💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc5585.txt captured on 2023-05-24 at 20:02:58.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group T. Hansen
Request for Comments: 5585 AT&T Laboratories
Category: Informational D. Crocker
Brandenburg InternetWorking
P. Hallam-Baker
Default Deny Security, Inc.
July 2009
DomainKeys Identified Mail (DKIM) Service Overview
Abstract
This document provides an overview of the DomainKeys Identified Mail
(DKIM) service and describes how it can fit into a messaging service.
It also describes how DKIM relates to other IETF message signature
technologies. It is intended for those who are adopting, developing,
or deploying DKIM. DKIM allows an organization to take
responsibility for transmitting a message, in a way that can be
verified by a recipient. The organization can be the author's, the
originating sending site, an intermediary, or one of their agents. A
message can contain multiple signatures from the same or different
organizations involved with the message. DKIM defines a domain-level
digital signature authentication framework for email, using public-
key cryptography, with the domain name service as its key server
technology (RFC 4871). This permits verification of a responsible
organization, as well as the integrity of the message contents. DKIM
also enables a mechanism that permits potential email signers to
publish information about their email signing practices; this will
permit email receivers to make additional assessments about messages.
DKIM's authentication of email identity can assist in the global
control of "spam" and "phishing".
Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Hansen, et al. Informational [Page 1]
RFC 5585 DKIM Service Overview July 2009
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Table of Contents
1. Introduction ....................................................3
1.1. DKIM's Scope ...............................................4
1.2. Prior Work .................................................5
1.3. Internet Mail Background ...................................6
2. The DKIM Value Proposition ......................................6
2.1. Identity Verification ......................................7
2.2. Enabling Trust Assessments .................................7
2.3. Establishing Message Validity ..............................8
3. DKIM Goals ......................................................8
3.1. Functional Goals ...........................................9
3.2. Operational Goals .........................................10
4. DKIM Function ..................................................12
4.1. Basic Signing .............................................12
4.2. Characteristics of a DKIM Signature .......................12
4.3. The Selector Construct ....................................13
4.4. Verification ..............................................13
4.5. Sub-Domain Assessment .....................................13
5. Service Architecture ...........................................14
5.1. Administration and Maintenance ............................15
5.2. Signing ...................................................16
5.3. Verifying .................................................16
5.4. Unverified or Unsigned Mail ...............................16
5.5. Assessing .................................................17
5.6. DKIM Processing within an ADMD ............................17
6. Considerations .................................................17
6.1. Security Considerations ...................................17
6.2. Acknowledgements ..........................................17
7. Informative References .........................................18
Appendix A. Internet Mail Background .............................20
A.1. Core Model ................................................20
A.2. Trust Boundaries ..........................................20
Index .............................................................22
Hansen, et al. Informational [Page 2]
RFC 5585 DKIM Service Overview July 2009
1. Introduction
This document provides a description of the architecture and
functionality for DomainKeys Identified Mail (DKIM), that is, the
core mechanism for signing and verifying messages. It is intended
for those who are adopting, developing, or deploying DKIM. It will
also be helpful for those who are considering extending DKIM, either
into other areas of use or to support additional features. This
overview does not provide information on threats to DKIM or email or
details on the protocol specifics, which can be found in [RFC4686]
and [RFC4871], respectively. Because the scope of this overview is
restricted to the technical details of signing and verifying using
DKIM, it does not explore operational issues, the details of services
that DKIM uses, or those that, in turn, use DKIM. Nor does it
discuss services that build upon DKIM for enforcement of policies or
assessments. The document assumes a background in basic email and
network security technology and services.
DKIM allows an organization to take responsibility for a message in a
way that can be verified by a recipient. The organization can be a
direct handler of the message, such as the author's, the originating
sending site's, or an intermediary's along the transit path.
However, it can also be an indirect handler, such as an independent
service that is providing assistance to a direct handler. DKIM
defines a domain-level digital signature authentication framework for
email through the use of public-key cryptography and using the domain
name service as its key server technology [RFC4871]. It permits
verification of the signer of a message, as well as the integrity of
its contents. DKIM will also provide a mechanism that permits
potential email signers to publish information about their email
signing practices; this will permit email receivers to make
additional assessments of unsigned messages. DKIM's authentication
of email identity can assist in the global control of "spam" and
"phishing".
Neither this document nor DKIM attempts to provide solutions to the
world's problems with spam, phishing, viruses, worms, joe jobs, etc.
DKIM provides one basic tool, in what needs to be a large arsenal,
for improving basic trust in the Internet mail service. However, by
itself, DKIM is not sufficient to that task and this overview does
not pursue the issues of integrating DKIM into these larger efforts,
beyond a simple reference within a system diagram. Rather, it is a
basic introduction to the technology and its use.
Hansen, et al. Informational [Page 3]
RFC 5585 DKIM Service Overview July 2009
1.1. DKIM's Scope
A person or organization has an "identity" -- that is, a
constellation of characteristics that distinguish them from any other
identity. Associated with this abstraction can be a label used as a
reference, or "identifier". This is the distinction between a thing
and the name of the thing. DKIM uses a domain name as an identifier,
to refer to the identity of a responsible person or organization. In
DKIM, this identifier is called the Signing Domain IDentifier (SDID)
and is contained in the DKIM-Signature header fields "d=" tag. Note
that the same identity can have multiple identifiers.
A DKIM signature can be created by a direct handler of a message,
such as the message's author or by an intermediary. A signature also
can be created by an independent service that is providing assistance
to a handler of the message. Whoever does the signing chooses the
SDID to be used as the basis for later assessments. Hence, the
reputation associated with that domain name might be an additional
basis for evaluating whether to trust the message for delivery. The
owner of the SDID is declaring that they accept responsibility for
the message and can thus be held accountable for it.
DKIM is intended as a value-added feature for email. Mail that is
not signed by DKIM is handled in the same way as it was before DKIM
was defined. The message will be evaluated by established analysis
and filtering techniques. (A signing policy can provide additional
information for that analysis and filtering.) Over time, widespread
DKIM adoption could permit stricter handling of messages that are not
signed. However, early benefits do not require this and probably do
not warrant this.
DKIM has a narrow scope. It is an enabling technology, intended for
use in the larger context of determining message legitimacy. This
larger context is complex, so it is easy to assume that a component
like DKIM, which actually provides only a limited service, instead
satisfies the broader set of requirements.
By itself, a DKIM signature:
o Does not authenticate or verify the contents of the message header
or body, such as the author From field, beyond certifying data
integrity between the time of signing and the time of verifying.
o Does not offer any assertions about the behaviors of the signer.
o Does not prescribe any specific actions for receivers to take upon
successful signature verification.
Hansen, et al. Informational [Page 4]
RFC 5585 DKIM Service Overview July 2009
o Does not provide protection after signature verification.
o Does not protect against re-sending (replay of) a message that
already has a verified signature; therefore, a transit
intermediary or a recipient can re-post the message -- that is,
post it as a new message -- with the original signature remaining
verifiable, even though the new recipient(s) might be different
from those who were originally specified by the author.
1.2. Prior Work
Historically, the IP Address of the system that directly sent the
message -- that is, the previous email "hop" -- has been treated as
an identity to use for making assessments. For example, see
[RFC4408], [RFC4406], and [RFC4407] for some current uses of the
sending system's IP Address. The IP Address is obtained via
underlying Internet information mechanisms and is therefore trusted
to be accurate. Besides having some known security weaknesses, the
use of addresses presents a number of functional and operational
problems. Consequently, there is a widespread desire to use an
identifier that has better correspondence to organizational
boundaries. Domain names can satisfy this need.
There have been four previous IETF Internet Mail signature standards.
Their goals have differed from those of DKIM. PEM and MOSS are only
of historical interest.
o Privacy Enhanced Mail (PEM) was first published in 1987 [RFC0989].
o Pretty Good Privacy (PGP) was developed by Phil Zimmermann and
first released in 1991. A later version was standardized as
OpenPGP [RFC1991] [RFC2440] [RFC3156] [RFC4880].
o PEM eventually transformed into MIME Object Security Services
(MOSS) in 1995 [RFC1848].
o RSA Security independently developed Secure MIME (S/MIME) to
transport a Public Key Cryptographic System (PKCS) #7 data object.
It was standardized as [RFC3851].
Development of both S/MIME and OpenPGP has continued. While each has
achieved a significant user base, neither one has achieved ubiquity
in deployment or use.
To the extent that other message-signing services might have been
adapted to do the job that DKIM is designed to perform, it was felt
that repurposing any of those would be more problematic than creating
Hansen, et al. Informational [Page 5]
RFC 5585 DKIM Service Overview July 2009
a separate service. That said, DKIM only uses cryptographic
components that have a long history, including use within some of
those other messaging security services.
DKIM is differentiated by its reliance on an identifier that is
specific to DKIM use.
DKIM also has a distinctive approach for distributing and vouching
for keys. It uses a key-centric, public-key management scheme,
rather than the more typical approaches based on a certificate in the
styles of Kohnfelder (X.509) [Kohnfelder] or Zimmermann (web of
trust) [WebofTrust]. For DKIM, the owner of the SDID asserts the
validity of a key, rather than having the validity of the key
attested to by a trusted third party, often including other
assertions, such as a quality assessment of the key's owner. DKIM
treats quality assessment as an independent, value-added service,
beyond the initial work of deploying a signature verification
service.
Further, DKIM's key management is provided by adding information
records to the existing Domain Name System (DNS) [RFC1034], rather
than requiring deployment of a new query infrastructure. This
approach has significant operational advantages. First, it avoids
the considerable barrier of creating a new global infrastructure;
hence, it leverages a global base of administrative experience and
highly reliable distributed operation. Second, the technical aspect
of the DNS is already known to be efficient. Any new service would
have to undergo a period of gradual maturation, with potentially
problematic early-stage behaviors. By (re-)using the DNS, DKIM
avoids these growing pains.
1.3. Internet Mail Background
The basic Internet email service has evolved extensively over its
several decades of continuous operation. Its modern architecture
comprises a number of specialized components. A discussion about
Mail User Agents (MUAs), Mail Handling Services (MHSs), Mail Transfer
Agents (MTAs), Mail Submission Agents (MSAs), Mail Delivery Agents
(MDAs), Mail Service Providers (MSPs), Administrative Management
Domains (ADMDs), Mediators, and their relationships can be found in
Appendix A.
2. The DKIM Value Proposition
The nature and origins of a message often are falsely stated. Such
misrepresentations may be employed for legitimate or nefarious
reasons. DKIM provides a foundation for distinguishing legitimate
mail, and thus a means of associating a verifiable identifier with a
Hansen, et al. Informational [Page 6]
RFC 5585 DKIM Service Overview July 2009
message. Given the presence of that identifier, a receiver can make
decisions about further handling of the message, based upon
assessments of the identity that is associated with the identifier.
Receivers who successfully verify a signature can use information
about the signer as part of a program to limit spam, spoofing,
phishing, or other undesirable behaviors. DKIM does not, itself,
prescribe any specific actions by the recipient; rather, it is an
enabling technology for services that do.
These services will typically:
1. Determine a verified identity as taking responsibility for the
message, if possible.
2. Evaluate the trustworthiness of this/these identities.
The role of DKIM is to perform the first of these; DKIM is an enabler
for the second.
2.1. Identity Verification
Consider an attack made against an organization or against customers
of an organization. The name of the organization is linked to
particular Internet domain names (identifiers). Attackers can
leverage using either a legitimate domain name, one without
authorization, or a "cousin" name that is similar to one that is
legitimate, but is not controlled by the target organization. An
assessment service that uses DKIM can differentiate between a domain
(SDID) used by a known organization and a domain used by others. As
such, DKIM performs the positive step of identifying messages
associated with verifiable identities, rather than the negative step
of identifying messages with problematic use of identities. Whether
a verified identity belongs to a Good Actor or a Bad Actor is a
question for later stages of assessment.
2.2. Enabling Trust Assessments
Email receiving services are faced with a basic decision: whether to
accept and deliver a newly arrived message to the indicated
recipient? That is, does the receiving service trust that the
message is sufficiently "safe" to be viewed? For the modern
Internet, most receiving services have an elaborate engine that
formulates this quality assessment. These engines take a variety of
information as input to the decision, such as from reputation lists
and accreditation services. As the engine processes information, it
raises or lowers its trust assessment for the message.
Hansen, et al. Informational [Page 7]
RFC 5585 DKIM Service Overview July 2009
In order to formulate reputation information, an accurate, stable
identifier is needed. Otherwise, the information might not pertain
to the identified organization's own actions. When using an IP
Address, accuracy is based on the belief that the underlying Internet
infrastructure supplies an accurate address. When using domain-based
reputation data, some other form of verification is needed, since it
is not supplied independently by the infrastructure.
DKIM satisfies this requirement by declaring a valid "responsible"
identity -- referenced through the SDID -- about which the engine can
make quality assessments and by using a digital signature to ensure
that use of the identifier is authorized. However, by itself, a
valid DKIM signature neither lowers nor raises the level of trust
associated with the message, but it enables other mechanisms to be
used for doing so.
An organization might build upon its use of DKIM by publishing
information about its Signing Practices (SP). This could permit
detecting some messages that purport to be associated with a domain,
but which are not. As such, an SP can cause the trust assessment to
be reduced, or leave it unchanged.
2.3. Establishing Message Validity
Though man-in-the-middle attacks are historically rare in email, it
is nevertheless theoretically possible for a message to be modified
during transit. An interesting side effect of the cryptographic
method used by DKIM is that it is possible to be certain that a
signed message (or, if l= is used, the signed portion of a message)
has not been modified between the time of signing and the time of
verifying. If it has been changed in any way, then the message will
not be verified successfully with DKIM.
As described above, this validity neither lowers nor raises the level
of trust associated with the message. If it was an untrustworthy
message when initially sent, the verifier can be certain that the
message will be equally untrustworthy upon receipt and successful
verification.
3. DKIM Goals
DKIM adds an end-to-end authentication capability to the existing
email transfer infrastructure. That is, there can be multiple email
relaying hops between signing and verifying. Hence, it defines a
mechanism that only needs to be supported by the signer and the
Hansen, et al. Informational [Page 8]
RFC 5585 DKIM Service Overview July 2009
verifier, rather than any of the functional components along the
handling path. This motivates functional goals about the
authentication itself and operational goals about its integration
with the rest of the Internet email service.
3.1. Functional Goals
3.1.1. Use Domain-Level Granularity for Assurance
DKIM provides accountability at the coarse granularity of an
organization or, perhaps, a department. An existing construct that
enables this granularity is the Domain Name [RFC1034]. DKIM binds a
signing key record to a Domain Name as the SDID. Further benefits of
using domain names include simplifying key management, enabling
signing by the infrastructure as opposed to the MUA, and reducing
privacy concerns.
Contrast this with OpenPGP and S/MIME, which associate verification
with individual authors, using their full email addresses.
3.1.2. Implementation Locality
Any party, anywhere along the transit path, can implement DKIM
signing. Its use is not confined to particular systems, such as the
author's MUA or the inbound boundary MTA, and there can be more than
one signature per message.
3.1.3. Allow Delegation of Signing to Independent Parties
Different parties have different roles in the process of email
exchange. Some are easily visible to end users and others are
primarily visible to operators of the service. DKIM was designed to
support signing by any of these different parties and to permit them
to sign with any domain name that they deem appropriate (and for
which they hold authorized signing keys). As an example, an
organization that creates email content often delegates portions of
its processing or transmission to an outsourced group. DKIM supports
this mode of activity, in a manner that is not normally visible to
end users. Similarly, a reputation provider can delegate a signing
key for a domain under the control of the provider, to be used by an
organization for which the provider is prepared to vouch.
3.1.4. Distinguish the Core Authentication Mechanism from Its
Derivative Uses
An authenticated identity can be subject to a variety of assessment
policies, either ad hoc or standardized. DKIM separates basic
authentication from assessment. The only semantics inherent to a
Hansen, et al. Informational [Page 9]
RFC 5585 DKIM Service Overview July 2009
DKIM signature are that the signer is asserting some kind of
responsibility for the message. Any interpretation of this kind of
responsibility is the job of services building on DKIM, but the
details are beyond the scope of that core. One such mechanism might
assert a relationship between the SDID and the author, as specified
in the rfc5322.From: header field's domain identity. Another might
specify how to treat an unsigned message with that rfc5322.From:
field domain.
3.1.5. Retain Ability to Have Anonymous Email
The ability to send a message that does not identify its author is
considered to be a valuable quality of the current email service that
needs to be retained. DKIM is compatible with this goal since it
permits authentication of the email system operator, rather than the
content author. If it is possible to obtain effectively anonymous
accounts at example.com, knowing that a message definitely came from
example.com does not threaten the anonymity of the user who authored
it.
3.2. Operational Goals
3.2.1. Make Presence of Signature Transparent to Non-Supporting
Recipients
In order to facilitate incremental adoption, DKIM is designed to be
transparent to recipients that do not support it. A DKIM signature
does not "get in the way" for such recipients.
Contrast this with S/MIME and OpenPGP, which modify the message body.
Hence, their presence is potentially visible to email recipients,
whose user software needs to process the associated constructs.
3.2.2. Treat Verification Failure the Same as No Signature Present
DKIM must also be transparent to existing assessment mechanisms.
Consequently, a DKIM signature verifier is to treat messages with
signatures that fail as if they were unsigned. Hence, the message
will revert to normal handling, through the receiver's existing
filtering mechanisms. Thus, DKIM specifies that an assessing site is
not to take a message that has a broken signature and treat it any
differently than if the signature weren't there.
Contrast this with OpenPGP and S/MIME, which were designed for strong
cryptographic protection. This included treating verification
failure as message failure.
Hansen, et al. Informational [Page 10]
RFC 5585 DKIM Service Overview July 2009
3.2.3. Permit Incremental Adoption for Incremental Benefit
DKIM can be used by any two organizations that exchange email and
implement DKIM; it does not require adoption within the open
Internet's email infrastructure. In the usual manner of "network
effects", the benefits of DKIM increase as its adoption increases.
Although this mechanism can be used in association with independent
assessment services, such services are not essential in order to
obtain initial benefit. For example, DKIM allows (possibly large)
pairwise sets of email providers and spam filtering companies to
distinguish mail that is associated with a known organization, versus
mail that might deceptively purport to have the affiliation. This in
turn allows the development of "whitelist" schemes whereby
authenticated mail from a known source with good reputation is
allowed to bypass some anti-abuse filters.
In effect, the email receiver can use their set of known
relationships to generate their own reputation data. This works
particularly well for traffic between large sending providers and
large receiving providers. However, it also works well for any
operator, public or private, that has mail traffic dominated by
exchanges among a stable set of organizations.
Management of email delivery problems currently represents a
significant pain point for email administrators at every point on the
mail transit path. Administrators who have deployed DKIM
verification have an incentive to encourage senders (who might
subsequently complain that their email is not being delivered) to use
DKIM signatures.
3.2.4. Minimize the Amount of Required Infrastructure
In order to allow early adopters to gain early benefit, DKIM makes no
changes to the core Internet Mail service and, instead, can provide a
useful benefit for any individual pair of signers and verifiers who
are exchanging mail. Similarly, DKIM's reliance on the Domain Name
System greatly reduces the amount of new administrative
infrastructure that is needed across the open Internet.
3.2.5. Permit a Wide Range of Deployment Choices
DKIM can be deployed at a variety of places within an organization's
email service. This affords flexibility in terms of who administers
its use, as well as what traffic carries a DKIM signature. For
example, employing DKIM at an outbound boundary MTA will mean that it
is administered by the organization's central IT department and that
internal messages are not signed.
Hansen, et al. Informational [Page 11]
RFC 5585 DKIM Service Overview July 2009
4. DKIM Function
DKIM has a very constrained set of capabilities, primarily targeting
email while it is in transit from an author to a set of recipients.
It associates verifiable information with a message, especially a
responsible identity. When a message does not have a valid signature
associated with the author, a DKIM SP will permit the domain name of
the author to be used for obtaining information about their signing
practices.
4.1. Basic Signing
With the DKIM signature mechanism, a signer chooses an SDID, performs
digital signing on the message, and adds the signature information
using a DKIM header field. A verifier obtains the domain name and
the "selector" from the DKIM header field, obtains the public key
associated with the name, and verifies the signature.
DKIM permits any domain name to be used as the SDID, and supports
extensible choices for various algorithms. As is typical for
Internet standards, there is a core set of algorithms that all
implementations are required to support, in order to guarantee basic
interoperability.
DKIM permits restricting the use of a signature key to signing
messages for particular types of services, such as only for a single
source of email. This is intended to be helpful when delegating
signing authority, such as to a particular department or to a third-
party outsourcing service.
With DKIM, the signer explicitly lists the headers that are signed,
such as From:, Date:, and Subject:. By choosing the minimal set of
headers needed, the signature is likely to be considerably more
robust against the handling vagaries of intermediary MTAs.
4.2. Characteristics of a DKIM Signature
A DKIM signature applies to the message body and selected header
fields. The signer computes a hash of the selected header fields and
another hash of the body. The signer then uses a private key to
cryptographically encode this information, along with other signing
parameters. Signature information is placed into DKIM-Signature:, a
new [RFC5322] message header field.
Hansen, et al. Informational [Page 12]
RFC 5585 DKIM Service Overview July 2009
4.3. The Selector Construct
The key for a signature is associated with an SDID. That domain name
provides the complete identity used for making assessments about the
signer. (The DKIM specification does not give any guidance on how to
do an assessment.) However, this name is not sufficient for making a
DNS query to obtain the key needed to verify the signature.
A single SDID can have multiple signing keys and/or multiple
potential signers. To support this, DKIM identifies a particular
signature as using a combination of the SDID and an added field,
called the "selector", specified in a separate DKIM-Signature: header
field parameter.
NOTE: The semantics of the selector (if any) are strictly reserved
to the signer and is to be treated as an opaque string by all
other parties. If verifiers were to employ the selector as part
of an assessment mechanism, then there would be no remaining
mechanism for making a transition from an old, or compromised, key
to a new one.
4.4. Verification
After a message has been signed, any agent in the message transit
path can verify the signature to determine that the owner of the SDID
took responsibility for the message. Message recipients can verify
the signature by querying the DNS for the signer's domain directly,
to retrieve the appropriate public key, and thereby confirm that the
message was signed by a party in possession of the private key for
the SDID. Typically, verification will be done by an agent in the
Administrative Management Domain (ADMD) of the message recipient.
4.5. Sub-Domain Assessment
Signers often need to support multiple assessments about their
organization, such as to distinguish one type of message from
another, or one portion of the organization from another. To permit
assessments that are independent, one method is for an organization
to use different sub-domains as the SDID tag, such as
"transaction.example.com" versus "newsletter.example.com", or
"productA.example.com" versus "productB.example.com". These can be
entirely separate from the rfc5322.From header field domain.
Hansen, et al. Informational [Page 13]
RFC 5585 DKIM Service Overview July 2009
5. Service Architecture
DKIM uses external service components, such as for key retrieval and
relaying email. This specification defines an initial set, using DNS
and SMTP, for basic interoperability.
|
|- RFC5322 Message
V
+--------+ +--------------------------------+
| Private| | ORIGINATING OR RELAYING ADMD |
| Key +...>| Sign Message with SDID |
| Store | +---------------+----------------+
+--------+ |
(paired) [Internet]
+--------+ | +-----------+
| Public | +--------------------------------+ | Remote |
| Key | | RELAYING OR DELIVERING ADMD | | Sender |
| Store | | Message Signed? | | Practices |
+----+---+ +-----+--------------------+-----+ +-----+-----+
. |yes |no .
. V | .
. +-------------+ | .
+.......>| Verify +--------+ | .
| Signature | | | .
+------+------+ | | .
pass| fail| | .
V | | .
+-------------+ | | .
| | | | .
+.......>| Assessments | | | .
. | | V V .
. +-----+--+----+ +-------+ .
. | | / Check \<............+
. | +-------->/ Signing \
. | / Practices \<..........+
. | +-------+-------+ .
. | | .
. | V .
+----+--------+ | +-----------+ +------+-----+
|Reputation/ | | | Message | | Local Info |
|Accreditation| +----------->| Filtering | | on Sender |
|Info | | Engine | | Practices |
+-------------+ +-----------+ +------------+
Figure 1: DKIM Service Architecture
Hansen, et al. Informational [Page 14]
RFC 5585 DKIM Service Overview July 2009
As shown in Figure 1, basic message processing is divided between a
signing Administrative Management Domain (ADMD) and a verifying ADMD.
At its simplest, this is between the originating ADMD and the
delivering ADMD, but can involve other ADMDs in the handling path.
signing: Signing is performed by an authorized module within the
signing ADMD and uses private information from the Key Store, as
discussed below. Within the originating ADMD, this might be
performed by the MUA, MSA, or an MTA.
verifying: verifying is performed by an authorized module within
the verifying ADMD. Within a delivering ADMD, verifying might be
performed by an MTA, MDA, or MUA. The module verifies the
signature or determines whether a particular signature was
required. Verifying the signature uses public information from
the Key Store. If the signature passes, reputation information is
used to assess the signer and that information is passed to the
message filtering system. If the signature fails or there is no
signature using the author's domain, information about signing
practices related to the author can be retrieved remotely and/or
locally, and that information is passed to the message filtering
system.
If a message has more than one valid signature, the order in which
the signers are assessed and the interactions among the assessments
are not defined by the DKIM specification.
5.1. Administration and Maintenance
A number of tables and services are used to provide external
information. Each of these introduces administration and maintenance
requirements.
Key Store: DKIM uses public-/private-key (asymmetric) cryptography.
The signer users a private key and the verifier uses the
corresponding public key. The current DKIM Signing specification
provides for querying the Domain Names Service (DNS), to permit a
verifier to obtain the public key. The signing organization
therefore needs to have a means of adding a key to the DNS, for
every selector/SDID combination. Further, the signing
organization needs policies for distributing and revising keys.
Reputation/Accreditation: If a message contains a valid signature,
then the verifier can evaluate the associated domain name's
reputation, in order to determine appropriate delivery or display
options for that message. Quality assessment information, which
Hansen, et al. Informational [Page 15]
RFC 5585 DKIM Service Overview July 2009
is associated with a domain name, comes in many forms and from
many sources. DKIM does not define assessment services. Its
relevance to them is to provide a verified domain name, upon which
assessments can be made.
Signing Practices (SP): Separate from determining the validity of a
signature, and separate from assessing the reputation of the
organization that is associated with the signed identity, there is
an opportunity to determine any organizational practices
concerning a domain name. Practices can range widely. They can
be published by the owner of the domain or they can be maintained
by the evaluating site. They can pertain to the use of the domain
name, such as whether it is used for signing messages, whether all
mail having that domain name in the author rfc5322.From: header
field is signed, or even whether the domain owner recommends
discarding messages in the absence of an appropriate signature.
The statements of practice are made at the level of a domain name,
and are distinct from assessments made about particular messages,
as occur in a Message Filtering Engine. Such assessments of
practices can provide useful input for the Message Filtering
Engine's determination of message handling. As practices are
defined, each domain name owner needs to consider what information
to publish. The nature and degree of checking practices, if any
are performed, is optional to the evaluating site and is strictly
a matter of local policy.
5.2. Signing
Signing can be performed by a component of the ADMD that creates the
message, and/or within any ADMD along the relay path. The signer
uses the appropriate private key that is associated with the SDID.
5.3. Verifying
Verification can be performed by any functional component along the
relay and delivery path. Verifiers retrieve the public key based
upon the parameters stored in the message.
5.4. Unverified or Unsigned Mail
Messages lacking a valid author signature (a signature associated
with the author of the message as opposed to a signature associated
with an intermediary) can prompt a query for any published "signing
practices" information, as an aid in determining whether the author
information has been used without authorization.
Hansen, et al. Informational [Page 16]
RFC 5585 DKIM Service Overview July 2009
5.5. Assessing
Figure 1 shows the verified identity as being used to assess an
associated reputation, but it could be applied to other tasks, such
as management tracking of mail. Local policy guidelines may cause
signing practices to be checked or the message may be sent directly
to the message Filtering Engine.
A popular use of reputation information is as input to a Filtering
Engine that decides whether to deliver -- and possibly whether to
specially mark -- a message. Filtering Engines have become complex
and sophisticated. Their details are outside of the scope of DKIM,
other than the expectation that the verified identity produced by
DKIM can accumulate its own reputation, and will be added to the
varied soup of rules used by the engines. The rules can cover signed
messages and can deal with unsigned messages from a domain, if the
domain has published information about its practices.
5.6. DKIM Processing within an ADMD
It is expected that the most common venue for a DKIM implementation
will be within the infrastructures of the authoring organization's
outbound service and the receiving organization's inbound service,
such as a department or a boundary MTA. DKIM can be implemented in
an author's or recipient's MUA, but this is expected to be less
typical, since it has higher administration and support costs.
A Mediator is an MUA that receives a message and can repost a
modified version of it, such as to a mailing list. A DKIM signature
can survive some types of modifications through this process.
Furthermore, the Mediator can add its own signature. This can be
added by the Mediator software itself, or by any outbound component
in the Mediator's ADMD.
6. Considerations
6.1. Security Considerations
The security considerations of the DKIM protocol are described in the
DKIM base specification [RFC4871], with [RFC4686] as their basis.
6.2. Acknowledgements
Many people contributed to the development of the DomainKeys
Identified Mail and the effort of the DKIM Working Group is
gratefully acknowledged. In particular, we would like to thank Jim
Fenton for his extensive feedback diligently provided on every
version of this document.
Hansen, et al. Informational [Page 17]
RFC 5585 DKIM Service Overview July 2009
7. Informative References
[Kohnfelder] Kohnfelder, L., "Towards a Practical Public-key
Cryptosystem", May 1978.
[RFC0989] Linn, J. and IAB Privacy Task Force, "Privacy
enhancement for Internet electronic mail: Part I:
Message encipherment and authentication procedures",
RFC 989, February 1987.
[RFC1034] Mockapetris, P., "Domain names - concepts and
facilities", STD 13, RFC 1034, November 1987.
[RFC1113] Linn, J., "Privacy enhancement for Internet electronic
mail: Part I - message encipherment and authentication
procedures", RFC 1113, August 1989.
[RFC1848] Crocker, S., Galvin, J., Murphy, S., and N. Freed,
"MIME Object Security Services", RFC 1848,
October 1995.
[RFC1991] Atkins, D., Stallings, W., and P. Zimmermann, "PGP
Message Exchange Formats", RFC 1991, August 1996.
[RFC2440] Callas, J., Donnerhacke, L., Finney, H., and R. Thayer,
"OpenPGP Message Format", RFC 2440, November 1998.
[RFC3156] Elkins, M., Del Torto, D., Levien, R., and T. Roessler,
"MIME Security with OpenPGP", RFC 3156, August 2001.
[RFC3851] Ramsdell, B., "Secure/Multipurpose Internet Mail
Extensions (S/MIME) Version 3.1 Message Specification",
RFC 3851, July 2004.
[RFC4406] Lyon, J. and M. Wong, "Sender ID: Authenticating
E-Mail", RFC 4406, April 2006.
[RFC4407] Lyon, J., "Purported Responsible Address in E-Mail
Messages", RFC 4407, April 2006.
[RFC4408] Wong, M. and W. Schlitt, "Sender Policy Framework (SPF)
for Authorizing Use of Domains in E-Mail, Version 1",
RFC 4408, April 2006.
[RFC4686] Fenton, J., "Analysis of Threats Motivating DomainKeys
Identified Mail (DKIM)", RFC 4686, September 2006.
Hansen, et al. Informational [Page 18]
RFC 5585 DKIM Service Overview July 2009
[RFC4871] Allman, E., Callas, J., Delany, M., Libbey, M., Fenton,
J., and M. Thomas, "DomainKeys Identified Mail (DKIM)
Signatures", RFC 4871, May 2007.
[RFC4880] Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and
R. Thayer, "OpenPGP Message Format", RFC 4880,
November 2007.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
October 2008.
[WebofTrust] Network Associates, Inc. and its Affiliated Companies,
"How PGP works, in Introduction to Cryptography", 1999,
<http://www.pgpi.org/doc/pgpintro/>.
Hansen, et al. Informational [Page 19]
RFC 5585 DKIM Service Overview July 2009
Appendix A. Internet Mail Background
A.1. Core Model
Internet Mail is split between the user world, in the form of Mail
User Agents (MUA), and the transmission world, in the form of the
Mail Handling Service (MHS) composed of Mail Transfer Agents (MTA).
The MHS is responsible for accepting a message from one user, the
author, and delivering it to one or more other users, the recipients.
This creates a virtual MUA-to-MUA exchange environment. The first
component of the MHS is called the Mail Submission Agent (MSA) and
the last is called the Mail Delivery Agent (MDA).
An email Mediator is both an inbound MDA and outbound MSA. It takes
delivery of a message, makes changes appropriate to its service, and
then reposts it for further distribution. Typically, the new message
will retain the original rfc5322.From: header field. A mailing list
is a common example of a Mediator.
The modern Internet Mail service is marked by many independent
operators, many different components for providing users with service
and many other components for performing message transfer.
Consequently, it is necessary to distinguish administrative
boundaries that surround sets of functional components, which are
subject to coherent operational policies.
As elaborated on below, every MSA is a candidate for signing using
DKIM, and every MDA is a candidate for doing DKIM verification.
A.2. Trust Boundaries
Operation of Internet Mail services is apportioned to different
providers (or operators). Each can be composed of an independent
ADministrative Management Domain (ADMD). An ADMD operates with an
independent set of policies and interacts with other ADMDs according
to differing types and amounts of trust. Examples include an end
user operating a desktop client that connects to an independent email
service, a department operating a submission agent or a local Relay,
an organization's IT group that operates enterprise Relays, and an
ISP operating a public shared email service.
Each of these can be configured into many combinations of
administrative and operational relationships, with each ADMD
potentially having a complex arrangement of functional components.
Figure 2 depicts the relationships among ADMDs. Perhaps the most
salient aspect of an ADMD is the differential trust that determines
its policies for activities within the ADMD, versus those involving
interactions with other ADMDs.
Hansen, et al. Informational [Page 20]
RFC 5585 DKIM Service Overview July 2009
Basic types of ADMDs include:
Edge: Independent transfer services, in networks at the edge of
the Internet Mail service.
User: End-user services. These might be subsumed under an Edge
service, such as is common for web-based email access.
Transit: These are Mail Service Providers (MSP) offering value-
added capabilities for Edge ADMDs, such as aggregation and
filtering.
Note that Transit services are quite different from packet-level
transit operation. Whereas end-to-end packet transfers usually go
through intermediate routers, email exchange across the open Internet
often is directly between the Edge ADMDs, at the email level.
+--------+ +--------+ +--------+
| ADMD#1 | | ADMD#3 | | ADMD#4 |
| ------ | | ------ | | ------ |
| | +----------------------->| | | |
| User | | |--Edge--+--->|--User |
| | | | +--->| | | |
| V | | | +--------+ +--------+
| Edge---+---+ |
| | | +----------+ |
+--------+ | | ADMD#2 | |
| | ------ | |
| | | |
+--->|-Transit--+---+
| |
+----------+
Figure 2: ADministrative Management Domains (ADMD) Example
In Figure 2, ADMD numbers 1 and 2 are candidates for doing DKIM
signing, and ADMD numbers 2, 3, and 4 are candidates for doing DKIM
verification.
The distinction between Transit network and Edge network transfer
services is primarily significant because it highlights the need for
Hansen, et al. Informational [Page 21]
RFC 5585 DKIM Service Overview July 2009
concern over interaction and protection between independent
administrations. The interactions between functional components
within a single ADMD are subject to the policies of that domain.
Although any pair of ADMDs can arrange for whatever policies they
wish, Internet Mail is designed to permit inter-operation without
prior arrangement.
Common ADMD examples are:
Enterprise Service Providers:
Operators of an organization's internal data and/or mail
services.
Internet Service Providers:
Operators of underlying data communication services that, in
turn, are used by one or more Relays and Users. It is not
necessarily their job to perform email functions, but they
can, instead, provide an environment in which those
functions can be performed.
Mail Service Providers:
Operators of email services, such as for end users, or
mailing lists.
Index
A
ADMD 6
Administrative Management Domain 6
assessment 7
D
DKIM-Signature 12-13
DNS 6, 13-15
I
identifier 4-8
identity 3-7, 9, 12
infrastructure 5-6, 8-11, 17
M
Mail Delivery Agent 6
Mail Handling Service 6
Mail Service Provider 6
Mail Submission Agent 6
Hansen, et al. Informational [Page 22]
RFC 5585 DKIM Service Overview July 2009
Mail Transfer Agent 6
Mail User Agent 6
MDA 6
MHS 6
MIME Object Security Services 5
MOSS 5
MSA 6
MSP 6
MTA 6
MUA 6
O
OpenPGP 5
P
PEM 5
PGP 5
Pretty Good Privacy 5
Privacy Enhanced Mail 5
S
S/MIME 5
T
trust 3, 7-8, 20
V
verification 4, 7-8, 10-11, 13, 16, 20-21
W
Web of Trust 6
X
X.509 6
Hansen, et al. Informational [Page 23]
RFC 5585 DKIM Service Overview July 2009
Authors' Addresses
Tony Hansen
AT&T Laboratories
200 Laurel Ave.
Middletown, NJ 07748
USA
EMail: tony+dkimov@maillennium.att.com
Dave Crocker
Brandenburg InternetWorking
675 Spruce Dr.
Sunnyvale, CA 94086
USA
EMail: dcrocker@bbiw.net
Phillip Hallam-Baker
Default Deny Security, Inc.
EMail: phillip@hallambaker.com
Hansen, et al. Informational [Page 24]