💾 Archived View for mirrors.apple2.org.za › archive › apple.cabi.net › FAQs.and.INFO › AwksGSinfo › … captured on 2023-03-20 at 22:42:11.
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
Path: blue.weeg.uiowa.edu!news.uiowa.edu!uunet!cs.utexas.edu!swrinde!sgiblab!darwin.sura.net!bcfreenet.seflin.lib.fl.us!bcfreenet.seflin.lib.fl.us!not-for-mail
From: z600660a@bcfreenet.seflin.lib.fl.us (Jeff Barbanell)
Newsgroups: comp.sys.apple2
Subject: Appleworks 5.0 printer correction
Date: 14 Jan 1995 11:01:56 -0500
Organization: SEFLIN Free-Net - Broward
Lines: 40
Message-ID: <3f8shk$4kk@bcfreenet.seflin.lib.fl.us>
NNTP-Posting-Host: bcfreenet.seflin.lib.fl.us
X-Newsreader: TIN [version 1.2 PL2]
The following information should help all of you who are using the Appleworks
5.0. there is a printing problem.
Interface card default printer setting is incorrect in 11/30/94 version of
Appleworks 5.0.
To correct, as advised by Bill Carver of Quality Comp.:
Go to interface card setting for the Imagewriter, and change the code,
FROM: control I 80N Escape C
TO: control I 80N Escape KO (capital letter O)
From Appleworks, open Apple "Q", open Apple "S" = Standard Settings
#17 = Printer Settings
# 4 = ImageWriter
# 6 = Interface Card
When it says: "is this correct?" say NO
Then - Control I, 80 N, Escape KO
OK
Return, shut down, reboot.
Hope this helps eveyone
--
c ul8r :)
######################################################################
# ______ #
# ||| ||| JEFF BARBANELL #
# ||| ||| #
# ----------- #
# | O| SEFLIN: z600660a@bcfreenet.seflin.lib.fl.us #
# | | #
# /-\ "TO BE ALL THAT YOU CAN BE, YOU MUST DREAM OF BEING #
# >>0<< MORE!!!" #
# #
######################################################################
Newsgroups: comp.sys.apple2
Path: blue.weeg.uiowa.edu!news.uiowa.edu!uunet!news.sprintlink.net!howland.reston.ans.net!news.starnet.net!wupost!waikato!comp.vuw.ac.nz!actrix.gen.nz!dempson
From: dempson@atlantis.actrix.gen.nz (David Empson)
Subject: Re: Appleworks 5.0 printer correction
Message-ID: <D2FBrH.L07@actrix.gen.nz>
Sender: news@actrix.gen.nz (News Administrator)
Organization: Actrix - New Zealand Internet Service Providers
Date: Sun, 15 Jan 1995 01:50:03 GMT
References: <3f8shk$4kk@bcfreenet.seflin.lib.fl.us>
X-Nntp-Posting-Host: atlantis.actrix.gen.nz
Lines: 29
In article <3f8shk$4kk@bcfreenet.seflin.lib.fl.us>,
Jeff Barbanell <z600660a@bcfreenet.seflin.lib.fl.us> wrote:
> The following information should help all of you who are using the Appleworks
> 5.0. there is a printing problem.
>
> Interface card default printer setting is incorrect in 11/30/94 version of
> Appleworks 5.0.
>
> To correct, as advised by Bill Carver of Quality Comp.:
>
> Go to interface card setting for the Imagewriter, and change the code,
> FROM: control I 80N Escape C
> TO: control I 80N Escape KO (capital letter O)
This is wrong. ESC K O is not a valid command for the ImageWriter.
It might be ESC K 0 (zero, not O), which sets the print colour to
black.
ESC C is not a valid command either. It could be ESC c (lower case
C), which does a software reset of the printer.
In any case, my copy of AppleWorks 5 (bought in mid December,
APLWORKS.SYSTEM dated 8 November) doesn't have any command in its
default ImageWriter printer interface codes apart from Ctrl-I 80N,
which is correct.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand