp #1" and so on, then
just hit 'C' >VERY< fast a few hundred times. After it pages the sysop about
30 times it will give an out of memory error in such and such a line.
Part Two - How to crash an IIBBS
This will only work if the sysop is running either an un-modified version
of IIBBS, or he has the very first version. Log on as a new user. Log off
and then log on again as a new user. Then log off and try to log on again
as the SECOND new user you logged in as. In the old version, the BBS dosn't
initialize the drive after writing to the relative file. Therefore, when you
try to log in as the second new user, it will try to read past the bad
position but will never find it. This will leave his drive spinning until
he can come in and reset the system. If it dosn't work the first time try
again with two more new users, and so on. The system will just sit there
sending a carrier to you. When the drive is left spinning it will heat up the
metal frame in inside of the 1541 drive. This will cause the readwwrite head
to be knocked out of alignment, costing the sysop a mere $45...
Part 3 - How to crash a 64 Exchange
Go into the download section and start to download a file. When it is ready
to send (it should say 'A to abort, B to change block size. Ready to send')
then select B and enter '99e99' when it asks for the new block size (99e99 is
a number bigger than the computer can accept). This will only work on older
versions of 64 Exchange.
Part One - Another Way to Crash IIBBS
Log on and enter the message base. At the prompt enter '99e99'. This will
cause an overflow error. If the sysop has a crash handling routine, then
use the method in How to Crash C64 BBS's - I and fry his drive. Here is
another way. If you log in and it says 'You have mail' or whatever, but it
dosn't list who it's from and the date, then go into the e-mail section.
Proceed to read your mail. It should say 'No mail found' or whatever. At the
prompt, enter 'R' for reply or 'D' for delete. It will delete your mail and
cause an Illegal quantity error.
Part Two - How to Crash a RAVICS V9.3
Log on as a new user. When it say it's creating your ID hit a bunch of keys.
This will lock up the program and leave his drive spinning.
Part Three - How to Crash Hal BBS 4.6
Enter 255 for your ID # and 'HAL' for the password. If the sysop has the
BASIC version this won't work. But if it does you will now be in the sysop
menu. Have fun...
Part Four - How to Crash Ace Line 3.5
Log on and check to see if they are running the version modified by General
Zod (it should have his name all over it). If it is just call back about 10
times. Sooner or later it will cause an Out of Memory error.