💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc5429.txt captured on 2023-05-24 at 20:05:52.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group A. Stone, Ed.
Request for Comments: 5429 Serendipity
Obsoletes: 3028 March 2009
Updates: 5228
Category: Standards Track
Sieve Email Filtering: Reject and Extended Reject Extensions
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Abstract
This memo updates the definition of the Sieve mail filtering language
"reject" extension, originally defined in RFC 3028.
A "Joe-job" is a spam run forged to appear as though it came from an
innocent party, who is then generally flooded by automated bounces,
Message Disposition Notifications (MDNs), and personal messages with
Stone Standards Track [Page 1]
RFC 5429 Sieve Extension: Reject March 2009
complaints. The original Sieve "reject" action defined in RFC 3028
required use of MDNs for rejecting messages, thus contributing to the
flood of Joe-job spam to victims of Joe-jobs.
This memo updates the definition of the "reject" action to allow
messages to be refused during the SMTP transaction, and defines the
"ereject" action to require messages to be refused during the SMTP
transaction, if possible.
The "ereject" action is intended to replace the "reject" action
wherever possible. The "ereject" action is similar to "reject", but
will always favor protocol-level message rejection.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Conventions Used in This Document . . . . . . . . . . . . 3
2. Sieve "reject" and "ereject" Extensions . . . . . . . . . . . 4
2.1. Action ereject . . . . . . . . . . . . . . . . . . . . . . 4
2.1.1. Rejecting a Message at the SMTP/LMTP Protocol Level . 5
2.1.2. Rejecting a Message by Sending a DSN . . . . . . . . . 5
2.2. Action reject . . . . . . . . . . . . . . . . . . . . . . 6
2.2.1. Rejecting a Message by Sending an MDN . . . . . . . . 7
2.3. Silent Upgrade from "reject" to "ereject" . . . . . . . . 8
2.4. Compatibility with Other Actions . . . . . . . . . . . . . 9
2.5. Details of Protocol-Level Refusal . . . . . . . . . . . . 9
3. Changes from RFC 3028 . . . . . . . . . . . . . . . . . . . . 11
4. Security Considerations . . . . . . . . . . . . . . . . . . . 11
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11
5.1. "reject" Extension Registration . . . . . . . . . . . . . 11
5.2. "ereject" Extension Registration . . . . . . . . . . . . . 12
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.1. Normative References . . . . . . . . . . . . . . . . . . . 12
6.2. Informative References . . . . . . . . . . . . . . . . . . 13
Appendix A. Acknowledgements . . . . . . . . . . . . . . . . . . 14
Appendix B. Contributors . . . . . . . . . . . . . . . . . . . . 14
Stone Standards Track [Page 2]
RFC 5429 Sieve Extension: Reject March 2009
1. Introduction
The Sieve mail filtering language, as originally defined in RFC 3028
[RFC3028], specified that the "reject" action shall discard a message
and send a Message Disposition Notification [MDN] to the envelope
sender along with an explanatory message. The Sieve mail filtering
language, as updated in RFC 5228 [SIEVE], does not define any
"reject" action, hence that is the purpose of this document.
This document updates the definition of the "reject" action to permit
refusal of the message during the SMTP transaction, if possible, and
defines a new "ereject" action to require refusal of the message
during the SMTP transaction, if possible.
An important goal of this document is to reduce the risk of Sieve
scripts being used to perpetrate "Joe-job" spam runs, where the MDN
is sent notifying the sender of a message of its non-delivery is in
fact sent to an innocent third-party. The original Sieve "reject"
action defined in RFC 3028 required use of MDNs for rejecting
messages, thus contributing to the flood of Joe-job spam to victims
of Joe-jobs. By rejecting the message at the protocol level, it is
less likely that an MDN will be needed, and thus less likely that an
MDN will be misdirected at an innocent third-party.
Implementations are further encouraged to use spam-detection systems
to determine the level of risk associated with sending an MDN, and
this document allows implementations to silently drop the MDN if the
rejected message is deemed likely to be spam.
This document also describes how to use "reject"/"ereject" at varying
points in the email stack: Mail Transfer Agent (MTA), Mail Delivery
Agent (MDA), and Mail User Agent (MUA). See [EMAIL-ARCH] for a
comprehensive discussion of these environments.
In general, an MDN is generated by an MUA, and can be used to
indicate the status of a message with respect to its recipient, while
a Delivery Status Notification (DSN) [DSN] is generated by an MTA,
and can be used to indicate whether or not a message was received and
delivered by the mail system.
Further discussion highlighting the risks of generating MDNs and the
benefits of protocol-level refusal can be found in [Joe-DoS].
1.1. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [KEYWORDS].
Stone Standards Track [Page 3]
RFC 5429 Sieve Extension: Reject March 2009
Conventions for notations are as in Section 1.1 of RFC 5228 [SIEVE].
This document does not attempt to define spam or how it should be
identified, nor does it attempt to define an email virus or how it
should be detected. Implementors are advised to follow best
practices and keep abreast of current research in these fields.
2. Sieve "reject" and "ereject" Extensions
2.1. Action ereject
Usage: ereject <reason: string>
Sieve implementations that implement the "ereject" action must use
the "ereject" capability string.
The "ereject" action cancels the implicit keep and refuses delivery
of a message. The "reason" string is a UTF-8 [UTF-8] string
specifying the reason for refusal. How a message is refused depends
on the capabilities of the mail component (MDA or MTA) executing the
Sieve script. The Sieve interpreter MUST carry out one of the
following actions (listed in order from most to least preferred),
MUST carry out the most preferable action possible, and MUST fall
back to lesser actions if a preferred action fails.
1. Refuse message delivery by sending a 5XX response code over SMTP
[SMTP] or Local Mail Transfer Protocol (LMTP) [LMTP]. See
Section 2.1.1 for more details.
2. Send a non-delivery report to the envelope sender ([REPORT]
[DSN]), unless the envelope sender address is determined to be a
forged or otherwise invalid address.
Note that the determination of whether or not an envelope sender is a
forgery may be performed by site-specific and implementation-specific
heuristic techniques, such as "return-path verification", details of
which are outside the scope of this document. Implementations SHOULD
log instances when a non-delivery report is not sent and the reason
for not sending the report (e.g., content was spam, return-path
invalid, etc.).
The "ereject" action MUST NOT be available in environments that do
not support protocol-level rejection, e.g., an MUA, and MUST be
available in all other environments that support the "reject" action.
Stone Standards Track [Page 4]
RFC 5429 Sieve Extension: Reject March 2009
Example:
require ["ereject"];
if address "from" "someone@example.com" {
ereject "I no longer accept mail from this address";
}
2.1.1. Rejecting a Message at the SMTP/LMTP Protocol Level
Sieve implementations that are able to reject messages at the SMTP/
LMTP level MUST do so and SHOULD use the 550 response code. Note
that if a message is arriving over SMTP and has multiple recipients,
some of whom have accepted the message, Section 2.1.2 defines how to
reject such a message.
The risk that these actions will generate blowback spam are minimized
but cannot be eliminated completely even in the case of "ereject", so
caution is advised when using these actions to deal with messages
determined to be spam.
Note that SMTP [SMTP] does not allow non-US-ACSII characters in the
SMTP response text. If non-US-ACSII characters appear in the
"reason" string, they can be sent at the protocol level if and only
if the client and the server use an SMTP extension that allows for
transmission of non-US-ACSII reply text. (One example of such an
SMTP extension is described in [UTF8-RESP].) In the absence of such
an SMTP extension, the Sieve engine MUST replace any "reason" string
being sent at the protocol level and containing non-US-ACSII
characters with an implementation-defined US-ACSII-only string.
Users who don't like this behavior should consider using the "reject"
action described in Section 2.2, if available.
See Section 2.5 for the detailed instructions about performing
protocol-level rejection.
2.1.2. Rejecting a Message by Sending a DSN
An implementation may receive a message via SMTP that has more than
one RCPT TO that has been accepted by the server, and at least one
but not all of them are refusing delivery (whether the refusal is
caused by a Sieve "ereject" action or for some other reason). In
this case, the server MUST accept the message and generate DSNs for
all recipients that are refusing it. Note that this exception does
not apply to LMTP, as LMTP is able to reject messages on a per-
recipient basis. (However, the LMTP client may then have no choice
but to generate a DSN to report the error, which may result in
blowback spam.)
Stone Standards Track [Page 5]
RFC 5429 Sieve Extension: Reject March 2009
Note that according to [DSN], Delivery Status Notifications MUST NOT
be generated if the MAIL FROM (or Return-Path) is empty.
The DSN message MUST follow the requirements of [DSN] and [REPORT].
The action-value field defined in [DSN], Section 2.3.3, MUST contain
the value "failed". The human-readable portion of the non-delivery
report MUST contain the "reason" string from the "ereject" action and
SHOULD contain additional text alerting the apparent original sender
that the message was refused by an email filter. This part of the
report might appear as follows:
------------------------------------------------------------
Your message was refused by the recipient's mail filtering program.
The reason given is as follows:
I am not taking mail from you, and I don't want your birdseed,
either!
------------------------------------------------------------
2.2. Action reject
This section updates the definition of the "reject" action in Section
4.1 of RFC 3028 [RFC3028] and is an optional extension to [SIEVE].
Usage: reject <reason: string>
Sieve implementations that implement the "reject" action must use the
"reject" capability string.
The "reject" action cancels the implicit keep and refuses delivery of
a message. The "reason" string is a UTF-8 [UTF-8] string specifying
the reason for refusal. Unlike the "ereject" action described above,
this action would always favor preserving the exact text of the
refusal reason. Typically, the "reject" action refuses delivery of a
message by sending back an MDN to the sender (see Section 2.2.1).
However, implementations MAY refuse delivery over SMTP/LMTP protocol
(as detailed in Section 2.5), if and only if all of the following
conditions are true:
1. The "reason" string consists of only US-ASCII characters
or
The "reason" string contains non-US-ASCII and both the client and
server support and negotiate use of an SMTP/LMTP extension for
sending UTF-8 responses.
Stone Standards Track [Page 6]
RFC 5429 Sieve Extension: Reject March 2009
2. LMTP protocol is used
or
SMTP protocol is used and the message has a single recipient
or
SMTP protocol is used, the message has multiple recipients, and
all of them refused message delivery (whether or not Sieve is
being used).
Example:
require ["reject"];
if size :over 100K {
reject text:
Your message is too big. If you want to send me a big attachment,
put it on a public web site and send me a URL.
.
;
}
(Pretend that the "reason" string above contains some non-US-ACSII
text.)
Implementations may use techniques as described in Section 2.1 to
determine if a non-delivery report should not be sent to a forged
sender. Implementations SHOULD log instances when a non-delivery
report is not sent and the reason for not sending the report.
2.2.1. Rejecting a Message by Sending an MDN
The "reject" action resends the received message to the envelope
sender specified by the MAIL FROM (or Return-Path) address, wrapping
it in a "reject" form, explaining that it was rejected by the
recipient.
Note that according to [MDN], Message Disposition Notifications MUST
NOT be generated if the MAIL FROM (or Return-Path) is empty.
A reject message MUST take the form of a failure MDN as specified by
[MDN]. The human-readable portion of the message, the first
component of the MDN, contains the human-readable message describing
the error, and it SHOULD contain additional text alerting the
apparent original sender that mail was refused by an email filter.
The MDN disposition-field as defined in the MDN specification MUST be
"deleted" and MUST have the "MDN-sent-automatically" and "automatic-
action" modes set (see Section 3.2.6 of [MDN]).
Stone Standards Track [Page 7]
RFC 5429 Sieve Extension: Reject March 2009
In the following script, a message is rejected and returned to the
sender.
Example:
require ["reject"];
if header :contains "from" "coyote@desert.example.org" {
reject text:
I am not taking mail from you, and I don't
want your birdseed, either!
.
;
}
For this script, the first part of the MDN might appear as follows:
------------------------------------------------------------
The message was refused by the recipient's mail filtering program.
The reason given was as follows:
I am not taking mail from you, and I don't want your birdseed,
either!
------------------------------------------------------------
2.3. Silent Upgrade from "reject" to "ereject"
Implementations MUST NOT silently upgrade "reject" actions to
"ereject" actions in a Sieve script because this might lead to
unpleasant changes of behavior not expected by the script owner.
User interfaces that present a generic rejection option, and generate
Sieve script output, MAY switch from generating "reject" to "ereject"
actions, so long as doing so does not create a confusing change for
the script owner.
Script generators SHOULD ensure that a rejection action being
executed as a result of an anti-spam/anti-virus positive test be done
using the "ereject" action, as it is more suitable for such
rejections.
Script generators MAY automatically upgrade scripts that previously
used the "reject" action for anti-spam/anti-virus related rejections.
Note that such generators MUST make sure that the target environment
can support the "ereject" action.
Stone Standards Track [Page 8]
RFC 5429 Sieve Extension: Reject March 2009
2.4. Compatibility with Other Actions
This section applies equally to "reject" and "ereject" actions. All
references to the "reject" action in this section can be replaced
with the "ereject" action.
A "reject" action cancels the implicit keep.
Implementations MUST prohibit the execution of more than one "reject"
in a Sieve script.
"reject" MUST be incompatible with the "vacation" [VACATION] action.
It is NOT RECOMMENDED that implementations permit the use of "reject"
with actions that cause mail delivery, such as "keep", "fileinto",
and "redirect".
Making "reject" compatible with actions that cause mail delivery
violates the RFC 5321 [SMTP] principle that a message is either
delivered or bounced back to the sender. So bouncing a message back
(rejecting) and delivering it will make the sender believe that the
message was not delivered.
However, there are existing laws requiring certain organizations to
archive all received messages, even the rejected ones. Also, it can
be quite useful to save copies of rejected messages for later
analysis.
Any action that would modify the message body will not have an effect
on the body of any message refused by "reject" using an SMTP response
code and MUST NOT have any effect on the content of generated DSN/
MDNs.
2.5. Details of Protocol-Level Refusal
If the "reason" string consists of multiple CRLF separated lines,
then the reason text MUST be returned as a multiline SMTP/LMTP
response, per Section 4.2.1 of [SMTP]. Any line MUST NOT exceed the
SMTP limit on the maximal line length. To make the "reason" string
conform to any such limits, the server MAY insert CRLFs and turn the
response into a multiline response.
In the following script (which assumes support for the "spamtest"
[SPAMTEST] and "fileinto" extensions), messages that test highly
positive for spam are refused.
Stone Standards Track [Page 9]
RFC 5429 Sieve Extension: Reject March 2009
Example:
require ["ereject", "spamtest", "fileinto",
"comparator-i;ascii-numeric"];
if spamtest :value "ge"
:comparator "i;ascii-numeric" "6" {
ereject text:
AntiSpam engine thinks your message is spam.
It is therefore being refused.
Please call 1-900-PAY-US if you want to reach us.
.
;
} elsif spamtest :value "ge"
:comparator "i;ascii-numeric" "4" {
fileinto "Suspect";
}
The following excerpt from an SMTP session shows it in action.
...
C: DATA
S: 354 Send message, ending in CRLF.CRLF.
...
C: .
S: 550-AntiSpam engine thinks your message is spam.
S: 550-It is therefore being refused.
S: 550 Please call 1-900-PAY-US if you want to reach us.
If the SMTP/LMTP server supports RFC 2034 [ENHANCED-CODES], it MUST
prepend an appropriate Enhanced Error Code to the "reason" text.
Enhanced Error code 5.7.1 or a more generic 5.7.0 are RECOMMENDED.
With an Enhanced Error Code, the response to a DATA command in the
SMTP example below will look like:
S: 550-5.7.1 AntiSpam engine thinks your message is spam.
S: 550-5.7.1 It is therefore being refused.
S: 550 5.7.1 Please call 1-900-PAY-US if you want to reach us.
if the server selected "5.7.1" as appropriate.
If a Sieve implementation that supports "ereject" does not wish to
immediately disclose the reason for rejection (for example, that it
detected spam), it may delay immediately sending of the 550 error
code by sending a 4XX error code on the first attempt to receive the
message.
Stone Standards Track [Page 10]
RFC 5429 Sieve Extension: Reject March 2009
3. Changes from RFC 3028
Clarified that the "reject" action cancels the implicit keep.
Extended the list of allowable actions on "reject" to include
protocol-level message rejection.
Added the "ereject" action that is similar to "reject", but will
always favor protocol-level message rejection.
4. Security Considerations
The introduction to this document discusses why rejecting messages
before delivery is better than accepting and bouncing them.
While the details of techniques that can be used to determine when to
silently drop a non-delivery report are outside the scope of this
document, the explicit permission this document gives to take such
action may enable denial-of-service situations. Techniques such as
spam-checking, return-path verification, and others, can and do have
false-positives. Care should be exercised to prevent the loss of
legitimate messages by failing to notify the sender of non-delivery.
Security issues associated with email auto-responders are fully
discussed in the Security Considerations section of [RFC3834]. This
document is not believed to introduce any additional security
considerations in this general area.
The "ereject" extension does not raise any other security
considerations that are not already present in the base [SIEVE]
specification, and these issues are discussed in [SIEVE].
5. IANA Considerations
The following section provides the IANA registrations for the Sieve
extensions specified in this document.
5.1. "reject" Extension Registration
IANA is requested to update the registration for the Sieve "reject"
extension as detailed below:
Capability name: reject
Description: adds the "reject" action for refusing delivery
of a message. The exact reason for refusal is
conveyed back to the client.
RFC number: RFC 5429
Contact address: the Sieve discussion list <ietf-mta-filters@imc.org>
Stone Standards Track [Page 11]
RFC 5429 Sieve Extension: Reject March 2009
5.2. "ereject" Extension Registration
IANA is requested to replace the preliminary registration of the
Sieve refuse extension with the following registration:
Capability name: ereject
Description: adds the "ereject" action for refusing delivery
of a message. The refusal should happen as early
as possible (e.g., at the protocol level) and might
not preserve the exact reason for refusal if it
contains non-US-ASCII text.
RFC number: RFC 5429
Contact address: the Sieve discussion list <ietf-mta-filters@imc.org>
6. References
6.1. Normative References
[DSN] Moore, K. and G. Vaudreuil, "An Extensible Message
Format for Delivery Status Notifications",
RFC 3464, January 2003.
[ENHANCED-CODES] Freed, N., "SMTP Service Extension for Returning
Enhanced Error Codes", RFC 2034, October 1996.
[KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[LMTP] Myers, J., "Local Mail Transfer Protocol",
RFC 2033, October 1996.
[MDN] Hansen, T. and G. Vaudreuil, "Message Disposition
Notification", RFC 3798, May 2004.
[REPORT] Vaudreuil, G., "The Multipart/Report Content Type
for the Reporting of Mail System Administrative
Messages", RFC 3462, January 2003.
[SIEVE] Guenther, P. and T. Showalter, "Sieve: An Email
Filtering Language", RFC 5228, January 2008.
[SMTP] Klensin, J., "Simple Mail Transfer Protocol",
RFC 5321, October 2008.
[UTF-8] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
Stone Standards Track [Page 12]
RFC 5429 Sieve Extension: Reject March 2009
[VACATION] Showalter, T. and N. Freed, "Sieve Email Filtering:
Vacation Extension", RFC 5230, January 2008.
6.2. Informative References
[EMAIL-ARCH] Crocker, D., "Internet Mail Architecture", Work
in Progress, October 2008.
[Joe-DoS] Frei, S., Silvestri, I., and G. Ollman, "Mail Non-
Delivery Notice Attacks", April 2004, <http://
www.techzoom.net/papers/
mail_non_delivery_notice_attacks_2004.pdf>.
[RFC3028] Showalter, T., "Sieve: A Mail Filtering Language",
RFC 3028, January 2001.
[RFC3834] Moore, K., "Recommendations for Automatic Responses
to Electronic Mail", RFC 3834, August 2004.
[SPAMTEST] Daboo, C., "Sieve Email Filtering: Spamtest and
Virustest Extensions", RFC 5235, January 2008.
[UTF8-RESP] Melnikov, A., "SMTP Language Extension", Work
in Progress, June 2007.
Stone Standards Track [Page 13]
RFC 5429 Sieve Extension: Reject March 2009
Appendix A. Acknowledgements
Thanks to Ned Freed, Cyrus Daboo, Arnt Gulbrandsen, Kristin Hubner,
Mark E. Mallett, Philip Guenther, Michael Haardt, and Randy Gellens
for comments and corrections.
The authors gratefully acknowledge the extensive work of Tim
Showalter as the author of the RFC 3028, which originally defined the
"reject" action.
Appendix B. Contributors
Matthew Elvey
The Elvey Partnership, LLC
1819 Polk Street, Suite 133
San Francisco, CA 94109
USA
EMail: matthew@elvey.com
Alexey Melnikov
Isode Limited
5 Castle Business Village
36 Station Road
Hampton, Middlesex TW12 2BX
UK
EMail: Alexey.Melnikov@isode.com
Author's Address
Aaron Stone (editor)
Serendipity
260 El Verano Ave
Palo Alto, CA 94306
USA
EMail: aaron@serendipity.palo-alto.ca.us
Stone Standards Track [Page 14]