💾 Archived View for mirrors.apple2.org.za › archive › apple.cabi.net › FAQs.and.INFO › CPUandMore › … captured on 2023-05-24 at 23:47:12.
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
Path: news.uiowa.edu!news.physics.uiowa.edu!math.ohio-state.edu!howland.reston.ans.net!news-e1a.megaweb.com!newstf01.news.aol.com!newsbf02.news.aol.com!not-for-mail
From: rubywand@aol.com (RUBYWAND)
Newsgroups: comp.sys.apple2
Subject: Re: My //e fails to turn on!
Date: 12 Jan 1996 07:14:46 -0500
Organization: America Online, Inc. (1-800-827-6364)
Lines: 17
Sender: root@newsbf02.news.aol.com
Message-ID: <4d5jbm$d1j@newsbf02.news.aol.com>
References: <8B8A08A.02210015A8.uuout@digitec.co.za>
NNTP-Posting-Host: newsbf02.mail.aol.com
X-Newsreader: AOL Offline Reader
On 01/02/96, Alberto Roffe wrote to All:
AR> I am having some problems with my Apple //e! It fails to turn on! I
> have to turn its power switch on and off several times and sometimes
> wait a long time till it finally powers up!
If you decide to open up your PS, another thing to check is the
'start-up resistor'. Usually, this is a disk-shaped object in series with
the AC input located on the circuit board near the switch and AC cord
socket. It should have a designation like R1 (not C1 or C-anything). This
device-- sometimes called a "globar" resistor-- is supposed to suppress
turn-ON surge and then quickly drop in resistance. If it is cracked or a
lead is barely making contact, then the PS might behave the way you
describe.