💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc3072.txt captured on 2023-05-24 at 20:49:39.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group M. Wildgrube
Request for Comments: 3072 March 2001
Category: Informational
Structured Data Exchange Format (SDXF)
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved.
IESG Note
This document specifies a data exchange format and, partially, an API
that can be used for creating and parsing such a format. The IESG
notes that the same problem space can be addressed using formats that
the IETF normally uses including ASN.1 and XML. The document reader
is strongly encouraged to carefully read section 13 before choosing
SDXF over ASN.1 or XML. Further, when storing text in SDXF, the user
is encourage to use the datatype for UTF-8, specified in section 2.5.
Abstract
This specification describes an all-purpose interchange format for
use as a file format or for net-working. Data is organized in chunks
which can be ordered in hierarchical structures. This format is
self-describing and CPU-independent.
Table of Contents
1. Introduction ................................................. 2
2. Description of the SDXF data format .......................... 3
3. Introduction to the SDXF functions ........................... 5
3.1 General remarks .............................................. 5
3.2 Writing a SDXF buffer ........................................ 5
3.3 Reading a SDXF buffer ........................................ 6
3.4 Example ...................................................... 6
4. Platform independence ........................................ 8
5. Compression .................................................. 9
6. Encryption ...................................................11
7. Arrays........................................................11
8. Description of the SDXF functions ............................12
Wildgrube Informational [Page 1]
RFC 3072 Structured Data Exchange Format March 2001
8.1 Introduction .................................................12
8.2 Basic definitions ............................................13
8.3 Definitions for C++ ..........................................15
8.4 Common Definitions ...........................................16
8.5 Special functions ............................................17
9. 'Support' of UTF-8 ...........................................19
10. Security Considerations .....................................19
11. Some general hints ..........................................20
12. IANA Considerations .........................................20
13. Discussion ..................................................21
13.1 SDXF vs. ASN.1 ..............................................21
13.2 SDXF vs. XML ................................................22
14. Author's Address ............................................24
15. Acknowledgements ............................................24
16. References ..................................................24
17. Full Copyright Statement ....................................26
1. Introduction
The purpose of the Structured Data eXchange Format (SDXF) is to
permit the interchange of an arbitrary structured data block with
different kinds of data (numerical, text, bitstrings). Because data
is normalized to an abstract computer architecture independent
"network format", SDXF is usable as a network interchange data
format.
This data format is not limited to any application, the demand for
this format is that it is usable as a text format for word-
processing, as a picture format, a sound format, for remote procedure
calls with complex parameters, suitable for document formats, for
interchanging business data, etc.
SDXF is self-describing, every program can unpack every SDXF-data
without knowing the meaning of the individual data elements.
Together with the description of the data format a set of functions
will be introduced. With the help of these functions one can create
and access the data elements of SDXF. The idea is that a programmer
should only use these functions instead of maintaining the structure
by himself on the level of bits and bytes. (In the speech of
object-oriented programming these functions are methods of an object
which works as a handle for a given SDXF data block.)
SDXF is not limited to a specific platform, along with a correct
preparation of the SDXF functions the SDXF data can be interchanged
(via network or data carrier) across the boundaries of different
architectures (specified by the character code like ASCII, ANSI or
EBCDIC and the byte order for binary data).
Wildgrube Informational [Page 2]
RFC 3072 Structured Data Exchange Format March 2001
SDXF is also prepared to compress and encrypt parts or the whole
block of SDXF data.
2. Description of SDXF data format.
2.1 First we introduce the term "chunk". A chunk is a data structure
with a fixed set of components. A chunk may be "elementary" or
"structured". The latter one contains itself one or more other
chunks.
A chunk consists of a header and the data body (content):
+----------+-----+-------+-----------------------------------+
| Name | Pos.| Length| Description |
+----------+-----+-------+-----------------------------------+
| chunk-ID | 1 | 2 | ID of the chunk (unsigned short) |
| flags | 3 | 1 | type and properties of this chunk |
| length | 4 | 3 | length of the following data |
| content | 7 | *) | net data or a list of of chunks |
+----------+-----+-------+-----------------------------------+
(* as stated in "length". total length of chunk is length+6. The
chunk ID is a non-zero positive number.
or more visually:
+----+----+----+----+----+----+----+----+----+-...
| chunkID | fl | length | content
+----+----+----+----+----+----+----+----+----+-...
or in ASN.1 syntax:
chunk ::= SEQUENCE
{
chunkID INTEGER (1..65535),
flags BIT STRING,
length OCTET STRING SIZE 3, -- or: INTEGER (0..16777215)
content OCTET STRING
}
2.2 Structured chunk.
A structured chunk is marked as such by the flag byte (see 2.5).
Opposed to an elementary chunk its content consists of a list of
chunks (elementary or structured):
Wildgrube Informational [Page 3]
RFC 3072 Structured Data Exchange Format March 2001
+----+-+---+-------+-------+-------+-----+-------+
| id |f|len| chunk | chunk | chunk | ... | chunk |
+----+-+---+-------+-------+-------+-----+-------+
With the help of this concept you can reproduce every hierarchically
structured data into a SDXF chunk.
2.3 Some Remarks about the internal representation of the chunk's
elements:
Binary values are always in high-order-first (big endian) format,
like the binary values in the IP header (network format). A length
of 300 (=256 + 32 + 12) is stored as
+----+----+----+----+----+----+----+----+----+--
| | | 00 01 2C | content
+----+----+----+----+----+----+----+----+----+--
in hexadecimal notation.
This is also valid for the chunk-ID.
2.4 Character values in the content portion are also an object of
adaptation: see chapter 4.
2.5 Meaning of the flag-bits: Let us represent the flag byte in this
manner:
+-+-+-+-+-+-+-+-+
|0|1|2|3|4|5|6|7|
+-+-+-+-+-+-+-+-+
| | | | | | | |
| | | | | | | +-- reserved
| | | | | | +---- array
| | | | | +------ short chunk
| | | | +-------- encrypted chunk
| | | +---------- compressed chunk
| | |
+-+-+------------ data type (0..7)
data types are:
0 -- pending structure (chunk is inconsistent, see also 11.1)
1 -- structure
2 -- bit string
3 -- numeric
4 -- character
5 -- float (ANSI/IEEE 754-1985)
Wildgrube Informational [Page 4]
RFC 3072 Structured Data Exchange Format March 2001
6 -- UTF-8
7 -- reserved
2.6 A short chunk has no data body. The 3 byte Length field is used as
data bytes instead. This is used in order to save space when there
are many small chunks.
2.7 Compressed and encrypted chunks are explained in chapter 5 and 6.
2.8 Arrays are explained in chapter 7.
2.9 Handling of UTF-8 is explained in chapter 9.
2.10 Not all combinations of bits are allowed or reasonable:
- the flags 'array' and 'short' are mutually exclusive.
- 'short' is not applicable for data type 'structure' and 'float'.
- 'array' is not applicable for data type 'structure'.
3. Introduction to the SDXF functions
3.1 General remarks
The functionality of the SDXF concept is not bounded to any
programming language, but of course the functions themselves must be
coded in a particular language. I discuss these functions in C and
C++, because in the meanwhile these languages are available on almost
all platforms.
All these functions for reading and writing SDXF chunks uses only one
parameter, a parameter structure. In C++ this parameter structure is
part of the "SDXF class" and the SDXF functions are methods of this
class.
An exact description of the interface is given in chapter 8.
3.2 Writing a SDXF buffer
For to write SDXF chunks, there are following functions:
init -- initialize the parameter structure
create -- create a new chunk
leave -- "close" a structured chunk
Wildgrube Informational [Page 5]
RFC 3072 Structured Data Exchange Format March 2001
3.3 Reading a SDXF buffer
For to read SDXF chunks, there are following functions:
init -- initialize the parameter structure
enter -- "go into" a structured chunk
next -- "go to" the next chunk inside a structured chunk
extract -- extract the content of an elementary chunk into
user's data area
leave -- "go out" off a structured chunk
3.4 Example:
3.4.1 Writing:
For demonstration we use a reduced (outlined) C++ Form of these
functions with polymorph definitions:
void create (short chunkID); // opens a new structure,
void create (short chunkID, char *string);
// creates a new chunk with dataType character, etc.)
The sequence:
SDXF x(new); // create the SDXF object "x" for a new chunk
// includes the "init"
x.create (3301); // opens a new structure
x.create (3302, "first chunk");
x.create (3303, "second chunk");
x.create (3304); // opens a new structure
x.create (3305, "chunk in a structure");
x.create (3306, "next chunk in a structure");
x.leave (); // closes the inner structure
x.create (3307, "third chunk");
x.leave (); // closes the outer structure
Wildgrube Informational [Page 6]
RFC 3072 Structured Data Exchange Format March 2001
creates a chunk which we can show graphically like:
3301
|
+--- 3302 = "first chunk"
|
+--- 3303 = "second chunk"
|
+--- 3304
| |
| +--- 3305 = "chunk in a structure"
| |
| +--- 3306 = "next chunk in a structure"
|
+--- 3307 = "last chunk"
3.4.2 Reading
A typically access to a structured SDXF chunk is a selection inside
a loop:
SDXF x(old); // defines a SDXF object "x" for an old chunk
x.enter (); // enters the structure
while (x.rc == 0) // 0 == ok, rc will set by the SDXF functions
{
switch (x.chunkID)
{
case 3302:
x.extract (data1, maxLength1);
// extr. 1st chunk into data1
break;
case 3303:
x.extract (data2, maxLength2);
// extr. 2nd chunk into data2
break;
case 3304: // we know this is a structure
x.enter (); // enters the inner structure
while (x.rc == 0) // inner loop
{
switch (x.chunkID)
{
case 3305:
x.extract (data3, maxLength3);
// extr. the chunk inside struct.
Wildgrube Informational [Page 7]
RFC 3072 Structured Data Exchange Format March 2001
break;
case 3306:
x.extract (data4, maxLength4);
// extr. 2nd chunk inside struct.
break;
}
x.next (); // returns x.rc == 1 at end of structure
} // end-while
break;
case 3307:
x.extract (data5, maxLength5);
// extract last chunk into data
break;
// default: none - ignore unknown chunks !!!
} // end-switch
x.next (); // returns x.rc = 1 at end of structure
} // end-while
4. Platform independence
The very most of the computer platforms today have a 8-Bits-in-a-Byte
architecture, which enables data exchange between these platforms.
But there are two significant points in which platforms may be
different:
a) The representation of binary numerical (the short and long int and
floats).
b) The representation of characters (ASCII/ANSI vs. EBCDIC)
Point (a) is the phenomenon of "byte swapping": How is a short int
value 259 = 0x0103 = X'0103' be stored at address 4402?
The two flavours are:
4402 4403
01 03 the big-endian, and
03 01 the little-endian.
Point (b) is represented by a table of the assignment of the 256
possible values of a Byte to printable or control characters. (In
ASCII the letter "A" is assigned to value (or position) 0x41 = 65, in
EBCDIC it is 0xC1 = 193.)
Wildgrube Informational [Page 8]
RFC 3072 Structured Data Exchange Format March 2001
The solution of these problems is to normalize the data:
We fix:
(a) The internal representation of binary numerals are 2-complements
in big-endian order.
(b) The internal representation of characters is ISO 8859-1 (also
known as Latin 1).
The fixing of point (b) should be regarded as a first strike. In
some environment 8859-1 seems not to be the best choice, in a greek
or russian environment 8859-5 or 8859-7 are appropriate.
Nevertheless, in a specific group (or world) of applications, that is
to say all the applications which wants to interchange data with a
defined protocol (via networking or diskette or something else), this
internal character table must be unique.
So a possibility to define a translation table (and his inversion)
should be given.
Important: You construct a SDXF chunk not for a specific addressee,
but you adapt your data into a normalized format (or network format).
This adaption is not done by the programmer, it will be done by the
create and extract function. An administrator has take care of
defining the correct translation tables.
5. Compression
As stated in 2.5 there is a flag bit which declares that the
following data (elementary or structured) are compressed. This data
is not further interpretable until it is decompressed. Compression
is transparently done by the SDXF functions: "create" does the
compression for elementary chunks, "leave" for structured chunks,
"extract" does the decompression for elementary chunks, "enter" for
structured chunks.
Transparently means that the programmer has only to tell the SDXF
functions that he want compress the following chunk(s).
For choosing between different compression methods and for
controlling the decompressed (original) length, there is an
additional definition:
Wildgrube Informational [Page 9]
RFC 3072 Structured Data Exchange Format March 2001
After the chunk header for a compressed chunk, a compression header
is following:
+-----------------------+---------------+---------------->
| chunk header | compr. header | compressed data
+---+---+---+---+---+---+---+---+---+---+---------------->
|chunkID|flg| length |md | orglength |
+---+---+---+---+---+---+---+---+---+---+---------------->
- 'orglength' is the original (decompressed) length of the data.
- 'md' is the "compression method": Two methods are described here:
# method 01 for a simple (fast but not very effective)
"Run Length 1" or "Byte Run 1" algorithm. (More then two
consecutive identical characters are replaced by the number of
these characters and the character itself.)
more precisely:
The compressed data consists of several sections of various
length. Every section starts with a "counter" byte, a signed
"tiny" (8 bit) integer, which contains a length information.
If this byte contains the value "n",
with n >= 0 (and n <128), the next n+1 bytes will be taken
unchanged;
with n < 0 (and n > -128), the next byte will be replicated
-n+1 times;
n = -128 will be ignored.
Appending blanks will be cutted in general. If these are
necessary, they can be reconstructed while "extract"ing with
the parameter field "filler" (see 8.2.1) set to space
character.
# method 02 for the wonderful "deflate" algorithm which comes
from the "zip"-people.
The authors are:
Jean-loup Gailly (deflate routine),
Mark Adler (inflate routine), and others.
The deflate format is described in [DEFLATE].
The values for the compression method number are maintained by
IANA, see chap. 12.1.
Wildgrube Informational [Page 10]
RFC 3072 Structured Data Exchange Format March 2001
6. Encryption
As stated in 2.5 there is a flag bit which declares that the
following data (elementary or structured) is encrypted. This data is
not interpretable until it is decrypted. En/Decryption is
transparently done by the SDXF functions, "create" does the
encryption for elementary chunks, "leave" for structured chunks,
"extract" does the decryption for elementary chunks, "enter" for
structured chunks. (Yes it sounds very similar to chapter 5.) More
then one encryption method for a given range of applications is not
very reasonable. Some encryption algorithms work with block ciphering
algorithms. That means that the length of the data to encrypt must be
rounded up to the next multiple of this block length. This blocksize
(zero means non-blocking) is reported by the encryption interface
routine (addressed by the option field *encryptProc, see chapter 8.5)
with mode=3. If blocking is used, at least one byte is added, the
last byte of the lengthening data contains the number of added bytes
minus one. With this the decryption interface routine can calculate
the real data length.
If an application (or network connect handshaking protocol) needs to
negotiate an encryption method it should be used a method number
maintained by IANA, see chap. 12.2.
Even the en/decryption is done transparently, an encryption key
(password) must be given to the SDXF functions. Encryption is done
after translating character data into, decryption is done before
translation from the internal ("network-") format.
If both, encryption and compression are applied on the same chunk,
compression is done first - compression on good encrypted data (same
strings appears as different after encryption) tends to zero
compression rates.
7. Arrays
An array is a sequence of chunks with identical chunk-ID, length and
data type.
At first a hint: in principle a special definition in SDXF for such
an array is not really necessary:
It is not forbidden that there are more than one chunk with equal
chunk-ID within the same structured chunk.
Therefore with a sequence of SDX_next / SDX_extract calls one can
fill the destination array step by step.
Wildgrube Informational [Page 11]
RFC 3072 Structured Data Exchange Format March 2001
If there are many occurrences of chunks with the same chunk-ID (and a
comparative small length), the overhead of the chunk-packages may be
significant.
Therefore the array flag is introduced. An array chunk has only one
chunk header for the complete sequence of elementary chunks. After
the chunk header for an array chunk, an array header is following:
This is a short integer (big endian!) which contains the number of
the array elements (CT). Every element has a fixed length (EL), so
the chunklength (CL) is CL = EL * CT + 2.
The data elements follows immediately after the array header.
The complete array will be constructed by SDX_create, the complete
array will be read by SDX_extract.
The parameter fields (see 8.2.1) 'dataLength' and 'count' are used
for the SDXF functions 'extract' and 'create':
Field 'dataLength' is the common length of the array elements,
'count' is the actual dimension of the array for 'create' (input).
For the 'extract' function 'count' acts both as an input and output
parameter:
Input : the maximum dimension
output: the actual array dimension.
(If output count is greater than input count, the 'data cutted'
warning will be responded and the destination array is filled up to
the maximum dimension.)
8. Description of the SDXF functions
8.1 Introduction
Following the principles of Object Oriented Programming, not only the
description of the data is necessary, but also the functions which
manipulate data - the "methods".
For the programmer knowing the methods is more important than knowing
the data structure, the methods has to know the exact specifications
of the data and guarantees the consistence of the data while creating
them.
Wildgrube Informational [Page 12]
RFC 3072 Structured Data Exchange Format March 2001
A SDXF object is an instance of a parameter structure which acts as a
programming interface. Especially it points to an actual SDXF data
chunk, and, while processing on this data, there is a pointer to the
actual inner chunk which will be the focus for the next operation.
The benefit of an exact interface description is the same as using
for example the standard C library functions: By using standard
interfaces your code remains platform independent.
8.2 Basic definitions
8.2.1 The SDXF Parameter structure
All SDXF access functions need only one parameter, a pointer to the
SDXF parameter structure:
First 3 prerequisite definitions:
typedef short int ChunkID;
typedef unsigned char Byte;
typedef struct Chunk
{
ChunkID chunkID;
Byte flags;
char length [3];
Byte data;
} Chunk;
And now the parameter structure:
typedef struct
{
ChunkID chunkID; // name (ID) of Chunk
Byte *container; // pointer to the whole Chunk
long bufferSize; // size of container
Chunk *currChunk; // pointer to actual Chunk
long dataLength; // length of data in Chunk
long maxLength; // max. length of Chunk for SDX_extract
long remainingSize; // rem. size in cont. after SDX_create
long value; // for data type numeric
double fvalue; // for data type float
char *function; // name of the executed SDXF function
Byte *data; // pointer to Data
Byte *cryptkey; // pointer to Crypt Key
short count; // (max.) number of elements in an array
short dataType; // Chunk data type / init open type
short ec; // extended return-code
Wildgrube Informational [Page 13]
RFC 3072 Structured Data Exchange Format March 2001
short rc; // return-code
short level; // level of hierarchy
char filler; // filler char for SDX_extract
Byte encrypt; // Indication if data to encrypt (0 / 1)
Byte compression; // compression method
// (00=none, 01=RL1, 02=zip/deflate)
} SDX_obj, *SDX_handle;
Only the "public" fields of the parameter structure which acts as
input and output for the SDXF functions is described here. A given
implementation may add some "private" fields to this structure.
8.2.2 Basic Functions
All these functions works with a SDX_handle as the only formal
parameter. Every function returns as output ec and rc as a report of
success. For the values for ec, rc and dataType see chap. 8.4.
1. SDX_init : Initialize the parameter structure.
input : container, dataType, bufferSize (for dataType =
SDX_NEW only)
output: currChunk, dataLength (for dataType = SDX_OLD only),
ec, rc,
the other fields of the parameter structure will be
initialized.
2. SDX_enter : Enter a structured chunk.
You can access the first chunk inside this structured chunk.
input : none
output: currChunk, chunkID, dataLength, level, dataType,
ec, rc
3. SDX_leave : Leave the actual entered structured chunk.
input : none
output: currChunk, chunkID, dataLength, level, dataType,
ec, rc
4. SDX_next : Go to the next chunk inside a structured chunk.
input : none
output: currChunk, chunkID, dataLength, dataType, count, ec, rc
At the end of a structured chunk SDX_next returns rc =
SDX_RC_failed and ec = SDX_EC_eoc (end of chunk)
The actual structured chunk is SDX_leave'd automatically.
Wildgrube Informational [Page 14]
RFC 3072 Structured Data Exchange Format March 2001
5. SDX_extract : Extract data of the actual chunk.
(If actual chunk is structured, only a copy is done, elsewhere
the data is converted to host format.)
input / output depends on the dataType:
if dataType is structured, binary or char:
input : data, maxLength, count, filler
output: dataLength, count, ec, rc
if dataType is numeric (float resp.):
input : none
output: value (fvalue resp.), ec, rc
6. SDX_select : Go to the (next) chunk with a given chunkID.
input : chunkID
output: currChunk, dataLength, dataType, ec, rc
7. SDX_create : Creating a new chunk (at the end of the actual
structured chunk).
input : chunkID, dataLength, data, (f)value, dataType,
compression, encrypt, count
update: remainingSize, level
output: currChunk, dataLength, ec, rc
8. SDX_append : Append a complete chunk at the end of the actual
structured chunk).
input : data, maxLength, currChunk
update: remainingSize, level
output: chunkID, chunkLength, maxLength, dataType, ec, rc
8.3 Definitions for C++
This is the specification of the SDXF class in C++: (The type 'Byte'
is defined as "unsigned char" for bitstrings, opposed to "signed
char" for character strings)
class C_SDXF
{
public:
// constructors and destructor:
C_SDXF (); // dummy
C_SDXF (Byte *cont); // old container
C_SDXF (Byte *cont, long size); // new container
C_SDXF (long size); // new container
~C_SDXF ();
// methods:
Wildgrube Informational [Page 15]
RFC 3072 Structured Data Exchange Format March 2001
void init (void); // old container
void init (Byte *cont); // old container
void init (Byte *cont, long size); // new container
void init (long size); // new container
void enter (void);
void leave (void);
void next (void);
long extract (Byte *data, long length); // chars, bits
long extract (void); // numeric data
void create (ChunkID); // structured
void create (ChunkID, long value); // numeric
void create (ChunkID, double fvalue); // float
void create (ChunkID, Byte *data, long length);// binary
void create (ChunkID, char *data); // chars
void set_compression (Byte compression_method);
void set_encryption (Byte *encryption_key);
// interface:
ChunkID id; // see 8.4.1
short dataType; // see 8.4.2
long length; // length of data or chunk
long value;
double fvalue;
short rc; // the raw return code see 8.4.3
short ec; // the extended return code see 8.4.4
protected:
// implementation dependent ...
};
8.4 Common Definitions:
8.4.1 Definition of ChunkID:
typedef short ChunkID;
8.4.2 Values for dataType:
SDX_DT_inconsistent = 0
SDX_DT_structured = 1
SDX_DT_binary = 2
SDX_DT_numeric = 3
SDX_DT_char = 4
SDX_DT_float = 5
Wildgrube Informational [Page 16]
RFC 3072 Structured Data Exchange Format March 2001
SDX_DT_UTF8 = 6
data types for SDX_init:
SDX_OLD = 1
SDX_NEW = 2
8.4.3 Values for rc:
SDX_RC_ok = 0
SDX_RC_failed = 1
SDX_RC_warning = 1
SDX_RC_illegalOperation = 2
SDX_RC_dataError = 3
SDX_RC_parameterError = 4
SDX_RC_programError = 5
SDX_RC_noMemory = 6
8.4.4 Values for ec:
SDX_EC_ok = 0
SDX_EC_eoc = 1 // end of chunk
SDX_EC_notFound = 2
SDX_EC_dataCutted = 3
SDX_EC_overflow = 4
SDX_EC_wrongInitType = 5
SDX_EC_comprerr = 6 // compression error
SDX_EC_forbidden = 7
SDX_EC_unknown = 8
SDX_EC_levelOvflw = 9
SDX_EC_paramMissing = 10
SDX_EC_magicError = 11
SDX_EC_not_consistent = 12
SDX_EC_wrongDataType = 13
SDX_EC_noMemory = 14
SDX_EC_error = 99 // rc is sufficiently
8.5 Special functions
Besides the basic definitions there is a global function
(SDX_getOptions) which returns a pointer to a global table of
options.
With the help of these options you can adapt the behaviour of SDXF.
Especially you can define an alternative pair of translation tables
or an alternative function which reads these tables from an external
resource (p.e. from disk).
Wildgrube Informational [Page 17]
RFC 3072 Structured Data Exchange Format March 2001
Within this table of options there is also a pointer to the function
which is used for encryption / decryption: You can install your own
encryption algorithm by setting this pointer.
The options pointer is received by:
SDX_TOptions *opt = SDX_getOptions ();
With:
typedef struct
{
Byte *toHost; // Trans tab net -> host
Byte *toNet; // Trans tab host -> net
int maxlevel; // highest possible level
int translation; // translation net <-> host
// is in effect=1 or not=0
TEncryptProc *encryptProc; // alternate encryption routine
TGetTablesProc *getTablesProc; // alternate routine defining
// translation Tables
TcvtUTF8Proc *convertUTF8; // routine to convert to/from UTF-8
} SDX_TOptions;
typedef long TencryptProc (
int mode, // 1= to encrypt, 2= to decrypt, 3= encrypted length
Byte *buffer, // data to en/decrypt
long len, // len: length of buffer
char *passw); // Password
// returns length of en/de-crypted data
// (parameter buffer and passw are ignored for mode=3)
// returns blocksize for mode=3 and len=0.
// blocksize is zero for non-blocking algorithms
typedef int TGetTablesProc (Byte **toNet, Byte **toHost);
// toNet, toHost: pointer to output params. Both params
// points to translation tables of 256 Bytes.
// returns success: 1 = ok, 0 = error.
typedef int TcvtUTF8Proc
( int mode, // 1 = to UTF-8, 2 = from UTF-8
Byte *target, int *targetlength, // output
Byte *source, int sourcelength); // input
// targetlength contains maximal size as input param.
// returns success: 1 = ok, 0 = no conversion
Wildgrube Informational [Page 18]
RFC 3072 Structured Data Exchange Format March 2001
9. 'Support' of UTF-8.
Many systems supports [UTF-8] as a character format for transferred
data. The benefit is that no fixing of a specific character set for
an application is needed because the set of 'all' characters is used,
represented by the 'Universal Character Set' UCS-2 [UCS], a double
byte coding for characters.
SDXF does not really deal with UTF-8 by itself, there are many
possibilities to interprete an UTF-8 sequence: The application may:
- reconstruct the UCS-2 sequence,
- accepts only the pure ASCII character and maps non-ASCII to a
special 'non-printable' character.
- target is pure ASCII, non-ASCII is replaced in a senseful manner
(French accented vowels replaced by vowels without accents, etc.).
- target is a specific ANSI character set, the non-ASCII chars are
mapped as possible, other replaced to a 'non-printable'.
- etc.
But SDXF offers an interface for the 'extract' and 'create'
functions:
A function pointer may be specified in the options table to maintain
this possibility (see 8.5). Default for this pointer is NULL: No
further conversions are done by SDXF, the data are copied 'as is', it
is treated as a bit string as for data type 'binary'.
If this function is specified, it is used by the 'create' function
with the 'toUTF8' mode, and by the 'extract' function with the '
fromUTF8' mode. The invoking of these functions is done by SDXF
transparently.
If the function returns zero (no conversion) SDXF copies the data
without conversion.
10. Security Considerations
Any corruption of data in the chunk headers denounce the complete
SDXF structure.
Any corruption of data in a encrypted or compressed SDXF structure
makes this chunk unusable. An integrity check after decryption or
decompression should be done by the "enter" function.
While using TCP/IP (more precisely: IP) as a transmission medium we
can trust on his CRC check on the transport layer.
Wildgrube Informational [Page 19]
RFC 3072 Structured Data Exchange Format March 2001
11. Some general hints
1. A consistent construction of a SDXF structure is done if every
"create" to a structured chunk is closed by a paired "leave".
While a structured chunk is under construction, his data type is
set to zero - that means: this chunk is inconsistent. The
SDX_leave function sets the datatype to "structured".
2. While creating an elementary chunk a platform dependent
transformation to a platform independent format of the data is
performed - at the end of construction the content of the buffer
is ready to transport to another site, without any further
translation.
3. As you see no data definition in your programming language is
needed for to construct a specific SDXF structure. The data is
created dynamically by function calls.
4. With SDXF as a base you can define protocols for client / server
applications. These protocols may be extended in downward
compatibility manner by following two rules:
Rule 1: Ignore unknown chunkIDs.
Rule 2: The sequence of chunks should not be significant.
12. IANA Considerations
The compression and encryption algorithms for SDXF is not fixed, SDXF
is open for various algorithms. Therefore an agreement is necessary
to interprete the compression and encryption algorithm method
numbers. (Encryption methods are not a semantic part of SDXF, but
may be used for a connection protocol to negotiate the encryption
method to use.)
Following two items are registered by IANA:
12.1 COMPRESSION METHODS FOR SDXF
The compressed SDXF chunk starts with a "compression header". This
header contains the compression method as an unsigned 1-Byte integer
(1-255). These numbers are assigned by IANA and listed here:
Wildgrube Informational [Page 20]
RFC 3072 Structured Data Exchange Format March 2001
compression
method Description Hints
--------- ------------------------------- -------------
01 RUN-LENGTH algorithm see chap. 5
02 DEFLATE (ZIP) see [DEFLATE]
03-239 IANA to assign
240-255 private or application specific
12.2 ENCRYPTION METHODS FOR SDXF
An unique encryption method is fixed or negotiated by handshaking.
For the latter one a number for each encryption method is necessary.
These numbers are unsigned 1-Byte integers (1-255). These numbers
are assigned by IANA and listed here:
encryption
method Description
--------- ------------------------------
01-239 IANA to assign
240-255 private or application specific
12.3 Hints for assigning a number:
Developers which want to register a compression or encrypt method for
SDXF should contact IANA for a method number. The ASSIGNED NUMBERS
document should be referred to for a current list of METHOD numbers
and their corresponding protocols, see [IANA]. The new method SHOULD
be a standard published as a RFC or by a established standardization
organization (as OSI).
13. Discussion
There are already some standards for Internet data exchanging, IETF
prefers ASN.1 and XML therefore. So the reasons for establish a new
data format should be discussed.
13.1 SDXF vs. ASN.1
The demand of ASN.1 (see [ASN.1]) is to serve program language
independent means to define data structures. The real data format
which is used to send the data is not defined by ASN.1 but usually
BER or PER (or some derivates of them like CER and DER) are used in
this context, see [BER] and [PER].
Wildgrube Informational [Page 21]
RFC 3072 Structured Data Exchange Format March 2001
The idea behind ASN.1 is: On every platform on which a given
application is to develop descriptions of the used data structures
are available in ASN.1 notation. Out off these notations the real
language dependent definitions are generated with the help of an
ASN.1-compiler.
This compiler generates also transform functions for these data
structures for to pack and unpack to and from the BER (or other)
format.
A direct comparison between ASN.1 and SDXF is somehow inappropriate:
The data format of SDXF is related rather to BER (and relatives).
The use of ASN.1 to define data structures is no contradiction to
SDXF, but: SDXF does not require a complete data structure to build
the message to send, nor a complete data structure will be generated
out off the received message.
The main difference lies in the concept of building and
interpretation of the message, I want to name it the "static" and
"dynamic" concept:
o ASN.1 uses a "static" approach: The whole data structure must
exists before the message can be created.
o SDXF constructs and interpretes the message in a "dynamic" way,
the message will be packed and unpacked step by step by SDXF
functions.
The use of static structures may be appropriate for a series of
applications, but for complex tasks it is often impossible to define
the message as a whole. As an example try to define an ASN.1
description for a complex structured text document which is presented
in XML: There are sections and paragraphs and text elements which
may recursively consist of sections with specific text attributes.
13.2 SDXF vs. XML
On the one hand SDXF and XML are similar as they can handle any
recursive complex data stream. The main difference is the kind of
data which are to be maintained:
o XML works with pure text data (though it should be noted that the
character representation is not standardized by XML). And: a XML
document with all his tags is readable by human. Binary data as
graphic is not included directly but may be referenced by an
external link as in HTML.
Wildgrube Informational [Page 22]
RFC 3072 Structured Data Exchange Format March 2001
In XML there is no strong separation between informational and
control data, escape characters (like "<" and "&") and the
<![CDATA[...]]> construction are used to distinguish between these
two types of data.
o SDXF maintains machine-readable data, it is not designed to be
readable by human nor to edit SDXF data with a text editor (even
more if compression and encryption is used). With the help of the
SDXF functions you have a quick and easy access to every data
element. The standard parser for a SDXF data structure follows
always a simple template, the "while - switch -case ID -
enter/extract" pattern as outlined in chap. 3.4.2.
Because of the complete different philosophy behind XML and SDXF (and
even ASN.1) a direct comparison may not be very senseful, as XML has
its own right to exist next to ASN.1 (and even SDXF).
Nevertheless there is a chance to convert a XML data stream into a
SDXF structure: As a first strike, every XML tag becomes a SDXF
chunk ID. An elementary sequence <tag>pure text</tag> can be
transformed into an elementary (non-structured) chunk with data type
"character". Tags with attributes and sequences with nested tags are
transformed into structured chunks. Because XML allows a tag
sequence everywhere in a text stream, an artificially "elementary
text" tag must be introduced:
If <t> is the tag for text elements, the sequence:
<t>this is a text <attr value='bold'>with</attr> attributes</t>
is to be "in thought" replaced by:
<t><et>this is a text </et><attr value='bold'><et>with</et></attr>
<et> attributes</et></t>
(With "et" as the "elementary text" tag)
Wildgrube Informational [Page 23]
RFC 3072 Structured Data Exchange Format March 2001
This results in following SDXF structure:
ID_t
|
+-- ID_et = " this is a text "
|
+-- ID_attr
| |
| +-- ID_value = "bold"
| |
| +-- ID_et = "with"
|
+-- ID_et = " attributes"
ID_t and ID_et may be represented by the same chunk ID, only
distinguished by the data type ("structured" for <t> and "character"
for <et>)
Binary data as pictures can be directly imbedded into a SDXF
structure instead referencing them as an external link like in HTML.
14. Author's Address
Max Wildgrube
Schlossstrasse 120
60486 Frankfurt
Germany
EMail: max@wildgrube.com
15. Acknowledgements
I would like to thank Michael J. Slifcak (mslifcak@iss.net) for the
supporting discussions.
16. References
[ASN.1] Information processing systems - Open Systems
Interconnection, "Specification of Abstract Syntax Notation
One (ASN.1)", International Organization for
Standardization, International Standard 8824, December
1987.
[BER] Information Processing Systems - Open Systems
Interconnection - "Specification of Basic Encoding Rules
for Abstract Notation One (ASN.1)", International
Organization for Standardization, International Standard
8825-1, December 1987.
Wildgrube Informational [Page 24]
RFC 3072 Structured Data Exchange Format March 2001
[DEFLATE] Deutsch, P., "DEFLATE Compressed Data Format Specification
version 1.3", RFC 1951, May 1996.
[IANA] Internet Assigned Numbers Authority,
http://www.iana.org/numbers.htm
[PER] Information Processing Systems - Open Systems
Interconnection -"Specification of Packed Encoding Rules
for Abstract Syntax Notation One (ASN.1)", International
Organization for Standardization, International Standard
8825-2.
[UCS] ISO/IEC 10646-1:1993. International Standard -- Information
technology -- Universal Multiple-Octet Coded Character Set
(UCS)
[UTF8] Yergeau, F., "UTF-8, a transformation format of ISO 10646",
RFC 2279, January 1998.
Wildgrube Informational [Page 25]
RFC 3072 Structured Data Exchange Format March 2001
17. Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Wildgrube Informational [Page 26]