💾 Archived View for perso.pw › blog › articles › guix-wireguard.gmi captured on 2023-05-24 at 18:14:42. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2023-01-29)

🚧 View Differences

-=-=-=-=-=-=-

How to use WireGuard VPN on Guix

Comment on Mastodon

Introduction

Today I had to setup a Wireguard tunnel on my Guix computer (my email server is only reachable from Wireguard) and I struggled a bit to understand from the official documentation how to put the pieces together.

In Guix (the operating system, and not the foreign Guix on an existing distribution) you certainly have a /etc/config.scm file that defines your system. You will have to add the Wireguard configuration in it after generating a private/public keys for your Wireguard.

Guix project website

Guix Wireguard VPN documentation

Key generation

In order to generate Wireguard keys, install the package Wireguard with "guix install wireguard".

# umask 077 # this is so to make files only readable by root
# install -d -o root -g root -m 700 /etc/wireguard
# wg genkey > /etc/wireguard/private.key
# wg pubkey < /etc/wireguard/private.key > /etc/wireguard/public

Configuration

Edit your /etc/config.scm file, in your "(services)" definition, you will define your VPN service. In this example, my Wireguard server is hosted at 192.168.10.120 on port 4433, my system has the IP address 192.168.5.1, I also defines my public key but my private key is automatically picked up from /etc/wireguard/private.key

(services (append (list
      (service wireguard-service-type
             (wireguard-configuration
              (addresses '("192.168.5.1/24"))
              (peers
               (list
                (wireguard-peer
                 (name "myserver")
                 (endpoint "192.168.10.120:4433")
                 (public-key "z+SCmAMgNNvkeaD0nfBu4fCrhk8FaNCa1/HnnbD21wE=")
                 (allowed-ips '("192.168.5.0/24"))))))))
      %desktop-services))

If you have the default "(services %desktop-services)" you need to use "(append " to merge %desktop-services and new services all defined in a "(list ... )" definition.

The "allowed-ips" field is important, Guix will automatically make routes to these networks through the Wireguard interface, if you want to route everything then use "0.0.0.0/0" (you will require a NAT on the other side) and Guix will make the required work to pass all your traffic through the VPN.

At the top of the config.scm file, you must add "vpn" in the services modules, like this:

# I added vpn to the list
(use-service-modules vpn desktop networking ssh xorg)

Once you made the changes, you can use "guix system reconfigure" to make the changes, if you do multiples reconfigure it seems Wireguard doesn't reload correctly, you may have to use "herd restart wireguard-wg0" to properly get the new settings (seems a bug?).

Conclusion

As usual, setting Wireguard is easy but the functional way make it a bit different. It took me some time to figure out where I had to define the Wireguard service in the configuration file.