💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc8173.txt captured on 2023-04-26 at 13:58:44.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) V. Shankarkumar
Request for Comments: 8173 L. Montini
Category: Standards Track Cisco Systems
ISSN: 2070-1721 T. Frost
Calnex Solutions Ltd.
G. Dowd
Microsemi
June 2017
Precision Time Protocol Version 2 (PTPv2)
Management Information Base
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in internets based on TCP
or IP. In particular, it defines objects for managing networks using
the Precision Time Protocol (PTP), specified in IEEE Std. 1588-2008.
This memo specifies a MIB module in a manner that is both compliant
to the Structure of Management Information version 2 (SMIv2) and
semantically identical to the peer SMIv1 definitions.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc8173.
Shankarkumar, et al. Standards Track [Page 1]
RFC 8173 PTPv2 MIB June 2017
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................3
1.1. Relationship to Other Profiles and MIBs ....................3
2. The SNMP Management Framework ...................................4
3. Overview ........................................................4
4. PTP MIB Definition ..............................................5
5. Security Considerations ........................................59
6. IANA Considerations ............................................61
7. References .....................................................62
7.1. Normative References ......................................62
7.2. Informative References ....................................63
Acknowledgements ..................................................63
Author's Addresses ................................................64
Shankarkumar, et al. Standards Track [Page 2]
RFC 8173 PTPv2 MIB June 2017
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
module for use with network management protocols in the Internet
community. In particular, it describes managed objects used for
managing PTP devices including ordinary clocks, transparent clocks,
and boundary clocks.
This MIB module is restricted to reading standard PTP data elements,
as described in [IEEE-1588-2008]. This enables it to monitor the
operation of PTP clocks within the network. It is envisioned that
this MIB module will complement other managed objects to be defined
that will provide more detailed information on the performance of PTP
clocks supporting the Telecom Profile defined in [G.8265.1] and any
future profiles that may be defined. Those objects are considered
out of scope for the current document.
Similarly, this MIB module is read-only and not intended to provide
the ability to configure PTP clocks. Since PTP clocks are often
embedded in other network elements such as routers, switches, and
gateways, this ability is generally provided via the configuration
interface for the network element.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
1.1. Relationship to Other Profiles and MIBs
This MIB module is intended to be used with the default PTP profile
described in [IEEE-1588-2008] when running over the IP network layer.
As stated above, it is envisioned that this MIB module will
complement other managed objects to be defined to monitor and measure
the performance of PTP clocks supporting specific PTP profiles, e.g.,
the Telecom Profile defined in [G.8265.1].
Some other PTP profiles have their own MIB modules defined as part of
the profile, and this MIB module is not intended to replace those MIB
modules.
Shankarkumar, et al. Standards Track [Page 3]
RFC 8173 PTPv2 MIB June 2017
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
3. Overview
The objects defined in this MIB module are to be used when describing
the Precision Time Protocol (PTP), as defined in [IEEE-1588-2008].
Section 6 of [IEEE-1588-2008] provides an overview of synchronization
networks using PTP.
Terms used in this document have meanings as defined in Section 3.1
of [IEEE-1588-2008].
Shankarkumar, et al. Standards Track [Page 4]
RFC 8173 PTPv2 MIB June 2017
4. PTP MIB Definition
PTPBASE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
Gauge32,
Unsigned32,
Counter32,
Counter64,
mib-2,
Integer32
FROM SNMPv2-SMI
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
DisplayString,
AutonomousType
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB;
ptpbaseMIB MODULE-IDENTITY
LAST-UPDATED "201705300000Z"
ORGANIZATION "TICTOC Working Group"
CONTACT-INFO
"WG Email: tictoc@ietf.org
Vinay Shankarkumar
Cisco Systems
Email: vinays@cisco.com
Laurent Montini
Cisco Systems
Email: lmontini@cisco.com
Tim Frost
Calnex Solutions Ltd.
Email: tim.frost@calnexsol.com
Greg Dowd
Microsemi Inc.
Email: greg.dowd@microsemi.com"
Shankarkumar, et al. Standards Track [Page 5]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"The MIB module for PTP version 2
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Overview of PTP version 2 (IEEE Std. 1588-2008)
[IEEE-1588-2008] defines a protocol enabling precise
synchronization of clocks in measurement and control systems
implemented with packet-based networks, the Precision Time
Protocol version 2 (PTPv2). This MIB module does not address
PTPv1, the earlier version defined in IEEE Std. 1588-2002.
The protocol is applicable to network elements communicating
using IP. The protocol enables heterogeneous systems that
include clocks of various inherent precision, resolution, and
stability to synchronize to a grandmaster clock.
The protocol supports system-wide synchronization accuracy in
the sub-microsecond range with minimal network and local clock
computing resources. [IEEE-1588-2008] uses UDP/IP or
Ethernet and can be adapted to other mappings. It includes
formal mechanisms for message extensions, higher sampling rates,
correction for asymmetry, a clock type to reduce error
accumulation in large topologies, and specifications on how to
incorporate the resulting additional data into the
synchronization protocol. [IEEE-1588-2008] also defines
conformance and management capability.
MIB description
This MIB module supports the Precision Time Protocol version 2
(PTPv2, hereafter designated as PTP) features of network element
system devices, when using the default PTP profile described in
[IEEE-1588-2008] when running over the IP network layer.
It is envisioned that this MIB module will complement other
managed objects to be defined to monitor and measure the
performance of the PTP devices and telecom clocks supporting
specific PTP profiles.
Shankarkumar, et al. Standards Track [Page 6]
RFC 8173 PTPv2 MIB June 2017
Some other PTP profiles have their own MIB modules defined as
part of the profile, and this MIB module is not intended to
replace those MIB modules.
Technical terms used in this module are defined in
[IEEE-1588-2008].
The MIB module refers to sections of [IEEE-1588-2008].
Abbreviations:
E2E End-to-End
EUI Extended Unique Identifier
GPS Global Positioning System
IANA Internet Assigned Numbers Authority
IP Internet Protocol
NTP Network Time Protocol (see [RFC5905])
P2P Peer-to-Peer
PTP Precision Time Protocol
TAI International Atomic Time
UDP User Datagram Protocol
UTC Coordinated Universal Time
References:
[IEEE-1588-2008] IEEE Standard for A Precision Clock
Synchronization Protocol for Networked Measurement and
Control Systems, IEEE Std. 1588-2008, July 2008.
The below table specifies the object formats of the various
textual conventions used.
Data type mapping Textual Convention SYNTAX
------------------- --------------------- ------------------
5.3.2 TimeInterval PtpClockTimeInterval OCTET
STRING(SIZE(1..255))
5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6))
5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8))
5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535)
5.3.7 ClockQuality PtpClockQualityClassType
"
REVISION "201705300000Z"
DESCRIPTION "Initial version of this MIB module, published
as RFC 8173."
::= { mib-2 241 }
Shankarkumar, et al. Standards Track [Page 7]
RFC 8173 PTPv2 MIB June 2017
-- Textual Conventions
PtpClockDomainType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The Domain is identified by an integer, the domainNumber, in
the range of 0 to 255. An integer value that is used to assign
each PTP device to a particular domain."
REFERENCE "Section 7.1 ('Domains') and Table 2 ('domainNumber')
of [IEEE-1588-2008]"
SYNTAX Unsigned32 (0..255)
PtpClockIdentity ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The clock identity is an 8-octet array and will be presented in
the form of a character array. Network byte order is assumed.
The value of the PtpClockIdentity should be taken from the
IEEE EUI-64 individual assigned numbers as indicated in
Section 7.5.2.2.2 of [IEEE-1588-2008]. It can also be a
non-EUI-64 address as defined in Section 7.5.2.2.3 of
[IEEE-1588-2008].
The clock identifier can be constructed from existing EUI-48
assignments."
REFERENCE "Section 7.5.2.2.1 ('General') of [IEEE-1588-2008]"
SYNTAX OCTET STRING (SIZE (8))
PtpClockInstanceType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The instance of the clock of a given clock type in a given
domain."
SYNTAX Unsigned32 (0..255)
PtpClockIntervalBase2 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The interval included in message types Announce, Sync,
Delay_Req, and Pdelay_Req as indicated in Section 7.7.2.1 of
[IEEE-1588-2008]."
Shankarkumar, et al. Standards Track [Page 8]
RFC 8173 PTPv2 MIB June 2017
REFERENCE "Section 7.7.2.1 ('General interval specification') of
[IEEE-1588-2008]"
SYNTAX Integer32 (-128..127)
PtpClockMechanismType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock type based on whether end-to-end or peer-to-peer
mechanisms are used. The mechanism used to calculate the Mean
Path Delay as indicated in Table 9 of [IEEE-1588-2008]."
REFERENCE
"Sections 8.2.5.4.4 ('portDS.delayMechanism'),
6.6.4 ('Measuring link propagation delay in clocks supporting
peer-to-peer path correction'), and
7.4.2 ('communication Path asymmetry') of [IEEE-1588-2008]."
SYNTAX INTEGER {
e2e(1),
p2p(2),
disabled(254)
}
PtpClockPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index identifying a specific PTP port on a PTP node."
REFERENCE
"Sections 7.5.2.3 ('portNumber') and 5.3.5 ('PortIdentity') of
[IEEE-1588-2008]"
SYNTAX Unsigned32 (0..65535)
PtpClockPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the value of the current state of the protocol engine
associated with this port."
REFERENCE
"Sections 8.2.5.3.1 ('portState') and 9.2.5 ('State machines')
of [IEEE-1588-2008]"
SYNTAX INTEGER {
initializing(1),
faulty(2),
disabled(3),
listening(4),
preMaster(5),
Shankarkumar, et al. Standards Track [Page 9]
RFC 8173 PTPv2 MIB June 2017
master(6),
passive(7),
uncalibrated(8),
slave(9)
}
PtpClockPortTransportTypeAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The clock port transport protocol address used for this
communication between the clock nodes. This is a string
corresponding to the address type as specified by the
transport type used. The transport types can be defined
elsewhere, in addition to the ones defined in this document.
This can be an address of type IP version 4, IP version 6,
Ethernet, DeviceNET, ControlNET, or IEC61158. The OCTET STRING
representation of the OID of ptpbaseWellKnownTransportTypes
will be used in the values contained in the OCTET STRING."
REFERENCE "Annex D (IPv4), Annex E (IPv6), Annex F (Ethernet),
Annex G (DeviceNET), Annex H (ControlNET), and
Annex I (IEC61158) of [IEEE-1588-2008]"
SYNTAX OCTET STRING (SIZE (1..255))
PtpClockProfileType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Clock Profile used. A profile is the set of allowed PTP
features applicable to a device."
REFERENCE "Sections 3.1.30 ('profile') and 19.3 ('PTP
profiles') of [IEEE-1588-2008]"
SYNTAX INTEGER {
default(1),
telecom(2),
vendorspecific(3)
}
PtpClockQualityAccuracyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in Section 5.3.7,
Section 7.6.2.5, and Table 6 of [IEEE-1588-2008].
The following values are not represented in the enumerated
values.
Shankarkumar, et al. Standards Track [Page 10]
RFC 8173 PTPv2 MIB June 2017
0x01-0x1F Reserved
0x32-0x7F Reserved
It is important to note that Section 7.1.1 of RFC 2578 allows
for gaps and for enumerated values to start at zero when
indicated by the protocol."
REFERENCE
"Section 5.3.7 ('ClockQuality'), Section 7.6.2.5
('clockAccuracy'), and Table 6 ('clockAccuracy enumeration')
of [IEEE-1588-2008]"
SYNTAX INTEGER {
-- reserved00(0:31), 0x00 to 0x1F
nanoSecond25(32), -- 0x20
nanoSecond100(33), -- 0x21
nanoSecond250(34), -- 0x22
microSec1(35), -- 0x23
microSec2dot5(36), -- 0x24
microSec10(37), -- 0x25
microSec25(38), -- 0x26
microSec100(39), -- 0x27
microSec250(40), -- 0x28
milliSec1(41), -- 0x29
milliSec2dot5(42), -- 0x2A
milliSec10(43), -- 0x2B
milliSec25(44), -- 0x2C
milliSec100(45), -- 0x2D
milliSec250(46), -- 0x2E
second1(47), -- 0x2F
second10(48), -- 0x30
secondGreater10(49), -- 0x31
unknown(254) -- 0xFE
-- reserved255(255), 0xFF
}
PtpClockQualityClassType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in Section 5.3.7,
Section 7.6.2.4, and Table 5 of [IEEE-1588-2008]."
REFERENCE "Section 5.3.7 ('ClockQuality'), Section 7.6.2.4
('clockClass'), and Table 5 ('clockClass
specifications') of [IEEE-1588-2008]."
SYNTAX INTEGER {
-- reserved(0), 0x00
-- reserved(1:5), 0x01 to 0x05
clockclass6(6), -- 0x06
Shankarkumar, et al. Standards Track [Page 11]
RFC 8173 PTPv2 MIB June 2017
clockclass7(7), -- 0x07
-- reserved(8), 0x08
-- reserved(9:10), 0x09 to 0x0A
-- reserved(11:12), 0x0B, 0x0C
clockclass13(13), -- 0x0D
clockclass14(14), -- 0x0E
-- reserved(15:51), 0x0F to 0x33
clockclass52(52), -- 0x34
-- reserved(53:57), 0x35 to 0x39
clockclass58(58) -- 0x3A
-- reserved(59:67), 0x3B to 0x43
-- otherprofiles(68:122), 0x44 to 0x7A
-- reserved(123:127), 0x7B to 0x7F
-- reserved(128:132), 0x80 to 0x84
}
PtpClockRoleType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Clock Role. The protocol generates a master-slave
relationship among the clocks in the system.
Clock Role Value
-------------------------
Master clock 1
Slave clock 2 "
SYNTAX INTEGER {
master(1),
slave(2)
}
PtpClockStateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock state returned by a PTP engine.
Clock State Value
------------------------
Freerun state 1
Holdover state 2
Acquiring state 3
Freq_locked state 4
Phase_aligned state 5 "
SYNTAX INTEGER {
freerun(1),
holdover(2),
acquiring(3),
frequencyLocked(4),
Shankarkumar, et al. Standards Track [Page 12]
RFC 8173 PTPv2 MIB June 2017
phaseAligned(5)
}
PtpClockTimeInterval ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"This textual convention corresponds to the TimeInterval
structure indicated in Section 5.3.2 of [IEEE-1588-2008].
It will be presented in the form of a character array.
Network byte order is assumed."
REFERENCE
"Sections 5.3.2 ('TimeInterval') and 7.7.2.1 ('Timer interval
specification') of [IEEE-1588-2008]"
SYNTAX OCTET STRING (SIZE (1..255))
PtpClockTimeSourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in Sections 5.3.7,
Section 7.6.2.6, and Table 7 of [IEEE-1588-2008].
The following values are not represented in the enumerated
values.
0xF0-0xFE For use by alternate PTP profiles
0xFF Reserved
It is important to note that Section 7.1.1 of RFC 2578 allows
for gaps and for enumerated values to start at zero when
indicated by the protocol."
REFERENCE "Section 5.3.7 ('ClockQuality'), Section 7.6.2.6
('timeSource'), and Table 7 ('timeSource
enumeration') of [IEEE-1588-2008]."
SYNTAX INTEGER {
atomicClock(16), -- 0x10
gps(32), -- 0x20
terrestrialRadio(48), -- 0x22
ptp(64), -- 0x40
ntp(80), -- 0x50
handSet(96), -- 0x60
other(144), -- 0x90
internalOscillator(160) -- 0xA0
}
Shankarkumar, et al. Standards Track [Page 13]
RFC 8173 PTPv2 MIB June 2017
PtpClockTxModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Transmission mode.
Unicast: Using unicast communication channel.
Multicast: Using Multicast communication channel.
multicast-mix: Using multicast-unicast communication channel"
SYNTAX INTEGER {
unicast(1),
multicast(2),
multicastmix(3)
}
PtpClockType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock types as defined in the MIB module description."
REFERENCE
"Section 6.5.1 ('PTP device types') of [IEEE-1588-2008]."
SYNTAX INTEGER {
ordinaryClock(1),
boundaryClock(2),
transparentClock(3),
boundaryNode(4)
}
ptpbaseMIBNotifs OBJECT IDENTIFIER
::= { ptpbaseMIB 0 }
ptpbaseMIBObjects OBJECT IDENTIFIER
::= { ptpbaseMIB 1 }
ptpbaseMIBConformance OBJECT IDENTIFIER
::= { ptpbaseMIB 2 }
ptpbaseMIBSystemInfo OBJECT IDENTIFIER
::= { ptpbaseMIBObjects 1 }
ptpbaseMIBClockInfo OBJECT IDENTIFIER
::= { ptpbaseMIBObjects 2 }
Shankarkumar, et al. Standards Track [Page 14]
RFC 8173 PTPv2 MIB June 2017
ptpbaseSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of count information about the PTP system for all
domains."
::= { ptpbaseMIBSystemInfo 1 }
ptpbaseSystemEntry OBJECT-TYPE
SYNTAX PtpbaseSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains count information about a
single domain. New row entries are added when the PTP clock for
this domain is configured, while the unconfiguration of the PTP
clock removes them."
INDEX {
ptpDomainIndex,
ptpInstanceIndex
}
::= { ptpbaseSystemTable 1 }
PtpbaseSystemEntry ::= SEQUENCE {
ptpDomainIndex PtpClockDomainType,
ptpInstanceIndex PtpClockInstanceType,
ptpDomainClockPortsTotal Gauge32
}
ptpDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices. The Clock Domain is a logical
group of clocks and devices that synchronize with each other
using the PTP protocol.
0 Default domain
1 Alternate domain 1
2 Alternate domain 2
3 Alternate domain 3
4 - 127 User-defined domains
128 - 255 Reserved"
::= { ptpbaseSystemEntry 1 }
Shankarkumar, et al. Standards Track [Page 15]
RFC 8173 PTPv2 MIB June 2017
ptpInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this
domain."
::= { ptpbaseSystemEntry 2 }
ptpDomainClockPortsTotal OBJECT-TYPE
SYNTAX Gauge32
UNITS "ptp ports"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of clock ports
configured within a domain in the system."
::= { ptpbaseSystemEntry 3 }
ptpbaseSystemDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseSystemDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP system for all clock modes
-- ordinary, boundary, or transparent."
::= { ptpbaseMIBSystemInfo 2 }
ptpbaseSystemDomainEntry OBJECT-TYPE
SYNTAX PtpbaseSystemDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
clock mode for the PTP system. A row entry gets added when PTP
clocks are configured on the node."
INDEX { ptpbaseSystemDomainClockTypeIndex }
::= { ptpbaseSystemDomainTable 1 }
PtpbaseSystemDomainEntry ::= SEQUENCE {
ptpbaseSystemDomainClockTypeIndex PtpClockType,
ptpbaseSystemDomainTotals Unsigned32
}
Shankarkumar, et al. Standards Track [Page 16]
RFC 8173 PTPv2 MIB June 2017
ptpbaseSystemDomainClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseSystemDomainEntry 1 }
ptpbaseSystemDomainTotals OBJECT-TYPE
SYNTAX Unsigned32
UNITS "domains"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of PTP domains for this
particular clock type configured in this node."
::= { ptpbaseSystemDomainEntry 2 }
ptpbaseSystemProfile OBJECT-TYPE
SYNTAX PtpClockProfileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP profile implemented on the
system."
REFERENCE "Section 19.3 ('PTP profiles')
of [IEEE-1588-2008]"
::= { ptpbaseMIBSystemInfo 3 }
ptpbaseClockCurrentDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockCurrentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock currentDS for
all domains."
::= { ptpbaseMIBClockInfo 1 }
ptpbaseClockCurrentDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockCurrentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP clock currentDS for a domain."
REFERENCE
"Section 8.2.2 ('currentDS data set member
Shankarkumar, et al. Standards Track [Page 17]
RFC 8173 PTPv2 MIB June 2017
specifications') of [IEEE-1588-2008]"
INDEX {
ptpbaseClockCurrentDSDomainIndex,
ptpbaseClockCurrentDSClockTypeIndex,
ptpbaseClockCurrentDSInstanceIndex
}
::= { ptpbaseClockCurrentDSTable 1 }
PtpbaseClockCurrentDSEntry ::= SEQUENCE {
ptpbaseClockCurrentDSDomainIndex PtpClockDomainType,
ptpbaseClockCurrentDSClockTypeIndex PtpClockType,
ptpbaseClockCurrentDSInstanceIndex PtpClockInstanceType,
ptpbaseClockCurrentDSStepsRemoved Unsigned32,
ptpbaseClockCurrentDSOffsetFromMaster PtpClockTimeInterval,
ptpbaseClockCurrentDSMeanPathDelay PtpClockTimeInterval
}
ptpbaseClockCurrentDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockCurrentDSEntry 1 }
ptpbaseClockCurrentDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockCurrentDSEntry 2 }
ptpbaseClockCurrentDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockCurrentDSEntry 3 }
Shankarkumar, et al. Standards Track [Page 18]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockCurrentDSStepsRemoved OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Steps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current clock dataset stepsRemoved value.
This object specifies the distance measured by the number of
boundary clocks between the local clock and the foreign master
as indicated in the stepsRemoved field of Announce messages."
REFERENCE
"Section 8.2.2.2 ('stepsRemoved') of [IEEE-1588-2008]"
::= { ptpbaseClockCurrentDSEntry 4 }
ptpbaseClockCurrentDSOffsetFromMaster OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current clock dataset ClockOffset
value. The value of the computation of the offset in time
between a slave and a master clock."
REFERENCE
"Section 8.2.2.3 ('currentDS.offsetFromMaster')
of [IEEE-1588-2008]"
::= { ptpbaseClockCurrentDSEntry 5 }
ptpbaseClockCurrentDSMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current clock dataset
MeanPathDelay value.
The mean path delay between a pair of ports as measured by the
delay request-response mechanism."
REFERENCE
"Section 8.2.2.4 ('currentDS.meanPathDelay')
of [IEEE-1588-2008]"
::= { ptpbaseClockCurrentDSEntry 6 }
Shankarkumar, et al. Standards Track [Page 19]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockParentDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockParentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock parentDS for
all domains."
::= { ptpbaseMIBClockInfo 2 }
ptpbaseClockParentDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockParentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP clock parentDS for a domain."
REFERENCE
"Section 8.2.3 ('parentDS data set member specifications') of
[IEEE-1588-2008]"
INDEX {
ptpbaseClockParentDSDomainIndex,
ptpbaseClockParentDSClockTypeIndex,
ptpbaseClockParentDSInstanceIndex
}
::= { ptpbaseClockParentDSTable 1 }
PtpbaseClockParentDSEntry ::= SEQUENCE {
ptpbaseClockParentDSDomainIndex PtpClockDomainType,
ptpbaseClockParentDSClockTypeIndex PtpClockType,
ptpbaseClockParentDSInstanceIndex PtpClockInstanceType,
ptpbaseClockParentDSParentPortIdentity OCTET STRING,
ptpbaseClockParentDSParentStats TruthValue,
ptpbaseClockParentDSOffset PtpClockIntervalBase2,
ptpbaseClockParentDSClockPhChRate Integer32,
ptpbaseClockParentDSGMClockIdentity PtpClockIdentity,
ptpbaseClockParentDSGMClockPriority1 Unsigned32,
ptpbaseClockParentDSGMClockPriority2 Unsigned32,
ptpbaseClockParentDSGMClockQualityClass PtpClockQualityClassType,
ptpbaseClockParentDSGMClockQualityAccuracy
PtpClockQualityAccuracyType,
ptpbaseClockParentDSGMClockQualityOffset Unsigned32
}
Shankarkumar, et al. Standards Track [Page 20]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockParentDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockParentDSEntry 1 }
ptpbaseClockParentDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockParentDSEntry 2 }
ptpbaseClockParentDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockParentDSEntry 3 }
ptpbaseClockParentDSParentPortIdentity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of portIdentity of the port on
the master that issues the Sync messages used in synchronizing
this clock."
REFERENCE
"Section 8.2.3.2 ('parentDS.parentPortIdentity') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 4 }
Shankarkumar, et al. Standards Track [Page 21]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockParentDSParentStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS ParentStats value.
This value indicates whether the values of ParentDSOffset
and ParentDSClockPhChRate have been measured and are valid.
A TRUE value shall indicate valid data."
REFERENCE
"Section 8.2.3.3 ('parentDS.parentStats') of [IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 5 }
ptpbaseClockParentDSOffset OBJECT-TYPE
SYNTAX PtpClockIntervalBase2 (-128..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS
ParentOffsetScaledLogVariance value.
This value is the variance of the parent clock's phase as
measured by the local clock."
REFERENCE
"Section 8.2.3.4
('parentDS.observedParentOffsetScaledLogVariance') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 6 }
ptpbaseClockParentDSClockPhChRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock's parentDS
ParentClockPhaseChangeRate value.
This value is an estimate of the parent clock's phase change
rate as measured by the slave clock."
REFERENCE
"Section 8.2.3.5
('parentDS.observedParentClockPhaseChangeRate') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 7 }
Shankarkumar, et al. Standards Track [Page 22]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockParentDSGMClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
identity."
REFERENCE
"Section 8.2.3.6 ('parentDS.grandmasterIdentity') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 8 }
ptpbaseClockParentDSGMClockPriority1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
priority1."
REFERENCE
"Section 8.2.3.8 ('parentDS.grandmasterPriority1') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 9 }
ptpbaseClockParentDSGMClockPriority2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
priority2."
REFERENCE
"Section 8.2.3.9 ('parentDS.grandmasterPriority2') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 10 }
ptpbaseClockParentDSGMClockQualityClass OBJECT-TYPE
SYNTAX PtpClockQualityClassType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
quality class."
REFERENCE
"Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 11 }
Shankarkumar, et al. Standards Track [Page 23]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockParentDSGMClockQualityAccuracy OBJECT-TYPE
SYNTAX PtpClockQualityAccuracyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
quality accuracy."
REFERENCE
"Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 12 }
ptpbaseClockParentDSGMClockQualityOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parentDS grandmaster clock
quality offset."
REFERENCE
"Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of
[IEEE-1588-2008]"
::= { ptpbaseClockParentDSEntry 13 }
ptpbaseClockDefaultDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock defaultDS for
all domains."
::= { ptpbaseMIBClockInfo 3 }
ptpbaseClockDefaultDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP clock defaultDS for a domain."
INDEX {
ptpbaseClockDefaultDSDomainIndex,
ptpbaseClockDefaultDSClockTypeIndex,
ptpbaseClockDefaultDSInstanceIndex
}
::= { ptpbaseClockDefaultDSTable 1 }
PtpbaseClockDefaultDSEntry ::= SEQUENCE {
Shankarkumar, et al. Standards Track [Page 24]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockDefaultDSDomainIndex PtpClockDomainType,
ptpbaseClockDefaultDSClockTypeIndex PtpClockType,
ptpbaseClockDefaultDSInstanceIndex PtpClockInstanceType,
ptpbaseClockDefaultDSTwoStepFlag TruthValue,
ptpbaseClockDefaultDSClockIdentity PtpClockIdentity,
ptpbaseClockDefaultDSPriority1 Unsigned32,
ptpbaseClockDefaultDSPriority2 Unsigned32,
ptpbaseClockDefaultDSSlaveOnly TruthValue,
ptpbaseClockDefaultDSQualityClass PtpClockQualityClassType,
ptpbaseClockDefaultDSQualityAccuracy
PtpClockQualityAccuracyType,
ptpbaseClockDefaultDSQualityOffset Integer32
}
ptpbaseClockDefaultDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockDefaultDSEntry 1 }
ptpbaseClockDefaultDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockDefaultDSEntry 2 }
ptpbaseClockDefaultDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockDefaultDSEntry 3 }
ptpbaseClockDefaultDSTwoStepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the two-step process is used."
::= { ptpbaseClockDefaultDSEntry 4 }
Shankarkumar, et al. Standards Track [Page 25]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockDefaultDSClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS clockIdentity member."
::= { ptpbaseClockDefaultDSEntry 5 }
ptpbaseClockDefaultDSPriority1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS priority1 member."
::= { ptpbaseClockDefaultDSEntry 6 }
ptpbaseClockDefaultDSPriority2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS priority2 member."
::= { ptpbaseClockDefaultDSEntry 7 }
ptpbaseClockDefaultDSSlaveOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the SlaveOnly flag is set."
::= { ptpbaseClockDefaultDSEntry 8 }
ptpbaseClockDefaultDSQualityClass OBJECT-TYPE
SYNTAX PtpClockQualityClassType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS Quality Class."
::= { ptpbaseClockDefaultDSEntry 9 }
ptpbaseClockDefaultDSQualityAccuracy OBJECT-TYPE
SYNTAX PtpClockQualityAccuracyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS Quality Accuracy."
::= { ptpbaseClockDefaultDSEntry 10 }
Shankarkumar, et al. Standards Track [Page 26]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockDefaultDSQualityOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the defaultDS Quality offset."
::= { ptpbaseClockDefaultDSEntry 11 }
ptpbaseClockRunningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock running datasets for
all domains."
::= { ptpbaseMIBClockInfo 4 }
ptpbaseClockRunningEntry OBJECT-TYPE
SYNTAX PtpbaseClockRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP clock running dataset for a domain."
INDEX {
ptpbaseClockRunningDomainIndex,
ptpbaseClockRunningClockTypeIndex,
ptpbaseClockRunningInstanceIndex
}
::= { ptpbaseClockRunningTable 1 }
PtpbaseClockRunningEntry ::= SEQUENCE {
ptpbaseClockRunningDomainIndex PtpClockDomainType,
ptpbaseClockRunningClockTypeIndex PtpClockType,
ptpbaseClockRunningInstanceIndex PtpClockInstanceType,
ptpbaseClockRunningState PtpClockStateType,
ptpbaseClockRunningPacketsSent Counter64,
ptpbaseClockRunningPacketsReceived Counter64
}
Shankarkumar, et al. Standards Track [Page 27]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockRunningDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockRunningEntry 1 }
ptpbaseClockRunningClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockRunningEntry 2 }
ptpbaseClockRunningInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockRunningEntry 3 }
ptpbaseClockRunningState OBJECT-TYPE
SYNTAX PtpClockStateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock state returned by a PTP
engine."
::= { ptpbaseClockRunningEntry 4 }
ptpbaseClockRunningPacketsSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of all unicast and
multicast packets that have been sent out for this clock in this
domain for this type. These counters are discontinuous."
::= { ptpbaseClockRunningEntry 5 }
Shankarkumar, et al. Standards Track [Page 28]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockRunningPacketsReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of all unicast and
multicast packets that have been received for this clock in this
domain for this type. These counters are discontinuous."
::= { ptpbaseClockRunningEntry 6 }
ptpbaseClockTimePropertiesDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockTimePropertiesDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock timePropertiesDS
for all domains."
::= { ptpbaseMIBClockInfo 5 }
ptpbaseClockTimePropertiesDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockTimePropertiesDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP clock timePropertiesDS for a domain."
REFERENCE
"Section 8.2.4 ('timePropertiesDS data set member
specifications') of [IEEE-1588-2008]"
INDEX {
ptpbaseClockTimePropertiesDSDomainIndex,
ptpbaseClockTimePropertiesDSClockTypeIndex,
ptpbaseClockTimePropertiesDSInstanceIndex
}
::= { ptpbaseClockTimePropertiesDSTable 1 }
PtpbaseClockTimePropertiesDSEntry ::= SEQUENCE {
ptpbaseClockTimePropertiesDSDomainIndex PtpClockDomainType,
ptpbaseClockTimePropertiesDSClockTypeIndex PtpClockType,
ptpbaseClockTimePropertiesDSInstanceIndex
PtpClockInstanceType,
ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid TruthValue,
ptpbaseClockTimePropertiesDSCurrentUTCOffset Integer32,
ptpbaseClockTimePropertiesDSLeap59 TruthValue,
ptpbaseClockTimePropertiesDSLeap61 TruthValue,
ptpbaseClockTimePropertiesDSTimeTraceable TruthValue,
ptpbaseClockTimePropertiesDSFreqTraceable TruthValue,
ptpbaseClockTimePropertiesDSPTPTimescale TruthValue,
Shankarkumar, et al. Standards Track [Page 29]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockTimePropertiesDSSource
PtpClockTimeSourceType
}
ptpbaseClockTimePropertiesDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockTimePropertiesDSEntry 1 }
ptpbaseClockTimePropertiesDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockTimePropertiesDSEntry 2 }
ptpbaseClockTimePropertiesDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockTimePropertiesDSEntry 3 }
ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the timePropertiesDS value of
whether the current UTC offset is valid."
REFERENCE
"Section 8.2.4.2 ('timePropertiesDS.currentUtcOffset') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 4 }
ptpbaseClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
Shankarkumar, et al. Standards Track [Page 30]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies the timePropertiesDS value of
the current UTC offset.
In PTP systems whose epoch is the PTP epoch, the value of
timePropertiesDS.currentUtcOffset is the offset
between TAI and UTC; otherwise, the value has no meaning. The
value shall be in units of seconds."
REFERENCE
"Section 8.2.4.3 ('timePropertiesDS.currentUtcOffsetValid') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 5 }
ptpbaseClockTimePropertiesDSLeap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Leap59 value in the clock
currentDS."
REFERENCE
"Section 8.2.4.4 ('timePropertiesDS.leap59')
of [IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 6 }
ptpbaseClockTimePropertiesDSLeap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Leap61 value in the clock
currentDS."
REFERENCE
"Section 8.2.4.5 ('timePropertiesDS.leap61')
of [IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 7 }
ptpbaseClockTimePropertiesDSTimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Time Traceable value in the clock
currentDS."
REFERENCE
"Section 8.2.4.6 ('timePropertiesDS.timeTraceable') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 8 }
Shankarkumar, et al. Standards Track [Page 31]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockTimePropertiesDSFreqTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Frequency Traceable value in the
clock currentDS."
REFERENCE
"Section 8.2.4.7 ('timePropertiesDS.frequencyTraceable') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 9 }
ptpbaseClockTimePropertiesDSPTPTimescale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP Timescale value in the clock
currentDS."
REFERENCE
"Section 8.2.4.8 ('timePropertiesDS.ptpTimescale') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 10 }
ptpbaseClockTimePropertiesDSSource OBJECT-TYPE
SYNTAX PtpClockTimeSourceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Timesource value in the clock
currentDS."
REFERENCE
"Section 8.2.4.9 ('timePropertiesDS.timeSource') of
[IEEE-1588-2008]"
::= { ptpbaseClockTimePropertiesDSEntry 11 }
ptpbaseClockTransDefaultDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockTransDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP transparentClockDefaultDS
for all domains."
::= { ptpbaseMIBClockInfo 6 }
Shankarkumar, et al. Standards Track [Page 32]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockTransDefaultDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockTransDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
PTP transparent clock defaultDS for a domain."
REFERENCE
"Section 8.3.2 ('transparentClockDefaultDS data set member
specifications') of [IEEE-1588-2008]"
INDEX {
ptpbaseClockTransDefaultDSDomainIndex,
ptpbaseClockTransDefaultDSInstanceIndex
}
::= { ptpbaseClockTransDefaultDSTable 1 }
PtpbaseClockTransDefaultDSEntry ::= SEQUENCE {
ptpbaseClockTransDefaultDSDomainIndex PtpClockDomainType,
ptpbaseClockTransDefaultDSInstanceIndex PtpClockInstanceType,
ptpbaseClockTransDefaultDSClockIdentity PtpClockIdentity,
ptpbaseClockTransDefaultDSNumOfPorts Counter32,
ptpbaseClockTransDefaultDSDelay PtpClockMechanismType,
ptpbaseClockTransDefaultDSPrimaryDomain PtpClockDomainType
}
ptpbaseClockTransDefaultDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockTransDefaultDSEntry 1 }
ptpbaseClockTransDefaultDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockTransDefaultDSEntry 2 }
ptpbaseClockTransDefaultDSClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
Shankarkumar, et al. Standards Track [Page 33]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies the value of the clockIdentity attribute
of the local clock."
REFERENCE
"Section 8.3.2.2.1 ('transparentClockDefaultDS.clockIdentity')
of [IEEE-1588-2008]"
::= { ptpbaseClockTransDefaultDSEntry 3 }
ptpbaseClockTransDefaultDSNumOfPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of PTP ports of the device.
These counters are discontinuous."
REFERENCE
"Section 8.3.2.2.2 ('transparentClockDefaultDS.numberPorts')
of [IEEE-1588-2008]"
::= { ptpbaseClockTransDefaultDSEntry 4 }
ptpbaseClockTransDefaultDSDelay OBJECT-TYPE
SYNTAX PtpClockMechanismType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, if the transparent clock is an end-to-end
transparent clock, has the value of e2e; if the
transparent clock is a peer-to-peer transparent clock, the
value is p2p."
REFERENCE
"Section 8.3.2.3.1 ('transparentClockDefaultDS.delayMechanism')
of [IEEE-1588-2008]"
::= { ptpbaseClockTransDefaultDSEntry 5 }
ptpbaseClockTransDefaultDSPrimaryDomain OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the primary syntonization
domain. The initialization value is 0."
REFERENCE
"Section 8.3.2.3.2 ('transparentClockDefaultDS.primaryDomain')
of [IEEE-1588-2008]"
::= { ptpbaseClockTransDefaultDSEntry 6 }
Shankarkumar, et al. Standards Track [Page 34]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock ports for a particular
domain."
::= { ptpbaseMIBClockInfo 7 }
ptpbaseClockPortEntry OBJECT-TYPE
SYNTAX PtpbaseClockPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
clock port."
INDEX {
ptpbaseClockPortDomainIndex,
ptpbaseClockPortClockTypeIndex,
ptpbaseClockPortClockInstanceIndex,
ptpbaseClockPortTablePortNumberIndex
}
::= { ptpbaseClockPortTable 1 }
PtpbaseClockPortEntry ::= SEQUENCE {
ptpbaseClockPortDomainIndex PtpClockDomainType,
ptpbaseClockPortClockTypeIndex PtpClockType,
ptpbaseClockPortClockInstanceIndex PtpClockInstanceType,
ptpbaseClockPortTablePortNumberIndex PtpClockPortNumber,
ptpbaseClockPortName DisplayString,
ptpbaseClockPortRole PtpClockRoleType,
ptpbaseClockPortSyncTwoStep TruthValue,
ptpbaseClockPortCurrentPeerAddressType AutonomousType,
ptpbaseClockPortCurrentPeerAddress
PtpClockPortTransportTypeAddress,
ptpbaseClockPortNumOfAssociatedPorts Gauge32
}
ptpbaseClockPortDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockPortEntry 1 }
Shankarkumar, et al. Standards Track [Page 35]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockPortEntry 2 }
ptpbaseClockPortClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockPortEntry 3 }
ptpbaseClockPortTablePortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portNumber for this port."
::= { ptpbaseClockPortEntry 4 }
ptpbaseClockPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port name configured on the
node."
::= { ptpbaseClockPortEntry 5 }
ptpbaseClockPortRole OBJECT-TYPE
SYNTAX PtpClockRoleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the current role (slave/master) of the
port."
::= { ptpbaseClockPortEntry 6 }
ptpbaseClockPortSyncTwoStep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
Shankarkumar, et al. Standards Track [Page 36]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies that two-step clock operation between
the PTP master and slave device is enabled."
::= { ptpbaseClockPortEntry 7 }
ptpbaseClockPortCurrentPeerAddressType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current peer's network address type
used for PTP communication."
::= { ptpbaseClockPortEntry 8 }
ptpbaseClockPortCurrentPeerAddress OBJECT-TYPE
SYNTAX PtpClockPortTransportTypeAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current peer's network address used
for PTP communication."
::= { ptpbaseClockPortEntry 9 }
ptpbaseClockPortNumOfAssociatedPorts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the following:
For a master port - the number of PTP slave sessions (peers)
associated with this PTP port.
For a slave port - the number of masters available to this slave
port (might or might not be peered)."
::= { ptpbaseClockPortEntry 10 }
ptpbaseClockPortDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockPortDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock's portDS for a
particular domain."
::= { ptpbaseMIBClockInfo 8 }
Shankarkumar, et al. Standards Track [Page 37]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockPortDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains portDS information for
a single clock port."
INDEX {
ptpbaseClockPortDSDomainIndex,
ptpbaseClockPortDSClockTypeIndex,
ptpbaseClockPortDSClockInstanceIndex,
ptpbaseClockPortDSPortNumberIndex
}
::= { ptpbaseClockPortDSTable 1 }
PtpbaseClockPortDSEntry ::= SEQUENCE {
ptpbaseClockPortDSDomainIndex PtpClockDomainType,
ptpbaseClockPortDSClockTypeIndex PtpClockType,
ptpbaseClockPortDSClockInstanceIndex PtpClockInstanceType,
ptpbaseClockPortDSPortNumberIndex PtpClockPortNumber,
ptpbaseClockPortDSName DisplayString,
ptpbaseClockPortDSPortIdentity OCTET STRING,
ptpbaseClockPortDSlogAnnouncementInterval PtpClockIntervalBase2,
ptpbaseClockPortDSAnnounceRctTimeout Integer32,
ptpbaseClockPortDSlogSyncInterval PtpClockIntervalBase2,
ptpbaseClockPortDSMinDelayReqInterval Integer32,
ptpbaseClockPortDSPeerDelayReqInterval Integer32,
ptpbaseClockPortDSDelayMech PtpClockMechanismType,
ptpbaseClockPortDSPeerMeanPathDelay PtpClockTimeInterval,
ptpbaseClockPortDSGrantDuration Unsigned32,
ptpbaseClockPortDSPTPVersion Unsigned32
}
ptpbaseClockPortDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockPortDSEntry 1 }
ptpbaseClockPortDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
Shankarkumar, et al. Standards Track [Page 38]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockPortDSEntry 2 }
ptpbaseClockPortDSClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockPortDSEntry 3 }
ptpbaseClockPortDSPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portNumber associated with this
PTP port."
::= { ptpbaseClockPortDSEntry 4 }
ptpbaseClockPortDSName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock portDS name."
::= { ptpbaseClockPortDSEntry 5 }
ptpbaseClockPortDSPortIdentity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port Identity."
::= { ptpbaseClockPortDSEntry 6 }
ptpbaseClockPortDSlogAnnouncementInterval OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Announce message transmission
interval associated with this clock port."
::= { ptpbaseClockPortDSEntry 7 }
Shankarkumar, et al. Standards Track [Page 39]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortDSAnnounceRctTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Announce receipt timeout associated
with this clock port."
::= { ptpbaseClockPortDSEntry 8 }
ptpbaseClockPortDSlogSyncInterval OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Sync message transmission interval."
::= { ptpbaseClockPortDSEntry 9 }
ptpbaseClockPortDSMinDelayReqInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Delay_Req message transmission
interval."
::= { ptpbaseClockPortDSEntry 10 }
ptpbaseClockPortDSPeerDelayReqInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Pdelay_Req message transmission
interval."
::= { ptpbaseClockPortDSEntry 11 }
ptpbaseClockPortDSDelayMech OBJECT-TYPE
SYNTAX PtpClockMechanismType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the delay mechanism used. If the clock
is an end-to-end clock, the value is e2e; if the
clock is a peer to-peer clock, the value is p2p."
::= { ptpbaseClockPortDSEntry 12 }
Shankarkumar, et al. Standards Track [Page 40]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortDSPeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer meanPathDelay."
::= { ptpbaseClockPortDSEntry 13 }
ptpbaseClockPortDSGrantDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the grant duration allocated by the
master."
::= { ptpbaseClockPortDSEntry 14 }
ptpbaseClockPortDSPTPVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP version being used."
::= { ptpbaseClockPortDSEntry 15 }
ptpbaseClockPortRunningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockPortRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock ports running datasets for
a particular domain."
::= { ptpbaseMIBClockInfo 9 }
ptpbaseClockPortRunningEntry OBJECT-TYPE
SYNTAX PtpbaseClockPortRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains running dataset information
about a single clock port."
Shankarkumar, et al. Standards Track [Page 41]
RFC 8173 PTPv2 MIB June 2017
INDEX {
ptpbaseClockPortRunningDomainIndex,
ptpbaseClockPortRunningClockTypeIndex,
ptpbaseClockPortRunningClockInstanceIndex,
ptpbaseClockPortRunningPortNumberIndex
}
::= { ptpbaseClockPortRunningTable 1 }
PtpbaseClockPortRunningEntry ::= SEQUENCE {
ptpbaseClockPortRunningDomainIndex PtpClockDomainType,
ptpbaseClockPortRunningClockTypeIndex PtpClockType,
ptpbaseClockPortRunningClockInstanceIndex PtpClockInstanceType,
ptpbaseClockPortRunningPortNumberIndex PtpClockPortNumber,
ptpbaseClockPortRunningName DisplayString,
ptpbaseClockPortRunningState PtpClockPortState,
ptpbaseClockPortRunningRole PtpClockRoleType,
ptpbaseClockPortRunningInterfaceIndex InterfaceIndexOrZero,
ptpbaseClockPortRunningTransport AutonomousType,
ptpbaseClockPortRunningEncapsulationType AutonomousType,
ptpbaseClockPortRunningTxMode PtpClockTxModeType,
ptpbaseClockPortRunningRxMode PtpClockTxModeType,
ptpbaseClockPortRunningPacketsReceived Counter64,
ptpbaseClockPortRunningPacketsSent Counter64
}
ptpbaseClockPortRunningDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockPortRunningEntry 1 }
ptpbaseClockPortRunningClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
textual convention description."
::= { ptpbaseClockPortRunningEntry 2 }
ptpbaseClockPortRunningClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
Shankarkumar, et al. Standards Track [Page 42]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockPortRunningEntry 3 }
ptpbaseClockPortRunningPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portNumber associated with this
clock port."
::= { ptpbaseClockPortRunningEntry 4 }
ptpbaseClockPortRunningName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port name."
::= { ptpbaseClockPortRunningEntry 5 }
ptpbaseClockPortRunningState OBJECT-TYPE
SYNTAX PtpClockPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the port state returned by PTP engine:
initializing
faulty
disabled
listening
preMaster
master
passive
uncalibrated
slave "
::= { ptpbaseClockPortRunningEntry 6 }
ptpbaseClockPortRunningRole OBJECT-TYPE
SYNTAX PtpClockRoleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Clock Role."
::= { ptpbaseClockPortRunningEntry 7 }
Shankarkumar, et al. Standards Track [Page 43]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortRunningInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the interface on the node being used by
the PTP clock for PTP communication."
::= { ptpbaseClockPortRunningEntry 8 }
ptpbaseClockPortRunningTransport OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the transport protocol being used for PTP
communication (the mapping used)."
::= { ptpbaseClockPortRunningEntry 9 }
ptpbaseClockPortRunningEncapsulationType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of encapsulation if the
interface is adding extra layers (e.g., VLAN or Pseudowire
encapsulation) for the PTP messages."
::= { ptpbaseClockPortRunningEntry 10 }
ptpbaseClockPortRunningTxMode OBJECT-TYPE
SYNTAX PtpClockTxModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock transmission mode as:
unicast: Using unicast communication channel
multicast: Using multicast communication channel
multicast-mix: Using multicast-unicast communication channel"
::= { ptpbaseClockPortRunningEntry 11 }
ptpbaseClockPortRunningRxMode OBJECT-TYPE
SYNTAX PtpClockTxModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock receive mode as:
unicast: Using unicast communication channel
multicast: Using multicast communication channel
multicast-mix: Using multicast-unicast communication channel"
Shankarkumar, et al. Standards Track [Page 44]
RFC 8173 PTPv2 MIB June 2017
::= { ptpbaseClockPortRunningEntry 12 }
ptpbaseClockPortRunningPacketsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the packets received on the clock port
(cumulative). These counters are discontinuous."
::= { ptpbaseClockPortRunningEntry 13 }
ptpbaseClockPortRunningPacketsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the packets sent on the clock port
(cumulative). These counters are discontinuous."
::= { ptpbaseClockPortRunningEntry 14 }
ptpbaseClockPortTransDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockPortTransDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the transparentClockPortDS
for a particular domain."
::= { ptpbaseMIBClockInfo 10 }
ptpbaseClockPortTransDSEntry OBJECT-TYPE
SYNTAX PtpbaseClockPortTransDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains clock port transparent
dataset information about a single clock port."
INDEX {
ptpbaseClockPortTransDSDomainIndex,
ptpbaseClockPortTransDSInstanceIndex,
ptpbaseClockPortTransDSPortNumberIndex
}
::= { ptpbaseClockPortTransDSTable 1 }
Shankarkumar, et al. Standards Track [Page 45]
RFC 8173 PTPv2 MIB June 2017
PtpbaseClockPortTransDSEntry ::= SEQUENCE {
ptpbaseClockPortTransDSDomainIndex PtpClockDomainType,
ptpbaseClockPortTransDSInstanceIndex PtpClockInstanceType,
ptpbaseClockPortTransDSPortNumberIndex PtpClockPortNumber,
ptpbaseClockPortTransDSPortIdentity PtpClockIdentity,
ptpbaseClockPortTransDSlogMinPdelayReqInt PtpClockIntervalBase2,
ptpbaseClockPortTransDSFaultyFlag TruthValue,
ptpbaseClockPortTransDSPeerMeanPathDelay PtpClockTimeInterval
}
ptpbaseClockPortTransDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpbaseClockPortTransDSEntry 1 }
ptpbaseClockPortTransDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockPortTransDSEntry 2 }
ptpbaseClockPortTransDSPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portNumber associated with this
port."
REFERENCE "Section 7.5.2 ('Port Identity')
of [IEEE-1588-2008]"
::= { ptpbaseClockPortTransDSEntry 3 }
ptpbaseClockPortTransDSPortIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
Shankarkumar, et al. Standards Track [Page 46]
RFC 8173 PTPv2 MIB June 2017
DESCRIPTION
"This object specifies the value of the PortIdentity
attribute of the local port."
REFERENCE
"Section 8.3.3.2.1 ('transparentClockPortDS.portIdentity') of
[IEEE-1588-2008]"
::= { ptpbaseClockPortTransDSEntry 4 }
ptpbaseClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the logarithm to the
base 2 of the minPdelayReqInterval."
REFERENCE
"Section 8.3.3.3.1
('transparentClockPortDS.logMinPdelayReqInterval') of
[IEEE-1588-2008]"
::= { ptpbaseClockPortTransDSEntry 5 }
ptpbaseClockPortTransDSFaultyFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value TRUE if the port is faulty
and FALSE if the port is operating normally."
REFERENCE
"Section 8.3.3.3.2 ('transparentClockPortDS.faultyFlag') of
[IEEE-1588-2008]"
::= { ptpbaseClockPortTransDSEntry 6 }
ptpbaseClockPortTransDSPeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies, if the delayMechanism used is p2p, the
value of the estimate of the current one-way propagation delay,
i.e., <meanPathDelay> on the link attached to this port,
computed using the peer delay mechanism. If the value of the
delayMechanism used is e2e, then the value will be zero."
REFERENCE
"Section 8.3.3.3.3 ('transparentClockPortDS.peerMeanPathDelay')
of [IEEE-1588-2008]"
::= { ptpbaseClockPortTransDSEntry 7 }
Shankarkumar, et al. Standards Track [Page 47]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortAssociateTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpbaseClockPortAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about a given port's associated ports.
For a master port: multiple slave ports that have established
sessions with the current master port.
For a slave port: the list of masters available for a given
slave port.
Session information (packets, errors) to be displayed based on
availability and scenario."
::= { ptpbaseMIBClockInfo 11 }
--
-- Well Known transport types for PTP communication.
--
ptpbaseWellKnownTransportTypes OBJECT IDENTIFIER ::= {
ptpbaseMIBClockInfo 12 }
ptpbaseTransportTypeIPversion4 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IP version 4"
::= { ptpbaseWellKnownTransportTypes 1 }
ptpbaseTransportTypeIPversion6 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IP version 6"
::= { ptpbaseWellKnownTransportTypes 2 }
ptpbaseTransportTypeEthernet OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet"
::= { ptpbaseWellKnownTransportTypes 3 }
ptpbaseTransportTypeDeviceNET OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Device NET"
::= { ptpbaseWellKnownTransportTypes 4 }
Shankarkumar, et al. Standards Track [Page 48]
RFC 8173 PTPv2 MIB June 2017
ptpbaseTransportTypeControlNET OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Control NET"
::= { ptpbaseWellKnownTransportTypes 5 }
ptpbaseTransportTypeIEC61158 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IEC61158"
::= { ptpbaseWellKnownTransportTypes 6 }
--
-- Well Known encapsulation types for PTP communication.
--
ptpbaseWellKnownEncapsulationTypes OBJECT IDENTIFIER ::= {
ptpbaseMIBClockInfo 13 }
ptpbaseEncapsulationTypeEthernet OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet Encapsulation type."
::= { ptpbaseWellKnownEncapsulationTypes 1 }
ptpbaseEncapsulationTypeVLAN OBJECT-IDENTITY
STATUS current
DESCRIPTION
"VLAN Encapsulation type."
::= { ptpbaseWellKnownEncapsulationTypes 2 }
ptpbaseEncapsulationTypeUDPIPLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"UDP/IP over MPLS Encapsulation type."
::= { ptpbaseWellKnownEncapsulationTypes 3 }
ptpbaseEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"UDP/IP Pseudowire over MPLS Encapsulation type."
::= { ptpbaseWellKnownEncapsulationTypes 4 }
Shankarkumar, et al. Standards Track [Page 49]
RFC 8173 PTPv2 MIB June 2017
ptpbaseEncapsulationTypePWEthernetLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet Pseudowire over MPLS Encapsulation type."
::= { ptpbaseWellKnownEncapsulationTypes 5 }
ptpbaseClockPortAssociateEntry OBJECT-TYPE
SYNTAX PtpbaseClockPortAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry that contains information about a single
associated port for the given clock port."
INDEX {
ptpClockPortCurrentDomainIndex,
ptpClockPortCurrentClockTypeIndex,
ptpClockPortCurrentClockInstanceIndex,
ptpClockPortCurrentPortNumberIndex,
ptpbaseClockPortAssociatePortIndex
}
::= { ptpbaseClockPortAssociateTable 1 }
PtpbaseClockPortAssociateEntry ::= SEQUENCE {
ptpClockPortCurrentDomainIndex PtpClockDomainType,
ptpClockPortCurrentClockTypeIndex PtpClockType,
ptpClockPortCurrentClockInstanceIndex PtpClockInstanceType,
ptpClockPortCurrentPortNumberIndex PtpClockPortNumber,
ptpbaseClockPortAssociatePortIndex Unsigned32,
ptpbaseClockPortAssociateAddressType AutonomousType,
ptpbaseClockPortAssociateAddress
PtpClockPortTransportTypeAddress,
ptpbaseClockPortAssociatePacketsSent Counter64,
ptpbaseClockPortAssociatePacketsReceived Counter64,
ptpbaseClockPortAssociateInErrors Counter64,
ptpbaseClockPortAssociateOutErrors Counter64
}
ptpClockPortCurrentDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the given port's domain number."
::= { ptpbaseClockPortAssociateEntry 1 }
Shankarkumar, et al. Standards Track [Page 50]
RFC 8173 PTPv2 MIB June 2017
ptpClockPortCurrentClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the given port's clock type."
::= { ptpbaseClockPortAssociateEntry 2 }
ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpbaseClockPortAssociateEntry 3 }
ptpClockPortCurrentPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portNumber for the given port."
::= { ptpbaseClockPortAssociateEntry 4 }
ptpbaseClockPortAssociatePortIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the associated port's serial number in
the current port's context."
::= { ptpbaseClockPortAssociateEntry 5 }
ptpbaseClockPortAssociateAddressType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer port's network address type used
for PTP communication. The OCTET STRING representation of the
OID of ptpbaseWellKnownTransportTypes will be used in the values
contained in the OCTET STRING."
::= { ptpbaseClockPortAssociateEntry 6 }
Shankarkumar, et al. Standards Track [Page 51]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortAssociateAddress OBJECT-TYPE
SYNTAX PtpClockPortTransportTypeAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer port's network address used for
PTP communication."
::= { ptpbaseClockPortAssociateEntry 7 }
ptpbaseClockPortAssociatePacketsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent to this peer port from the current
port. These counters are discontinuous."
::= { ptpbaseClockPortAssociateEntry 8 }
ptpbaseClockPortAssociatePacketsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from this peer port by the
current port. These counters are discontinuous."
::= { ptpbaseClockPortAssociateEntry 9 }
ptpbaseClockPortAssociateInErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the input errors associated with the
peer port. These counters are discontinuous."
::= { ptpbaseClockPortAssociateEntry 10 }
ptpbaseClockPortAssociateOutErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the output errors associated with the
peer port. These counters are discontinuous."
::= { ptpbaseClockPortAssociateEntry 11 }
Shankarkumar, et al. Standards Track [Page 52]
RFC 8173 PTPv2 MIB June 2017
-- Conformance Information Definition
ptpbaseMIBCompliances OBJECT IDENTIFIER
::= { ptpbaseMIBConformance 1 }
ptpbaseMIBGroups OBJECT IDENTIFIER
::= { ptpbaseMIBConformance 2 }
ptpbaseMIBCompliancesSystemInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide system-level information of clock
devices. Such devices can only be monitored using this MIB
module.
The module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS { ptpbaseMIBSystemInfoGroup }
::= { ptpbaseMIBCompliances 1 }
ptpbaseMIBCompliancesClockInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide clock-related information.
Such devices can only be monitored using this MIB module.
The module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpbaseMIBClockCurrentDSGroup,
ptpbaseMIBClockParentDSGroup,
ptpbaseMIBClockDefaultDSGroup,
ptpbaseMIBClockRunningGroup,
ptpbaseMIBClockTimepropertiesGroup
}
::= { ptpbaseMIBCompliances 2 }
Shankarkumar, et al. Standards Track [Page 53]
RFC 8173 PTPv2 MIB June 2017
ptpbaseMIBCompliancesClockPortInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide clock-port-related information.
Such devices can only be monitored using this MIB module.
The module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpbaseMIBClockPortGroup,
ptpbaseMIBClockPortDSGroup,
ptpbaseMIBClockPortRunningGroup,
ptpbaseMIBClockPortAssociateGroup
}
::= { ptpbaseMIBCompliances 3 }
ptpbaseMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide transparent-clock-related
information. Such devices can only be monitored using this MIB
module.
The module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpbaseMIBClockTranparentDSGroup,
ptpbaseMIBClockPortTransDSGroup
}
::= { ptpbaseMIBCompliances 4 }
ptpbaseMIBSystemInfoGroup OBJECT-GROUP
OBJECTS {
ptpbaseSystemDomainTotals,
ptpDomainClockPortsTotal,
ptpbaseSystemProfile
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing system-wide
information"
::= { ptpbaseMIBGroups 1 }
Shankarkumar, et al. Standards Track [Page 54]
RFC 8173 PTPv2 MIB June 2017
ptpbaseMIBClockCurrentDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockCurrentDSStepsRemoved,
ptpbaseClockCurrentDSOffsetFromMaster,
ptpbaseClockCurrentDSMeanPathDelay
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP currentDS
information"
::= { ptpbaseMIBGroups 2 }
ptpbaseMIBClockParentDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockParentDSParentPortIdentity,
ptpbaseClockParentDSParentStats,
ptpbaseClockParentDSOffset,
ptpbaseClockParentDSClockPhChRate,
ptpbaseClockParentDSGMClockIdentity,
ptpbaseClockParentDSGMClockPriority1,
ptpbaseClockParentDSGMClockPriority2,
ptpbaseClockParentDSGMClockQualityClass,
ptpbaseClockParentDSGMClockQualityAccuracy,
ptpbaseClockParentDSGMClockQualityOffset
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP parentDS
information"
::= { ptpbaseMIBGroups 3 }
ptpbaseMIBClockDefaultDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockDefaultDSTwoStepFlag,
ptpbaseClockDefaultDSClockIdentity,
ptpbaseClockDefaultDSPriority1,
ptpbaseClockDefaultDSPriority2,
ptpbaseClockDefaultDSSlaveOnly,
ptpbaseClockDefaultDSQualityClass,
ptpbaseClockDefaultDSQualityAccuracy,
ptpbaseClockDefaultDSQualityOffset
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP defaultDS
information"
::= { ptpbaseMIBGroups 4 }
Shankarkumar, et al. Standards Track [Page 55]
RFC 8173 PTPv2 MIB June 2017
ptpbaseMIBClockRunningGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockRunningState,
ptpbaseClockRunningPacketsSent,
ptpbaseClockRunningPacketsReceived
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP running state
information"
::= { ptpbaseMIBGroups 5 }
ptpbaseMIBClockTimepropertiesGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid,
ptpbaseClockTimePropertiesDSCurrentUTCOffset,
ptpbaseClockTimePropertiesDSLeap59,
ptpbaseClockTimePropertiesDSLeap61,
ptpbaseClockTimePropertiesDSTimeTraceable,
ptpbaseClockTimePropertiesDSFreqTraceable,
ptpbaseClockTimePropertiesDSPTPTimescale,
ptpbaseClockTimePropertiesDSSource
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP Time Properties
information"
::= { ptpbaseMIBGroups 6 }
ptpbaseMIBClockTranparentDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockTransDefaultDSClockIdentity,
ptpbaseClockTransDefaultDSNumOfPorts,
ptpbaseClockTransDefaultDSDelay,
ptpbaseClockTransDefaultDSPrimaryDomain
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP
transparentClockDefaultDS information"
::= { ptpbaseMIBGroups 7 }
ptpbaseMIBClockPortGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockPortName,
ptpbaseClockPortSyncTwoStep,
ptpbaseClockPortCurrentPeerAddress,
ptpbaseClockPortNumOfAssociatedPorts,
Shankarkumar, et al. Standards Track [Page 56]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortCurrentPeerAddressType,
ptpbaseClockPortRole
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing information for a
given PTP Port"
::= { ptpbaseMIBGroups 8 }
ptpbaseMIBClockPortDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockPortDSName,
ptpbaseClockPortDSPortIdentity,
ptpbaseClockPortDSlogAnnouncementInterval,
ptpbaseClockPortDSAnnounceRctTimeout,
ptpbaseClockPortDSlogSyncInterval,
ptpbaseClockPortDSMinDelayReqInterval,
ptpbaseClockPortDSPeerDelayReqInterval,
ptpbaseClockPortDSDelayMech,
ptpbaseClockPortDSPeerMeanPathDelay,
ptpbaseClockPortDSGrantDuration,
ptpbaseClockPortDSPTPVersion
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP portDS
information"
::= { ptpbaseMIBGroups 9 }
ptpbaseMIBClockPortRunningGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockPortRunningName,
ptpbaseClockPortRunningState,
ptpbaseClockPortRunningRole,
ptpbaseClockPortRunningInterfaceIndex,
ptpbaseClockPortRunningTransport,
ptpbaseClockPortRunningEncapsulationType,
ptpbaseClockPortRunningTxMode,
ptpbaseClockPortRunningRxMode,
ptpbaseClockPortRunningPacketsReceived,
ptpbaseClockPortRunningPacketsSent
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP running interface
information"
::= { ptpbaseMIBGroups 10 }
Shankarkumar, et al. Standards Track [Page 57]
RFC 8173 PTPv2 MIB June 2017
ptpbaseMIBClockPortTransDSGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockPortTransDSPortIdentity,
ptpbaseClockPortTransDSlogMinPdelayReqInt,
ptpbaseClockPortTransDSFaultyFlag,
ptpbaseClockPortTransDSPeerMeanPathDelay
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing PTP
transparentClockPortDS information"
::= { ptpbaseMIBGroups 11 }
ptpbaseMIBClockPortAssociateGroup OBJECT-GROUP
OBJECTS {
ptpbaseClockPortAssociatePacketsSent,
ptpbaseClockPortAssociatePacketsReceived,
ptpbaseClockPortAssociateAddress,
ptpbaseClockPortAssociateAddressType,
ptpbaseClockPortAssociateInErrors,
ptpbaseClockPortAssociateOutErrors
}
STATUS current
DESCRIPTION
"Group that aggregates objects describing information on peer
PTP ports for a given PTP clock port"
::= { ptpbaseMIBGroups 12 }
END
Shankarkumar, et al. Standards Track [Page 58]
RFC 8173 PTPv2 MIB June 2017
5. Security Considerations
There are no management objects defined in this MIB module that have
a MAX-ACCESS clause of read-write and/or read-create. So, if this
MIB module is implemented correctly, then there is no risk that an
intruder can alter or create any management objects of this MIB
module via direct SNMP SET operations.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP.
These are the tables and objects and their sensitivity/vulnerability:
ptpDomainClockPortsTotal, ptpbaseSystemDomainTotals, and
ptpbaseSystemProfile expose general information about the clock
system.
ptpbaseClockRunningState, ptpbaseClockRunningPacketsSent, and
ptpbaseClockRunningPacketsReceived expose a clock's current
running status.
ptpbaseClockCurrentDSStepsRemoved,
ptpbaseClockCurrentDSOffsetFromMaster, and
ptpbaseClockCurrentDSMeanPathDelay expose the values of a clock's
current dataset (currentDS).
ptpbaseClockParentDSParentPortIdentity,
ptpbaseClockParentDSParentStats, ptpbaseClockParentDSOffset,
ptpbaseClockParentDSClockPhChRate,
ptpbaseClockParentDSGMClockIdentity,
ptpbaseClockParentDSGMClockPriority1,
ptpbaseClockParentDSGMClockPriority2,
ptpbaseClockParentDSGMClockQualityClass,
ptpbaseClockParentDSGMClockQualityAccuracy, and
ptpbaseClockParentDSGMClockQualityOffset expose the values of a
clock's parent dataset (parentDS).
ptpbaseClockDefaultDSTwoStepFlag,
ptpbaseClockDefaultDSClockIdentity,
ptpbaseClockDefaultDSPriority1, ptpbaseClockDefaultDSPriority2,
ptpbaseClockDefaultDSSlaveOnly, ptpbaseClockDefaultDSQualityClass,
ptpbaseClockDefaultDSQualityAccuracy, and
ptpbaseClockDefaultDSQualityOffset expose the values of a clock's
default dataset (defaultDS).
Shankarkumar, et al. Standards Track [Page 59]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid,
ptpbaseClockTimePropertiesDSCurrentUTCOffset,
ptpbaseClockTimePropertiesDSLeap59,
ptpbaseClockTimePropertiesDSLeap61,
ptpbaseClockTimePropertiesDSTimeTraceable,
ptpbaseClockTimePropertiesDSFreqTraceable,
ptpbaseClockTimePropertiesDSPTPTimescale, and
ptpbaseClockTimePropertiesDSSource expose the values of a clock's
time properties dataset (timePropertiesDS).
ptpbaseClockTransDefaultDSClockIdentity,
ptpbaseClockTransDefaultDSNumOfPorts,
ptpbaseClockTransDefaultDSDelay, and
ptpbaseClockTransDefaultDSPrimaryDomain expose the values of a
transparent clock's default dataset (transparentClockDefaultDS).
ptpbaseClockPortName, ptpbaseClockPortRole,
ptpbaseClockPortSyncTwoStep,
ptpbaseClockPortCurrentPeerAddressType,
ptpbaseClockPortCurrentPeerAddress, and
ptpbaseClockPortNumOfAssociatedPorts expose general information
about a clock port.
ptpbaseClockPortRunningName, ptpbaseClockPortRunningState,
ptpbaseClockPortRunningRole,
ptpbaseClockPortRunningInterfaceIndex,
ptpbaseClockPortRunningTransport,
ptpbaseClockPortRunningEncapsulationType,
ptpbaseClockPortRunningTxMode, ptpbaseClockPortRunningRxMode,
ptpbaseClockPortRunningPacketsReceived, and
ptpbaseClockPortRunningPacketsSent expose a clock port's current
running status.
ptpbaseClockPortDSName, ptpbaseClockPortDSPortIdentity,
ptpbaseClockPortDSlogAnnouncementInterval,
ptpbaseClockPortDSAnnounceRctTimeout,
ptpbaseClockPortDSlogSyncInterval,
ptpbaseClockPortDSMinDelayReqInterval,
ptpbaseClockPortDSPeerDelayReqInterval,
ptpbaseClockPortDSDelayMech, ptpbaseClockPortDSPeerMeanPathDelay,
ptpbaseClockPortDSGrantDuration, and ptpbaseClockPortDSPTPVersion
expose the values of a clock port's port dataset (portDS).
ptpbaseClockPortTransDSPortIdentity,
ptpbaseClockPortTransDSlogMinPdelayReqInt,
ptpbaseClockPortTransDSFaultyFlag, and
ptpbaseClockPortTransDSPeerMeanPathDelay expose the values of a
transparent clock port's port dataset (transparentClockPortDS).
Shankarkumar, et al. Standards Track [Page 60]
RFC 8173 PTPv2 MIB June 2017
ptpbaseClockPortAssociateAddressType,
ptpbaseClockPortAssociateAddress,
ptpbaseClockPortAssociatePacketsSent,
ptpbaseClockPortAssociatePacketsReceived,
ptpbaseClockPortAssociateInErrors, and
ptpbaseClockPortAssociateOutErrors expose information about a
clock port's peer node.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example, by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET (read) the objects in this MIB module.
Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
recommended. Instead, it is recommended to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
those objects only to those principals (users) that have legitimate
rights to access them.
6. IANA Considerations
The MIB module defined in this document uses the following IANA-
assigned OBJECT IDENTIFIER value recorded in the "Structure of
Management Information (SMI) Numbers (MIB Module Registrations)"
registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
ptpbaseMIB { mib-2 241 }
Shankarkumar, et al. Standards Track [Page 61]
RFC 8173 PTPv2 MIB June 2017
7. References
7.1. Normative References
[IEEE-1588-2008]
IEEE, "IEEE Standard for a Precision Clock
Synchronization Protocol for Networked Measurement and
Control Systems", IEEE Std. 1588-2008,
DOI 10.1109/IEEESTD.2008.4579760.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578,
DOI 10.17487/RFC2578, April 1999,
<http://www.rfc-editor.org/info/rfc2578>.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD
58, RFC 2579, DOI 10.17487/RFC2579, April 1999,
<http://www.rfc-editor.org/info/rfc2579>.
[RFC2580] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Conformance Statements for SMIv2",
STD 58, RFC 2580, DOI 10.17487/RFC2580, April 1999,
<http://www.rfc-editor.org/info/rfc2580>.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414,
DOI 10.17487/RFC3414, December 2002,
<http://www.rfc-editor.org/info/rfc3414>.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in
the SNMP User-based Security Model", RFC 3826,
DOI 10.17487/RFC3826, June 2004,
<http://www.rfc-editor.org/info/rfc3826>.
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)", STD
78, RFC 5591, DOI 10.17487/RFC5591, June 2009,
<http://www.rfc-editor.org/info/rfc5591>.
Shankarkumar, et al. Standards Track [Page 62]
RFC 8173 PTPv2 MIB June 2017
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, DOI 10.17487/RFC5592, June
2009, <http://www.rfc-editor.org/info/rfc5592>.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
STD 78, RFC 6353, DOI 10.17487/RFC6353, July 2011,
<http://www.rfc-editor.org/info/rfc6353>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <http://www.rfc-editor.org/info/rfc8174>.
7.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410,
DOI 10.17487/RFC3410, December 2002,
<http://www.rfc-editor.org/info/rfc3410>.
[RFC5905] Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
"Network Time Protocol Version 4: Protocol and Algorithms
Specification", RFC 5905, DOI 10.17487/RFC5905, June
2010, <http://www.rfc-editor.org/info/rfc5905>.
[G.8265.1] ITU-T, "Precision time protocol telecom profile for
frequency synchronization", ITU-T Recommendation
G.8265.1, July 2014.
Acknowledgements
Thanks to John Linton and Danny Lee for their valuable comments and
to Bert Wijnen, Kevin Gross, Alan Luchuk, Chris Elliot, Brian
Haberman, and Dan Romascanu for their reviews of this MIB module.
Shankarkumar, et al. Standards Track [Page 63]
RFC 8173 PTPv2 MIB June 2017
Authors' Addresses
Vinay Shankarkumar
Cisco Systems
7100-9 Kit Creek Road
Research Triangle Park, NC 27709
United States of America
Email: vinays@cisco.com
Laurent Montini
Cisco Systems
11, rue Camille Desmoulins
92782 Issy-les-Moulineaux
France
Email: lmontini@cisco.com
Tim Frost
Calnex Solutions Ltd.
Oracle Campus
Linlithgow
EH49 7LR
United Kingdom
Email: tim.frost@calnexsol.com
Greg Dowd
Microsemi Inc.
3870 North First Street
San Jose, CA 95134
United States of America
Email: greg.dowd@microsemi.com
Shankarkumar, et al. Standards Track [Page 64]