💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc3049.txt captured on 2023-05-24 at 20:50:04.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group J. Naugle
Request for Comments: 3049 K. Kasthurirangan
Category: Standards Track IBM
G. Ledford
Zephyr Development
January 2001
TN3270E Service Location and Session Balancing
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved.
Abstract
This document discusses the implementation of Service Location
Protocol (SLP) and session balancing with a TN3270E emulator in a
client server implementation with a TN3270E server.
Application program developer's can locate TN3270E services and load
balance among those services (3270 host sessions), by using this SLP
support.
Table of Contents
1. Introduction and Terminology ................................. 2
1.1 Terminology .............................................. 2
2. An Overview of RFC 2165 ...................................... 3
2.1 SLP Agents ............................................... 3
2.2 Service Agents ........................................... 3
2.3 User Agents .............................................. 4
3. TN3270E Server Environment and Load .......................... 4
3.1 TnN3270E Server Load ..................................... 4
4. TN3270E Client Configuration ................................. 6
4.1 SLP Scope ................................................ 6
4.2 DA-Discovery Time-Out .................................... 6
4.3 SA-Discovery Time-Out .................................... 7
5. TN3270E Client Implementation Information .................... 7
5.1 Overview ................................................. 7
Naugle, et al. Standards Track [Page 1]
RFC 3049 TN3270E Location & Balancing January 2001
5.2 How to Obtain List of TN3270E Servers Supporting SLP ..... 8
5.3 TN3270E Sample Client Flow ............................... 9
5.3.1 Open the SLP connection ............................. 9
5.3.2 Query the list of TN3270E servers ................... 9
5.3.3 Forward Looking Example using SLPv2 ................. 10
5.3.4 Determine loading of each TN3270E server ............ 10
5.4 Recommendations .......................................... 11
6. Sample Trace Flow of SLP and Session Balancing ............... 11
7. Service Templates and Service Registration ................... 12
7.1 The TN3270E Service Type Template ........................ 12
7.2 The Server Service Template .............................. 16
7.3 Template Contact Information ............................. 17
7.4 Security Considerations .................................. 17
7.5 Sample TN3270 Service Registration Message ............... 18
7.6 Sample Server Service Registration Message ............... 19
8. References ................................................... 19
9. Authors' Addresses ........................................... 20
10. Full Copyright Statement .................................... 21
1. Introduction and Terminology
This document will provide information on Service Location Protocol
implementation to discover TN3270E servers in a network and session
balance among those servers. This implementation follows the
standards track RFC 2165, Service Location Protocol [1] but also
provides some examples when using Service Location Protocol version 2
to be forward looking. Service Location Protocol version 2 is
documented in RFC 2608 [4] and RFC 2609 [2].
1.1 Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [1].
Session Balance - This refers to the ability of TN3270E client to use
server load information to establish a TN3270E connection to the
TN3270E server with the least load at that time. The purpose is to
distribute the connection of TN3270E sessions among more than one
TN3270E server, and one server will not be excessively loaded. The
term "load balance" is a more general term, with respect to server
load, and in this document we are focusing on the TN3270E session
connections to least loaded servers.
SNA Gateway - A Systems Network Architecture (SNA) gateway allows
multiple LAN-attached workstations to access SNA hosts through one or
more physical connections to one or more hosts. A SNA gateway acts
as a protocol converter between workstations attached to a LAN and a
Naugle, et al. Standards Track [Page 2]
RFC 3049 TN3270E Location & Balancing January 2001
WAN host line. It typically would support the SNA protocols LU 0, 1,
2, 3, and dependent LU 6.2 (APPC). SNA gateways typically include a
TN3270E server capability.
LU Pool - The Logical Units (LUs) defined in the gateway can be
dedicated to a particular workstation or pooled among multiple
workstations. Pooling allows workstations to share common Logical
Units (LUs), which increases the efficiency of the LUs and reduces
the configuration and startup requirements at the host. When a
client connects to the gateway, the gateway retrieves an LU from the
pool to establish a session. The LU is returned to the pool for
access by other workstations when the session is ended.
Commserver Service Type Template - Commserver service type is defined
as an SNA Gateway server as previously defined above in this
terminology section. A template describing the attributes for this
service type is in section 7.2.
2. An overview of RFC 2165
RFC 2165, Service Location Protocol (SLP) [1], provides an automatic
way for clients to discover services within an administrative domain.
These services have various attributes associated with them from
which a client can base a service selection. The basic design
involves the use of three agent types. These are: User Agents
(UA's), Service Agents (SA's) and Directory Agents (DA's).
2.1 SLP Agents
User Agents are used to query Service Agents or Directory Agents.
They acquire/request service information based upon the desired
attributes and service needed for the user application.
Service Agents represent a specific service and advertise service
information.
Directory Agents act as a central collection point for service
registration information by Service Agents which is later requested
by "user agents" in "intranets".
2.2 Service Agents
The service registers itself with the service agent so that the SA
can start advertising this information over the network. The process
of registration consists of the service giving the SA all relevant
configuration information and attribute tag/value list pairs specific
to this service. The Service template is an abstract schema that
Naugle, et al. Standards Track [Page 3]
RFC 3049 TN3270E Location & Balancing January 2001
applies to the service type. The service template for TN3270E is
shown later, contains the URL which is the address of the server with
the port, which should be used to connect to it. The URL also
contains the service type which in this case is TN3270. The template
also contains all the other attributes associated with this service.
2.3 User Agents
The User Agent working on the TN3270E client's behalf retrieves
service information from the Service Agent(s) or a Directory Agent.
Based on the gathered information and required attributes the TN3270E
client or user can decide whether or not to connect with a particular
server. Based on the service advertisements from various TN3270E
servers, the client looks at the load attribute and can decide to
connect to the least loaded server. If by the time it connects to
that particular TN3270E server, the server becomes unavailable it can
try connecting to the next server in its list (ie: the second least
loaded server whose advertisement was retrieved by the client/user
agent).
3. TN3270E Server Environment and Load
TN3270E Servers are pervasive in today's networked environment. SLP
provides emulator clients with a way to discover TN3270E servers in
the network and session balance among the servers. The TN3270E
servers could be distributed across different SNA gateways with
different connection methods to hosts. The use of LU pools provides
an easy way for administrators to provide users access to hosts.
Administrators can add users to LU pools that have pre-configured
LU's with specific attributes, like LU types and model types.
These LU pools would typically have LUs from several different
gateways assigned, and as members of the LU pool make TN3270E session
connections, they would be making connections to different TN3270E
servers, with different load factors, so that session balancing could
be accomplished. The use of LU pools is not a requirement for SLP
and session balancing. A TN3270E client could obtain a session by
using SLP and session balancing to locate the least loaded server in
the network. On a service request a wild card "*" could be used when
asking for LUPOOL if the emulator doesn't care which device types are
supported in given pools or if it can assume given pools support only
certain device types.
3.1 TN3270E Server Load
TN3270E servers providing load information, SHOULD include number of
sessions available, not in current use, as part of the calculation in
determining the total load for the server. There can be other
Naugle, et al. Standards Track [Page 4]
RFC 3049 TN3270E Location & Balancing January 2001
factors that might have an effect on server load. An example would
be if a server is not dedicated to only SNA traffic, and is handling
other processes, like file services and print services, etc. It is
beyond the scope of this document to standardize the method of
individual server load calculations. Different vendors server's may
calculate load information based upon factors they consider
important, and methods for calculating load may change over time.
If the TN3270E server coexists in a network with other TN server
implementations using SLP for session balancing, TN3270E server load
could be adjusted to compensate for differences in load calculations.
One way to allow TN3270E server administrators to compensate for
differences in implementations of calculating server load measurement
is to provide the ability to modify the load calculation on the
TN3270E server. An element of control can be provided by allowing
the administrator to modify the load measurement, by using an
integral number between 0 and 100 (100 being the highest) to change
the load. This load measurement acts as an additional factor on the
server's actual load calculation, so that the administrator could
bias up or down, the likelihood of that server being selected by a
TN3270E client.
Load MUST be defined as one of the attributes for the TN3270E server.
The Load attribute provided at the server will allow clients to
determine which server to make a connection. If a UA provides only a
Service Type, in an Attribute Request, then the reply includes all
attributes and all values for that Service Type, and Load would be
included. Attribute Requests MAY include a select clause, so you
could be returned just load information. For more information on
Attribute Requests refer to Service Location Protocol [1].
An application could issue a Service Request to locate a TN3270E
server. Then an application designed to perform least-load location
of a TN3270E service, could issue a series of Attribute Requests to
obtain the load measurement of each server specified with a URL. It
would specify a select clause similar to the one below to receive
only load information.
URL = service:tn3270://9.37.51.254:23 Attribute filter = LOAD
The attribute LOAD would be returned along with its value. The
application could then issue other Attribute Request calls for each
URL.
Naugle, et al. Standards Track [Page 5]
RFC 3049 TN3270E Location & Balancing January 2001
The application would then select the least loaded server as a
connection target. If it tries to connect to a server and that
connection fails, it could then try to connect to the next least-
loaded server.
4. TN3270E Client Configuration
4.1 SLP Scope
Scope is a parameter used to control and manage access by clients to
servers in a network. It is the same as the Service Location
Protocol scope defined in RFC 2165 [1]. The control scope provides
is necessary for two reasons:
As your network, the number of clients, and the number of servers
grow, it becomes necessary to partition access to those servers by
the growing number of clients in order to reduce overall traffic on
the network. It allows administrators to organize users and servers
into administrative groups.
The meaning of the values of scope is defined by the administrator of
the network. These values can represent any entity. Commonly, they
fall along either departmental, geographical, or organizational
lines.
Each TN3270E server can be assigned to a single scope or multiple
scopes. TN3270E clients using these servers can be configured for a
single specific scope. If TN3270E clients are not configured with a
scope they MUST use the scope "default".
SLP Service Agents and Directory Agents (DA) need to reside in the
network that support the TN3270E server with configured scopes.
Attribute information for Service Types pertaining to a specific
scope can be obtained from Directory Agents (DA). The DA will not
return a result unless the requested scope matches.
For more information on SLP scope refer to Service Location Protocol
[1].
4.2 DA Discovery time-out
The DA Discovery time-out value, is used to control how long the SLP
API must wait to discover Directory Agents (DAs) in the network. The
discovery request is a multicast, and the amount of time required to
gather all DA responses might vary depending on many factors. If
there are no DAs in the network, this time-out value can be set to
Naugle, et al. Standards Track [Page 6]
RFC 3049 TN3270E Location & Balancing January 2001
zero to indicate that no DA discovery is to be done. The time-out is
expressed in milliseconds. Time-out intervals and default values
should be handled as described in RFC 2165 [1].
4.3 SA Multicast time-out
The SA Multicast time-out value, is used to control how long the SLP
API must wait to discover services, attributes, or service types in a
network without at least one DA that supports the scope of the
request. In this situation, these requests are multicast and the
User Agent waits the time-out value to gather the multiple responses
that are returned. The time-out is expressed in milliseconds. Time-
out intervals and default values should be handled as described in
RFC 2165 [1].
5. TN3270E Client Implementation Information
5.1 Overview
A TN3270E client that implements TN3270E SLP session balancing does
not need to configure an IP Host Address or TCP Port for the TN3270E
server it desires to connect to. Instead, the IP Host Address and
TCP Port of the least loaded TN3270E server is discovered by using
the SLP session balancing described in this document.
The discovery of the least loaded TN3270E server is done entirely
outside of and before the TN3270E telnet negotiation. Once the IP
Host address and TCP Port of the least loaded TN3270E server is
discovered, the TN3270E client can then start normal TN3270E telnet
negotiation.
The TN3270E client MUST allow for configuration of the following
parameters. These SLP specific configuration items are covered by
configuration parameters in the SLP API [5].
Enable SLP Session Balancing
This configuration parameter indicates whether or not SLP session
balancing is enabled. If it is enabled the following three
configuration parameters MUST also be configurable. If this
parameter is disabled, SLP session balancing is not supported and
normal TN3270E telnet negotiation is performed.
Scope Name The scope name is a text string that specifies a group of
TN3270E servers. The scope name can be used to identify groups of
TN3270E servers in a departmental or geographic setting. For
Naugle, et al. Standards Track [Page 7]
RFC 3049 TN3270E Location & Balancing January 2001
example, if the scope name is Building-D, then the SLP session
balancing would search all TN3270E servers in the Building-D scope to
find the least loaded TN3270E server.
If the scope name is blank, then the scope name is not used. This is
referred to as unscoped. It should be noted as in section 4.1 above
that any reference to unscoped services applies to Service Location
Protocol version 1 only [1]. Service Location Protocol version 2
doesn't allow unscoped services but does allow the use of default
scope [4]. In this case all TN3270E servers, with or without scope
names, can be used to satisfy the request for least loaded TN3270E
servers. In order to cut down on network overhead, it is recommended
that either all servers be scoped or no servers be scoped. Refer
back to section 4.1 for more discussion of scope.
DA Discovery Time Out Value
This value is specified in milliseconds and is fully described in
section 4.2 of this document.
SA Multicast Time Out Value
This value is specified in milliseconds and is fully described in
section 4.3 of this document.
5.2 How to obtain the list of TN3270E servers supporting SLP
A TN3270E client that implements SLP session balancing uses API calls
to obtain the list of TN3270E servers supporting SLP session
balancing.
The following Service Location Version 2 API [5] calls, could be used
with TN3270E SLP session balancing:
SLPOpen - returns an SLPHandle handle to be used
SLPFindSrvs - issues the query for services
SLPFindAttrs - returns service attributes matching the attribute ids
for the indicated service URL or service type.
SLPClose - frees all resources associated with the handle.
Naugle, et al. Standards Track [Page 8]
RFC 3049 TN3270E Location & Balancing January 2001
5.3 TN3270E Sample Client Flow
5.3.1 Open the SLP connection
The TN3270E client must first open a handle with the SLP User Agent.
For Service Location Protocol version 2, SLPOpen API call [5] The SA
multicast time out and DA discovery time out values would be passed
as parameters to the SLPOpen API call.
5.3.2 Query the list of TN3270E servers
The TN3270E client then queries for the list of TN3270E servers
supporting SLP. This is done by using the Service Request API call.
The request string contains information that determines which type of
TN3270E servers that this client desires to connect to. The request
string can contain the scope name, pool name, session type and 3270
screen size.
The SLPv1 query string has the following format:
TN3270/<scope name>/LUPOOL/ == <pool name><TAB><device type>
The <scope name> is the name of the scope that is configured for the
TN3270E client. If the scope is blank or null (unscoped request),
then the scope is not inserted into the request string.
The <pool name> is a 1 to 8 character upper case string that
indicates the name of the pool to which the TN3270E client desires to
connect. For SLP session balancing, the same pool name must be
configured on different TN3270E servers.
The <TAB> is the '/t' tab character which is hexadecimal 0x09. the
<TAB> is a literal and is used as a separator.
The <device type> can be any of the following:
3270DSC for TN3270E device type IBM-3287-1
3270002 for TN3270E device types IBM-3278-2 and IBM-3278-2-E
3270003 for TN3270E device types IBM-3278-3 and IBM-3278-3-E
3270004 for TN3270E device types IBM-3278-4 and IBM-3278-4-E
3270005 for TN3270E device types IBM-3278-5 and IBM-3278-5-E
* for TN3270E device type IBM-DYNAMIC
Naugle, et al. Standards Track [Page 9]
RFC 3049 TN3270E Location & Balancing January 2001
Example:
For a TN3270E client searching for TN3270E servers in the ENGINEERING
scope for a model 2 screen size and LUPOOL name pool2, the following
request SLPv1 string would be constructed:
"TN3270/ENGINEERING/LUPOOL/ == POOL2<TAB>3270002"
Note: The " characters before and after the string are not part of
the request string.
5.3.3 Forward Looking Example for SLPv2
For SLPv2 the scope and service type are no longer part of the query
string. These are now separate fields in the message. The service
type name is required to have the "service:" prepended. The service
type field would look like "service:TN3270", and the scope field
would be a comma separated list of scopes. A scope name is always
required in SLPv2, if no other name is known, the scope name
"DEFAULT" is used. The example below uses the same parameters as
used in above section 5.3.2.
Example: Service Type: service:TN3270 Scope string: ENGINEERING The
query string would have the following format:
(LUPOOL=<POOL2> <32700002>)
In SLPv2 queries, all whitespace is compressed to a single space
character during matching, so the identity of the separator character
does not matter. The tab character could be added for readability,
but it will not affect the outcome of the query.
5.3.4 Determine loading of each TN3270E server
An attribute request for "service:tn3270e" specifying the attribute
LOAD can be made and you will get back all the available loads. Say
these are 35,88,78. You can then issue a service request for all
tn3270E servers with "LOAD<40" for instance. Even if the load
changes between the time you get the attribute reply and when you
issue the request, you will still get the best the network has to
offer.
The TN3270E client then uses the TN3270E server's IP Host address to
start normal Telnet TN3270E negotiation.
Naugle, et al. Standards Track [Page 10]
RFC 3049 TN3270E Location & Balancing January 2001
5.4 Recommendations
The TN3270E client SHOULD display the IP hostname and TCP Port that
is being used for the TN3270E connection. This gives the user
knowledge of which TN3270E server the session is connected to. For
example, the IP host address could be displayed in the window system
status bar.
The TN3270E client SHOULD display the resource name that is returned
by the TN3270E server after connection and TN3270E negotiation is
completed. This gives the user knowledge of which LU resource name
in the LUPOOL the session is connected to. For example, the resource
name could be displayed in the Windows status bar, or even in the
3270 OIA line.
In the event that after the TN3270E client has determined the least
loaded server and the connection to that server fails for some
reason, the connection should be closed and an attempt made to
connect to other TN3270E servers in the list of least loaded servers.
For example, a TN3270E server may reject a connection to a specific
pool if the pool is full, or if the device type does not match what
is available in the pool. If this occurs, then an attempt to other
least loaded TN3270E servers SHOULD be performed.
6. Sample Trace Flow of SLP and Session Balancing
This sample trace flow is provided for informational purposes only.
SLP API: Service Request: TN3270//LUPOOL == POOL2 3270002/
SLP API: Service Reply: service:tn3270://206.109.45.139:23
SLP API: Service Reply: service:tn3270://206.109.45.140:23
Connecting to 206.109.45.139:23...
TerminalType=NVT
Connection established
Recv <- DO TN3270E
Send -> WILL TN3270E
TerminalType=TN3270E
Recv <- SEND DEVICE_TYPE
Naugle, et al. Standards Track [Page 11]
RFC 3049 TN3270E Location & Balancing January 2001
Send -> DEVICE_TYPE REQUEST IBM-3278-2-E CONNECT POOL2
Recv <- DEVICE_TYPE IS IBM-3278-2-E CONNECT TN8003
Send -> FUNCTIONS REQUEST BIND_IMAGE SYSREQ
Recv <- FUNCTIONS IS BIND_IMAGE SYSREQ
7. Service Templates and Service Registration
The Service Location Protocol uses the "service:" URL scheme name to
define URLs called "service: URLs". These schemes provide a way for
clients to obtain configuration information that is needed to
establish a 3270 session through the TN3270E server. The Service
Location Protocol provides for service: URLs to be registered and
discovered.
Service Registration These service registrations contain a service:
URL, and possible attributes associated with that service. The
service registration information are shown below for the server.
Service Templates Service templates are documents defining in a
formal way the attributes associated with that service that a client
may want to use. For more information on service templates please
refer to, Service Templates and service: Schemes. [2]. The server
service template and TN3270 service templates are shown below.
7.1 The TN3270E Service Type Template
The 'service:tn3270:' template defined below conforms to the grammar
described in "Service Templates and service: Schemes". Please refer
to [2] for detailed explanation of the syntax.
Name of submitters: Jim Naugle <jnaugle@us.ibm.com>
Gregg Ledford <gledford@zephyrcorp.com>
K. Kasthurirangan <kasthuri@us.ibm.com>
Language of service template: en
Security Considerations:
Service Location Protocol can help clients discover security services
supported by the TN3270E server. If security services are important
or required, using SLP authentication, and protected scopes in
Service Location Protocol version 1 is recommended [1]. Well known
ciphersuite names are used in the template [3].
Naugle, et al. Standards Track [Page 12]
RFC 3049 TN3270E Location & Balancing January 2001
Template text:
----------------------template begins here -------------------------
template-type=tn3270e
template-version=1.0
template-description=
The tn3270 service provides 3270 gateway access to an SNA network
via the TN3270 protocol. The attributes reflect the types of 3270
devices, LU Pools, and load information available on the server.
template-url-syntax=
# service:tn3270://<hostname>:<port>
# <hostname>
# <port>
load=integer
# This is the load balancing quantity to use in determining the
# least loaded TN3270E server to attach to for the service. The
#range of valid values is an integral 0 to 100 with 0 indicating the
#lowest possible load and 100 the highest
LUPool=string X M L
# This attribute takes on one or more values as defined below.
# The <TAB> char. 0x09 is literal and will be used as a separator.
#
#
# <pool name> = <name> / <name> "<TAB>" <dev type>
# <name> = 1*ALPHANUM
# "3270DSC"
#
#
#
#
# Identifies the LU pool names of LU pools available for use on this
# service with the associated device types supported in each pool.
# Each value is a record where the first token is the pool name of
# the pool and the second token is a device type supported in that
# pool. A pool name without a device type indicates that LUs of
# unknown type are included in the pool. Records associated with a
# given pool name are repeated for each supported device type. A
# given pool is included in a registration request if any PU profile
# that contributes at least one LU to the pool is active on the
# server. The range of valid dev_types are:
#
# dev_type Meaning
#
Naugle, et al. Standards Track [Page 13]
RFC 3049 TN3270E Location & Balancing January 2001
# 3270002 Lu Type 2 Model 2
#
# 3270003 Lu Type 2 Model 3
#
# 3270004 Lu Type 2 Model 4
#
# 3270005 Lu Type 2 Model 5
#
# 3270DSC Printer LU
#
BIND=keyword
# The server supports the SNA bind image TN3270E function.
DATA=keyword
# The non-SNA 3270 data stream is supported by server.
RESPONSES=keyword
# The server supports SNA response mode.
SCS=keyword
# The server supports SNA 3270 SCS data stream.
SYSREQ=keyword
# The SYSREQ keyboard key is supported on server.
RFC1576=keyword
# RFC1576 options supported.
RFC1646=keyword
# RFC1646 options supported.
RFC2355=keyword
# RFC2355 options supported.
security=string M
# This is the security technique supported on the server.
# The defined values are:
NONE
SSLV3
Ciphersuites=string M
# Cipher specifications supported by this server.
# Additional values will be defined in future templates.
NULL_NULL,
NULL_MD5,
NULL_SHA,
RC4_MD5_EXPORT,
Naugle, et al. Standards Track [Page 14]
RFC 3049 TN3270E Location & Balancing January 2001
RC4_MD5_US,
RC4_SHA_US,
RC2_MD5_EXPORT,
DES_SHA_EXPORT,
TRIPLE_DES_SHA_US
platform=string X
# This is the network operating system platform underlying the
# advertising service. The defined values are:
#
# IW Server uses IntranetWare or NetWare operating system
#
# NT Server uses the Microsoft NT operating system
#
# OS2 Server uses the OS2 operating system
#
# AIX Server uses the AIX operating system
#
IW,NT,OS2,AIX
protocol=string X
# This is the protocol(s) supported by the server providing this
# service. The defined values are:
#
# IP Server supports client connections over IP (TCP/IP or
# UDP/IP)
#
# IPX Server supports client connections over IPX (SPX/IPX)
#
IP,IPX
server name=string
# This is the name of the server that was configured during
# installation.
release=string X
# This is the version and release level of the server advertising
# services. Its format is vv.rr.mm where "vv" is the major version
# number, "rr" is the minor version number, and "mm" is the
# modification level. All numbers are padded on the left with zeroes
# to two characters.
# Example: version 3, release 0, mod level 0 is "03.00.00"
------------------template ends here -------------------------------
Naugle, et al. Standards Track [Page 15]
RFC 3049 TN3270E Location & Balancing January 2001
7.2 Server Service Type Template
The 'service:commserver:' template defined below conforms to the
grammar described in "Service Templates and service: Schemes".
Please refer to [2] for detailed explanation of the syntax.
Name of submitters: Jim Naugle <jnaugle@us.ibm.com>
Gregg Ledford <gledford@zephyrcorp.com>
K. Kasthurirangan <kasthuri@us.ibm.com>
Language of service template: en
Security Considerations:
Service Location Protocol can help clients discover security
services supported by the TN3270E server. If security services are
important or required, using SLP authentication, and protected
scopes [1] is recommended.
Template text:
-------------------template begins below this line------------------
template-type=commserver
template-version=1.0
template-description=
The server service type is registered whenever the communications
software is loaded on the server. It describes generic attributes of
the server. These attributes are also repeated on the other service
types provided.
template-url-syntax=
# service:commserver://<hostname>:<port>
# <hostname>
# <port>
platform=string X
# This is the network operating system platform underlying the
# advertising service. The defined values are:
#
# IW Server uses Novell IntranetWare or NetWare operating
# system
# NT Server uses the Microsoft NT operating system
#
# OS2 Server uses the OS2 operating system
#
# AIX Server uses the AIX operating system
#
IW,NT,OS2,AIX
Naugle, et al. Standards Track [Page 16]
RFC 3049 TN3270E Location & Balancing January 2001
protocol=string X
# This is the protocol(s) supported by the server providing this
# service. The defined values are:
#
# IP Server supports client connections over IP (TCP/IP or
# UDP/IP)
#
# IPX Server supports client connections over IPX (SPX/IPX)
#
IP,IPX
server name=string
# This is the name of the server that was configured during
# installation.
release=string X
# This is the version and release level of the commserver
# advertising services. Its format is vv.rr.mm where "vv" is the
# major version number, "rr" is the minor version number, and "mm"
# is the modification level. All numbers are padded on the left with
# zeroes to two characters.
#
# Example: version 3, release 0, mod level 0 is "03.00.00"
---------------------template ends above this line---------------------
7.3 Template Contact Information
Jim Naugle <jnaugle@us.ibm.com>
Kasthuri Kasthurirangan <kasthuri@us.ibm.com>
Gregg Ledford <gledford@zephyrcorp.com>
7.4 Security Considerations
Service type templates provide information that is used to interpret
information obtained by the Service Location Protocol. If these
templates are modified or if false templates are distributed,
services may not correctly register themselves, or clients might not
be able to interpret service information.
The service: URLs themselves specify the service access point and
protocol for a particular service type. These service: URLs could be
distributed and indicate the location of a service other than that
normally wanted to used. SLP [1] provides an authentication
mechanism that allows service: URLs of registered services to be
signed and for the signatures to be verified by clients.
Naugle, et al. Standards Track [Page 17]
RFC 3049 TN3270E Location & Balancing January 2001
Service Location Protocol can help clients discover security services
supported by the TN3270E server. If security services are important
or required, using SLP authentication, and protected scopes [1] is
recommended.
7.5 Sample TN3270 Service Registration Message
URL: service:tn3270://<addr-spec>:<port-number> Attributes:
[(SCOPE=<string>),]
(RELEASE=03.00.00),
(PLATFORM=IW),
(PROTOCOL=IP),
(SERVERNAME=<string>),
(LOAD=<integer 0 to 100>),
[(LUPOOL=pool-name0/tANY,
pool-name1/tdevice_type1,
pool-name2/tdevice-type2, ...
pool-namen/tdevice-typen)]
BIND,
DATA,
RESPONSES,
SCS,
SYSREQ,
(SECURITY=NONE),
RFC1576,
RFC1646,
RFC2355
Naugle, et al. Standards Track [Page 18]
RFC 3049 TN3270E Location & Balancing January 2001
7.6 Sample Server Service Registration Message
URL:service:commserver://<addr-spec>:<port-number>
Attributes: [(SCOPE=<string>),]
(RELEASE=03.00.00),
(PLATFORM=IW),
(PROTOCOL=IP),
(SERVERNAME=<string>)
8. References
[1] Veizades, J., Guttman, E., Perkins, C., and S. Kaplan, "Service
Location Protocol", RFC 2165, July 1997.
[2] Guttman, E., Perkins, C. and J. Kempf, "Service Templates and
service: Schemes", RFC 2609, June 1999.
[3] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC
2246, January 1999.
[4] Guttman, E., Perkins, C., Veizades, J. and M. Day, "Service
Location Protocol Version 2", RFC 2608, June 1999.
[5] Kempf, J. and E. Guttman, "An API for Service Location", RFC
2614, June 1999.
[6] Bradner, S., "Key Words for Use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
Naugle, et al. Standards Track [Page 19]
RFC 3049 TN3270E Location & Balancing January 2001
9. Authors' Addresses
Jim Naugle
IBM
P.O. Box 12195
Research Triangle Park, N.C. 27709-2195
USA
Phone: (919) 254-8789
EMail: jnaugle@us.ibm.com
Kasthuri Kasthurirangan
IBM
P.O. Box 12195
Research Triangle Park, N.C. 27709-2195
USA
Phone: (919) 254-5721
EMail: kasthuri@us.ibm.com
Gregg Ledford
Zephyr Development Corporation
8 Greenway Plaza Suite 1400
Houston, Texas 77046
USA
Phone: (713) 623-0089
EMail: gledford@zephyrcorp.com
Naugle, et al. Standards Track [Page 20]
RFC 3049 TN3270E Location & Balancing January 2001
10. Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Naugle, et al. Standards Track [Page 21]