💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc4682.txt captured on 2023-06-14 at 17:03:16.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group E. Nechamkin
Request for Comments: 4682 Broadcom Corp.
Category: Standards Track J-F. Mule
CableLabs
December 2006
Multimedia Terminal Adapter (MTA) Management Information Base
for PacketCable- and IPCablecom-Compliant Devices
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The IETF Trust (2006).
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it defines a basic set of managed objects for Simple
Network Management Protocol (SNMP)-based management of PacketCable-
and IPCablecom-compliant Multimedia Terminal Adapter devices.
Table of Contents
1. The Internet-Standard Management Framework ......................2
2. Terminology .....................................................2
3. Introduction ....................................................4
3.1. Structure of the MTA MIB ...................................5
3.2. pktcMtaDevBase .............................................5
3.3. pktcMtaDevServer ...........................................6
3.4. pktcMtaDevSecurity .........................................6
3.5. Relationship between MIB Objects in the MTA MIB ............7
3.6. Secure Software Download ...................................8
3.7. X.509 Certificates Dependencies ............................8
4. Definitions .....................................................9
5. Acknowledgements ...............................................52
6. Security Considerations ........................................52
7. IANA Considerations ............................................55
8. Normative References ...........................................55
9. Informative References .........................................57
Nechamkin & Mule Standards Track [Page 1]
RFC 4682 IPCDN MTA MIB December 2006
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL", when used in the guidelines in this memo, are to be
interpreted as described in RFC 2119 [RFC2119].
The terms "MIB module" and "information module" are used
interchangeably in this memo. As used here, both terms refer to any
of the three types of information modules defined in Section 3 of RFC
2578 [RFC2578].
Some of the terms used in this memo are defined below. Some
additional terms are also defined in the PacketCable MTA Device
Provisioning Specification [PKT-SP-PROV] and the PacketCable Security
Specification [PKT-SP-SEC].
DOCSIS
The CableLabs(R) Certified(TM) Cable Modem project, also known as
DOCSIS(R) (Data over Cable Service Interface Specification), defines
interface requirements for cable modems involved in high-speed data
distribution over cable television system networks. DOCSIS also
refers to the ITU-T J.112 recommendation, Annex B, for cable modem
systems [ITU-T-J112].
Cable Modem
A Cable Modem (CM) acts as a data transport agent used to transfer
call management and voice data packets over a DOCSIS-compliant cable
system.
Multimedia Terminal Adapter
A Multimedia Terminal Adapter (MTA) is a PacketCable- or IPCablecom-
compliant device providing telephony services over a cable or hybrid
Nechamkin & Mule Standards Track [Page 2]
RFC 4682 IPCDN MTA MIB December 2006
system used to deliver video signals to a community. It contains an
interface to endpoints, a network interface, CODECs, and all
signaling and encapsulation functions required for Voice over IP
transport, call signaling, and Quality of Service signaling. An MTA
can be an embedded or a standalone device. An Embedded MTA (E-MTA)
is an MTA device containing an embedded DOCSIS Cable Modem. A
Standalone MTA (S-MTA) is an MTA device separated from the DOCSIS
cable modem by non-DOCSIS Message Access Control (MAC) interface
(e.g., Ethernet, USB).
Endpoint
An endpoint or MTA endpoint is a standard RJ-11 telephony physical
port located on the MTA and used for attaching the telephone device
to the MTA.
X.509 Certificate
A X.509 certificate is an Internet X.509 Public Key Infrastructure
certificate developed as part of the ITU-T X.500 Directory
recommendations. It is defined in RFC 3280 [RFC3280] and RFC 4630
[RFC4630].
Voice over IP
Voice over IP (VoIP) is a technology providing the means to transfer
digitized packets with voice information over IP networks.
Public Key Certificate
A Public Key Certificate (also known as a Digital Certificate) is a
binding between an entity's public key and one or more attributes
relating to its identity.
DHCP
The Dynamic Host Configuration Protocol (DHCP) is defined by RFC 2131
[RFC2131]. In addition, commonly used DHCP options are defined in
RFC 2132 [RFC2132]. Additional DHCP options used by PacketCable and
IPCablecom MTAs can be found in the CableLabs Client Configuration
DHCP specifications, RFC 3495 [RFC3495] and RFC 3594 [RFC3594].
TFTP
The Trivial File Transfer Protocol (TFTP) is defined by RFC 1350
[RFC1350].
HTTP
The Hypertext Transfer Protocol (HTTP/1.1) is defined by RFC 2616
[RFC2616].
Call Management Server
A Call Management Server (CMS) is an element of the PacketCable
network infrastructure that controls audio connections between MTAs.
Nechamkin & Mule Standards Track [Page 3]
RFC 4682 IPCDN MTA MIB December 2006
CODEC, COder-DECoder
A Coder-DECoder is a hardware or software component used in
audio/video systems to convert an analog signal to digital, and then
(possibly) to compress it so that lower bandwidth telecommunications
channels can be used. The signal is decompressed and converted
(decoded) back to analog output by a compatible CODEC at the
receiving end.
Operations Systems Support
An Operations Systems Support system (OSS) is a system of back office
software components used for fault, configuration, accounting,
performance, and security management working in interaction with each
other and providing the operations support in deployed PacketCable
systems.
Key Distribution Center
A Key Distribution Center (KDC) is an element of the OSS systems
functioning as a Kerberos Security Server, providing mutual
authentication of the various components of the PacketCable system
(e.g., mutual authentication between an MTA and a CMS, or between an
MTA and the Provisioning Server).
Security Association
A Security Association (SA) is a one-way relationship between a
sender and a receiver offering security services on the communication
flow.
3. Introduction
This MIB module provides a set of objects required for the management
of PacketCable, ETSI, and ITU-T IPCablecom compliant MTA devices.
The MTA MIB module is intended to supersede various MTA MIB modules
from which it is partly derived:
- The PacketCable 1.0 MTA MIB Specification [PKT-SP-MIB-MTA].
- The ITU-T IPCablecom MTA MIB requirements [ITU-T-J168].
- The ETSI MTA MIB [ETSITS101909-8]. The ETSI MTA MIB requirements
also refer to various signal characteristics defined in
[EN300001], Chapter 3, titled 'Ringing Signal Characteristics',
and [EN300659-1].
Several normative and informative references are used to help define
MTA MIB objects. As a convention, wherever PacketCable and
IPCablecom requirements are equivalent, the PacketCable reference is
used in the object REFERENCE clause. IPCablecom-compliant MTA
devices MUST use the equivalent IPCablecom references.
Nechamkin & Mule Standards Track [Page 4]
RFC 4682 IPCDN MTA MIB December 2006
3.1. Structure of the MTA MIB
The MTA MIB module is identified by pktcIetfMtaMib and is structured
in three object groups:
- pktcMtaDevBase defines the management information pertinent to the
MTA device itself.
- pktcMtaDevServer defines the management information pertinent to
the provisioning back office servers.
- pktcMtaDevSecurity defines the management information pertinent to
the PacketCable and IPCablecom security mechanisms.
The first two object groups, pktcMtaDevBase and pktcMtaDevServer,
contain only scalar information objects describing the corresponding
characteristics of the MTA device and back office servers.
The third group, pktcMtaDevSecurity, contains two tables controlling
the logical associations between KDC realms and Application Servers
(CMS and Provisioning Server). The rows in the various tables of the
MTA MIB module can be created automatically (e.g., by the device
according to the current state information), or they can be created
by the management station, depending on the operational situation.
The tables defined in the MTA MIB module may have a mixture of both
types of rows.
3.2. pktcMtaDevBase
This object group contains the management information related to the
MTA device itself. It also contains some objects used to control the
MTA state. Some highlights are as follows:
- pktcMtaDevSerialNumber. This object contains the MTA Serial
Number.
- pktcMtaDevEndPntCount. This object contains the number of
endpoints present in the managed MTA.
- pktcMtaDevProvisioningState. This object contains the information
describing the completion state of the MTA initialization process.
- pktcMtaDevEnabled. This object controls the administrative state
of the MTA endpoints and allows operators to enable or disable
telephony services on the device.
- pktcMtaDevResetNow. This object is used to instruct the MTA to
reset.
Nechamkin & Mule Standards Track [Page 5]
RFC 4682 IPCDN MTA MIB December 2006
3.3. pktcMtaDevServer
This object group contains the management information describing the
back office servers and the parameters related to the communication
timers. It also includes some objects controlling the initial MTA
interaction with the Provisioning Server.
Some highlights are as follows:
- pktcMtaDevServerDhcp1. This object contains the IP address of the
primary DHCP server designated for the MTA provisioning.
- pktcMtaDevServerDhcp2. This object contains the IP address of the
secondary DHCP server designated for the MTA provisioning.
- pktcMtaDevServerDns1. This object contains the IP address of the
primary DNS used by the managed MTA to resolve the Fully Qualified
Domain Name (FQDN) and IP addresses.
- pktcMtaDevServerDns2. This object contains the IP address of the
secondary DNS used by the managed MTA to resolve the FQDN and IP
addresses.
- pktcMtaDevConfigFile. This object contains the name of the
provisioning configuration file the managed MTA must download from
the Provisioning Server.
- pktcMtaDevProvConfigHash. This object contains the hash value of
the MTA configuration file calculated over its content. When the
managed MTA downloads the file, it authenticates the configuration
file using the hash value provided in this object.
3.4. pktcMtaDevSecurity
This object group contains the management information describing the
security-related characteristics of the managed MTA. It contains two
tables describing logical dependencies and parameters necessary to
establish Security Associations between the MTA and other Application
Servers (back office components and CMSes). The CMS table
(pktcMtaDevCmsTable) and the realm table (pktcMtaDevRealmTable) are
used for managing the MTA signaling security. The realm table
defines the CMS domains. The CMS table defines the CMS within the
domains. Each MTA endpoint is associated with one CMS at any given
time.
Nechamkin & Mule Standards Track [Page 6]
RFC 4682 IPCDN MTA MIB December 2006
The two tables in this object group are as follows:
- pktcMtaDevRealmTable. This table is used in conjunction with any
Application Server that communicates securely with the managed MTA
(CMS or Provisioning Server).
- pktcMtaDevCmsTable. This table contains the parameters describing
the SA establishment between the MTA and CMSes.
3.5. Relationship between MIB Objects in the MTA MIB
This section clarifies the relationship between various MTA MIB
objects with respect to the role they play in the process of
establishing Security Associations.
The process of Security Association establishment between an MTA and
Application Servers is described in the PacketCable Security
Specification [PKT-SP-SEC]. In particular, an MTA communicates with
2 types of back office Application Servers: Call Management Servers
and Provisioning Servers.
The SA establishment process consists of two steps:
a. Authentication Server Exchange (AS-exchange). This step provides
mutual authentication between the parties; i.e., between an MTA
and an Authentication Server. The process of AS-exchange is
defined by a number of parameters grouped per each realm. These
parameters are gathered in the Realm Table (pktcMtaDevRealmTable).
The Realm Table is indexed by the Index Counter and contains
conceptual column with the Kerberos realm name.
b. Application server exchange (AP-exchange). This step allows for
the establishment of Security Associations between authenticated
parties. The CMS table (pktcMtaDevCmsTable) contains the
parameters for the AP-exchange process between an MTA and a CMS.
The CMS table is indexed by the Index Counter and contains the CMS
FQDN (the conceptual column pktcMtaDevCmsFqdn). Each row contains
the Kerberos realm name associated with each CMS FQDN. This
allows for each CMS to exist in a different Kerberos realm.
The MTA MIB module also contains a group of scalar MIB objects in the
server group (pktcMtaDevServer). These objects define various
parameters for the AP-exchange process between an MTA and the
Provisioning Server. These objects are:
- pktcMtaDevProvUnsolicitedKeyMaxTimeout,
- pktcMtaDevProvUnsolicitedKeyNomTimeout,
Nechamkin & Mule Standards Track [Page 7]
RFC 4682 IPCDN MTA MIB December 2006
- pktcMtaDevProvUnsolicitedKeyMaxRetries, and
- pktcMtaDevProvSolicitedKeyTimeout.
3.6. Secure Software Download
E-MTAs are embedded with DOCSIS 1.1 cable modems. E-MTAs have their
software upgraded by the Cable Modem according to the DOCSIS
requirements.
Although E-MTAs have their software upgraded by the Cable Modem
according to the DOCSIS requirements, S-MTAs implement a specific
mechanism for Secure Software Download. This provides a means to
verify the code upgrade using Code Verification Certificates and is
modeled after the DOCSIS mechanism implemented in Cable Modems. This
is the reason why the MTA MIB and the S-MTA compliance modules also
rely on two MIB object groups:
- docsBpi2CodeDownloadGroup, defined in the IETF BPI Plus MIB module
(DOCS-IETF-BPI2-MIB [RFC4131]).
- docsDevSoftwareGroupV2, defined in the IETF Cable Devicev2 MIB
module (DOCS-CABLE-DEVICE-MIB [RFC4639]).
3.7. X.509 Certificates Dependencies
As specified in the PacketCable Security Specification [PKT-SP-SEC],
E-MTAs must use the authentication mechanism based on the X.509
Public Key Infrastructure Certificates, as defined in RFC 3280
[RFC3280] and RFC 4630 [RFC4630].
The value of the pktcMtaDevRealmOrgName MIB object should contain the
X.509 organization name attribute of the Telephony Service Provider
certificate (OrganizationName). X.509 attributes are defined using
UTF-8 string encoding [RFC3629, RFC3280, and RFC4630].
Note that UTF-8 encoded characters can be encoded as sequences of 1
to 6 octets, assuming that code points as high as 0x7ffffffff might
be used ([RFC3629]). Subsequent versions of Unicode and ISO 10646
have limited the upper bound to 0x10ffff ([RFC3629]). Consequently,
the current version of UTF-8, defined in RFC 3629, does not require
more than four octets to encode a valid code point.
Nechamkin & Mule Standards Track [Page 8]
RFC 4682 IPCDN MTA MIB December 2006
4. Definitions
The MIB module below makes references and citations to [RFC868],
[RFC3280], [RFC4630], and [RFC3617].
PKTC-IETF-MTA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
Unsigned32,
Counter32,
NOTIFICATION-TYPE,
mib-2
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC -- [RFC2579]
OBJECT-GROUP,
MODULE-COMPLIANCE,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB -- [RFC4001]
sysDescr
FROM SNMPv2-MIB -- [RFC3418]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
docsDevSoftwareGroupV2
FROM DOCS-CABLE-DEVICE-MIB -- [RFC4639]
DocsX509ASN1DEREncodedCertificate,
docsBpi2CodeDownloadGroup
FROM DOCS-IETF-BPI2-MIB -- [RFC4131]
LongUtf8String
FROM SYSAPPL-MIB -- [RFC2287]
ifPhysAddress
FROM IF-MIB; -- [RFC2863]
pktcIetfMtaMib MODULE-IDENTITY
LAST-UPDATED "200609180000Z" -- September 18, 2006
ORGANIZATION "IETF IP over Cable Data Network Working Group"
CONTACT-INFO
"Eugene Nechamkin
Broadcom Corporation,
200-13711 International Place,
Nechamkin & Mule Standards Track [Page 9]
RFC 4682 IPCDN MTA MIB December 2006
Richmond, BC, V6V 2Z8
CANADA
Phone: +1 604 233 8500
Email: enechamkin@broadcom.com
Jean-Francois Mule
Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, CO 80027-9750
U.S.A.
Phone: +1 303 661 9100
Email: jf.mule@cablelabs.com
IETF IPCDN Working Group
General Discussion: ipcdn@ietf.org
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
DESCRIPTION
"This MIB module defines the basic management object
for the Multimedia Terminal Adapter devices compliant
with PacketCable and IPCablecom requirements.
Copyright (C) The IETF Trust (2006). This version of
this MIB module is part of RFC 4682; see the RFC itself for
full legal notices."
REVISION "200609180000Z" -- September 18, 2006
DESCRIPTION
"Initial version, published as RFC 4682."
::= { mib-2 140 }
-- Textual Conventions
PktcMtaDevProvEncryptAlg ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This textual convention defines various types of the
encryption algorithms used for the encryption of the MTA
configuration file. The description of the encryption
algorithm for each enumerated value is as follows:
'none(0)' no encryption is used,
'des64CbcMode(1)' DES 64-bit key in CBC mode,
Nechamkin & Mule Standards Track [Page 10]
RFC 4682 IPCDN MTA MIB December 2006
't3Des192CbcMode(2)' 3DES 192-bit key in CBC mode,
'aes128CbcMode(3)' AES 128-bit key in CBC mode,
'aes256CbcMode(4)' AES 256-bit key in CBC mode."
SYNTAX INTEGER {
none (0),
des64CbcMode (1),
t3Des192CbcMode (2),
aes128CbcMode (3),
aes256CbcMode (4)
}
--=================================================================
-- The MTA MIB module only supports a single Provisioning Server.
--=================================================================
pktcMtaNotification OBJECT IDENTIFIER ::= { pktcIetfMtaMib 0 }
pktcMtaMibObjects OBJECT IDENTIFIER ::= { pktcIetfMtaMib 1 }
pktcMtaDevBase OBJECT IDENTIFIER ::= { pktcMtaMibObjects 1 }
pktcMtaDevServer OBJECT IDENTIFIER ::= { pktcMtaMibObjects 2 }
pktcMtaDevSecurity OBJECT IDENTIFIER ::= { pktcMtaMibObjects 3 }
pktcMtaDevErrors OBJECT IDENTIFIER ::= { pktcMtaMibObjects 4 }
pktcMtaConformance OBJECT IDENTIFIER ::= { pktcIetfMtaMib 2 }
--
-- The following pktcMtaDevBase group describes the base MTA objects
--
pktcMtaDevResetNow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object controls the MTA software reset.
Reading this object always returns 'false'. Setting this
object to 'true' causes the device to reset immediately
and the following actions to occur:
1. All connections (if present) are flushed locally.
2. All current actions such as ringing immediately
terminate.
3. Requests for signaling notifications, such as
notification based on digit map recognition, are
flushed.
4. All endpoints are disabled.
5. The provisioning flow is started at step MTA-1.
If a value is written into an instance of
pktcMtaDevResetNow, the agent MUST NOT retain the supplied
value across MTA re-initializations or reboots."
REFERENCE
Nechamkin & Mule Standards Track [Page 11]
RFC 4682 IPCDN MTA MIB December 2006
" PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevBase 1 }
pktcMtaDevSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object specifies the manufacturer's serial
number of this MTA. The value of this object MUST be
identical to the value specified in DHCP option 43,
sub-option 4. The list of sub-options for DHCP option
43 are defined in the PacketCable MTA Device
Provisioning Specification."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevBase 2 }
pktcMtaDevSwCurrentVers OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object identifies the software version currently
operating in the MTA.
The MTA MUST return a string descriptive of the current
software load. This object should use the syntax
defined by the individual vendor to identify the software
version. The data presented in this object MUST be
identical to the software version information contained
in the 'sysDescr' MIB object of the MTA. The value of
this object MUST be identical to the value specified in
DHCP option 43, sub-option 6. The list of sub-options for
DHCP option 43 are defined in the PacketCable MTA Device
Provisioning Specification."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevBase 3 }
pktcMtaDevFQDN OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the Fully Qualified Domain Name for
this MTA. The MTA FQDN is used to uniquely identify the
device to the PacketCable back office elements."
Nechamkin & Mule Standards Track [Page 12]
RFC 4682 IPCDN MTA MIB December 2006
::= { pktcMtaDevBase 4 }
pktcMtaDevEndPntCount OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the number of physical endpoints for
this MTA."
::= { pktcMtaDevBase 5 }
pktcMtaDevEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the MTA Admin Status of this device.
If this object is set to 'true', the MTA is
administratively enabled, and the MTA MUST be able to
interact with the PacketCable entities, such as CMS,
Provisioning Server, KDC, and other MTAs and MGs on all
PacketCable interfaces.
If this object is set to 'false', the MTA is
administratively disabled, and the MTA MUST perform the
following actions for all endpoints:
- Shut down all media sessions, if present.
- Shut down Network Control Signaling (NCS)
signaling by following the Restart in
Progress procedures in the PacketCable NCS
specification.
The MTA must execute all actions required to
enable or disable the telephony services for all
endpoints immediately upon receipt of an SNMP SET
operation.
Additionally, the MTA MUST maintain the SNMP Interface
for management and also the SNMP Key management interface.
Also, the MTA MUST NOT continue Kerberized key management
with CMSes until this object is set to 'true'.
Note: MTAs MUST renew the CMS Kerberos tickets according
to the PacketCable Security or IPCablecom Specification.
If a value is written into an instance of
pktcMtaDevEnabled, the agent MUST NOT retain the supplied
value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
PacketCable Security Specification;
PacketCable Network-Based Call Signaling Protocol
Nechamkin & Mule Standards Track [Page 13]
RFC 4682 IPCDN MTA MIB December 2006
Specification."
::= { pktcMtaDevBase 6 }
pktcMtaDevTypeIdentifier OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object provides the MTA device type identifier. The
value of this object must be a copy of the DHCP option 60
value exchanged between the MTA and the DHCP server. The
DHCP option 60 value contains an ASCII-encoded string
identifying capabilities of the MTA as defined in the
PacketCable MTA Device Provisioning Specification."
REFERENCE
" RFC 2132, DHCP Options and BOOTP Vendor Extensions;
PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevBase 7 }
pktcMtaDevProvisioningState OBJECT-TYPE
SYNTAX INTEGER {
pass (1),
inProgress (2),
failConfigFileError (3),
passWithWarnings (4),
passWithIncompleteParsing (5),
failureInternalError (6),
failureOtherReason (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object indicates the completion state of the MTA
device provisioning process.
pass:
If the configuration file could be parsed successfully
and the MTA is able to reflect the same in its
MIB, the MTA MUST return the value 'pass'.
inProgress:
If the MTA is in the process of being provisioned,
the MTA MUST return the value 'inProgress'.
failConfigFileError:
If the configuration file was in error due to incorrect
values in the mandatory parameters, the MTA MUST reject
the configuration file, and the MTA MUST return the value
Nechamkin & Mule Standards Track [Page 14]
RFC 4682 IPCDN MTA MIB December 2006
'failConfigFileError'.
passWithWarnings:
If the configuration file had proper values for all the
mandatory parameters but has errors in any of the optional
parameters (this includes any vendor-specific Object
Identifiers (OIDs) that are incorrect or not known
to the MTA), the MTA MUST return the value
'passWithWarnings'.
passWithIncompleteParsing:
If the configuration file is valid but the MTA cannot
reflect the same in its configuration (for example, too
many entries caused memory exhaustion), it must accept
the CMS configuration entries related, and the MTA MUST
return the value 'passWithIncompleteParsing'.
failureInternalError:
If the configuration file cannot be parsed due to an
Internal error, the MTA MUST return the value
'failureInternalError'.
failureOtherReason:
If the MTA cannot accept the configuration file for any
other reason than the ones stated above, the MTA MUST
return the value 'failureOtherReason'.
When a final SNMP INFORM is sent as part of Step 25 of the
MTA Provisioning process, this parameter is also included
in the final INFORM message."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevBase 8 }
pktcMtaDevHttpAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object indicates whether the HTTP protocol is
supported for the MTA configuration file transfer."
::= { pktcMtaDevBase 9 }
pktcMtaDevProvisioningTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
Nechamkin & Mule Standards Track [Page 15]
RFC 4682 IPCDN MTA MIB December 2006
DESCRIPTION
" This object defines the time interval for the provisioning
flow to complete. The MTA MUST finish all provisioning
operations starting from the moment when an MTA receives
its DHCP ACK and ending at the moment when the MTA
downloads its configuration file (e.g., MTA5 to MTA23)
within the period of time set by this object.
Failure to comply with this condition constitutes
a provisioning flow failure. If the object is set to 0,
the MTA MUST ignore the provisioning timer condition.
If a value is written into an instance of
pktcMtaDevProvisioningTimer, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
DEFVAL {10}
::= {pktcMtaDevBase 10}
pktcMtaDevProvisioningCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of times the
provisioning cycle has looped through step MTA-1."
::= {pktcMtaDevBase 11}
pktcMtaDevErrorOidsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcMtaDevErrorOidsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains the list of configuration errors or
warnings the MTA encountered when parsing the
configuration file it received from the Provisioning
Server.
For each error, an entry is created in this table,
containing the configuration parameters the MTA rejected
and the associated reason (e.g., wrong or unknown OID,
inappropriate object values). If the MTA
did not report a provisioning state of 'pass(1)' in
the pktcMtaDevProvisioningState object, this table MUST be
populated for each error or warning instance. Even if
different parameters share the same error type (e.g., all
realm name configuration parameters are invalid), all
observed errors or warnings must be reported as
different instances. Errors are placed into the table in
no particular order. The table MUST be cleared each time
Nechamkin & Mule Standards Track [Page 16]
RFC 4682 IPCDN MTA MIB December 2006
the MTA reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
::= {pktcMtaDevBase 12 }
pktcMtaDevErrorOidsEntry OBJECT-TYPE
SYNTAX PktcMtaDevErrorOidsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry contains the necessary information the MTA MUST
attempt to provide in case of configuration file errors or
warnings."
INDEX { pktcMtaDevErrorOidIndex }
::= {pktcMtaDevErrorOidsTable 1}
PktcMtaDevErrorOidsEntry ::= SEQUENCE {
pktcMtaDevErrorOidIndex Unsigned32,
pktcMtaDevErrorOid SnmpAdminString,
pktcMtaDevErrorValue SnmpAdminString,
pktcMtaDevErrorReason SnmpAdminString
}
pktcMtaDevErrorOidIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object is the index of the MTA configuration error
table. It is an integer value that starts at value '1'
and is incremented for each encountered configuration
file error or warning.
The maximum number of errors or warnings that can be
recorded in the pktcMtaDevErrorOidsTable is set to 1024 as
a configuration file is usually validated by operators
before deployment. Given the possible number of
configuration parameter assignments in the MTA
configuration file, 1024 is perceived as a sufficient
limit even with future extensions.
If the number of the errors in the configuration file
exceeds 1024, all errors beyond the 1024th one MUST
be ignored and not be reflected in the
pktcMtaDevErrorOidsTable."
::= {pktcMtaDevErrorOidsEntry 1}
Nechamkin & Mule Standards Track [Page 17]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaDevErrorOid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains a human readable representation
(character string) of the OID corresponding to the
configuration file parameter that caused the particular
error.
For example, if the value of the pktcMtaDevEnabled object
in the configuration file caused an error, then this
object instance will contain the human-readable string of
'1.3.6.1.2.1.140.1.1.6.0'.
If the MTA generated an error because it was not able
to recognize a particular OID, then this object
instance would contain an empty value (zero-length
string).
For example, if the value of an OID in the configuration
file was interpreted by the MTA as being 1.2.3.4.5, and if
the MTA was not able to recognize this OID as a valid one,
this object instance will contain a zero-length string.
If the number of errors in the configuration file exceeds
1024, then for all subsequent errors, the
pktcMtaDevErrorOid of the table's 1024th entry MUST
contain a human-readable representation of the
pktcMtaDevErrorsTooManyErrors object; i.e., the string
'1.3.6.1.2.1.140.1.1.4.1.0'.
Note that the syntax of this object is SnmpAdminString
instead of OBJECT IDENTIFIER because the object value may
not be a valid OID due to human or configuration tool
encoding errors."
::= {pktcMtaDevErrorOidsEntry 2}
pktcMtaDevErrorValue OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the value of the OID corresponding to
the configuration file parameter that caused the error.
If the MTA cannot recognize the OID of the
configuration parameter causing the error, then this
object instance contains the OID itself as interpreted
by the MTA in human-readable representation.
If the MTA can recognize the OID but generate an error due
to a wrong value of the parameter, then the object
Nechamkin & Mule Standards Track [Page 18]
RFC 4682 IPCDN MTA MIB December 2006
instance contains the erroneous value of the parameter as
read from the configuration file.
In both cases, the value of this object must be
represented in human-readable form as a character string.
For example, if the value of the pktcMtaDevEnabled object
in the configuration file was 3 (invalid value), then the
pktcMtaDevErrorValue object instance will contain the
human-readable (string) representation of value '3'.
Similarly, if the OID in the configuration file has been
interpreted by the MTA as being 1.2.3.4.5 and the MTA
cannot recognize this OID as a valid one, then this
pktcMtaDevErrorValue object instance will contain human
readable (string) representation of value '1.2.3.4.5'.
If the number of errors in the configuration file exceeds
1024, then for all subsequent errors, the
pktcMtaDevErrorValue of the table's 1024th entry MUST
contain a human-readable representation of the
pktcMtaDevErrorsTooManyErrors object; i.e., the string
'1.3.6.1.2.1.140.1.1.4.1.0'."
::= {pktcMtaDevErrorOidsEntry 3}
pktcMtaDevErrorReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object indicates the reason for the error or warning,
as per the MTA's interpretation, in human-readable form.
For example:
'VALUE NOT IN RANGE', 'VALUE DOES NOT MATCH TYPE',
'UNSUPPORTED VALUE', 'LAST 4 BITS MUST BE SET TO ZERO',
'OUT OF MEMORY - CANNOT STORE'.
This object may also contain vendor specific errors for
private vendor OIDs and any proprietary error codes or
messages that can help diagnose configuration errors.
If the number of errors in the configuration file exceeds
1024, then for all subsequent errors, the
pktcMtaDevErrorReason of the table's 1024th entry MUST
contain a human-readable string indicating the reason
for an error; for example,
'Too many errors in the configuration file'."
::= {pktcMtaDevErrorOidsEntry 4}
--
-- The following group describes server access and parameters used
Nechamkin & Mule Standards Track [Page 19]
RFC 4682 IPCDN MTA MIB December 2006
-- for the initial MTA provisioning and bootstrapping phases.
--
pktcMtaDevDhcpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the Internet address type for the
PacketCable DHCP servers specified in MTA MIB."
DEFVAL { ipv4 }
::= { pktcMtaDevServer 1}
pktcMtaDevServerDhcp1 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the Internet Address of the primary
DHCP server the MTA uses during provisioning.
The type of this address is determined by the value of
the pktcMtaDevDhcpServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the primary DHCP
server. It is provided by the CM to the MTA via the DHCP
option code 122, sub-option 1, as defined in RFC 3495.
The behavior of this object when the value of
pktcMtaDevDhcpServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified
in future versions of this MIB module.
If this object is of value
0.0.0.0, the MTA MUST stop all provisioning
attempts, as well as all other activities.
If this object is of value 255.255.255.255, it means
that there was no preference given for the primary
DHCP server, and, the MTA must follow the logic of
RFC2131, and the value of DHCP option 122,
sub-option 2, must be ignored."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 2131, Dynamic Host Configuration Protocol;
RFC 3495, DHCP Option for CableLabs Client Configuration."
::= { pktcMtaDevServer 2 }
pktcMtaDevServerDhcp2 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
Nechamkin & Mule Standards Track [Page 20]
RFC 4682 IPCDN MTA MIB December 2006
STATUS current
DESCRIPTION
" This object contains the Internet Address of the secondary
DHCP server the MTA uses during provisioning.
The type of this address is determined by the value of
the pktcMtaDevDhcpServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the secondary DHCP
server. It is provided by the CM to the MTA via the DHCP
option code 122, sub-option 2, as defined in RFC 3495.
The behavior of this object when the value of
pktcMtaDevDhcpServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified
in future versions of this MIB module.
If there was no secondary DHCP server provided in DHCP
Option 122, sub-option 2, this object must return the value
0.0.0.0."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 3495, DHCP Option for CableLabs Client Configuration."
::= { pktcMtaDevServer 3 }
pktcMtaDevDnsServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the Internet address type for the
PacketCable DNS servers specified in MTA MIB."
DEFVAL { ipv4 }
::= { pktcMtaDevServer 4}
pktcMtaDevServerDns1 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the IP Address of the primary
DNS server to be used by the MTA. The type of this address
is determined by the value of the
pktcMtaDevDnsServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the primary DNS server.
As defined in RFC 2132, PacketCable-compliant MTAs receive
the IP addresses of the DNS Servers in DHCP option 6.
The behavior of this object when the value of
pktcMtaDevDnsServerAddressType is other than 'ipv4(1)'
Nechamkin & Mule Standards Track [Page 21]
RFC 4682 IPCDN MTA MIB December 2006
is not presently specified, but it may be specified
in future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevServerDns1, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 2132, DHCP Options and BOOTP Vendor Extensions."
::= { pktcMtaDevServer 5 }
pktcMtaDevServerDns2 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the IP Address of the secondary
DNS server to be used by the MTA. The type of this address
is determined by the value of the
pktcMtaDevDnsServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the secondary DNS
server. As defined in RFC 2132, PacketCable-compliant MTAs
receive the IP addresses of the DNS Servers in DHCP
option 6.
The behavior of this object when the value of
pktcMtaDevDnsServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified
in future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevServerDns2, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 2132, DHCP Options and BOOTP Vendor Extensions."
::= { pktcMtaDevServer 6 }
pktcMtaDevTimeServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the Internet address type for the
PacketCable Time servers specified in MTA MIB."
DEFVAL { ipv4 }
::= { pktcMtaDevServer 7}
pktcMtaDevTimeServer OBJECT-TYPE
SYNTAX InetAddress
Nechamkin & Mule Standards Track [Page 22]
RFC 4682 IPCDN MTA MIB December 2006
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the Internet Address of the Time
Server used by an S-MTA for Time Synchronization. The type
of this address is determined by the value of the
pktcMtaDevTimeServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the Time Server used for Time
Synchronization.
In the case of an S-MTA, this object must be
populated with a value other than 0.0.0.0 as obtained
from DHCP option 4. The protocol by which the time of day
MUST be retrieved is defined in RFC 868.
In the case of an E-MTA, this object must contain a
value of 0.0.0.0 if the address type is 'ipv4(1)' since
an E-MTA does not use the Time Protocol for time
synchronization (an E-MTA uses the time retrieved by the
DOCSIS cable modem).
The behavior of this object when the value of
pktcMtaDevTimeServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified in
future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevTimeServer, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" RFC 868, Time Protocol;
RFC 2131, Dynamic Host Configuration Protocol;
RFC 2132, DHCP Options and BOOTP Vendor Extensions."
::= { pktcMtaDevServer 8}
pktcMtaDevConfigFile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object specifies the MTA device configuration file
information, including the access method, the server name,
and the configuration file name. The value of this object
is the Uniform Resource Locator (URL) of the configuration
file for TFTP or HTTP download.
If this object value is a TFTP URL, it must be formatted
as defined in RFC 3617.
If this object value is an HTTP URL, it must be formatted
as defined in RFC 2616.
If the MTA SNMP Enrollment mechanism is used, then the MTA
must download the file provided by the Provisioning Server
Nechamkin & Mule Standards Track [Page 23]
RFC 4682 IPCDN MTA MIB December 2006
during provisioning via an SNMP SET on this object.
If the MTA SNMP Enrollment mechanism is not used, this
object MUST contain the URL value corresponding to the
'siaddr' and 'file' fields received in the DHCP ACK to
locate the configuration file: the 'siaddr' and 'file'
fields represent the host and file of the TFTP URL,
respectively. In this case, the MTA MUST return an
'inconsistentValue' error in response to SNMP SET
operations.
The MTA MUST return a zero-length string if the server
address (host part of the URL) is unknown.
If a value is written into an instance of
pktcMtaDevConfigFile, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 3617, URI Scheme for TFTP; RFC 2616, HTTP 1.1"
::= { pktcMtaDevServer 9 }
pktcMtaDevSnmpEntity OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the FQDN of the SNMP entity of the
Provisioning Server. When the MTA SNMP Enrollment
Mechanism is used, this object represents the server that
the MTA communicates with, that it receives the
configuration file URL from, and that it sends the
enrollment notification to. The SNMP entity is also the
destination entity for all the provisioning
notifications. It may be used for post-provisioning
SNMP operations. During the provisioning phase, this
SNMP entity FQDN is supplied to the MTA via DHCP option
122, sub-option 3, as defined in RFC 3495. The MTA must
resolve the FQDN value before its very first network
interaction with the SNMP entity during the provisioning
phase."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 3495, DHCP Option for CableLabs Client Configuration."
::= { pktcMtaDevServer 10 }
pktcMtaDevProvConfigHash OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(20))
MAX-ACCESS read-write
STATUS current
Nechamkin & Mule Standards Track [Page 24]
RFC 4682 IPCDN MTA MIB December 2006
DESCRIPTION
" This object contains the hash value of the contents of the
configuration file.
The authentication algorithm is Secure Hashing Algorithm
1 (SHA-1), and the length is 160 bits. The hash
calculation MUST follow the requirements defined in the
PacketCable Security Specification. When the MTA SNMP
Enrollment mechanism is used, this hash value is
calculated and sent to the MTA prior to sending the
config file. This object value is then provided by the
Provisioning server via an SNMP SET operation.
When the MTA SNMP Enrollment mechanism is not in use, the
hash value is provided in the configuration file itself,
and it is also calculated by the MTA. This object value
MUST represent the hash value calculated by the MTA.
When the MTA SNMP Enrollment mechanism is not in use, the
MTA must reject all SNMP SET operations on this object and
return an 'inconsistentValue' error.
If a value is written into an instance of
pktcMtaDevProvConfigHash, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
PacketCable Security Specification."
::= { pktcMtaDevServer 11 }
pktcMtaDevProvConfigKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the key used to encrypt/decrypt
the configuration file when secure SNMPv3 provisioning
is used.
The value of this object is provided along with the
configuration file information (pktcMtaDevConfigFile)
and hash (pktcMtaDevProvConfigHash) by the Provisioning
Server via SNMP SET once the configuration file has been
created, as defined by the PacketCable Security
specification.
The privacy algorithm is defined by the
pktcMtaDevProvConfigEncryptAlg MIB object. The
MTA requirements related to the privacy algorithm are
defined in the PacketCable Security Specification.
If this object is set at any other provisioning step than
that allowed by the PacketCable MTA Device
Nechamkin & Mule Standards Track [Page 25]
RFC 4682 IPCDN MTA MIB December 2006
Provisioning Specification, the MTA SHOULD return
an 'inconsistentValue' error.
This object must not be used in non secure provisioning
mode. In non-secure provisioning modes, the MTA SHOULD
return an 'inconsistentValue' in response to SNMP SET
operations, and the MTA SHOULD return a zero-length
string in response to SNMP GET operations.
If a value is written into an instance of
pktcMtaDevProvConfigKey, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
PacketCable Security Specification."
::= { pktcMtaDevServer 12 }
pktcMtaDevProvConfigEncryptAlg OBJECT-TYPE
SYNTAX PktcMtaDevProvEncryptAlg
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object defines the encryption algorithm used for
privacy protection of the MTA Configuration File content."
DEFVAL { des64CbcMode }
::= { pktcMtaDevServer 13 }
pktcMtaDevProvSolicitedKeyTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..180)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object defines a Kerberos Key Management timer on the
MTA. It is the time period during which the MTA saves the
nonce and Server Kerberos Principal Identifier to match an
AP Request and its associated AP Reply response from the
Provisioning Server.
After the timeout has been exceeded, the client discards
this (nonce, Server Kerberos Principal Identifier) pair,
after which it will no longer accept a matching AP Reply.
This timer only applies when the Provisioning Server
initiated key management for SNMPv3 (with a
Wake Up message).
If this object is set to a zero value, the MTA MUST return
an 'inconsistentValue' in response to SNMP SET operations.
This object should not be used in non-secure provisioning
modes. In non-secure provisioning modes, the MTA MUST
return an 'inconsistentValue' in response to SNMP SET
operations, and the MTA MUST return a zero value in
Nechamkin & Mule Standards Track [Page 26]
RFC 4682 IPCDN MTA MIB December 2006
response to SNMP GET operations.
If a value is written into an instance of
pktcMtaDevProvSolicitedKeyTimeout, the agent MUST NOT
retain the supplied value across MTA re-initializations
or reboots."
DEFVAL { 3 }
::= { pktcMtaDevServer 14 }
--=================================================================
--
-- Unsolicited key updates are retransmitted according to an
-- exponential back-off mechanism using two timers and a maximum
-- retry counter for AS replies.
-- The initial retransmission timer value is the nominal timer
-- value (pktcMtaDevProvUnsolicitedKeyNomTimeout). The
-- retransmissions occur with an exponentially increasing interval
-- that caps at the maximum timeout value
-- (pktcMtaDevProvUnsolicitedKeyMaxTimeout).
-- Retransmissions stop when the maximum retry counter is reached
-- (pktcMtaDevProvUnsolicitedKeyMaxRetries).
-- For example, with values of 3 seconds for the nominal
-- timer, 100 seconds for the maximum timeout, and 8 retries max,
-- and with an exponential value of 2, this results in
-- retransmission intervals will be 3 s, 6 s, 12 s, 24 s, 48 s,
-- 96 s, 100 s, and 100 s;
-- retransmissions then stop because the maximum number of
-- retries (8) has been reached.
--
--=================================================================
--
-- Timeouts for unsolicited key management updates are only
-- pertinent before the first SNMPv3 message is sent between the
-- MTA and the Provisioning Server and before the configuration
-- file is loaded.
--
--=================================================================
pktcMtaDevProvUnsolicitedKeyMaxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object defines the timeout value that applies to
an MTA-initiated AP-REQ/REP key management exchange with
the Provisioning Server in SNMPv3 provisioning.
It is the maximum timeout value, and it may not be exceeded
in the exponential back-off algorithm. If the DHCP option
Nechamkin & Mule Standards Track [Page 27]
RFC 4682 IPCDN MTA MIB December 2006
code 122, sub-option 5, is provided to the MTA, it
overwrites this value.
In non-secure provisioning modes, the MTA MUST
return a zero value in response to SNMP GET
operations."
REFERENCE
" PacketCable Security Specification."
DEFVAL {600}
::= { pktcMtaDevServer 15 }
pktcMtaDevProvUnsolicitedKeyNomTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object defines the starting value of the timeout
for the AP-REQ/REP Backoff and Retry mechanism
with exponential timeout in SNMPv3 provisioning.
If the DHCP option code 122, sub-option 5, is provided
the MTA, it overwrites this value.
In non-secure provisioning modes, the MTA MUST
return a zero value in response to SNMP GET
operations."
REFERENCE
" PacketCable Security Specification."
DEFVAL {3}
::= { pktcMtaDevServer 16}
pktcMtaDevProvUnsolicitedKeyMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains a retry counter that applies to
an MTA-initiated AP-REQ/REP key management exchange with
the Provisioning Server in secure SNMPv3 provisioning.
It is the maximum number of retries before the MTA stops
attempting to establish a Security Association with
Provisioning Server.
If the DHCP option code 122, sub-option 5, is provided to
the MTA, it overwrites this value.
If this object is set to a zero value, the MTA MUST return
an 'inconsistentValue' in response to SNMP SET operations.
In non-secure provisioning modes, the MTA MUST
return a zero value in response to SNMP GET
operations."
REFERENCE
Nechamkin & Mule Standards Track [Page 28]
RFC 4682 IPCDN MTA MIB December 2006
" PacketCable Security Specification."
DEFVAL {8}
::= { pktcMtaDevServer 17 }
pktcMtaDevProvKerbRealmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the name of the associated
provisioning Kerberos realm acquired during the MTA4
provisioning step (DHCP Ack) for SNMPv3 provisioning.
The uppercase ASCII representation of the associated
Kerberos realm name MUST be used by both the Manager (SNMP
entity) and the MTA.
The Kerberos realm name for the Provisioning Server is
supplied to the MTA via DHCP option code 122, sub-option 6,
as defined in RFC 3495. In secure SNMP provisioning mode,
the value of the Kerberos realm name for the Provisioning
Server supplied in the MTA configuration file must match
the value supplied in the DHCP option code 122,
sub-option 6. Otherwise, the value of this object must
contain the value supplied in DHCP Option 122,
sub-option 6."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
RFC 3495, DHCP Option for CableLabs Client Configuration."
::= { pktcMtaDevServer 18 }
pktcMtaDevProvState OBJECT-TYPE
SYNTAX INTEGER {
operational (1),
waitingForSnmpSetInfo (2),
waitingForTftpAddrResponse (3),
waitingForConfigFile (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object defines the MTA provisioning state.
If the state is:
'operational(1)', the device has completed the loading
and processing of the initialization parameters.
'waitingForSnmpSetInfo(2)', the device is waiting on
its configuration file download access information.
Note that this state is only reported when the MTA
Nechamkin & Mule Standards Track [Page 29]
RFC 4682 IPCDN MTA MIB December 2006
SNMP enrollment mechanism is used.
'waitingForTftpAddrResponse(3)', the device has sent a
DNS request to resolve the server providing the
configuration file, and it is awaiting for a response.
Note that this state is only reported when the MTA
SNMP enrollment mechanism is used.
'waitingForConfigFile(4)', the device has sent a
request via TFTP or HTTP for the download of its
configuration file, and it is awaiting for a response or
the file download is in progress."
REFERENCE
" PacketCable MTA Device Provisioning Specification,
PacketCable Security Specification."
::= { pktcMtaDevServer 19 }
--
-- The following object group describes the security objects.
--
pktcMtaDevManufacturerCertificate OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the MTA Manufacturer Certificate.
The object value must be the ASN.1 DER encoding of the MTA
manufacturer's X.509 public key certificate. The MTA
Manufacturer Certificate is issued to each MTA
manufacturer and is installed into each MTA at the time of
manufacture or with a secure code download. The specific
requirements related to this certificate are defined in
the PacketCable or IPCablecom Security specifications."
REFERENCE
" PacketCable Security Specification."
::= {pktcMtaDevSecurity 1}
pktcMtaDevCertificate OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the MTA Device Certificate.
The object value must be the ASN.1 DER encoding of the
MTA's X.509 public-key certificate issued by the
manufacturer and installed into the MTA at the time of
Nechamkin & Mule Standards Track [Page 30]
RFC 4682 IPCDN MTA MIB December 2006
manufacture or with a secure code download.
This certificate contains the MTA MAC address. The
specific requirements related to this certificate are
defined in the PacketCable or IPCablecom Security
specifications."
REFERENCE
" PacketCable Security Specification."
::= { pktcMtaDevSecurity 2 }
pktcMtaDevCorrelationId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains a correlation ID, an arbitrary value
generated by the MTA that will be exchanged as part of the
device capability data to the Provisioning Application.
This random value is used as an identifier to correlate
related events in the MTA provisioning sequence.
This value is intended for use only during the MTA
initialization and configuration file download."
REFERENCE
" PacketCable MTA Device Provisioning Specification."
::= { pktcMtaDevSecurity 3 }
pktcMtaDevTelephonyRootCertificate OBJECT-TYPE
SYNTAX DocsX509ASN1DEREncodedCertificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the telephony Service Provider Root
certificate. The object value is the ASN.1 DER encoding of
the IP Telephony Service Provider Root X.509 public key
certificate. This certification is stored in the MTA
non-volatile memory and can be updated with a secure code
download. This certificate is used to validate the initial
AS Reply received by the MTA from the Key Distribution
Center (KDC) during the MTA initialization. The specific
requirements related to this certificate are defined in
the PacketCable or IPCablecom Security specifications."
REFERENCE
" PacketCable Security Specification."
::= { pktcMtaDevSecurity 4 }
--=================================================================
--
-- Informative Procedures for Setting up Security Associations
--
Nechamkin & Mule Standards Track [Page 31]
RFC 4682 IPCDN MTA MIB December 2006
-- A Security Association may be set up either via configuration or
-- via NCS signaling.
--
-- I. Security association setup via configuration.
--
-- The realm must be configured first. Associated with the realm
-- is a KDC. The realm table (pktcMtaDevRealmTable) indicates
-- information about the realm (e.g., name, organization name) and
-- parameters associated with KDC communications (e.g., grace
-- periods, AS Request/AS Reply adaptive back-off parameters).
--
-- Once the realm is established, one or more CMS(es) may be
-- defined in the realm. Associated with each CMS
-- entry in the pktcMtaDevCmsTable is an explicit reference
-- to a Realm via the realm name (pktcMtaDevCmsKerbRealmName),
-- the FQDN of the CMS, and parameters associated with IPSec
-- key management with the CMS (e.g., clock skew, AP Request/
-- AP Reply adaptive back-off parameters).
--
-- II. Security association setup via NCS signaling.
--
-- The procedure of establishing the Security Associations
-- for NCS signaling is described in the PacketCable Security
-- specification.
-- It involves the analysis of the pktcNcsEndPntConfigTable row
-- for the corresponding endpoint number and the correlation of
-- the CMS FQDN from this row with the CMS Table and
-- consequently, with the Realm Table. Both of these tables
-- are defined below. The pktcNcsEndPntConfigTable is defined in
-- the IP over Cable Data Network (IPCDN)
-- NCS Signaling MIB [NCSSIGMIB].
--
-- III. When the MTA receives wake-up or re-key messages from a
-- CMS, it performs key management based on the corresponding
-- entry in the CMS table. If the matching CMS entry does not
-- exist, it must ignore the wake-up or re-key messages.
--
--=================================================================
--=================================================================
--
-- pktcMtaDevRealmTable
--
-- The pktcMtaDevRealmTable shows the KDC realms. The table is
-- indexed with pktcMtaDevRealmIndex. The Realm Table contains the
-- pktcMtaDevRealmName in conjunction with any server that needs
-- a Security Association with the MTA. Uppercase must be used
-- to compare the pktcMtaDevRealmName content.
--
Nechamkin & Mule Standards Track [Page 32]
RFC 4682 IPCDN MTA MIB December 2006
--=================================================================
pktcMtaDevRealmAvailSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the index number of the first
available entry in the realm table (pktcMtaDevRealmTable).
If all the entries in the realm table have been assigned,
this object contains the value of zero.
A management station should create new entries in the
realm table, using the following procedure:
First, issue a management protocol retrieval operation
to determine the value of the first available index in the
realm table (pktcMtaDevRealmAvailSlot).
Second, issue a management protocol SET operation
to create an instance of the pktcMtaDevRealmStatus
object by setting its value to 'createAndWait(5)'.
Third, if the SET operation succeeded, continue
modifying the object instances corresponding to the newly
created conceptual row, without fear of collision with
other management stations. When all necessary conceptual
columns of the row are properly populated (via SET
operations or default values), the management station may
SET the pktcMtaDevRealmStatus object to 'active(1)'."
::= { pktcMtaDevSecurity 5 }
pktcMtaDevRealmTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcMtaDevRealmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object contains the realm table.
The CMS table (pktcMtaDevCmsTable) and the realm table
(pktcMtaDevRealmTable) are used for managing the MTA-CMS
Security Associations. The realm table defines the
Kerberos realms for the Application Servers (CMSes and the
Provisioning Server)."
::= { pktcMtaDevSecurity 6 }
pktcMtaDevRealmEntry OBJECT-TYPE
SYNTAX PktcMtaDevRealmEntry
MAX-ACCESS not-accessible
STATUS current
Nechamkin & Mule Standards Track [Page 33]
RFC 4682 IPCDN MTA MIB December 2006
DESCRIPTION
" This table entry object lists the MTA security parameters
for a single Kerberos realm. The conceptual rows MUST NOT
persist across MTA reboots."
INDEX { pktcMtaDevRealmIndex }
::= { pktcMtaDevRealmTable 1 }
PktcMtaDevRealmEntry ::= SEQUENCE {
pktcMtaDevRealmIndex Unsigned32,
pktcMtaDevRealmName SnmpAdminString,
pktcMtaDevRealmPkinitGracePeriod Unsigned32,
pktcMtaDevRealmTgsGracePeriod Unsigned32,
pktcMtaDevRealmOrgName LongUtf8String,
pktcMtaDevRealmUnsolicitedKeyMaxTimeout Unsigned32,
pktcMtaDevRealmUnsolicitedKeyNomTimeout Unsigned32,
pktcMtaDevRealmUnsolicitedKeyMaxRetries Unsigned32,
pktcMtaDevRealmStatus RowStatus
}
pktcMtaDevRealmIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object defines the realm table index."
::= { pktcMtaDevRealmEntry 1}
pktcMtaDevRealmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object identifies the Kerberos realm name in all
capitals. The MTA MUST prohibit the instantiation of any
two rows with identical Kerberos realm names. The MTA MUST
also verify that any search operation involving Kerberos
realm names is done using the uppercase ASCII
representation of the characters."
::= { pktcMtaDevRealmEntry 2 }
pktcMtaDevRealmPkinitGracePeriod OBJECT-TYPE
SYNTAX Unsigned32 (15..600)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object contains the PKINIT Grace Period. For the
purpose of key management with Application Servers (CMSes
Nechamkin & Mule Standards Track [Page 34]
RFC 4682 IPCDN MTA MIB December 2006
or the Provisioning Server), the MTA must utilize the
PKINIT exchange to obtain Application Server tickets. The
MTA may utilize the PKINIT exchange to obtain Ticket
Granting Tickets (TGTs), which are then used to obtain
Application Server tickets in a TGS exchange.
The PKINIT exchange occurs according to the current Ticket
Expiration Time (TicketEXP) and on the PKINIT Grace Period
(PKINITGP). The MTA MUST initiate the PKINIT exchange at
the time: TicketEXP - PKINITGP."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 15 }
::= { pktcMtaDevRealmEntry 3 }
pktcMtaDevRealmTgsGracePeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object contains the Ticket Granting Server Grace
Period (TGSGP). The Ticket Granting Server (TGS)
Request/Reply exchange may be performed by the MTA
on demand whenever an Application Server ticket is
needed to establish security parameters. If the MTA
possesses a ticket that corresponds to the Provisioning
Server or a CMS that currently exists in the CMS table,
the MTA MUST initiate the TGS Request/Reply exchange
at the time: TicketEXP - TGSGP."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 10 }
::= { pktcMtaDevRealmEntry 4 }
pktcMtaDevRealmOrgName OBJECT-TYPE
SYNTAX LongUtf8String
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object contains the X.500 organization name attribute
as defined in the subject name of the service provider
certificate."
REFERENCE
" PacketCable Security Specification;
RFCs 3280 and 4630, Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile"
::= { pktcMtaDevRealmEntry 5 }
Nechamkin & Mule Standards Track [Page 35]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaDevRealmUnsolicitedKeyMaxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the maximum time the MTA will
attempt to perform the exponential back-off algorithm.
This timer only applies when the MTA initiated key
management. If the DHCP option code 122, sub-option 4, is
provided to the MTA, it overwrites this value.
Unsolicited key updates are retransmitted according to an
exponential back-off mechanism using two timers and a
maximum retry counter for AS replies.
The initial retransmission timer value is the nominal
timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout). The
retransmissions occur with an exponentially increasing
interval that caps at the maximum timeout value
(pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
Retransmissions stop when the maximum retry counter is
reached (pktcMatDevRealmUnsolicitedMaxRetries).
For example, with values of 3 seconds for the nominal
timer, 20 seconds for the maximum timeout, and 5 retries
max, retransmission intervals will be 3 s, 6 s,
12 s, 20 s, and 20 s, and retransmissions then stop because
the maximum number of retries has been reached."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 100 }
::= { pktcMtaDevRealmEntry 6 }
pktcMtaDevRealmUnsolicitedKeyNomTimeout OBJECT-TYPE
SYNTAX Unsigned32 (100..600000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the initial timeout value
for the AS-REQ/AS-REP exponential back-off and retry
mechanism. If the DHCP option code 122, sub-option 4, is
provided to the MTA, it overwrites this value.
This value should account for the average roundtrip
time between the MTA and the KDC, as well as the
processing delay on the KDC.
Nechamkin & Mule Standards Track [Page 36]
RFC 4682 IPCDN MTA MIB December 2006
Unsolicited key updates are retransmitted according to an
exponential back-off mechanism using two timers and a
maximum retry counter for AS replies.
The initial retransmission timer value is the nominal
timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout). The
retransmissions occur with an exponentially increasing
interval that caps at the maximum timeout value
(pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
Retransmissions stop when the maximum retry counter is
reached (pktcMatDevRealmUnsolicitedMaxRetries).
For example, with values of 3 seconds for the nominal
timer, 20 seconds for the maximum timeout, and 5 retries
max, in retransmission intervals will be 3 s, 6 s,
12 s, 20 s, and 20 s; retransmissions then stop because
the maximum number of retries has been reached."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 3000 }
::= { pktcMtaDevRealmEntry 7 }
pktcMtaDevRealmUnsolicitedKeyMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the maximum number of retries the
MTA attempts to obtain a ticket from the KDC.
Unsolicited key updates are retransmitted according to an
exponential back-off mechanism using two timers and a
maximum retry counter for AS replies.
The initial retransmission timer value is the nominal
timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout). The
retransmissions occur with an exponentially increasing
interval that caps at the maximum timeout value
(pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
Retransmissions stop when the maximum retry counter is
reached (pktcMatDevRealmUnsolicitedMaxRetries).
For example, with values of 3 seconds for the nominal
timer, 20 seconds for the maximum timeout, and 5 retries
max, retransmission intervals will be 3 s, 6 s,
12 s, 20 s, and 20 s; retransmissions then stop because
the maximum number of retries has been reached."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 5 }
Nechamkin & Mule Standards Track [Page 37]
RFC 4682 IPCDN MTA MIB December 2006
::= { pktcMtaDevRealmEntry 8 }
pktcMtaDevRealmStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object defines the row status of this realm in the
realm table (pktcMtaDevRealmTable).
An entry in this table is not qualified for activation
until the object instances of all corresponding columns
have been initialized, either by default values, or via
explicit SET operations. Until all object instances in
this row are initialized, the status value for this realm
must be 'notReady(3)'.
In particular, two columnar objects must be explicitly
SET: the realm name (pktcMtaDevRealmName) and the
organization name (pktcMtaDevRealmOrgName). Once these 2
objects have been set and the row status is SET to
'active(1)', the MTA MUST NOT allow any modification of
these 2 object values.
The value of this object has no effect on whether other
columnar objects in this row can be modified."
::= { pktcMtaDevRealmEntry 9 }
--=================================================================
--
-- The CMS table, pktcMtaDevCmsTable
--
-- The CMS table and the realm table (pktcMtaDevRealmTable) are used
-- for managing the MTA signaling security. The CMS table defines
-- the CMSes the MTA is allowed to communicate with and contains
-- the parameters describing the SA establishment between the MTA
-- and a CMS.
-- The CMS table is indexed by pktcMtaDevCmsIndex. The table
-- contains the CMS FQDN (pktcMtaDevCmsFQDN) and the associated
-- Kerberos realm name (pktcMtaDevCmsKerbRealmName) so that the MTA
-- can find the corresponding Kerberos realm name in the
-- pktcMtaDevRealmTable.
--
--=================================================================
pktcMtaDevCmsAvailSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Nechamkin & Mule Standards Track [Page 38]
RFC 4682 IPCDN MTA MIB December 2006
" This object contains the index number of the first
available entry in the CMS table (pktcMtaDevCmsTable).
If all the entries in the CMS table have been assigned,
this object contains the value of zero.
A management station should create new entries in the
CMS table, using the following procedure:
First, issue a management protocol retrieval operation
to determine the value of the first available index in the
CMS table (pktcMtaDevCmsAvailSlot).
Second, issue a management protocol SET operation
to create an instance of the pktcMtaDevCmsStatus
object by setting its value to 'createAndWait(5)'.
Third, if the SET operation succeeded, continue
modifying the object instances corresponding to the newly
created conceptual row, without fear of collision with
other management stations. When all necessary conceptual
columns of the row are properly populated (via SET
operations or default values), the management station may
SET the pktcMtaDevCmsStatus object to 'active(1)'."
::= { pktcMtaDevSecurity 7 }
pktcMtaDevCmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcMtaDevCmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object defines the CMS table.
The CMS table (pktcMtaDevCmsTable) and the realm table
(pktcMtaDevRealmTable) are used for managing security
between the MTA and CMSes. Each CMS table entry defines
a CMS the managed MTA is allowed to communicate with
and contains security parameters for key management with
that CMS."
::= { pktcMtaDevSecurity 8 }
pktcMtaDevCmsEntry OBJECT-TYPE
SYNTAX PktcMtaDevCmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table entry object lists the MTA key management
parameters used when establishing Security Associations
with a CMS. The conceptual rows MUST NOT persist across
MTA reboots."
INDEX { pktcMtaDevCmsIndex }
Nechamkin & Mule Standards Track [Page 39]
RFC 4682 IPCDN MTA MIB December 2006
::= { pktcMtaDevCmsTable 1 }
PktcMtaDevCmsEntry ::= SEQUENCE {
pktcMtaDevCmsIndex Unsigned32,
pktcMtaDevCmsFqdn SnmpAdminString,
pktcMtaDevCmsKerbRealmName SnmpAdminString,
pktcMtaDevCmsMaxClockSkew Unsigned32,
pktcMtaDevCmsSolicitedKeyTimeout Unsigned32,
pktcMtaDevCmsUnsolicitedKeyMaxTimeout Unsigned32,
pktcMtaDevCmsUnsolicitedKeyNomTimeout Unsigned32,
pktcMtaDevCmsUnsolicitedKeyMaxRetries Unsigned32,
pktcMtaDevCmsIpsecCtrl TruthValue,
pktcMtaDevCmsStatus RowStatus
}
pktcMtaDevCmsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object defines the CMS table index."
::= { pktcMtaDevCmsEntry 1 }
pktcMtaDevCmsFqdn OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the CMS FQDN. The MTA must
prohibit the instantiation of any two rows with identical
FQDNs. The MTA must also verify that any search and/or
comparison operation involving a CMS FQDN is case
insensitive. The MTA must resolve the CMS FQDN as required
by the corresponding PacketCable Specifications."
REFERENCE
" PacketCable MTA Device Provisioning Specification;
PacketCable Security Specification;
PacketCable Network-Based Call Signaling Protocol
Specification."
::= { pktcMtaDevCmsEntry 2 }
pktcMtaDevCmsKerbRealmName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object identifies the Kerberos realm name in uppercase
characters associated with the CMS defined in this
Nechamkin & Mule Standards Track [Page 40]
RFC 4682 IPCDN MTA MIB December 2006
conceptual row. The object value is a reference
point to the corresponding Kerberos realm name in the
realm table (pktcMtaDevRealmTable)."
::= { pktcMtaDevCmsEntry 3 }
pktcMtaDevCmsMaxClockSkew OBJECT-TYPE
SYNTAX Unsigned32 (1..1800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the maximum allowable clock skew
between the MTA and the CMS defined in this row."
DEFVAL { 300 }
::= { pktcMtaDevCmsEntry 4 }
pktcMtaDevCmsSolicitedKeyTimeout OBJECT-TYPE
SYNTAX Unsigned32 (100..30000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object defines a Kerberos Key Management timer on the
MTA. It is the time period during which the MTA saves the
nonce and Server Kerberos Principal Identifier to match an
AP Request and its associated AP Reply response from the
CMS. This timer only applies when the CMS initiated key
management (with a Wake Up message or a Rekey message)."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 1000 }
::= { pktcMtaDevCmsEntry 5 }
--=================================================================
--
-- Unsolicited key updates are retransmitted according to an
-- exponential back-off mechanism using two timers and a maximum
-- retry counter for AS replies.
-- The initial retransmission timer value is the nominal timer
-- value (pktcMtaDevCmsUnsolicitedKeyNomTimeout). The
-- retransmissions occur with an exponentially increasing interval
-- that caps at the maximum timeout value
-- (pktcMtaDevCmsUnsolicitedKeyMaxTimeout).
-- Retransmissions stop when the maximum retry counter is reached
-- (pktcMatDevCmsUnsolicitedMaxRetries).
-- For example, with values of 3 seconds for the nominal
-- timer, 20 seconds for the maximum timeout, and 5 retries max,
-- retransmission intervals will be 3 s, 6 s, 12 s,
Nechamkin & Mule Standards Track [Page 41]
RFC 4682 IPCDN MTA MIB December 2006
-- 20 s, and 20 s; retransmissions then stop due to the
-- maximum number of retries reached.
--
--=================================================================
pktcMtaDevCmsUnsolicitedKeyMaxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object defines the timeout value that only applies
to an MTA-initiated key management exchange. It is the
maximum timeout, and it may not be exceeded in the
exponential back-off algorithm."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 600 }
::= { pktcMtaDevCmsEntry 6 }
pktcMtaDevCmsUnsolicitedKeyNomTimeout OBJECT-TYPE
SYNTAX Unsigned32 (100..30000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object defines the starting value of the timeout
for an MTA-initiated key management. It should account for
the average roundtrip time between the MTA and the CMS and
the processing time on the CMS."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 500 }
::= { pktcMtaDevCmsEntry 7 }
pktcMtaDevCmsUnsolicitedKeyMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object contains the maximum number of retries before
the MTA stops attempting to establish a Security
Association with the CMS."
REFERENCE
" PacketCable Security Specification."
DEFVAL { 5 }
::= { pktcMtaDevCmsEntry 8 }
Nechamkin & Mule Standards Track [Page 42]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaDevCmsIpsecCtrl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object specifies the MTA IPSec control flag.
If the object value is 'true', the MTA must use Kerberos
Key Management and IPsec to communicate with this CMS. If
it is 'false', IPSec Signaling Security and Kerberos key
management are disabled for this specific CMS."
DEFVAL { true }
::= { pktcMtaDevCmsEntry 9 }
pktcMtaDevCmsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object defines the row status associated with this
particular CMS in the CMS table (pktcMtaDevCmsTable).
An entry in this table is not qualified for activation
until the object instances of all corresponding columns
have been initialized, either by default values or via
explicit SET operations. Until all object instances in
this row are initialized, the status value for this realm
must be 'notReady(3)'.
In particular, two columnar objects must be SET: the
CMS FQDN (pktcMtaDevCmsFqdn) and the Kerberos realm name
(pktcMtaDevCmsKerbRealmName). Once these 2 objects have
been set and the row status is SET to 'active(1)', the MTA
MUST NOT allow any modification of these 2 object values.
The value of this object has no effect on
whether other columnar objects in this row can be
modified."
::= { pktcMtaDevCmsEntry 10 }
pktcMtaDevResetKrbTickets OBJECT-TYPE
SYNTAX BITS {
invalidateProvOnReboot (0),
invalidateAllCmsOnReboot (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object defines a Kerberos Ticket Control Mask that
instructs the MTA to invalidate the specific Application
Nechamkin & Mule Standards Track [Page 43]
RFC 4682 IPCDN MTA MIB December 2006
Server Kerberos ticket(s) that are stored locally in the
MTA NVRAM (non-volatile or persistent memory).
If the MTA does not store Kerberos tickets in NVRAM, it
MUST ignore setting of this object and MUST report a BITS
value of zero when the object is read.
If the MTA supports Kerberos tickets storage in NVRAM, the
object value is encoded as follows:
- Setting the invalidateProvOnReboot bit (bit 0) to 1
means that the MTA MUST invalidate the Kerberos
Application Ticket(s) for the Provisioning Application
at the next MTA reboot if secure SNMP provisioning mode
is used. In non-secure provisioning modes, the MTA MUST
return an 'inconsistentValue' in response to SNMP SET
operations with a bit 0 set to 1.
- Setting the invalidateAllCmsOnReboot bit (bit 1) to 1
means that the MTA MUST invalidate the Kerberos
Application Ticket(s) for all CMSes currently assigned
to the MTA endpoints.
If a value is written into an instance of
pktcMtaDevResetKrbTickets, the agent MUST retain the
supplied value across an MTA re-initialization or
reboot."
REFERENCE
"PacketCable Security Specification."
DEFVAL { { } }
::= { pktcMtaDevSecurity 9 }
--
-- The following group, pktcMtaDevErrors, defines an OID
-- corresponding to error conditions encountered during the MTA
-- provisioning.
--
pktcMtaDevErrorsTooManyErrors OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This object defines the OID corresponding to the error
condition when too many errors are encountered in the
MTA configuration file during provisioning."
::= { pktcMtaDevErrors 1 }
pktcMtaDevProvisioningEnrollment NOTIFICATION-TYPE
OBJECTS {
sysDescr,
pktcMtaDevSwCurrentVers,
pktcMtaDevTypeIdentifier,
ifPhysAddress,
pktcMtaDevCorrelationId
Nechamkin & Mule Standards Track [Page 44]
RFC 4682 IPCDN MTA MIB December 2006
}
STATUS current
DESCRIPTION
" This INFORM notification is issued by the MTA to initiate
the PacketCable provisioning process when the MTA SNMP
enrollment mechanism is used.
It contains the system description, the current software
version, the MTA device type identifier, the MTA MAC
address (obtained in the MTA ifTable in the ifPhysAddress
object that corresponds to the ifIndex 1), and a
correlation ID."
::= { pktcMtaNotification 1 }
pktcMtaDevProvisioningStatus NOTIFICATION-TYPE
OBJECTS {
ifPhysAddress,
pktcMtaDevCorrelationId,
pktcMtaDevProvisioningState
}
STATUS current
DESCRIPTION
" This INFORM notification may be issued by the MTA to
confirm the completion of the PacketCable provisioning
process, and to report its provisioning completion
status.
It contains the MTA MAC address (obtained in the MTA
ifTable in the ifPhysAddress object that corresponds
to the ifIndex 1), a correlation ID and the MTA
provisioning state as defined in
pktcMtaDevProvisioningState."
::= { pktcMtaNotification 2 }
--
-- Compliance Statements
--
pktcMtaCompliances OBJECT IDENTIFIER ::= { pktcMtaConformance 1 }
pktcMtaGroups OBJECT IDENTIFIER ::= { pktcMtaConformance 2 }
pktcMtaBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
" The compliance statement for MTA devices that implement
PacketCable or IPCablecom requirements.
This compliance statement applies to MTA implementations
that support PacketCable 1.0 or IPCablecom requirements,
which are not IPv6-capable at the time of this
Nechamkin & Mule Standards Track [Page 45]
RFC 4682 IPCDN MTA MIB December 2006
RFC publication."
MODULE -- Unconditionally mandatory groups for MTAs
MANDATORY-GROUPS {
pktcMtaGroup,
pktcMtaNotificationGroup
}
OBJECT pktcMtaDevDhcpServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevDnsServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevTimeServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevServerDhcp1
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevServerDhcp2
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevServerDns1
Nechamkin & Mule Standards Track [Page 46]
RFC 4682 IPCDN MTA MIB December 2006
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevServerDns2
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevTimeServer
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevProvConfigEncryptAlg
SYNTAX PktcMtaDevProvEncryptAlg
DESCRIPTION
"An implementation is only required to support
values of none(0) and des64Cbcmode(1).
An IV of zero is used to encrypt in des64Cbcmode, and
the length of pktcMtaDevProvConfigKey is 64 bits, as
defined in the PacketCable Security specification.
Other encryption types may be defined in future
versions of this MIB module."
OBJECT pktcMtaDevRealmOrgName
SYNTAX LongUtf8String (SIZE (1..384))
DESCRIPTION
"The Organization Name field in X.509 certificates
can contain up to 64 UTF-8 encoded characters,
as defined in RFCs 3280 and 4630. Therefore, compliant
devices are only required to support Organization
Name values of up to 64 UTF-8 encoded characters.
Given that RFCs 3280 and 4630 define the UTF-8 encoding,
compliant devices must support a maximum size of 384
octets for pktcMtaDevRealmOrgName. The calculation of
384 octets comes from the RFC 3629 UTF-8 encoding
definition whereby the UTF-8 encoded characters
are encoded as sequences of 1 to 6 octets,
assuming that code points as high as 0x7ffffffff
might be used. Subsequent versions of Unicode and ISO
10646 have limited the upper bound to 0x10ffff.
Nechamkin & Mule Standards Track [Page 47]
RFC 4682 IPCDN MTA MIB December 2006
Consequently, the current version of UTF-8, defined in
RFC 3629, does not require more than four octets to
encode a valid code point."
::= { pktcMtaCompliances 1 }
pktcMtaGroup OBJECT-GROUP
OBJECTS {
pktcMtaDevResetNow,
pktcMtaDevSerialNumber,
pktcMtaDevSwCurrentVers,
pktcMtaDevFQDN,
pktcMtaDevEndPntCount,
pktcMtaDevEnabled,
pktcMtaDevProvisioningCounter,
pktcMtaDevErrorOid,
pktcMtaDevErrorValue,
pktcMtaDevErrorReason,
pktcMtaDevTypeIdentifier,
pktcMtaDevProvisioningState,
pktcMtaDevHttpAccess,
pktcMtaDevCertificate,
pktcMtaDevCorrelationId,
pktcMtaDevManufacturerCertificate,
pktcMtaDevDhcpServerAddressType,
pktcMtaDevDnsServerAddressType,
pktcMtaDevTimeServerAddressType,
pktcMtaDevProvConfigEncryptAlg,
pktcMtaDevServerDhcp1,
pktcMtaDevServerDhcp2,
pktcMtaDevServerDns1,
pktcMtaDevServerDns2,
pktcMtaDevTimeServer,
pktcMtaDevConfigFile,
pktcMtaDevSnmpEntity,
pktcMtaDevRealmPkinitGracePeriod,
pktcMtaDevRealmTgsGracePeriod,
pktcMtaDevRealmAvailSlot,
pktcMtaDevRealmName,
pktcMtaDevRealmOrgName,
pktcMtaDevRealmUnsolicitedKeyMaxTimeout,
pktcMtaDevRealmUnsolicitedKeyNomTimeout,
pktcMtaDevRealmUnsolicitedKeyMaxRetries,
pktcMtaDevRealmStatus,
pktcMtaDevCmsAvailSlot,
pktcMtaDevCmsFqdn,
pktcMtaDevCmsKerbRealmName,
pktcMtaDevCmsUnsolicitedKeyMaxTimeout,
Nechamkin & Mule Standards Track [Page 48]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaDevCmsUnsolicitedKeyNomTimeout,
pktcMtaDevCmsUnsolicitedKeyMaxRetries,
pktcMtaDevCmsSolicitedKeyTimeout,
pktcMtaDevCmsMaxClockSkew,
pktcMtaDevCmsIpsecCtrl,
pktcMtaDevCmsStatus,
pktcMtaDevResetKrbTickets,
pktcMtaDevProvUnsolicitedKeyMaxTimeout,
pktcMtaDevProvUnsolicitedKeyNomTimeout,
pktcMtaDevProvUnsolicitedKeyMaxRetries,
pktcMtaDevProvKerbRealmName,
pktcMtaDevProvSolicitedKeyTimeout,
pktcMtaDevProvConfigHash,
pktcMtaDevProvConfigKey,
pktcMtaDevProvState,
pktcMtaDevProvisioningTimer,
pktcMtaDevTelephonyRootCertificate
}
STATUS current
DESCRIPTION
" A collection of objects for managing PacketCable or
IPCablecom MTA implementations."
::= { pktcMtaGroups 1 }
pktcMtaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
pktcMtaDevProvisioningStatus,
pktcMtaDevProvisioningEnrollment
}
STATUS current
DESCRIPTION
" A collection of notifications dealing with the change of
MTA provisioning status."
::= { pktcMtaGroups 2 }
pktcMtaBasicSmtaCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
" The compliance statement for S-MTA devices
that implement PacketCable or IPCablecom requirements.
This compliance statement applies to S-MTA implementations
that support PacketCable or IPCablecom requirements,
which are not IPv6-capable at the time of this
RFC publication."
MODULE -- Unconditionally Mandatory Groups for S-MTA devices
MANDATORY-GROUPS {
Nechamkin & Mule Standards Track [Page 49]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaGroup,
pktcMtaNotificationGroup
}
OBJECT pktcMtaDevDhcpServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevDnsServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevTimeServerAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
" Support for address types other than 'ipv4(1)'
is not presently specified and therefore is not
required. It may be defined in future versions of
this MIB module."
OBJECT pktcMtaDevServerDhcp1
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevServerDhcp2
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevServerDns1
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
Nechamkin & Mule Standards Track [Page 50]
RFC 4682 IPCDN MTA MIB December 2006
OBJECT pktcMtaDevServerDns2
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevTimeServer
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses. Other address types support may be defined in
future versions of this MIB module."
OBJECT pktcMtaDevProvConfigEncryptAlg
SYNTAX PktcMtaDevProvEncryptAlg
DESCRIPTION
"An implementation is only required to support
values of none(0) and des64Cbcmode(1).
An IV of zero is used to encrypt in des64Cbcmode, and
the length of pktcMtaDevProvConfigKey is 64 bits, as
defined in the PacketCable Security specification.
Other encryption types may be defined in future
versions of this MIB module."
OBJECT pktcMtaDevRealmOrgName
SYNTAX LongUtf8String (SIZE (1..384))
DESCRIPTION
"The Organization Name field in X.509 certificates
can contain up to 64 UTF-8 encoded characters, as
defined in RFCs 3280 and 4630. Therefore, compliant
devices are only required to support Organization
Name values of up to 64 UTF-8 encoded characters.
Given that RFCs 3280 and 4630 define the UTF-8 encoding,
compliant devices must support a maximum size of 384
octets for pktcMtaDevRealmOrgName. The calculation of
384 octets comes from the RFC 3629 UTF-8 encoding
definition whereby the UTF-8 encoded characters
are encoded as sequences of 1 to 6 octets,
assuming that code points as high as 0x7ffffffff
might be used. Subsequent versions of Unicode and ISO
10646 have limited the upper bound to 0x10ffff.
Consequently, the current version of UTF-8, defined in
RFC 3629 does not require more than four octets to
encode a valid code point."
MODULE DOCS-CABLE-DEVICE-MIB
MANDATORY-GROUPS {
Nechamkin & Mule Standards Track [Page 51]
RFC 4682 IPCDN MTA MIB December 2006
docsDevSoftwareGroupV2
}
MODULE DOCS-IETF-BPI2-MIB
MANDATORY-GROUPS {
docsBpi2CodeDownloadGroup
}
::= { pktcMtaCompliances 2 }
END
5. Acknowledgements
The current editors would like to thank the members of the IETF IPCDN
working group and the CableLabs PacketCable Provisioning and OSS
focus team for their comments and suggestions. In particular, we
wish to express our gratitude for the contributions made by the
following individuals (in no particular order): Angela Lyda,Sumanth
Channabasappa, Matt A. Osman, Klaus Hermanns, Paul Duffy, Rick
Vetter, Sasha Medvinsky, Roy Spitzer, Itay Sherman, Satish Kumar and
Eric Rosenfeld. Finally, special thanks to our area director Bert
Wijnen, Rich Woundy, Randy Presuhn, Mike Heard, and Dave Thaler.
6. Security Considerations
There are a number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. Improper manipulation of the objects defined in
this MIB may result in random behavior of MTA devices and may result
in service disruption. These are the tables and objects and their
sensitivity/vulnerability:
- The following objects, if SET maliciously, would cause the MTA
device to reset and/or stop its service:
pktcMtaDevResetNow.
pktcMtaDevEnabled.
- All writable objects in the pktcMtaDevServer group and some in the
pktcMtaDevRealmTable share the potential, if SET maliciously, to
prevent the MTA from provisioning properly. Thus, they are
considered very sensitive for service delivery. The objects in
question are:
Nechamkin & Mule Standards Track [Page 52]
RFC 4682 IPCDN MTA MIB December 2006
pktcMtaDevProvisioningTimer,
pktcMtaDevDhcpServerAddressType,
pktcMtaDevDnsServerAddressType,
pktcMtaDevTimeServerAddressType,
pktcMtaDevProvConfigEncryptAlg,
pktcMtaDevServerDns1,
pktcMtaDevServerDns2,
pktcMtaDevTimeServer,
pktcMtaDevConfigFile,
pktcMtaDevProvConfigHash,
pktcMtaDevProvConfigKey,
pktcMtaDevProvSolicitedKeyTimeout,
pktcMtaDevRealmName,
pktcMtaDevRealmOrgName,
pktcMtaDevRealmUnsolicitedKeyMaxTimeout,
pktcMtaDevRealmUnsolicitedKeyNomTimeout,
pktcMtaDevRealmUnsolicitedKeyMaxRetries, and
pktcMtaDevRealmStatus.
Certain of the above objects have additional specific
vulnerabilities:
o pktcMtaDevServerDns1 and pktcMtaDevServerDns2, if SET
maliciously, could prevent the MTA from being authenticated and
consequently from getting telephony services.
o pktcMtaDevRealmStatus, if SET maliciously, could cause the
whole row of the table to be deleted, which may prevent MTA
from getting telephony services.
- All writable objects in the pktcMtaDevCmsTable table share the
potential, if SET maliciously, to disrupt the telephony service by
altering which Call Management Server the MTA must send signaling
registration to; in particular:
pktcMtaDevCmsFqdn,
pktcMtaDevCmsKerbRealmName,
pktcMtaDevCmsMaxClockSkew,
pktcMtaDevCmsSolicitedKeyTimeout,
pktcMtaDevCmsUnsolicitedKeyMaxTimeout,
pktcMtaDevCmsUnsolicitedKeyNomTimeout,
pktcMtaDevCmsUnsolicitedKeyMaxRetries (this object, if set to a
zero value '0', may prevent the MTA from retrying its attempt
to establish a Security Association with the CMS), and
pktcMtaDevCmsStatus.
Nechamkin & Mule Standards Track [Page 53]
RFC 4682 IPCDN MTA MIB December 2006
- Some writable objects in the pktcMtaDevRealmTable table will not
have an immediate effect on service, if SET maliciously. However,
they may impact the service performance and cause avalanche
attacks on provisioning and Kerberos KDC servers, especially after
massive device reboots occur. The objects in question are as
follows:
pktcMtaDevResetKrbTickets: This object, if set to 'true', will
cause the MTA to request a new Kerberos ticket at reboot.
pktcMtaDevRealmPkinitGracePeriod, pktcMtaDevRealmTgsGracePeriod:
These 2 objects, if set to short time periods, will cause the MTA
to renew its tickets more frequently.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. Some of these objects may
contain information that may be sensitive from a business or customer
perspective. It is thus important to control even GET and/or NOTIFY
access to these objects and possibly to even encrypt the values of
these objects when sending them over the network via SNMP.
These are the tables and objects and their sensitivity and
vulnerability:
- Some readable objects in the pktcMtaDevBase, pktcMtaDevServer, and
pktcMtaDevSecurity groups share the potential, if read
maliciously, to facilitate Denial-of-Service (DoS) attacks against
provisioning or Kerberos servers. The object in question are as
follows:
pktcMtaDevServerDhcp1, pktcMtaDevServerDhcp2, and
pktcMtaDevSnmpEntity. The values of these objects may be used to
launch DoS attacks on the Telephony Service Provider DHCP or
Provisioning servers.
pktcMtaDevProvKerbRealmName, pktcMtaDevManufacturerCertificate,
pktcMtaDevCertificate and pktcMtaDevTelephonyRootCertificate. The
values of these objects may be used by attackers to launch DoS
attacks against Kerberos servers.
- One additional readable object may expose some security threats:
pktcMtaDevFQDN. This object may include sensitive information
about the domain name, and potentially, the domain topology.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec),
even then, there is no control as to who on the secure network is
Nechamkin & Mule Standards Track [Page 54]
RFC 4682 IPCDN MTA MIB December 2006
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see Section 8 in [RFC3410]),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
7. IANA Considerations
The MIB module defined in this document uses the following IANA-
assigned OBJECT IDENTIFIER values, recorded in the SMI Numbers
registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
pktcIetfMtaMib { mib-2 140 }
8. Normative References
[RFC868] Postel, J. and K. Harrenstien, "Time Protocol", STD
26, RFC 868, May 1983.
[RFC1350] Sollins, K., "The TFTP Protocol (Revision 2)", STD
33, RFC 1350, July 1992.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2131] Droms, R., "Dynamic Host Configuration Protocol",
RFC 2131, March 1997.
[RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP
Vendor Extensions", RFC 2132, March 1997.
[RFC2287] Krupczak, C. and J. Saperia, "Definitions of
System-Level Managed Objects for Applications", RFC
2287, February 1998.
Nechamkin & Mule Standards Track [Page 55]
RFC 4682 IPCDN MTA MIB December 2006
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder J., Case,
J. Rose, M. and S. Waldbusser, "Structure of
Management Information Version 2 (SMIv2)", STD 58,
RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J. Case,
J. Rose, M. and S. Waldbusser, "Textual Conventions
for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder J., Case,
J., Rose, M. and S. Waldbusser, "Conformance
Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee,
"Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616,
June 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces
Group MIB", RFC 2863, June 2000.
[RFC3280] Housley, R., Polk, W., Ford, W., and D. Solo,
"Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL)
Profile", RFC 3280, April 2002.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network
Management Protocol (SNMP) Management Frameworks",
STD 62, RFC 3411, December 2002.
[RFC3418] Presuhn, R., "Management Information Base (MIB) for
the Simple Network Management Protocol (SNMP)", STD
62, RFC 3418, December 2002.
[RFC3495] Beser, B. and P. Duffy, "Dynamic Host Configuration
Protocol (DHCP) Option for CableLabs Client
Configuration", RFC 3495, March 2003.
[RFC3594] Duffy, P., "PacketCable Security Ticket Control
Sub-Option for the DHCP CableLabs Client
Configuration (CCC) Option", RFC 3594, September
2003.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet
Network Addresses", RFC 4001, February 2005.
Nechamkin & Mule Standards Track [Page 56]
RFC 4682 IPCDN MTA MIB December 2006
[RFC4131] Green, S., Ozawa, K., Cardona, E., and A.
Katsnelson, "Management Information Base for Data
Over Cable Service Interface Specification (DOCSIS)
Cable Modems and Cable Modem Termination Systems for
Baseline Privacy Plus", RFC 4131, September 2005.
[RFC4630] Housley, R. and S. Santesson, "Update to
DirectoryString Processing in the Internet X.509
Public Key Infrastructure Certificate and
Certificate Revocation List (CRL) Profile", RFC
4630, August 2006.
[RFC4639] Woundy, R. and K. Marez, "Cable Device Management
Information Base for Data-Over-Cable Service
Interface Specification (DOCSIS) Compliant Cable
Modems and Cable Modem Termination Systems", RFC
4639, December 2006.
[PKT-SP-PROV] Packetcable MTA Device Provisioning Specification,
Issued, PKT-SP-PROV-I11-050812, August 2005.
http://www.packetcable.com/specifications/
http://www.cablelabs.com/specifications/archives/
[PKT-SP-SEC] PacketCable Security Specification, Issued, PKT-SP-
SEC-I12-050812, August 2005.
http://www.packetcable.com/specifications/
http://www.cablelabs.com/specifications/archives/
[ITU-T-J112] Transmission Systems for Interactive Cable
Television Services, Annex B, J.112, ITU-T, March,
1998.
[ITU-T-J168] IPCablecom Multimedia Terminal Adapter (MTA) MIB
requirements, J.168, ITU-T, March, 2001.
9. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410,
December 2002.
[RFC3617] Lear, E., "Uniform Resource Identifier (URI) Scheme
and Applicability Statement for the Trivial File
Transfer Protocol (TFTP)", RFC 3617, October 2003.
Nechamkin & Mule Standards Track [Page 57]
RFC 4682 IPCDN MTA MIB December 2006
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[PKT-SP-MIB-MTA] Packetcable MTA MIB Specification, Issued, PKT-SP-
MIB-MTA-I10-050812, August 2005.
http://www.packetcable.com/specifications/
http://www.cablelabs.com/specifications/archives/
[ETSITS101909-8] ETSI TS 101 909-8: "Access and Terminals (AT);
Digital Broadband Cable Access to the Public
Telecommunications Network; IP Multimedia Time
Critical Services; Part 8: Media Terminal Adaptor
(MTA) Management Information Base (MIB)".
[EN300001] EN 300 001 V1.5.1 (1998-10):"European Standard
(Telecommunications series) Attachments to Public
Switched Telephone Network (PSTN); General technical
requirements for equipment connected to an analogue
subscriber interface in the PSTN".
[EN300659-1] EN 300 659-1: "Public Switched Telephone Network
(PSTN); Subscriber line protocol over the local loop
for display (and related) services; Part 1: On hook
data transmission".
[NCSSIGMIB] Beacham G., Kumar S., Channabasappa S., "Network
Control Signaling (NCS) Signaling MIB for
PacketCable and IPCablecom Multimedia Terminal
Adapters (MTAs)", Work in Progress, June 2006.
Nechamkin & Mule Standards Track [Page 58]
RFC 4682 IPCDN MTA MIB December 2006
Authors' Addresses
Eugene Nechamkin
Broadcom Corporation,
200 - 13711 International Place
Richmond, BC, V6V 2Z8
CANADA
Phone: +1 604 233 8500
EMail: enechamkin@broadcom.com
Jean-Francois Mule
Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027-9750
U.S.A.
Phone: +1 303 661 9100
EMail: jf.mule@cablelabs.com
Nechamkin & Mule Standards Track [Page 59]
RFC 4682 IPCDN MTA MIB December 2006
Full Copyright Statement
Copyright (C) The IETF Trust (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST,
AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT
THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Nechamkin & Mule Standards Track [Page 60]