💾 Archived View for perso.pw › blog › articles › nixos-hardened.gmi captured on 2023-04-26 at 13:26:59. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
This explains how to tweak your NixOS system to make it hardened in regards to security
Coming from an OpenBSD background, I wanted to harden my NixOS system for better security. As you may know (or not), security mitigations must be thought against a security threat model. My model here is to prevent web browsers to leak data, prevent services to be exploitable remotely and prevent programs from being exploited to run malicious code.
NixOS comes with a few settings to improve in these areas, I'll share a sample of configuration to increase the default security. Unrelated to security defense itself, but you should absolutely encrypt your filesystem, so in case of physical access to your computer no data could be extracted.
There are a few profiles available by default in NixOS which are files with a set of definitions and one of them is named "hardened" because it enables many security measures.
Link to the hardened profile definition
Here is a simplified list of important changes:
Of course, using this mode will slightly reduce the system performance and may trigger some runtime problems due to the memory management being less permissive. On one hand, it's good because it allows to catch programming errors, but on the other hand it's not fun to have your programs crashing when you need them.
With the scudo memory allocator, I have troubles running Firefox, it will only start after 2 or 3 crashes and then will work fine. There is a less permissive allocator named graphene-hardened, but I had too much troubles running programs with it.
One simple rule is to block any incoming traffic that would connect to listening services. It's way more secure to block everything and then allow the services you know must be open to the outside than relying on the service's configuration to not listen on public interfaces.
Clamav is an antivirus, and yes it can be useful on Linux. If it can prevent you at least once to run a hostile binary, then it's worth running it.
I featured firejail previously on my blog, I'm convinced of its usefulnes. You can run a program using firejail, and it will restrict its permissions and rights so in case of security breach, the program will be restricted.
This is rather important to run web browsers with it because it will prevent them any access to the filesystem except ~/Downloads/ and a few required directories (local profile, /etc/resolv.conf, font cache etc...).
Because NixOS is declarative, it's easy to share the configuration. My configuration supports both Firefox and Chromium, you can remove the related lines you don't need.
Be careful about the import declaration, you certainly already have one for the ./hardware-configuration.nix file.
imports =
[
./hardware-configuration.nix
<nixpkgs/nixos/modules/profiles/hardened.nix>
];
# enable firewall and block all ports
networking.firewall.enable = true;
networking.firewall.allowedTCPPorts = [];
networking.firewall.allowedUDPPorts = [];
# disable coredump that could be exploited later
# and also slow down the system when something crash
systemd.coredump.enable = false;
# required to run chromium
security.chromiumSuidSandbox.enable = true;
# enable firejail
programs.firejail.enable = true;
# create system-wide executables firefox and chromium
# that will wrap the real binaries so everything
# work out of the box.
programs.firejail.wrappedBinaries = {
firefox = {
executable = "${pkgs.lib.getBin pkgs.firefox}/bin/firefox";
profile = "${pkgs.firejail}/etc/firejail/firefox.profile";
};
chromium = {
executable = "${pkgs.lib.getBin pkgs.chromium}/bin/chromium";
profile = "${pkgs.firejail}/etc/firejail/chromium.profile";
};
};
# enable antivirus clamav and
# keep the signatures' database updated
services.clamav.daemon.enable = true;
services.clamav.updater.enable = true;
Rebuild the system, reboot and enjoy your new secure system.
If you want to absolutely control your network connections, I'd absolutely recommend the service OpenSnitch. This is a daemon that will listen to all the network done on the system and allow you to allow/block connections per executable/source/destination/protocol/many parameters.
OpenSnitch comes with a GUI app called opensnitch-ui which is mandatory, if the ui is not running, no filtering is done. When the ui is running, every time a new connection is not matching an existing rule, you will be prompted with information telling you what executable is trying to do on which protocol with which host, then you can decide how long you allow this (or block).
Just use `services.opensnitch.enable = true;` in the system configuration and run opensnitch-ui program in your graphical session. To have persistent rules, open opensnitch-ui, go in the Preferences menu and tab Database, choose "Database type: File" and pick a path to save it (it's a sqlite database).
From this point, you will have to allow / block all network done on your system, it can be time-consuming at first, but it's user-friendly enough and rules can be done like "allow this entire executable" so you don't have to allow every website visited by your web browser (but you could!). You may be surprised by the amount of traffic done by non networking programs. After some time, the rule set should be able to cope with most of your needs without needing to add new entries.