💾 Archived View for mirrors.apple2.org.za › archive › apple.cabi.net › FAQs.and.INFO › TelecomInfo ›… captured on 2023-03-20 at 22:54:45.
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
Newsgroups: comp.sys.apple2.comm Path: news.uiowa.edu!uunet!comp.vuw.ac.nz!actrix.gen.nz!dempson From: dempson@atlantis.actrix.gen.nz (David Empson) Subject: Re: Faxination v0.1.6 and ZyXEL Message-ID: <D9E65n.Bz1@actrix.gen.nz> Sender: news@actrix.gen.nz (News Administrator) Organization: Actrix - Internet Services Date: Tue, 30 May 1995 12:46:34 GMT References: <3qb8tq$onv@news.globalx.net> X-Nntp-Posting-Host: atlantis.actrix.gen.nz Lines: 55 In article <3qb8tq$onv@news.globalx.net>, Jeremy Rand <jeremy@gate.globalx.net> wrote: > I have been trying to get Faxination to work with my ZyXEL 1496E > modem for over a month now. I have tried versions four through six > now with no luck. What ROM version do you have in the ZyXEL? I haven't really got around to putting Faxination through its paces yet - I successfully sent a one page test fax, generated from my own TextEdit-based editor. I have a ZyXEL U-1496E, currently running ROM version 6.14. I think I had this version when I sent the test fax, but it might have been 6.13. (Version 6.14 adds Class 1 Fax support; 6.13 only supports Class 2 and 2.0.) > I always comes up with the check power, cables error on send or > receive. I have reset the modem to factory defaults and removed all > inits/cdevs/da's etc to no avail. I have a cable I made myself to > the proterm RTS/CTS spec in the manual. It has seemed to work fine > in proterm and GNO. My cable is as per the Spectrum manual. Handshake out goes to RTS and DTR (I have the modem configured to ignore DTR in its saved settings - I think Faxination uses ATZ as part of the init, rather than AT&F, but I haven't confirmed this). The general purpose input comes from DCD. > There was a message from the net a while back from someone getting > Faxination to work with the ZyXEL. Are there any parameter settings > I should be looking at? Thanks for any help you can provide. Here's a dump of my current settings, which should be pretty close to what I used when I last used Faxination. B0 E1 L4 M3 N5 Q0 V1 X5 &B1 &C1 &D0 &G0 &H0 &J0 &K4 &L0 &M0 &N0 &P1 &R1 &S0 &X0 &Y1