💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc8295.txt captured on 2023-06-14 at 15:00:18.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) S. Turner
Request for Comments: 8295 sn3rd
Category: Standards Track January 2018
ISSN: 2070-1721
EST (Enrollment over Secure Transport) Extensions
Abstract
The EST (Enrollment over Secure Transport) protocol defines the Well-
Known URI (Uniform Resource Identifier) -- /.well-known/est -- along
with a number of other path components that clients use for PKI
(Public Key Infrastructure) services, namely certificate enrollment
(e.g., /simpleenroll). This document defines a number of other PKI
services as additional path components -- specifically, firmware and
trust anchors as well as symmetric, asymmetric, and encrypted keys.
This document also specifies the PAL (Package Availability List),
which is an XML (Extensible Markup Language) file or JSON (JavaScript
Object Notation) object that clients use to retrieve packages
available and authorized for them. This document extends the EST
server path components to provide these additional services.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8295.
Turner Standards Track [Page 1]
RFC 8295 EST Extensions January 2018
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................4
1.1. Definitions ................................................6
1.2. Authentication and Authorization ...........................7
1.3. TLS Cipher Suites ..........................................7
1.4. URI Configuration ..........................................7
1.5. Message Types ..............................................8
1.6. Key Words .................................................10
2. Locate Available Packages ......................................10
2.1. PAL Format ................................................12
2.1.1. PAL Package Types ..................................14
2.1.2. PAL XML Schema .....................................19
2.1.3. PAL JSON Object ....................................23
2.2. Request PAL ...............................................23
2.3. Provide PAL ...............................................24
3. Distribute EE Certificates .....................................25
3.1. EE Certificate Request ....................................25
3.2. EE Certificate Response ...................................26
4. Distribute CRLs and ARLs .......................................26
4.1. CRL Request ...............................................26
4.2. CRL Response ..............................................26
5. Symmetric Keys, Receipts, and Errors ...........................27
5.1. Symmetric Keys ............................................27
5.1.1. Distribute Symmetric Keys ..........................28
5.1.2. Symmetric Key Response .............................28
5.2. Symmetric Key Receipts and Errors .........................29
5.2.1. Provide Symmetric Key Receipt or Error .............30
5.2.2. Symmetric Key Receipt or Error Response ............31
Turner Standards Track [Page 2]
RFC 8295 EST Extensions January 2018
6. Firmware, Receipts, and Errors .................................31
6.1. Firmware ..................................................31
6.1.1. Distribute Firmware ................................32
6.1.2. Firmware Response ..................................32
6.2. Firmware Receipts and Errors ..............................33
6.2.1. Provide Firmware Receipt or Error ..................33
6.2.2. Firmware Receipt or Error Response .................33
7. Trust Anchor Management Protocol ...............................34
7.1. TAMP Status Query, Trust Anchor Update,
Apex Trust Anchor Update, Community Update,
and Sequence Number Adjust ................................34
7.1.1. Request TAMP Packages ..............................34
7.1.2. Return TAMP Packages ...............................35
7.2. TAMP Responses, Confirms, and Errors ......................35
7.2.1. Provide TAMP Responses, Confirms, or Errors ........36
7.2.2. TAMP Responses, Confirms, and Error Responses ......36
8. Asymmetric Keys, Receipts, and Errors ..........................36
8.1. Asymmetric Key Encapsulation ..............................37
8.2. Asymmetric Key Package Receipts and Errors ................38
8.3. PKCS #12 ..................................................39
8.3.1. Server-Side Key Generation Request .................39
8.3.2. Server-Side Key Generation Response ................39
9. PAL and Certificate Enrollment .................................40
10. Security Considerations .......................................43
11. IANA Considerations ...........................................44
11.1. PAL Name Space ...........................................44
11.2. PAL XML Schema ...........................................44
11.3. PAL Package Types ........................................44
12. References ....................................................45
12.1. Normative References .....................................45
12.2. Informative References ...................................50
Appendix A. Example Use of PAL ....................................51
Appendix B. Additional CSR Attributes .............................53
Acknowledgements ..................................................54
Author's Address ..................................................54
Turner Standards Track [Page 3]
RFC 8295 EST Extensions January 2018
1. Introduction
The EST (Enrollment over Secure Transport) protocol [RFC7030] defines
the Well-Known URI (Uniform Resource Identifier) -- /.well-known/est
-- to support selected services related to the PKI (Public Key
Infrastructure), with such PCs (path components) as simple enrollment
with /simpleenroll, rekey or renew with /simplereenroll, etc. A
server that wishes to support additional PKI-related services and
other security-related packages could use the same .well-known URI by
defining additional PCs. This document defines six such PCs:
o /pal - The PAL (Package Availability List) provides a list of all
known packages available and authorized for a client. By
accessing the service provided by this PC first, the client can
walk through the PAL and download all the packages necessary to
begin operating securely. The PAL essentially points to other
PCs, including the PCs defined in this document as well as those
defined in [RFC7030] (e.g., /cacerts, /simpleenroll,
/simplereenroll, /fullcmc, /serverkeygen, and /csrattrs). The
/pal PC is described in Section 2.
o /eecerts - EE (End-Entity) certificates [RFC5280] are needed by
the client when they invoke a security protocol for communicating
with a peer (i.e., they become operational and do something
meaningful as opposed to just communicating with the
infrastructure). If the infrastructure knows the certificate(s)
needed by the client, then providing the peer's certificate avoids
the client having to discover the peer's certificate. This
service is not meant to be a general-purpose repository to which
clients query a "repository" and then get a response; this is
purely a push mechanism. The /eecerts PC is described in
Section 3.
o /crls - CRLs (Certificate Revocation Lists) and ARLs (Authority
Revocation Lists) [RFC5280] are also needed by the client when
they validate certificate paths. CRLs (and ARLs) from TAs (Trust
Anchors) and intermediate CAs (Certification Authorities) are
needed to validate the certificates used to generate the client's
certificate or the peer's certificate, which is provided by the
/eecerts PC, and providing them saves the client from having to
"discover" them and then retrieve them. CRL "discovery" is
greatly aided by the inclusion of the CRL Distribution Point
certificate extension [RFC5280], but this extension is not always
present in certificates and requires another connection to
retrieve them. Like the /eecerts PC, this service is not meant to
be a general-purpose repository to which clients query a
repository and then get a response; this is purely a push
mechanism. The /crls PC is described in Section 4.
Turner Standards Track [Page 4]
RFC 8295 EST Extensions January 2018
o /symmetrickeys - In some cases, clients use symmetric keys
[RFC6031] when communicating with their peers. If the client's
peers are known by the server a priori, then providing them saves
the client or an administrator from later having to find,
retrieve, and install them. Like the /eecerts and /crls PCs, this
service is not meant to be a general-purpose repository to which
clients query a repository and then get a response; this is purely
a push mechanism for the keys themselves. However, things do not
always go as planned, and clients need to inform the server about
any errors. If things did go well, then the client, if requested,
needs to provide a receipt [RFC7191]. The /symmetrickeys and
/symmetrickeys/return PCs are described in Section 5.
o /firmware - Some client firmware and software support automatic
update mechanisms, and some do not. For those that do not, the
/firmware PC provides a mechanism for the infrastructure to inform
the client that firmware and software updates [RFC4108] are
available. Because updates do not always go as planned and
because sometimes the server needs to know whether the firmware
was received and processed, this PC also provides a mechanism to
return errors and receipts. The /firmware and /firmware/return
PCs are defined in Section 6.
o /tamp - To control the TAs in client TA databases, servers use the
/tamp PC to request that clients retrieve TAMP (Trust Anchor
Management Protocol) query, update, and adjust packages [RFC5934],
and clients use the /tamp/return PC to return TAMP responses,
confirms, and errors [RFC5934]. The /tamp and /tamp/return PCs
are defined in Section 7.
This document also extends the /est/serverkeygen PC [RFC7030] to
support the following (see Section 8):
o Returning asymmetric key package receipts and errors [RFC7191].
o Encapsulating returned asymmetric keys in additional CMS
(Cryptographic Message Syntax) content types [RFC7193].
o Returning server-generated public key pairs encapsulated in
PKCS #12 (Public Key Cryptography Standard #12) [RFC7292].
While the motivation is to provide packages to clients during
enrollment so that they can perform securely after enrollment, the
services defined in this specification can be used after enrollment.
Turner Standards Track [Page 5]
RFC 8295 EST Extensions January 2018
1.1. Definitions
Familiarity with the following specifications is assumed:
o "Using Cryptographic Message Syntax (CMS) to Protect Firmware
Packages" [RFC4108]
o "Certificate Management over CMS (CMC)" [RFC5272]
o "Cryptographic Message Syntax (CMS) Encrypted Key Package Content
Type" [RFC6032]
o "Cryptographic Message Syntax (CMS)" [RFC5652]
o "Additional New ASN.1 Modules for the Cryptographic Message Syntax
(CMS) and the Public Key Infrastructure Using X.509 (PKIX)"
[RFC6268]
o "Trust Anchor Management Protocol (TAMP)" [RFC5934]
o "Cryptographic Message Syntax (CMS) Content Constraints Extension"
[RFC6010]
o "Cryptographic Message Syntax (CMS) Symmetric Key Package Content
Type" [RFC6031]
o "Enrollment over Secure Transport" [RFC7030]
o "Cryptographic Message Syntax (CMS) Key Package Receipt and Error
Content Types" [RFC7191]
Also, familiarity with the CMS protecting content types signed-data
and encrypted-data [RFC5652] is assumed. The CMS encrypted key
package is defined in [RFC6032].
In addition to the definitions found in [RFC7030], the following
definitions are used in this document:
Agent: An entity that performs functions on behalf of a client.
Agents can service a) one or more clients on the same network as
the server, b) clients on non-IP-based networks, or c) clients
that have a non-electronic air gap [RFC4949] between themselves
and the server. Interactions between the agent and client in the
last two cases are beyond the scope of this document. Before an
agent can service clients, the agent must have a trust
relationship with the server (i.e., be authorized to act on behalf
of clients).
Turner Standards Track [Page 6]
RFC 8295 EST Extensions January 2018
Client: A device that ultimately consumes and uses the packages to
enable communications. In other words, the client is the endpoint
for the packages, and an agent may have one or more clients. To
avoid confusion, this document henceforth uses the term "client"
to refer to both agents and clients.
Package: An object that contains one or more content types. There
are numerous types of packages, e.g., packages for asymmetric
keys, symmetric keys, encrypted keys, CRLs, firmware, and TAMP.
See Section 2.1.1. All of these packages are digitally signed by
their creator and encapsulated in a CMS signed-data [RFC5652]
[RFC6268] (except the public key certificates and CRLs that are
already digitally signed by a CA): firmware receipts and errors;
TAMP responses, confirms, and errors; and "key package" receipts
and errors that can be optionally signed. Certificates and CRLs
are included in a package that uses signed-data, which is often
referred to as a "degenerate CMS", or as a "certs-only" [RFC5751]
[RFC6268] or "crls-only" message (see Section 4.2), but no
signature or content is present -- hence the names "certs-only"
and "crls-only".
Note: As per [RFC7030], the creator may or may not be the EST
server or the EST CA.
1.2. Authentication and Authorization
Client and server authentication as well as client and server
authorization are as defined in [RFC7030]. The requirements for each
are discussed in the "request" and "response" sections (e.g.,
Sections 3.1 and 3.2 of this document) of each of the PCs defined
herein.
The requirements for the TA databases are as specified in [RFC7030]
as well.
1.3. TLS Cipher Suites
TLS (Transport Layer Security) cipher suites and issues associated
with them are as defined in [RFC7030].
1.4. URI Configuration
As specified in Section 3.1 of [RFC7030], the client is configured
with sufficient information to form the server URI [RFC3986]. Like
EST, this configuration mechanism is beyond the scope of this
document.
Turner Standards Track [Page 7]
RFC 8295 EST Extensions January 2018
1.5. Message Types
This document uses existing media types for the messages as specified
by "Internet X.509 Public Key Infrastructure Operational Protocols:
FTP and HTTP" [RFC2585], "The application/pkcs10 Media Type"
[RFC5967], and "Certificate Management over CMS (CMC)" [RFC5272].
For consistency with [RFC5273], each distinct EST message type uses
an HTTP Content-Type header with a specific media type.
The EST messages, their corresponding media types for each operation,
and the sections that provide request and response information are as
follows:
+-------------------+---------------------------------+---------------+
| Message type | Request media type | Request |
| | Response media type(s) | Response |
| (per operation) | Source(s) of types | |
+===================+=================================+===============+
| Locate Available | N/A | Section 2.2 |
| Packages | application/xml or | Section 2.3 |
| | application/json | |
| | [RFC7303] [RFC8259] | |
| /pal | | |
+===================+=================================+===============+
| Distribute EE | N/A | Section 3.1 |
| Certificates | application/pkcs7-mime | Section 3.2 |
| | [RFC5751] | |
| /eecerts | | |
+===================+=================================+===============+
| Distribute CRLs | N/A | Section 4.1 |
| | application/pkcs7-mime | Section 4.2 |
| | [RFC5751] | |
| /crls | | |
+===================+=================================+===============+
| Symmetric Key | N/A | Section 5.1.1 |
| Distribution | application/cms | Section 5.1.2 |
| | [RFC7193] | |
| /symmetrickeys | | |
+===================+=================================+===============+
| Return Symmetric | application/cms | Section 5.2.1 |
| Key | N/A | Section 5.2.2 |
| Receipts/Errors | [RFC7193] | |
| | | |
| /symmetrickeys/ | | |
| return | | |
Turner Standards Track [Page 8]
RFC 8295 EST Extensions January 2018
+===================+=================================+===============+
| Firmware | N/A | Section 6.1.1 |
| Distribution | application/cms | Section 6.1.2 |
| | [RFC7193] | |
| /firmware | | |
+===================+=================================+===============+
| Return Firmware | application/cms | Section 6.2.1 |
| Receipts/Errors | N/A | Section 6.2.2 |
| | [RFC7193] | |
| /firmware/return | | |
+===================+=================================+===============+
| Trust Anchor | N/A | Section 7.1.1 |
| Management | application/ | Section 7.1.2 |
| | tamp-status-query | |
| | tamp-update | |
| | tamp-apex-update | |
| | tamp-community-update | |
| | tamp-sequence-adjust | |
| | [RFC5934] | |
| /tamp | | |
+===================+=================================+===============+
| Return TAMP | application/ | Section 7.2.1 |
| Responses/ | tamp-status-response | |
| Confirms/ | tamp-update-confirm | |
| Errors | tamp-apex-update-confirm | |
| | tamp-community-update-confirm | |
| | tamp-sequence-adjust-confirm | |
| | tamp-error | |
| | N/A | Section 7.2.2 |
| | [RFC5934] | |
| /tamp/return | | |
+===================+=================================+===============+
| Server-Side Key | application/pkcs10 with | Section 8.1 |
| Generation | content type attribute | |
| | CSR* | |
| | application/cms | Section 8.1 |
| /serverkeygen | [RFC5967] [RFC7193] [RFC7030] | |
Turner Standards Track [Page 9]
RFC 8295 EST Extensions January 2018
+===================+=================================+===============+
| Return Asymmetric | application/cms | Section 8.2 |
| Key | N/A | Section 8.2 |
| Receipts/Errors | [RFC7193] | |
| | | |
| /serverkeygen/ | | |
| return | | |
+===================+=================================+===============+
| Server-Side Key | application/pkcs10 | Section 8.3.1 |
| Generation: | application/pkcs12 | Section 8.3.2 |
| PKCS #12 | [RFC5967] [RFC7193] [RFC7030] | |
| | | |
| /serverkeygen | | |
+===================+=================================+===============+
* Certificate Signing Request
1.6. Key Words
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. Locate Available Packages
The PAL (Package Availability List) is either an XML (Extensible
Markup Language) [XML] or JSON (JavaScript Object Notation) [RFC8259]
object available through the /pal PC, which furnishes the following
information to clients:
o Advertisements for available packages that can be retrieved from
the server;
o Notifications to begin public key certificate management or to
return package receipts and errors; and
o Advertisement for another PAL.
After being configured (see Section 1.4), the client can use this
service to retrieve its PAL (see Section 2.1), which, if properly
constructed (see Section 2.3), allows the client to determine some or
all of the security-related packages needed for bootstrapping. Each
PAL entry refers to other PCs (as defined in this document and in
[RFC7030]) that clients use to a) retrieve packages that are
available to them (e.g., CA certificates, firmware, trust anchors,
symmetric keys, and asymmetric keys) or b) receive notifications to
Turner Standards Track [Page 10]
RFC 8295 EST Extensions January 2018
initiate public key certificate enrollment. PAL entries can also be
used to notify clients that they are to return receipts or errors for
certain packages (see Section 2.1.1). Placing these entries after
entries that clients used to retrieve the packages is the same as
requesting receipts in the originally distributed package. Figure 1
provides a ladder diagram for the /pal PC protocol flow. Appendix A
provides a detailed example.
| |
Client | Establish TLS | Server
| Session |
|<-------------------->|
| |
| Request PAL |
| (HTTP GET Request) |
|--------------------->|
|<---------------------|
| Deliver PAL |
| (HTTP GET Response) |
| |
| Request package by |
| specified URI |
| (HTTP GET or POST |
| Request) |
|--------------------->|
|<---------------------|
| Deliver requested |
| CMS package product |
| (HTTP GET or POST |
| Response) |
| |
Repeat as necessary.
Figure 1: /pal Message Sequence
PALs are designed to support an arbitrary number of entries, but for
PALs that need to be divided for any reason, there is a special PAL
entry type that constitutes a collection of "PAL package types".
Package type 0001 ("Additional PAL value present") refers to another
PAL. See Sections 2.1 and 2.1.1. If present, the 0001 package type
is always last because other entries after it are ignored. Also, in
order to avoid needlessly dereferencing URIs, the 0001 package type
cannot be the only PAL entry. In addition to using the PAL during
bootstrapping, clients can be configured to periodically poll the
server to determine if updated packages are available for them. Note
that the mechanism to configure how often clients poll the server is
beyond the scope of this document. However, there are some services
Turner Standards Track [Page 11]
RFC 8295 EST Extensions January 2018
that support indicating when a client should retry its request (e.g.,
simple enrollment and re-enroll responses include the Retry-After
header [RFC7030]).
As noted earlier, the PAL supports two variants: XML and JSON.
Clients include the HTTP Accept header [RFC7231] when they connect to
the server to indicate whether they support XML or JSON.
The client MUST authenticate the server as specified in [RFC7030],
and the client MUST check the server's authorization as specified in
[RFC7030].
The server MUST authenticate the client as specified in [RFC7030],
and the server MUST check the client's authorization as specified in
[RFC7030].
PAL support is OPTIONAL. It is shown in figures throughout this
document, but clients need not support the PAL to access services
offered by the server.
2.1. PAL Format
Each PAL is composed of zero or more entries. Each entry is composed
of four fields -- type, date, size, and info -- whose semantics
follow:
Note: Both XML elements and JSON values are described below. XML
elements are enclosed in angle brackets (<>), and JSON values are
enclosed in single quotes (''). When described together, they are
enclosed in square brackets ([]) separated by a vertical bar (|).
o [<type> | 'type'] uniquely identifies each package that a client
may retrieve from the server with a 4-digit string.
[<type> | 'type'] MUST be present. The PAL package types are
defined in Section 2.1.1.
o [<date> | 'date'] indicates one of the following:
* The date and time that the client last successfully downloaded
the identified package from the server. [<date> | 'date'] MUST
be represented as Generalized Time with 20 characters:
YYYY-MM-DDTHH:MM:SSZ; <date> matches the dateTime production in
"canonical representation" [XMLSCHEMA]; 'date' is a string.
Implementations SHOULD NOT rely on time resolution finer than
seconds and MUST NOT generate time instants that specify
leap seconds.
Turner Standards Track [Page 12]
RFC 8295 EST Extensions January 2018
* The omission of [<date> | 'date'] indicates the following:
- There is no indication that the client has successfully
downloaded the identified package, or
- The PAL entry corresponds to a pointer to the next PAL, or
the server is requesting a package from the client (e.g.,
certification request, receipt, error).
o [<size> | 'size'] indicates the size in bytes of the package;
<size> is a nonNegativeInteger, and 'size' is a number. A package
size of zero (i.e., "0" without the quotes) indicates that the
client needs to begin a transaction, return an error, or return a
receipt. [<size> | 'size'] MUST be present.
o [<info> | 'info'] provides an SKI (Subject Key Identifier), a DN
(Distinguished Name), an Issuer and Serial Number tuple, or a URI,
i.e., it is a choice between these four items, all of which are
defined in [RFC5280]. When a URI [RFC3986] is included,
[<uri> | 'uri'] indicates the location where the identified
package can be retrieved. When a DN, an SKI, or an Issuer Name
and Serial Number tuple is included, it points to a certificate
that is the subject of the notification (i.e., the certificate to
be rekeyed or renewed); [<dn> | 'dn'] is encoded as a string with
the format defined in [RFC4514]; <ski> is a hexBinary, and 'ski'
is a string of hex digits (i.e., 0-9, a-f, and A-F);
[<iasn> | 'iasn'] includes both [<issuer> | 'issuer'] and
[<serial> | 'serial'] as a complexType in XML and an object in
JSON. [<issuer> | 'issuer'] is a DN encoded as a string with the
format defined in [RFC4514]; <serial> is a positiveInteger, and
'serial' is a number. [<info> | 'info'] MUST be present, and
[<info> | 'info'] MUST include exactly one [<dn> | 'dn'],
[<ski> | 'ski'], [<iasn> | 'iasn'], or [<uri> | 'uri'].
Clients are often limited by the size of objects they can consume;
the PAL is not immune to these limitations. As opposed to picking a
limit for all clients, a special package type (0001) is defined (see
Section 2.1.1) to indicate that another PAL is available. Servers
can use this value to limit the size of the PALs provided to clients.
The mechanism for servers to know client PAL size limits is beyond
the scope of this document; one possible solution is through
provisioned information.
Turner Standards Track [Page 13]
RFC 8295 EST Extensions January 2018
2.1.1. PAL Package Types
Table 1 lists the PAL package types that are defined by this
document:
Package Package Description
Number
-------- ---------------------------------------------------
0000 Reserved
0001 Additional PAL value present
0002 X.509 CA certificate
0003 X.509 EE certificate
0004 X.509 ARL
0005 X.509 CRL
0006 Start DS certificate enrollment with CSR attribute
0007 Start DS certificate enrollment
0008 DS certificate enrollment (success)
0009 DS certificate enrollment (failure)
0010 Start DS certificate re-enrollment
0011 DS certificate re-enrollment (success)
0012 DS certificate re-enrollment (failure)
0013 Start KE certificate enrollment with CSR attribute
0014 Start KE certificate enrollment
0015 KE certificate enrollment (success)
0016 KE certificate enrollment (failure)
0017 Start KE certificate re-enrollment
0018 KE certificate re-enrollment (success)
0019 KE certificate re-enrollment (failure)
0020 Asymmetric Key Package (PKCS #8)
0021 Asymmetric Key Package (CMS)
0022 Asymmetric Key Package (PKCS #12)
0023 Asymmetric Key Package Receipt or Error
0024 Symmetric Key Package
0025 Symmetric Key Package Receipt or Error
0026 Firmware Package
0027 Firmware Package Receipt or Error
0028 TAMP Status Query
0029 TAMP Status Query Response or Error
0030 Trust Anchor Update
0031 Trust Anchor Update Confirm or Error
0032 Apex Trust Anchor Update
0033 Apex Trust Anchor Update Confirm or Error
0034 Community Update
0035 Community Update Confirm or Error
0036 Sequence Number Adjust
0037 Sequence Number Adjust Confirm or Error
Table 1: PAL Package Types
Turner Standards Track [Page 14]
RFC 8295 EST Extensions January 2018
Note: "CSR" is Certificate Signing Request, "DS" is Digital
Signature, and "KE" is Key Establishment.
PAL package types are essentially hints about the type of package the
client is about to retrieve or is asked to return. Savvy clients can
parse the packages to determine what has been provided, but in some
instances it is better to know before retrieving the package. The
hint provided here does not obviate the need for clients to check the
type of package provided before they store it, possibly in specially
allocated locations (i.e., some clients might store Root ARLs
separately from intermediate CRLs). For packages provided by the
client, the server is asking the client to provide an enrollment
package, receipt, response, confirm, or error.
The PAL package types have the following meanings:
Note: The semantics behind Codes 0002 and 0006-0021 are defined in
[RFC7030].
0000 Reserved: Reserved for future use.
0001 Additional PAL value present: Indicates that this PAL entry
refers to another PAL by referring to another /pal URI, which is
defined in this section. This PAL package type limits the size
of PALs to a more manageable size for clients. If this PAL
package type appears, it MUST be the last entry in the PAL.
Additionally, in order to avoid needlessly dereferencing URIs,
this PAL package type MUST NOT be the only entry.
0002 X.509 CA certificate: Indicates that one or more CA certificates
[RFC5280] are available for the client by pointing to a
/cacerts URI, which is defined in [RFC7030].
0003 X.509 EE certificate: Indicates that one or more EE certificates
[RFC5280] are available for the client by pointing to an
/eecerts URI, which is defined in Section 3.
0004 X.509 ARL: Indicates that one or more ARLs (Authority Revocation
Lists) [RFC5280] are available for the client by pointing to a
/crls URI, which is defined in Section 4.
0005 X.509 CRL: Indicates that one or more CRLs (Certificate
Revocation Lists) [RFC5280] are available for the client by
pointing to a /crls URI, which is defined in Section 4.
Turner Standards Track [Page 15]
RFC 8295 EST Extensions January 2018
Note: See Section 9 for additional information about PAL and
certificate enrollment interaction. See Appendix B for additional
informative information.
0006 Start DS certificate enrollment with CSR: Indicates that the
client needs to begin enrolling its DS certificate (i.e., any
certificate for which the key usage extension will have a
digital signature set), using a template provided by the server
with a CSR (Certificate Signing Request) attribute (see
Appendix B). The PAL entry points to a /csrattrs URI, which is
defined in [RFC7030].
0007 Start DS certificate enrollment: Indicates that the client needs
to begin enrolling its DS certificate. The PAL entry points to
a /simpleenroll URI, which is defined in [RFC7030].
0008 DS certificate enrollment (success): Indicates that the client
needs to retrieve a successful certification response. The PAL
entry points to a /simpleenroll or a /fullcmc URI, both of which
are defined in [RFC7030].
0009 DS certificate enrollment (failure): Indicates that the client
needs to retrieve a failed certification response for a DS
certificate. This PAL entry points to a /simpleenroll or a
/fullcmc URI.
0010 Start DS certificate re-enrollment: Indicates that the client
needs to rekey or renew a DS certificate. The PAL entry points
to a /simplereenroll or a /fullcmc URI.
0011 DS certificate re-enrollment (success): See PAL package
type 0008.
0012 DS certificate re-enrollment (failure): See PAL package
type 0009.
Note: The KE (Key Establishment) responses that follow use the same
URIs as DS certificates, except that the certificates' key usage
extension is set to only key agreement or key transport.
0013 Start KE certificate enrollment with CSR: See PAL package
type 0006.
0014 Start KE certificate enrollment: See PAL package type 0007.
0015 KE certificate enrollment (success): See PAL package type 0008.
0016 KE certificate enrollment (failure): See PAL package type 0009.
Turner Standards Track [Page 16]
RFC 8295 EST Extensions January 2018
0017 Start KE certificate re-enrollment: See PAL package type 0010.
0018 KE certificate re-enrollment (success): See PAL package
type 0008.
0019 KE certificate re-enrollment (failure): See PAL package
type 0009.
Note: The variations in the asymmetric key packages are due to the
number of CMS content types that can be used to protect the
asymmetric key; the syntax for the asymmetric key is the same, but
additional ASN.1 is needed to include it in a signed-data (i.e., the
ASN.1 needs to be a CMS content type and not the private key info
type). See Section 8 of this document for additional information.
0020 Asymmetric Key Package (PKCS #8): Indicates that an asymmetric
key generated by the server is available for the client; the
package is an asymmetric key without additional encryption as
specified in Section 4.4.2 of [RFC7030]. The PAL entry points
to a /serverkeygen or a /fullcmc URI, which are defined in
[RFC7030].
0021 Asymmetric Key Package (CMS): See PAL package type 0020 (the
difference being that the package available is an asymmetric key
package [RFC5958] that is signed and encapsulated in a
signed-data content type, as specified in Section 4.4.2 of
[RFC7030]). Also, see Section 8.1 of this document.
0022 Asymmetric Key Package (PKCS #12): See PAL package type 0020
(the difference being that the package available is the PKCS #12
[RFC7292] content type). See Section 8.3 of this document.
0023 Asymmetric Key Package Receipt or Error: Indicates that the
server wants the client to return a key package receipt or error
[RFC7191] to the /serverkeygen/return URI, which is defined in
Section 8.
0024 Symmetric Key Package: Indicates that a symmetric key package
[RFC6031] is available for the client by pointing to a
/symmetrickeys URI, which is defined in Section 5.
0025 Symmetric Key Package Receipt or Error: Indicates that the
server wants the client to return a key package receipt or error
[RFC7191] to the /symmetrickeys/return URI, which is defined in
Section 5.
Turner Standards Track [Page 17]
RFC 8295 EST Extensions January 2018
0026 Firmware Package: Indicates that a firmware package [RFC4108] is
available for the client, using the /firmware URI, which is
defined in Section 6.
0027 Firmware Package Receipt or Error: Indicates that the server
wants the client to return a firmware package load receipt or
error [RFC4108] to the /firmware/return URI, which is defined in
Section 6.
Note: The /tamp and tamp/return URIs are defined in Section 7.
0028 TAMP Status Query: Indicates that a TAMP Status Query package
[RFC5934] is available for the client, using the /tamp URI.
0029 TAMP Status Query Response or Error: Indicates that the server
wants the client to return a TAMP Status Query Response or Error
[RFC5934] to the /tamp/return URI.
0030 Trust Anchor Update: Indicates that a Trust Anchor Update
package [RFC5934] is available for the client, using the /tamp
URI.
0031 Trust Anchor Update Confirm or Error: Indicates that the server
wants the client to return a Trust Anchor Update Confirm or
Error [RFC5934] to the /tamp/return URI.
0032 Apex Trust Anchor Update: Indicates that an Apex Trust Anchor
Update package [RFC5934] is available for the client, using the
/tamp URI.
0033 Apex Trust Anchor Update Confirm or Error: Indicates that the
server wants the client to return an Apex Trust Anchor Update
Confirm or Error [RFC5934] to the /tamp/return URI.
0034 Community Update: Indicates that a Community Update package
[RFC5934] is available for the client, using the /tamp URI.
0035 Community Update Confirm or Error: Indicates that the server
wants the client to return a Community Update Confirm or Error
[RFC5934] to the /tamp/return URI.
0036 Sequence Number Adjust: Indicates that a Sequence Number Adjust
package [RFC5934] is available for the client, using the /tamp
URI.
0037 Sequence Number Adjust Confirm or Error: Indicates that the
server wants the client to return a Sequence Number Adjust
Confirm or Error [RFC5934] to the /tamp/return URI.
Turner Standards Track [Page 18]
RFC 8295 EST Extensions January 2018
2.1.2. PAL XML Schema
The namespace is specified in Section 11.1. The fields in the schema
were discussed earlier, in Sections 2.1 and 2.1.1.
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="https://www.w3.org/2001/XMLSchema"
xmlns:pal="urn:ietf:params:xml:ns:pal"
targetNamespace="urn:ietf:params:xml:ns:pal"
elementFormDefault="qualified" attributeFormDefault="unqualified"
version="1.0">
<xsd:annotation>
<xsd:documentation>
This schema defines the types and elements needed
to retrieve client packages from the server or for the
client to post packages to the server.
</xsd:documentation>
</xsd:annotation>
<!-- ===== Element Declarations ===== -->
<xsd:element name="pal" type="pal:PAL" />
<!-- ===== Complex Data Element Type Definitions ===== -->
<xsd:complexType name="PAL">
<xsd:annotation>
<xsd:documentation>
This type defines the Package Availability List (PAL).
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="message" type="pal:PALEntry"
minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:documentation>
This item contains information about the package
and a link that the client uses to download or post
the package.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
Turner Standards Track [Page 19]
RFC 8295 EST Extensions January 2018
<xsd:complexType name="PALEntry">
<xsd:annotation>
<xsd:documentation>
This type defines a product in the PAL.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="type" type="pal:PackageType" />
<xsd:element name="date" type="pal:GeneralizedTimeType"
minOccurs="0" />
<xsd:element name="size" type="xsd:nonNegativeInteger">
<xsd:annotation>
<xsd:documentation>
This item indicates the package's size.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="info" type="pal:PackageInfoType" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="PackageInfoType">
<xsd:annotation>
<xsd:documentation>
This type allows a choice of X.500 Distinguished Name,
Subject Key Identifier, Issuer and Serial Number tuple,
or URI.
</xsd:documentation>
</xsd:annotation>
<xsd:choice>
<xsd:element name="dn" type="pal:DistinguishedName" />
<xsd:element name="ski" type="pal:SubjectKeyIdentifier" />
<xsd:element name="iasn" type="pal:IssuerAndSerialNumber" />
<xsd:element name="uri" type="pal:ThisURI" />
</xsd:choice>
</xsd:complexType>
Turner Standards Track [Page 20]
RFC 8295 EST Extensions January 2018
<xsd:complexType name="IssuerAndSerialNumber">
<xsd:annotation>
<xsd:documentation>
This type holds the issuer Distinguished Name and
serial number of a referenced certificate.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="issuer" type="pal:DistinguishedName" />
<xsd:element name="serial" type="xsd:positiveInteger" />
</xsd:sequence>
</xsd:complexType>
<!-- ===== Simple Data Element Type Definitions ===== -->
<xsd:simpleType name="PackageType">
<xsd:annotation>
<xsd:documentation>
This type identifies each package that a client may retrieve
from the server with a 4-digit string.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:string">
<xsd:pattern value="d{4}" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="GeneralizedTimeType">
<xsd:annotation>
<xsd:documentation>
This type indicates the date and time (YYYY-MM-DDTHH:MM:SSZ)
that the client last acknowledged successful receipt of the
package; it is absent if a) there is no indication that the
package has been downloaded or b) the PAL entry corresponds
to a pointer to the next PAL.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:dateTime">
<xsd:pattern value=".*:d{2}Z" />
<xsd:minInclusive value="2013-05-23T00:00:00Z" />
</xsd:restriction>
</xsd:simpleType>
Turner Standards Track [Page 21]
RFC 8295 EST Extensions January 2018
<xsd:simpleType name="DistinguishedName">
<xsd:annotation>
<xsd:documentation>
This type holds an X.500 Distinguished Name.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1024" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="SubjectKeyIdentifier">
<xsd:annotation>
<xsd:documentation>
This type holds a hex string representing the value of a
certificate's SubjectKeyIdentifier.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:hexBinary">
<xsd:maxLength value="1024" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="ThisURI">
<xsd:annotation>
<xsd:documentation>
This type holds a URI but is length limited.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:anyURI">
<xsd:maxLength value="1024" />
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>
Turner Standards Track [Page 22]
RFC 8295 EST Extensions January 2018
2.1.3. PAL JSON Object
The following is an example PAL JSON object. The fields in the
object were discussed earlier, in Sections 2.1 and 2.1.1.
[
{
"type": "0003",
"date": "2016-12-29T09:28:00Z",
"size": 1234,
"info":
{
"uri": "https://www.example.com/.well-known/est/eecerts/1234"
}
},
{
"type": "0006",
"date": "2016-12-29T09:28:00Z",
"size": 1234,
"info":
{
"iasn":
{
"issuer": "CN=Sean Turner,O=sn3rd,C=US",
"serial": 0
}
}
}
]
2.2. Request PAL
Clients request their PAL with an HTTP GET [RFC7231], using an
operation path of "/pal". Clients indicate whether they would prefer
XML or JSON by including the HTTP Accept header [RFC7231] with either
"application/xml" or "application/json", respectively.
Turner Standards Track [Page 23]
RFC 8295 EST Extensions January 2018
2.3. Provide PAL
If the server has a PAL for the client, the server response MUST
contain an HTTP 200 response code with a Content-Type of
"application/xml" [RFC7303] or "application/json" [RFC8259].
When the server constructs a PAL, an order of precedence for PAL
offerings is based on the following rationale:
o /cacerts and /crls packages are the most important because they
support validation decisions on certificates used to sign and
encrypt other listed PAL items.
o /csrattrs are the next in importance, since they provide
information that the server would like the client to include in
its certificate enrollment request.
o /simpleenroll, /simplereenroll, and /fullcmc packages are next in
importance, since they can impact a certificate used by the client
to sign CMS content or a certificate to establish keys for
encrypting content exchanged with the client.
* A client engaged in certificate management SHOULD accept and
process CA-provided transactions as soon as possible to avoid
undue delays that might lead to protocol failure.
o /symmetrickeys, /firmware, /tamp, and /eecerts packages containing
keys and other types of products are last. Precedence SHOULD be
given to packages that the client has not previously downloaded.
The items listed in a PAL may not identify all of the packages
available for a device. This can be for any of the following
reasons:
* The server may temporarily withhold some outstanding PAL items
to simplify client processing.
* If a CA has more than one certificate ready for the client, the
server will provide a notice for one at a time. Pending
notices will be serviced in order, according to the date when
the certificate will be used (earliest date first).
When rejecting a request, the server specifies either an HTTP 4xx
error or an HTTP 5xx error.
All other return codes are handled as specified in Section 4.2.3 of
[RFC7030] (i.e., 202 handling and all other HTTP response codes).
Turner Standards Track [Page 24]
RFC 8295 EST Extensions January 2018
3. Distribute EE Certificates
Numerous mechanisms exist for clients to query repositories for
certificates. The service provided by the /eecerts PC is different
in that it is not a general-purpose query for client certificates;
instead, it allows the server to provide peer certificates to a
client that the server knows through an out-of-band mechanism that
the client will be communicating with. For example, a router being
provisioned that connects to two peers can be provisioned with not
only its certificate but also with the peers' certificates.
The server need not authenticate or authorize the client for
distributing an EE certificate, because the package contents are
already signed by a CA (i.e., the certificate(s) in a certs-only
message has already been signed by a CA). The message flow is
similar to Figure 1, except that the connection need not be HTTPS:
| |
Client | Establish TLS | Server
| Session |
|<-------------------->|
| |
| Request PAL |
| (HTTP GET Request) |
|--------------------->|
|<---------------------|
| Deliver PAL |
| (HTTP GET Response) |
| |
| Request EE Cert(s) |
| (HTTP GET Request) |
|--------------------->|
|<---------------------|
| Deliver EE Cert(s) |
| (HTTP GET Response) |
| |
Figure 2: /eecerts Message Sequence
3.1. EE Certificate Request
Clients request EE certificates with an HTTP GET [RFC7231], using an
operation path of "/eecerts".
Turner Standards Track [Page 25]
RFC 8295 EST Extensions January 2018
3.2. EE Certificate Response
The response and processing of the returned error codes are identical
to what is described in Section 4.1.3 of [RFC7030], except that the
certificate provided is not the one issued to the client; instead,
one or more client's peer certificates are returned in the certs-only
message.
Clients MUST reject EE certificates that do not validate to an
authorized TA.
4. Distribute CRLs and ARLs
CRLs (and ARLs) are needed in many instances to perform certificate
path validation [RFC5280]. They can be obtained from repositories if
their location is provided in the certificate. However, the client
needs to parse the certificate and perform an additional round trip
to retrieve them. Providing CRLs during bootstrapping obviates the
need for the client to parse the certificate and aids those clients
who might be unable to retrieve the CRL. Clients are free to obtain
CRLs on which they rely from sources other than the server (e.g., a
local directory). The /crls PC allows servers to distribute CRLs at
the same time that clients retrieve their certificate(s) and CA
certificate(s) as well as peer certificates.
The server need not authenticate or authorize the client for
distributing a CRL, because the package contents are already signed
by a CA (i.e., the CRLs in a crls-only message have already been
signed by a CA). The message flow is as depicted in Figure 2 but
with "CRL(s)" instead of "EE Cert(s)".
4.1. CRL Request
Clients request CRLs with an HTTP GET [RFC7231], using an operation
path of "/crls".
4.2. CRL Response
The response, and the processing of that response, are identical to
what is described in Section 4.1.3 of [RFC7030], except that instead
of providing the issued certificate one of more CRLs are returned in
the crls-only message.
Clients MUST reject CRLs that do not validate to an authorized TA.
Turner Standards Track [Page 26]
RFC 8295 EST Extensions January 2018
5. Symmetric Keys, Receipts, and Errors
In addition to public keys, clients often need one or more symmetric
keys to communicate with their peers. The /symmetrickeys PC allows
the server to distribute symmetric keys to clients.
Distribution of keys does not always work as planned, and clients
need a way to inform the server that something has gone wrong; they
also need a way to inform the server, if asked, that the distribution
process has successfully completed. The /symmetrickeys/return PC
allows clients to provide errors and receipts.
Clients MUST authenticate the server, and clients MUST check the
server's authorization.
The server MUST authenticate clients, and the server MUST check the
client's authorization.
HTTP GET [RFC7231] is used when the server provides the key to the
client (see Section 5.1), using the /symmetrickeys PC; HTTP POST
[RFC7231] is used when the client provides a receipt (see
Section 5.2) or an error (see Section 5.2) to the server with the
/symmetrickeys/return PC.
5.1. Symmetric Keys
Servers use /symmetrickeys to provide symmetric keys to clients; the
symmetric key package is defined in [RFC6031].
As with the /serverkeygen PC defined in [RFC7030], the default method
for distributing the symmetric key uses the encryption mode of the
negotiated TLS cipher suite. Keys are not protected by preferred
key-wrapping methods such as AES Key Wrap [RFC3394] or AES Key Wrap
with Padding [RFC5649], because encryption of the symmetric key
beyond that provided by TLS is OPTIONAL. Therefore, the cipher suite
used to return the symmetric key MUST offer cryptographic strength
that is commensurate with the symmetric key being delivered to the
client. The cipher suite used MUST NOT have the NULL encryption
algorithm, as this will disclose the unprotected symmetric key. It
is strongly RECOMMENDED that servers always return encrypted
symmetric keys.
Turner Standards Track [Page 27]
RFC 8295 EST Extensions January 2018
The following depicts the protocol flow:
| |
Client | Establish TLS | Server
| Session |
|<--------------------->|
| |
| Request PAL |
| (HTTP GET Request) |
|---------------------->|
|<----------------------|
| Deliver PAL |
| (HTTP GET Response) |
| |
| Req Symmetric Key |
| (HTTP GET Request) |
|---------------------->|
|<----------------------|
| Deliver Symmetric Key |
| (HTTP GET Response) |
| |
Figure 3: /symmetrickeys Message Sequence
5.1.1. Distribute Symmetric Keys
Clients request the symmetric key from the server with an HTTP GET
[RFC7231], using an operation path of "/symmetrickeys".
5.1.2. Symmetric Key Response
If the request is successful, the server response MUST have an
HTTP 200 response code with a Content-Type of "application/cms"
[RFC7193]. The optional application/cms encapsulatingContent and
innerContent parameters SHOULD be included with the Content-Type to
indicate the protection afforded to the returned symmetric key. The
returned content varies:
o If additional encryption is not being employed, the content
associated with application/cms is a DER-encoded [X.690] symmetric
key package.
o If additional encryption is employed, the content associated with
application/cms is DER-encoded enveloped-data that encapsulates a
signed-data that further encapsulates a symmetric key package.
Turner Standards Track [Page 28]
RFC 8295 EST Extensions January 2018
o If additional encryption and origin authentication are employed,
the content associated with application/cms is a DER-encoded
signed-data that encapsulates an enveloped-data that encapsulates
a signed-data that further encapsulates a symmetric key package.
o If CCC (CMS Content Constraints) [RFC6010] is supported, the
content associated with application/cms is a DER-encoded encrypted
key package [RFC6032]. The encrypted key package provides three
choices to encapsulate keys: EncryptedData, EnvelopedData, and
AuthEnvelopedData. Prior to employing one of these three
encryption choices, the key package can be encapsulated in a
signed-data.
How the server knows whether the client supports the encrypted key
package is beyond the scope of this document.
When rejecting a request, the server specifies either an HTTP 4xx
error or an HTTP 5xx error.
If a symmetric key package (which might be signed) or an encrypted
key package (which might be signed before and after encryption) is
digitally signed, the client MUST reject it if the digital signature
does not validate back to an authorized TA.
Note: Absent a policy on the client side requiring a signature, a
malicious EST server can simply strip the signature, thus bypassing
that check. In that case, this requirement is merely a sanity check,
serving to detect mis-signed packages or misconfigured clients.
[RFC3370], [RFC5753], [RFC5754], [RFC6033], [RFC6160], and [RFC6161]
provide algorithm details for use when protecting the symmetric key
package and encrypted key package.
5.2. Symmetric Key Receipts and Errors
Clients use /symmetrickeys/return to provide symmetric key package
receipts; the key package receipt content type is defined in
[RFC7191]. Clients can be configured to automatically return
receipts after processing a symmetric key package, return receipts
based on processing of the key-package-identifier-and-receipt-request
attribute [RFC7191], or return receipts when prompted by a PAL entry.
Servers can indicate that clients return a receipt by including the
key-package-identifier-and-receipt-request attribute in a signed-data
as a signed attribute. However, this attribute only appears when
additional encryption is employed (see Section 5.1.2).
Turner Standards Track [Page 29]
RFC 8295 EST Extensions January 2018
Clients also use /symmetrickeys/return to return symmetric key
package errors; the key package error content type is defined in
[RFC7191]. Clients can be configured to automatically return errors
after processing a symmetric key package or based on a PAL entry.
The following depicts the protocol flow:
| |
Client | Establish TLS | Server
| Session |
|<-------------------->|
| |
| Request PAL |
| (HTTP GET Request) |
|--------------------->|
|<---------------------|
| Deliver PAL |
| (HTTP GET Response) |
| |
| Return Receipt/Error |
| (HTTP POST Request) |
|--------------------->|
|<---------------------|
| (HTTP POST Response) |
| status code only |
| no content |
| |
Figure 4: /symmetrickeys/return Message Sequence
5.2.1. Provide Symmetric Key Receipt or Error
Clients return symmetric key receipts and errors to the server with
an HTTP POST [RFC7231], using an operation path of
"/symmetrickeys/return". The returned content varies:
o The key package receipt is digitally signed [RFC7191]; the
Content-Type is "application/cms" [RFC7193]; and the associated
content is signed-data, which encapsulates a key package receipt.
o If the key package error is not digitally signed, the Content-Type
is "application/cms" and the associated content is a key package
error. If the key package error is digitally signed, the
Content-Type is "application/cms" and the associated content is
signed-data, which encapsulates a key package error.
Turner Standards Track [Page 30]
RFC 8295 EST Extensions January 2018
The optional application/cms encapsulatingContent and innerContent
parameters SHOULD be included with the Content-Type to indicate the
protection afforded to the receipt or error.
[RFC3370], [RFC5753], [RFC5754], and [RFC7192] provide algorithm
details for use when protecting the key package receipt or key
package error.
5.2.2. Symmetric Key Receipt or Error Response
If the client successfully provides a receipt or error, the server
response has an HTTP 204 response code (i.e., no content is
returned).
When rejecting a request, the server specifies either an HTTP 4xx
error or an HTTP 5xx error.
If a key package receipt or key package error is digitally signed,
the server MUST reject it if the digital signature does not validate
back to an authorized TA.
6. Firmware, Receipts, and Errors
Servers can distribute object code for cryptographic algorithms and
software with the firmware package [RFC4108].
Clients MUST authenticate the server, and clients MUST check the
server's authorization.
The server MUST authenticate the client, and the server MUST check
the client's authorization.
The /firmware PC uses an HTTP GET [RFC7231], and the /firmware/return
PC uses an HTTP POST [RFC7231]. GET is used when the client
retrieves firmware from the server (see Section 6.1); POST is used
when the client provides a receipt (see Section 6.2) or an error (see
Section 6.2).
6.1. Firmware
The /firmware URI is used by servers to provide firmware packages to
clients.
The message flow is as depicted in Figure 3 modulo replacing
"Symmetric Key" with "Firmware Package".
Turner Standards Track [Page 31]
RFC 8295 EST Extensions January 2018
6.1.1. Distribute Firmware
Clients request firmware from the server with an HTTP GET [RFC7231],
using an operation path of "/firmware".
6.1.2. Firmware Response
If the request is successful, the server response MUST have an
HTTP 200 response code with a Content-Type of "application/cms"
[RFC7193]. The optional encapsulatingContent and innerContent
parameters SHOULD be included with the Content-Type to indicate the
protection afforded to the returned firmware. The returned content
varies:
o If the firmware is unprotected, then the Content-Type is
"application/cms" and the content is the DER-encoded [X.690]
firmware package.
o If the firmware is compressed, then the Content-Type is
"application/cms" and the content is the DER-encoded [X.690]
compressed data that encapsulates the firmware package.
o If the firmware is encrypted, then the Content-Type is
"application/cms" and the content is the DER-encoded [X.690]
encrypted-data that encapsulates the firmware package (which might
be compressed prior to encryption).
o If the firmware is signed, then the Content-Type is
"application/cms" and the content is the DER-encoded [X.690]
signed-data that encapsulates the firmware package (which might be
compressed, encrypted, or compressed and then encrypted prior to
signature).
How the server knows whether the client supports the unprotected,
signed, compressed, and/or encrypted firmware package is beyond the
scope of this document.
When rejecting a request, the server specifies either an HTTP 4xx
error or an HTTP 5xx error.
If a firmware package is digitally signed, the client MUST reject it
if the digital signature does not validate back to an authorized TA.
[RFC3370], [RFC5753], and [RFC5754] provide algorithm details for use
when protecting the firmware package.
Turner Standards Track [Page 32]
RFC 8295 EST Extensions January 2018
6.2. Firmware Receipts and Errors
Clients use the /firmware/return PC to provide firmware package load
receipts and errors [RFC4108]. Clients can be configured to
automatically return receipts and errors after processing a firmware
package or based on a PAL entry.
The message flow is as depicted in Figure 4 modulo the receipt or
error is for a firmware package.
6.2.1. Provide Firmware Receipt or Error
Clients return firmware receipts and errors to the server with an
HTTP POST [RFC7231], using an operation path of "/firmware/return".
The optional encapsulatingContent and innerContent parameters SHOULD
be included with the Content-Type to indicate the protection afforded
to the returned firmware receipt or error. The returned content
varies:
o If the firmware receipt is not digitally signed, the Content-Type
is "application/cms" [RFC7193] and the content is the DER-encoded
firmware receipt.
o If the firmware receipt is digitally signed, the Content-Type is
"application/cms" and the content is the DER-encoded signed-data
encapsulating the firmware receipt.
o If the firmware error is not digitally signed, the Content-Type is
"application/cms" and the content is the DER-encoded firmware
error.
o If the firmware error is digitally signed, the Content-Type is
"application/cms" and the content is the DER-encoded signed-data
encapsulating the firmware error.
[RFC3370], [RFC5753], and [RFC5754] provide algorithm details for use
when protecting the firmware receipt or firmware error.
6.2.2. Firmware Receipt or Error Response
If the request is successful, the server response MUST have an
HTTP 204 response code (i.e., no content is returned).
When rejecting a request, the server MUST specify either an HTTP 4xx
error or an HTTP 5xx error.
Turner Standards Track [Page 33]
RFC 8295 EST Extensions January 2018
If a firmware receipt or firmware error is digitally signed, the
server MUST reject it if the digital signature does not validate back
to an authorized TA.
7. Trust Anchor Management Protocol
Servers distribute TAMP packages to manage TAs in a client's trust
anchor databases; TAMP packages are defined in [RFC5934]. TAMP will
allow the flexibility for a device to load TAs while maintaining an
operational state. Unlike other systems that require new software
loads when new PKI Roots are authorized for use, TAMP allows for
automated management of roots for provisioning or replacement
as needed.
Clients MUST authenticate the server, and clients MUST check the
server's authorization.
The server MUST authenticate the client, and the server MUST check
the client's authorization.
The /tamp PC uses an HTTP GET [RFC7231], and the tamp/return PC uses
an HTTP POST [RFC7231]. GET is used when the server requests that
the client retrieve a TAMP package (see Section 7.1); POST is used
when the client provides a confirm (see Section 7.2), provides a
response (see Section 7.2), or provides an error (see Section 7.2)
for the TAMP package.
7.1. TAMP Status Query, Trust Anchor Update, Apex Trust Anchor Update,
Community Update, and Sequence Number Adjust
Clients use the /tamp PC to retrieve the TAMP packages: TAMP Status
Query, Trust Anchor Update, Apex Trust Anchor Update, Community
Update, and Sequence Number Adjust. Clients can be configured to
periodically poll the server for these packages or contact the server
based on a PAL entry.
The message flow is as depicted in Figure 3 modulo replacing
"Symmetric Key" with the appropriate TAMP message.
7.1.1. Request TAMP Packages
Clients request the TAMP packages from the server with an HTTP GET
[RFC7231], using an operation path of "/tamp".
Turner Standards Track [Page 34]
RFC 8295 EST Extensions January 2018
7.1.2. Return TAMP Packages
If the request is successful, the server response MUST have an
HTTP 200 response code and a Content-Type of:
o application/tamp-status-query for TAMP Status Query
o application/tamp-update for Trust Anchor Update
o application/tamp-apex-update for Apex Trust Anchor Update
o application/tamp-community-update for Community Update
o application/tamp-sequence-adjust for Sequence Number Adjust
As specified in [RFC5934], these content types are digitally signed
and clients must support validating the packages directly signed by
TAs. For this specification, clients MUST support validation with a
certificate and clients MUST reject it if the digital signature does
not validate back to an authorized TA.
[RFC3370], [RFC5753], and [RFC5754] provide algorithm details for use
when protecting the TAMP packages.
7.2. TAMP Responses, Confirms, and Errors
Clients return the TAMP Status Query Response, Trust Anchor Update
Confirm, Apex Trust Anchor Update Confirm, Community Update Confirm,
Sequence Number Adjust Confirm, and TAMP Error to servers, using the
/tamp/return PC. Clients can be configured to automatically return
responses, confirms, and errors after processing a TAMP package or
based on a PAL entry.
The message flow is as depicted in Figure 4 modulo replacing
"Receipt/Error" with the appropriate TAMP response, confirm, or
error.
Turner Standards Track [Page 35]
RFC 8295 EST Extensions January 2018
7.2.1. Provide TAMP Responses, Confirms, or Errors
Clients provide the TAMP responses, confirms, and errors to the
server with an HTTP POST, using an operation path of "/tamp/return".
The Content-Type is:
o application/tamp-status-response for TAMP Status Query Response
o application/tamp-update-confirm for Trust Anchor Update Confirm
o application/tamp-apex-update-confirm for Apex Trust Anchor Update
Confirm
o application/tamp-community-update-confirm for Community Update
Confirm
o application/tamp-sequence-adjust-confirm for Sequence Number
Adjust Confirm
o application/tamp-error for TAMP Error
As specified in [RFC5934], these content types should be signed. If
signed, a signed-data encapsulates the TAMP content.
[RFC3370], [RFC5753], and [RFC5754] provide algorithm details for use
when protecting the TAMP packages.
7.2.2. TAMP Responses, Confirms, and Error Responses
If the request is successful, the server response MUST have an
HTTP 204 response code (i.e., no content is returned).
When rejecting a request, the server MUST specify either an HTTP 4xx
error or an HTTP 5xx error.
If the package is digitally signed, the server MUST reject it if the
digital signature does not validate back to an authorized TA.
8. Asymmetric Keys, Receipts, and Errors
[RFC7030] defines the /serverkeygen PC to support server-side
generation of asymmetric keys. Keys are returned as either a) an
unprotected PKCS #8 when additional security beyond TLS is not
employed or b) a CMS asymmetric key package content type that is
encapsulated in a signed-data content type that is further
encapsulated in an enveloped-data content type when additional
security beyond TLS is requested.
Turner Standards Track [Page 36]
RFC 8295 EST Extensions January 2018
Some implementations prefer the use of other CMS content types to
encapsulate the asymmetric key package. This document extends the
content types that can be returned; see Section 8.1.
[RFC7191] defines content types for key package receipts and errors.
This document defines the /serverkeygen/return PC to add support for
returning receipts and errors for asymmetric key packages; see
Section 8.2.
PKCS #12 [RFC7292] (sometimes referred to as "PFX" (Personal
Information Exchange) or "P12") is often used to distribute
asymmetric private keys and associated certificates. This document
extends the /serverkeygen PC to allow servers to distribute
server-generated asymmetric private keys and the associated
certificate to clients using PKCS #12; see Section 8.3.
8.1. Asymmetric Key Encapsulation
CMS supports a number of content types to encapsulate other CMS
content types; [RFC7030] includes one such possibility. Note that
when only relying on TLS the returned key is not a CMS content type.
This document extends the CMS content types that can be returned.
If the client supports CCC [RFC6010], then the client can indicate
that it supports encapsulated asymmetric keys in the encrypted key
package [RFC5958] by including the encrypted key package's OID in a
content type attribute [RFC2985] in the CSR (Certificate Signing
Request) -- aka the certification request -- that it provides to the
server. If the client knows a priori that the server supports the
encrypted key package content type, then the client need not include
the content type attribute in the CSR.
In all instances defined herein, the Content-Type is
"application/cms" [RFC7193]. The optional encapsulatingContent and
innerContent parameters SHOULD be included with the Content-Type to
indicate the protection afforded to the returned asymmetric key
package.
If additional encryption and origin authentication are employed, the
content associated with application/cms is a DER-encoded signed-data
that encapsulates an enveloped-data that encapsulates a signed-data
that further encapsulates an asymmetric key package.
If CCC is supported and additional encryption is employed, the
content associated with application/cms is a DER-encoded encrypted
key package [RFC6032] content type that encapsulates a signed-data
that further encapsulates an asymmetric key package.
Turner Standards Track [Page 37]
RFC 8295 EST Extensions January 2018
If CCC is supported and if additional encryption and additional
origin authentication are employed, the content associated with
application/cms is a DER-encoded signed-data that encapsulates an
encrypted key package content type that encapsulates a signed-data
that further encapsulates an asymmetric key package.
The encrypted key package [RFC6032] provides three choices to
encapsulate keys: EncryptedData, EnvelopedData, and
AuthEnvelopedData, with EnvelopedData being the
mandatory-to-implement choice.
When rejecting a request, the server specifies either an HTTP 4xx
error or an HTTP 5xx error.
If an asymmetric key package or an encrypted key package is digitally
signed, the client MUST reject it if the digital signature does not
validate back to an authorized TA.
Note: Absent a policy on the client side requiring a signature, a
malicious EST server can simply strip the signature, thus bypassing
that check. In that case, this requirement is merely a sanity check,
serving to detect mis-signed packages or misconfigured clients.
[RFC3370], [RFC5753], [RFC5754], [RFC6033], [RFC6161], and [RFC6162]
provide algorithm details for use when protecting the asymmetric key
package and encrypted key package.
8.2. Asymmetric Key Package Receipts and Errors
Clients can be configured to automatically return receipts after
processing an asymmetric key package, return receipts based on
processing of the key-package-identifier-and-receipt-request
attribute [RFC7191], or return receipts when prompted by a PAL entry.
Servers can indicate that clients return a receipt by including the
key-package-identifier-and-receipt-request attribute [RFC7191] in a
signed-data as a signed attribute.
The protocol flow is identical to that depicted in Figure 4 modulo
the receipt or error is for asymmetric keys.
The server and client processing is as described in Sections 5.2.1
and 5.2.2 modulo the PC, which, for Asymmetric Key Packages, is
"/serverkeygen/return".
Turner Standards Track [Page 38]
RFC 8295 EST Extensions January 2018
8.3. PKCS #12
PFX is widely deployed and supports protecting keys in the same
fashion as CMS, but it does so differently.
8.3.1. Server-Side Key Generation Request
Similar to the other server-generated asymmetric keys provided
through the /serverkeygen PC:
o The certificate request is HTTPS POSTed and is the same format as
for the "/simpleenroll" and "/simplereenroll" path extensions with
the same content type.
o In all respects, the server SHOULD treat the CSR as it would any
enroll or re-enroll CSR; the only distinction here is that the
server MUST ignore the public key values and signature in the CSR.
These are included in the request only to allow the reuse of
existing codebases for generating and parsing such requests.
PBE (password-based encryption) shrouding of PKCS #12 is supported,
and this specification makes no attempt to alter this de facto
standard. As such, there is no support of the DecryptKeyIdentifier
specified in [RFC7030] for use with PKCS #12 (i.e., "enveloping"
is not supported). Note: The use of PBE requires that the password
be distributed to the client; methods to distribute this password are
beyond the scope of this document.
8.3.2. Server-Side Key Generation Response
If the request is successful, the server response MUST have an
HTTP 200 response code with a Content-Type of "application/pkcs12"
[PKCS12] that consists of a base64-encoded DER-encoded [X.690]
PFX [RFC7292].
Note that this response is different than the response returned as
described in Section 4.4.2 of [RFC7030], because here the private key
and the certificate are included in the same PFX.
When rejecting a request, the server MUST specify either an HTTP 4xx
error or an HTTP 5xx error. The response data's Content-Type MAY be
"text/plain" [RFC2046] to convey human-readable error messages.
Turner Standards Track [Page 39]
RFC 8295 EST Extensions January 2018
9. PAL and Certificate Enrollment
The /fullcmc PC is defined in [RFC7030]; the CMC (Certificate
Management over Cryptographic Message Syntax) requirements and
packages are defined in [RFC5272], [RFC5273], [RFC5274], and
[RFC6402]. This section describes PAL interactions.
Under normal circumstances, the client-server interactions for PKI
enrollment are as follows:
Client Server
--------------------->
POST req: PKIRequest
Content-Type: application/pkcs10
or
POST req: PKIRequest
Content-Type: application/pkcs7-mime
smime-type=CMC-request
<--------------------
POST res: PKIResponse
Content-Type: application/pkcs7-mime
smime-type=certs-only
or
POST res: PKIResponse
Content-Type: application/pkcs7-mime
smime-type=CMC-response
If the response is rejected during the same session:
Client Server
--------------------->
POST req: PKIRequest
Content-Type: application/pkcs10
or
POST req: PKIRequest
Content-Type: application/pkcs7-mime
smime-type=CMC-request
<--------------------
POST res: empty
HTTPS Status Code
or
POST res: PKIResponse
Content-Type: application/pkcs7-mime
smime-type=CMC-response
Turner Standards Track [Page 40]
RFC 8295 EST Extensions January 2018
If the request is to be filled later:
Client Server
--------------------->
POST req: PKIRequest
Content-Type: application/pkcs10
or
POST req: PKIRequest
Content-Type: application/pkcs7-mime
smime-type=CMC-request
<--------------------
POST res: empty
HTTPS Status Code
+ Retry-After
or
POST res: PKIResponse (pending)
Content-Type: application/pkcs7-mime
smime-type=CMC-response
--------------------->
POST req: PKIRequest (same request)
Content-Type: application/pkcs10
or
POST req: PKIRequest (CMC Status Info only)
Content-Type: application/pkcs7-mime
smime-type=CMC-request
<--------------------
POST res: PKIResponse
Content-Type: application/pkcs7-mime
smime-type=certs-only
or
POST res: PKIResponse
Content-Type: application/pkcs7-mime
smime-type=CMC-response
Turner Standards Track [Page 41]
RFC 8295 EST Extensions January 2018
With the PAL, the client begins after pulling the PAL and a Start
Issuance PAL package type, essentially adding the following before
the request:
Client Server
--------------------->
GET req: PAL
<--------------------
GET res: PAL
Content-Type: application/xml
The client then proceeds as above with a simple PKI enrollment or a
full CMC enrollment, or it begins enrollment assisted by a CSR:
Client Server
--------------------->
GET req: DS certificate with CSR
<--------------------
GET res: PAL
Content-Type: application/csrattrs
For immediately rejected requests, CMC works well. If the server
prematurely closes the connection, then the procedures in
Section 6.3.1 of [RFC7230] apply. But this might leave the client
and server in a different state. The client could merely resubmit
the request, but another option, documented herein, is for the client
to instead download the PAL to see if the server has processed the
request. Clients might also use this process when they are unable to
remain connected to the server for the entire enrollment process; if
the server does not or is not able to return a PKIData indicating a
status of pending, then the client will not know whether the request
was received. If a client uses the PAL and reconnects to determine
if the certification or rekey or renew request was processed:
o Clients MUST authenticate the server, and clients MUST check the
server's authorization.
o The server MUST authenticate the client, and the server MUST check
the client's authorization.
o Clients retrieve the PAL, using the /pal URI.
o Clients and servers use the operation path of "/simpleenroll",
"simplereenroll", or "/fullcmc", based on the PAL entry, with an
HTTP GET [RFC7231] to get the success or failure response.
Responses are as specified in [RFC7030].
Turner Standards Track [Page 42]
RFC 8295 EST Extensions January 2018
10. Security Considerations
This document relies on many other specifications; however, all of
the security considerations in [RFC7030] apply. Refer also to the
following:
o For HTTP, HTTPS, and TLS security considerations, see [RFC7231],
[RFC2818], and [RFC5246].
o For URI security considerations, see [RFC3986].
o For content type security considerations, see [RFC4073],
[RFC4108], [RFC5272], [RFC5652], [RFC5751], [RFC5934], [RFC5958],
[RFC6031], [RFC6032], [RFC6268], [RFC6402], [RFC7191], and
[RFC7292].
o For algorithms used to protect packages, see [RFC3370], [RFC5649],
[RFC5753], [RFC5754], [RFC5959], [RFC6033], [RFC6160], [RFC6161],
[RFC6162], and [RFC7192].
o For random numbers, see [RFC4086].
o For server-generated asymmetric key pairs, see [RFC7030].
Turner Standards Track [Page 43]
RFC 8295 EST Extensions January 2018
11. IANA Considerations
IANA has created the "PAL Package Types" registry and performed three
registrations: PAL Name Space, PAL XML Schema, and PAL Package Types.
11.1. PAL Name Space
This section registers a new XML namespace [XMLNS],
"urn:ietf:params:xml:ns:pal", per the guidelines in [RFC3688]:
URI: urn:ietf:params:xml:ns:pal
Registrant Contact: Sean Turner (sean@sn3rd.com)
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"https://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="https://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<title>Package Availability List</title>
</head>
<body>
<h1>Namespace for Package Availability List</h1>
<h2>urn:ietf:params:xml:ns:pal</h2>
<p>See RFC 8295</p>
</body>
</html>
END
11.2. PAL XML Schema
This section registers an XML schema as per the guidelines in
[RFC3688].
URI: urn:ietf:params:xml:schema:pal
Registrant Contact: Sean Turner (sean@sn3rd.com)
XML: See Section 2.1.2.
11.3. PAL Package Types
IANA has created a new registry named "PAL Package Types". This
registry is for PAL package types whose initial values are found in
Section 2.1.1. Future registrations of PAL package types are subject
to Expert Review, as defined in RFC 8126 [RFC8126]. Package types
MUST be paired with a media type; package types specify the path
components to be used that in turn specify the media type used.
Turner Standards Track [Page 44]
RFC 8295 EST Extensions January 2018
12. References
12.1. Normative References
[RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part Two: Media Types", RFC 2046,
DOI 10.17487/RFC2046, November 1996,
<https://www.rfc-editor.org/info/rfc2046>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2585] Housley, R. and P. Hoffman, "Internet X.509 Public Key
Infrastructure Operational Protocols: FTP and HTTP",
RFC 2585, DOI 10.17487/RFC2585, May 1999,
<https://www.rfc-editor.org/info/rfc2585>.
[RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818,
DOI 10.17487/RFC2818, May 2000,
<https://www.rfc-editor.org/info/rfc2818>.
[RFC2985] Nystrom, M. and B. Kaliski, "PKCS #9: Selected Object
Classes and Attribute Types Version 2.0", RFC 2985,
DOI 10.17487/RFC2985, November 2000,
<https://www.rfc-editor.org/info/rfc2985>.
[RFC3370] Housley, R., "Cryptographic Message Syntax (CMS)
Algorithms", RFC 3370, DOI 10.17487/RFC3370, August 2002,
<https://www.rfc-editor.org/info/rfc3370>.
[RFC3394] Schaad, J. and R. Housley, "Advanced Encryption Standard
(AES) Key Wrap Algorithm", RFC 3394, DOI 10.17487/RFC3394,
September 2002, <https://www.rfc-editor.org/info/rfc3394>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/info/rfc3986>.
Turner Standards Track [Page 45]
RFC 8295 EST Extensions January 2018
[RFC4073] Housley, R., "Protecting Multiple Contents with the
Cryptographic Message Syntax (CMS)", RFC 4073,
DOI 10.17487/RFC4073, May 2005,
<https://www.rfc-editor.org/info/rfc4073>.
[RFC4108] Housley, R., "Using Cryptographic Message Syntax (CMS) to
Protect Firmware Packages", RFC 4108,
DOI 10.17487/RFC4108, August 2005,
<https://www.rfc-editor.org/info/rfc4108>.
[RFC4514] Zeilenga, K., Ed., "Lightweight Directory Access Protocol
(LDAP): String Representation of Distinguished Names",
RFC 4514, DOI 10.17487/RFC4514, June 2006,
<https://www.rfc-editor.org/info/rfc4514>.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<https://www.rfc-editor.org/info/rfc5246>.
[RFC5272] Schaad, J. and M. Myers, "Certificate Management over CMS
(CMC)", RFC 5272, DOI 10.17487/RFC5272, June 2008,
<https://www.rfc-editor.org/info/rfc5272>.
[RFC5273] Schaad, J. and M. Myers, "Certificate Management over CMS
(CMC): Transport Protocols", RFC 5273,
DOI 10.17487/RFC5273, June 2008,
<https://www.rfc-editor.org/info/rfc5273>.
[RFC5274] Schaad, J. and M. Myers, "Certificate Management Messages
over CMS (CMC): Compliance Requirements", RFC 5274,
DOI 10.17487/RFC5274, June 2008,
<https://www.rfc-editor.org/info/rfc5274>.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
<https://www.rfc-editor.org/info/rfc5280>.
[RFC5649] Housley, R. and M. Dworkin, "Advanced Encryption Standard
(AES) Key Wrap with Padding Algorithm", RFC 5649,
DOI 10.17487/RFC5649, September 2009,
<https://www.rfc-editor.org/info/rfc5649>.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
RFC 5652, DOI 10.17487/RFC5652, September 2009,
<https://www.rfc-editor.org/info/rfc5652>.
Turner Standards Track [Page 46]
RFC 8295 EST Extensions January 2018
[RFC5751] Ramsdell, B. and S. Turner, "Secure/Multipurpose Internet
Mail Extensions (S/MIME) Version 3.2 Message
Specification", RFC 5751, DOI 10.17487/RFC5751,
January 2010, <https://www.rfc-editor.org/info/rfc5751>.
[RFC5753] Turner, S. and D. Brown, "Use of Elliptic Curve
Cryptography (ECC) Algorithms in Cryptographic Message
Syntax (CMS)", RFC 5753, DOI 10.17487/RFC5753,
January 2010, <https://www.rfc-editor.org/info/rfc5753>.
[RFC5754] Turner, S., "Using SHA2 Algorithms with Cryptographic
Message Syntax", RFC 5754, DOI 10.17487/RFC5754,
January 2010, <https://www.rfc-editor.org/info/rfc5754>.
[RFC5934] Housley, R., Ashmore, S., and C. Wallace, "Trust Anchor
Management Protocol (TAMP)", RFC 5934,
DOI 10.17487/RFC5934, August 2010,
<https://www.rfc-editor.org/info/rfc5934>.
[RFC5958] Turner, S., "Asymmetric Key Packages", RFC 5958,
DOI 10.17487/RFC5958, August 2010,
<https://www.rfc-editor.org/info/rfc5958>.
[RFC5959] Turner, S., "Algorithms for Asymmetric Key Package Content
Type", RFC 5959, DOI 10.17487/RFC5959, August 2010,
<https://www.rfc-editor.org/info/rfc5959>.
[RFC5967] Turner, S., "The application/pkcs10 Media Type", RFC 5967,
DOI 10.17487/RFC5967, August 2010,
<https://www.rfc-editor.org/info/rfc5967>.
[RFC6010] Housley, R., Ashmore, S., and C. Wallace, "Cryptographic
Message Syntax (CMS) Content Constraints Extension",
RFC 6010, DOI 10.17487/RFC6010, September 2010,
<https://www.rfc-editor.org/info/rfc6010>.
[RFC6031] Turner, S. and R. Housley, "Cryptographic Message Syntax
(CMS) Symmetric Key Package Content Type", RFC 6031,
DOI 10.17487/RFC6031, December 2010,
<https://www.rfc-editor.org/info/rfc6031>.
[RFC6032] Turner, S. and R. Housley, "Cryptographic Message Syntax
(CMS) Encrypted Key Package Content Type", RFC 6032,
DOI 10.17487/RFC6032, December 2010,
<https://www.rfc-editor.org/info/rfc6032>.
Turner Standards Track [Page 47]
RFC 8295 EST Extensions January 2018
[RFC6033] Turner, S., "Algorithms for Cryptographic Message Syntax
(CMS) Encrypted Key Package Content Type", RFC 6033,
DOI 10.17487/RFC6033, December 2010,
<https://www.rfc-editor.org/info/rfc6033>.
[RFC6160] Turner, S., "Algorithms for Cryptographic Message Syntax
(CMS) Protection of Symmetric Key Package Content Types",
RFC 6160, DOI 10.17487/RFC6160, April 2011,
<https://www.rfc-editor.org/info/rfc6160>.
[RFC6161] Turner, S., "Elliptic Curve Algorithms for Cryptographic
Message Syntax (CMS) Encrypted Key Package Content Type",
RFC 6161, DOI 10.17487/RFC6161, April 2011,
<https://www.rfc-editor.org/info/rfc6161>.
[RFC6162] Turner, S., "Elliptic Curve Algorithms for Cryptographic
Message Syntax (CMS) Asymmetric Key Package Content Type",
RFC 6162, DOI 10.17487/RFC6162, April 2011,
<https://www.rfc-editor.org/info/rfc6162>.
[RFC6268] Schaad, J. and S. Turner, "Additional New ASN.1 Modules
for the Cryptographic Message Syntax (CMS) and the Public
Key Infrastructure Using X.509 (PKIX)", RFC 6268,
DOI 10.17487/RFC6268, July 2011,
<https://www.rfc-editor.org/info/rfc6268>.
[RFC6402] Schaad, J., "Certificate Management over CMS (CMC)
Updates", RFC 6402, DOI 10.17487/RFC6402, November 2011,
<https://www.rfc-editor.org/info/rfc6402>.
[RFC7030] Pritikin, M., Ed., Yee, P., Ed., and D. Harkins, Ed.,
"Enrollment over Secure Transport", RFC 7030,
DOI 10.17487/RFC7030, October 2013,
<https://www.rfc-editor.org/info/rfc7030>.
[RFC7303] Thompson, H. and C. Lilley, "XML Media Types", RFC 7303,
DOI 10.17487/RFC7303, July 2014,
<https://www.rfc-editor.org/info/rfc7303>.
[RFC7191] Housley, R., "Cryptographic Message Syntax (CMS) Key
Package Receipt and Error Content Types", RFC 7191,
DOI 10.17487/RFC7191, April 2014,
<https://www.rfc-editor.org/info/rfc7191>.
[RFC7192] Turner, S., "Algorithms for Cryptographic Message Syntax
(CMS) Key Package Receipt and Error Content Types",
RFC 7192, DOI 10.17487/RFC7192, April 2014,
<https://www.rfc-editor.org/info/rfc7192>.
Turner Standards Track [Page 48]
RFC 8295 EST Extensions January 2018
[RFC7193] Turner, S., Housley, R., and J. Schaad, "The
application/cms Media Type", RFC 7193,
DOI 10.17487/RFC7193, April 2014,
<https://www.rfc-editor.org/info/rfc7193>.
[RFC7230] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext
Transfer Protocol (HTTP/1.1): Message Syntax and Routing",
RFC 7230, DOI 10.17487/RFC7230, June 2014,
<https://www.rfc-editor.org/info/rfc7230>.
[RFC7231] Fielding, R., Ed., and J. Reschke, Ed., "Hypertext
Transfer Protocol (HTTP/1.1): Semantics and Content",
RFC 7231, DOI 10.17487/RFC7231, June 2014,
<https://www.rfc-editor.org/info/rfc7231>.
[RFC7292] Moriarty, K., Ed., Nystrom, M., Parkinson, S., Rusch, A.,
and M. Scott, "PKCS #12: Personal Information Exchange
Syntax v1.1", RFC 7292, DOI 10.17487/RFC7292, July 2014,
<https://www.rfc-editor.org/info/rfc7292>.
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/info/rfc8126>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in
RFC 2119 Key Words", BCP 14, RFC 8174,
DOI 10.17487/RFC8174, May 2017,
<https://www.rfc-editor.org/info/rfc8174>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
[XML] Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and
F. Yergeau, "Extensible Markup Language (XML) 1.0
(Fifth Edition)", World Wide Web Consortium
Recommendation REC-xml-20081126, November 2008,
<https://www.w3.org/TR/2008/REC-xml-20081126/>.
[XMLSCHEMA]
Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes
Second Edition", World Wide Web Consortium
Recommendation REC-xmlschema-2-20041028, October 2004,
<https://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.
Turner Standards Track [Page 49]
RFC 8295 EST Extensions January 2018
[X.690] ITU-T, "Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished Encoding Rules
(DER)", ITU-T Recommendation X.690, ISO/IEC 8825-1,
August 2015, <https://www.itu.int/rec/T-REC-X.690/en>.
12.2. Informative References
[PKCS12] IANA, "PKCS #12", <https://www.iana.org/assignments/
media-types/application/pkcs12>.
[RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker,
"Randomness Requirements for Security", BCP 106, RFC 4086,
DOI 10.17487/RFC4086, June 2005,
<https://www.rfc-editor.org/info/rfc4086>.
[RFC4949] Shirey, R., "Internet Security Glossary, Version 2",
FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
<https://www.rfc-editor.org/info/rfc4949>.
[XMLNS] Bray, T., Hollander, D., Layman, A., Tobin, R., and H.
Thompson, "Namespaces in XML 1.0 (Third Edition)",
World Wide Web Consortium Recommendation
REC-xml-names-20091208/, December 2009,
<https://www.w3.org/TR/2009/REC-xml-names-20091208/>.
Turner Standards Track [Page 50]
RFC 8295 EST Extensions January 2018
Appendix A. Example Use of PAL
This is an informative appendix. It includes examples of protocol
flows.
Steps for using a PAL include the following:
1. Access PAL
2. Process PAL entries
2.1. Get CA certificates
2.2. Get CRLs
2.3. Get CSR attributes
2.4. Enroll: simple enrollment, re-enrollment, or full CMC
2.5. Get Firmware, TAMP, Symmetric Keys, or EE certificates
Client Server
---------------------> -+
GET req: | /pal
<--------------------- |
GET res: PAL |
Content-Type: application/xml |
|
---------------------> -+
GET req: | /cacerts
<--------------------- |
GET res: CA Certificates |
Content-Type: application/pkcs7-smime |
smime-type=certs-only |
|
---------------------> -+
GET req: | /crls
<--------------------- |
GET res: CRLs |
Content-Type: application/pkcs7-smime |
smime-type=crls-only |
|
---------------------> -+
GET req: | /csrattrs
<--------------------- |
GET res: attributes |
Turner Standards Track [Page 51]
RFC 8295 EST Extensions January 2018
---------------------> -+
POST req: PKIRequest | /simpleenroll and
Content-Type: application/pkcs10 | /simplereenroll
|
Content-Type: application/pkcs7-mime | /fullcmc
smime-type=CMC-request |
|
<-------------------- |
(success or failure) |
POST res: PKIResponse | /simpleenroll
Content-Type: application/pkcs7-mime | /simplereenroll
smime-type=certs-only | /fullcmc
|
Content-Type: application/pkcs7-mime | /fullcmc
smime-type=CMC-response |
|
--------------------> -+
GET req: | /firmware
<-------------------- | /tamp
GET res: Firmware, TAMP Query | /symmetrickeys
+ Updates, Symmetric Keys |
Content-Type: application/cms |
|
---------------------> -+
POST res: Firmware Receipts or Errors, | /firmware/return
TAMP Response or Confirms or Errors, | /tamp/return
Symmetric Key Receipts or Errors | /symmetrickeys/
| return
|
Content-Type: application/cms |
<-------------------- |
POST res: empty |
(success or failure) |
--------------------> -+
GET req: | /eecerts
<-------------------- |
GET res: Other EE certificates |
Content-Type: application/pkcs7-mime |
smime-type=certs-only |
The figure above shows /eecerts after /*/return, but this is for
illustrative purposes only.
Turner Standards Track [Page 52]
RFC 8295 EST Extensions January 2018
Appendix B. Additional CSR Attributes
This is an informative appendix.
In some cases, the client is severely limited in its ability to
encode and decode ASN.1 objects. If the client knows that a "csr"
template is being provided during enrollment, then it can peel the
returned CSR attribute, generate its keys, place the public key in
the certification request, and then sign the request. To accomplish
this, the server returns a pKCS7PDU attribute [RFC2985] in the
/csrattrs (the following is "pseudo ASN.1" and is only meant to show
the fields needed to accomplish returning a template certification
request):
pKCS7PDU ATTRIBUTE ::= {
WITH SYNTAX ContentInfo
ID pkcs-9-at-pkcs7PDU
}
pkcs-9-at-pkcs7PDU OBJECT IDENTIFIER ::= {
iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs9(9)
pkcs-9-at(25) 5
}
The ContentInfo is a PKIData:
PKIData ::= SEQUENCE {
reqSequence SEQUENCE SIZE(0..MAX) OF TaggedRequest
}
Where TaggedRequest is a choice between the PKCS #10 or Certificate
Request Message Format (CRMF) requests.
TaggedRequest ::= CHOICE {
tcr [0] TaggedCertificationRequest,
crm [1] CertReqMsg
}
Or, the ContentInfo can be a signed-data content type that further
encapsulates a PKIData.
Turner Standards Track [Page 53]
RFC 8295 EST Extensions January 2018
Acknowledgements
Thanks in no particular order go to Alexey Melnikov, Paul Hoffman,
Brad McInnis, Max Pritikin, Francois Rousseau, Chris Bonatti, and
Russ Housley for taking time to provide comments.
Author's Address
Sean Turner
sn3rd
Email: sean@sn3rd.com
Turner Standards Track [Page 54]