💾 Archived View for uscoffings.net › retro-computing › components › PC › interrupts › INTERRUP.F captured on 2023-03-20 at 21:32:02.
⬅️ Previous capture (2022-06-04)
-=-=-=-=-=-=-
Interrupt List, part 6 of 18
Copyright (c) 1989-1999,2000 Ralf Brown
--------O-20---------------------------------
INT 20 - Minix - SEND/RECEIVE MESSAGE
AX = process ID of other process
BX -> message
CX = operation (1 send, 2 receive, 3 send&receive)
Program: Minix is a Version 7 Unix-compatible operating system by Andrew
Tanenbaum
Note: the message contains the system call number (numbered as in V7
Unix(tm)) and the call parameters
--------D-20---------------------------------
INT 20 - DOS 1+ - TERMINATE PROGRAM
CS = PSP segment
Return: never
Notes: (see INT 21/AH=00h)
this function sets the program's return code (ERRORLEVEL) to 00h
SeeAlso: INT 21/AH=00h,INT 21/AH=4Ch
--------G-20---------------------------------
INT 20 - COMTROL HOSTESS i/ISA DEBUGGER - INVOKE FIRMWARE DEBUGGER
???
Return: ???
SeeAlso: INT 21"COMTROL"
--------W-20----Vx0001-----------------------
INT 20 P - Microsoft Windows - VMM - VxD SERVICES
VxD = 0001h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01265)
Values for VMM (VxD ID 0001h) service number:
0000h get version
0001h get current VM handle
0002h test current VM handle
0003h get system VM handle
0004h test system VM handle
0005h validate VM handle
0006h get VMM reenter count
0007h begin reentrant execution
0008h end reentrant execution
0009h install V86 breakpoint
000Ah remove V86 breakpoint
000Bh allocate V86 callback
000Ch allocation PM callback
000Dh call when VM returns
000Eh schedule global event
000Fh schedule VM event
0010h call global event
0011h call VM event
0012h cancel global event
0013h cancel VM event
0014h call priority VM event
0015h cancel priority VM event
0016h get NMI handler address
0017h set NMI handler address
0018h hook NMI event
0019h call when VM interrupts enabled
001Ah enable VM interrupts
001Bh disable VM interrupts
001Ch map flat
001Dh map linear to VM address
001Eh adjust execution priority
001Fh begin critical section
0020h end critical section
0021h end critical section and suspend
0022h claim critical section
0023h release critical section
0024h call when not critical
0025h create semaphore
0026h destroy semaphore
0027h wait on semaphore
0028h signal semaphore
0029h get critical section status
002Ah call when task switched
002Bh suspend VM
002Ch resume VM
002Dh no-fail resume VM
002Eh nuke VM
002Fh crash current VM
0030h get execution focus
0031h set execution focus
0032h get time slice priority
0033h set time slice priority
0034h get time slice granularity
0035h set time slice granularity
0036h get time slice information
0037h adjust execution time
0038h release time slice
0039h wake up VM
003Ah call when idle
003Bh get next VM handle
003Ch set global timeout
003Dh set VM timeout
003Eh cancel timeout
003Fh get system time
Return: EAX = time in milliseconds that Windows has been running
0040h get VM execution time
0041h hook V86 interrupt chain
0042h get V86 interrupt vector
0043h set V86 interrupt vector
0044h get PM interrupt vector
0045h set PM interrupt vector
0046h simulate interrupt
0047h simulate IRET
0048h simulate far call
0049h simulate far jump
004Ah simulate far RET
004Bh simulate far RET N
004Ch build interrupt stack frame
004Dh simulate push
004Eh simulate pop
004Fh _HeapAllocate
0050h _HeapReAllocate
0051h _HeapFree
0052h _HeapGetSize
0053h _PageAllocate
0054h _PageReAllocate
0055h _PageFree
0056h _PageLock
0057h _PageUnLock
0058h _PageGetSizeAddr
0059h _PageGetAllocInfo
005Ah _GetFreePageCount
005Bh _GetSysPageCount
005Ch _GetVMPgCount
005Dh _MapIntoV86
005Eh _PhysIntoV86
005Fh _TestGlobalV86Mem
0060h _ModifyPageBits
0061h copy page table
0062h map linear into V86
0063h linear page lock
0064h linear page unlock
0065h _SetResetV86Pageabl
0066h _GetV86PageableArray
0067h _PageCheckLinRange
0068h page out dirty pages
0069h discard pages
006Ah _GetNulPageHandle
006Bh get first V86 page
006Ch map physical address to linear address
006Dh _GetAppFlatDSAlias
006Eh _SelectorMapFlat
006Fh _GetDemandPageInfo
0070h _GetSetPageOutCount
0071h hook V86 page
0072h assign device V86 pages
0073h deassign device V86 pages
0074h get array of V86 pages for device
0075h _SetNULPageAddr
0076h allocate GDT selector
0077h free GDT selector
0078h allocate LDT selector
0079h free LDT selector
007Ah _BuildDescriptorDWORDs
007Bh get descriptor
007Ch set descriptor
007Dh toggle HMA
007Eh get fault hook addresses
007Fh hook V86 fault
0080h hook PM fault
0081h hook VMM fault
0082h begin nested V86 execution
0083h begin nested execution
0084h execute V86-mode interrupt
0085h resume execution
0086h end nested execution
0087h allocate PM application callback area
0088h get current PM application callback area
0089h set V86 execution mode
008Ah set PM execution mode
008Bh begin using locked PM stack
008Ch end using locked PM stack
008Dh save client state
008Eh restore client state
008Fh execute VxD interrupt
STACK: WORD interrupt number
other registers as required by interrupt call
Return: registers as returned by interrupt call
0090h hook device service
EAX = service ID (high word = VxD ID, low = service number)
ESI -> new handler
0091h hook device V86 API
0092h hook device PM API
0093h system control (see also #02657)
0094h simulate I/O
0095h install multiple I/O handlers
0096h install I/O handler
DX = I/O port address
ESI -> handler to call when I/O access attempted???
0097h enable global trapping
DX = I/O port address
0098h enable local trapping
DX = I/O port address
0099h disable global trapping
DX = I/O port address
009Ah disable local trapping
DX = I/O port address
009Bh create list
009Ch destroy list
009Dh allocate list
009Eh attach list
009Fh attach list tail
00A0h insert into list
00A1h remove from list
00A2h deallocate list
00A3h get first item in list
00A4h get next item in list
00A5h remove first item in list
00A6h add instance item
00A7h allocate device callback area
00A8h allocate global V86 data area
00A9h allocate temporary V86 data area
00AAh free temporary V86 data area
00ABh get decimal integer from profile
00ACh convert decimal string to integer
00ADh get fixed-point number from profile
00AEh convert fixed-point string
00AFh get hex integer from profile
00B0h convert hex string to integer
00B1h get boolean value from profile
00B2h convert boolean string
00B3h get string from profile
00B4h get next string from profile
00B5h get environment string
00B6h get exec path
00B7h get configuration directory
00B8h open file
00B9h get PSP segment
00BAh get DOS vectors
00BBh get machine information
00BCh get/set HMA information
00BDh set system exit code
00BEh fatal error handler
00BFh fatal memory error
00C0h update system clock
00C1h test if debugger installed
00C2h output debugger string
00C3h output debugger character
00C4h input debugger character
00C5h debugger convert hex to binary
00C6h debugger convert hex to decimal
00C7h debugger test if valid handle
00C8h validate client pointer
00C9h test reentry
00CAh queue debugger string
00CBh log procedure call
00CCh debugger test current VM
00CDh get PM interrupt type
00CEh set PM interrupt type
00CFh get last updated system time
00D0h get last updated VM execution time
00D1h test if double-byte character-set lead byte
00D2h _AddFreePhysPage
00D3h _PageResetHandlePAddr
00D4h _SetLastV86Page
00D5h _GetLastV86Page
00D6h _MapFreePhysReg
00D7h _UnmapFreePhysReg
00D8h _XchgFreePhysReg
00D9h _SetFreePhysRegCalBk
00DAh get next arena (MCB)
00DBh get name of ugly TSR
00DCh get debug options
00DDh set physical HMA alias
00DEh _GetGlblRng0V86IntBase
00DFh add global V86 data area
00E0h get/set detailed VM error
00E1h Is_Debug_Chr
00E2h clear monochrome screen
00E3h output character to mono screen
00E4h output string to mono screen
00E5h set current position on mono screen
00E6h get current position on mono screen
00E7h get character from mono screen
00E8h locate byte in ROM
00E9h hook invalid page fault
00EAh unhook invalid page fault
00EBh set delete on exit file
00ECh close VM
00EDh "Enable_Touch_1st_Meg"
00EEh "Disable_Touch_1st_Meg"
00EFh install exception handler
00F0h remove exception handler
00F1h "Get_Crit_Status_No_Block"
00F2h "_Schedule_VM_RTI_Event"
00F3h "_Trace_Out_Service"
00F4h "_Debug_Out_Service"
00F5h "_Debug_Flags_Service"
00F6h VMM add import module name
00F7h VMM Add DDB
00F8h VMM Remove DDB
00F9h get thread time slice priority
00FAh set thread time slice priority
00FBh schedule thread event
00FCh cancel thread event
00FDh set thread timeout
00FEh set asynchronous timeout
00FFh "_AllocatreThreadDataSlot"
0100h "_FreeThreadDataSlot"
0101h create Mutex
0102h destroy Mutex
0103h get Mutex owner
0104h call when thread switched
0105h create thread
0106h start thread
0107h terminate thread
0108h get current thread handle
0109h test current thread handle
010Ah "Get_Sys_Thread_Handle"
010Bh "Test_Sys_Thread_Handle"
010Ch "Validate_Thread_Handle"
010Dh "Get_Initial_Thread_Handle"
010Eh "Test_Initial_Thread_Handle"
010Fh "Debug_Test_Valid_Thread_Handle"
0110h "Debug_Test_Cur_Thread"
0111h "VMM_GetSystemInitState"
0112h "Cancel_Call_When_Thread_Switched"
0113h "Get_Next_Thread_Handle"
0114h "Adjust_Thread_Exec_Priority"
0115h "_Deallocate_Device_CB_Area"
0116h "Remove_IO_Handler"
0117h "Remove_Mult_IO_Handlers"
0118h unhook V86 interrupt chain
0119h unhook V86 fault handler
011Ah unhook PM fault handler
011Bh unhook VMM fault handler
011Ch unhook device service
011Dh "_PageReserve"
011Eh "_PageCommit"
011Fh "_PageDecommit"
0120h "_PagerRegister"
0121h "_PagerQuery"
0122h "_PagerDeregister"
0123h "_ContextCreate"
0124h "_ContextDestroy"
0125h "_PageAttach"
0126h "_PageFlush"
0127h "_SignalID"
0128h "_PageCommitPhys"
0129h "_Register_Win32_Services"
012Ah "Cancel_Call_When_Not_Critical"
012Bh "Cancel_Call_When_Idle"
012Ch "Cancel_Call_When_Task_Switched"
012Dh "_Debug_Printf_Service"
012Eh enter Mutex
012Fh leave Mutex
0130h simulate VM I/O
0131h "Signal_Semaphore_No_Switch"
0132h "_MMSwitchContext"
0133h "_MMModifyPermissions"
0134h "_MMQuery"
0135h "_EnterMustComplete"
0136h "_LeaveMustComplete"
0137h "_ResumeExecMustComplete"
0138h get thread termination status
0139h "_GetInstanceInfo"
013Ah "_ExecIntMustComplete"
013Bh "_ExecVxDIntMustComplete"
013Ch begin V86 serialization
013Dh unhook V86 page
013Eh "VMM_GetVxDLocationList"
013Fh "VMM_GetDDBList" get start of VxD chain
(see also #02657 at INT 2F/AX=1684h/BX=0017h)
0140h unhook NMI event
0141h "Get_Instanced_V86_Int_Vector"
0142h get or set real DOS PSP
0143h call priority thread event
0144h "Get_System_Time_Address"
0145h "Get_Crit_Status_Thread"
0146h "Get_DDB"
0147h "Directed_Sys_Control"
0148h "_RegOpenKey"
0149h "_RegCloseKey"
014Ah "_RegCreateKey"
014Bh "_RegDeleteKey"
014Ch "_RegEnumKey"
014Dh "_RegQueryValue"
014Eh "_RegSetValue"
014Fh "_RegDeleteValue"
0150h "_RegEnumValue"
0151h "_RegQueryValueEx"
0152h "_RegSetValueEx"
0153h "_CallRing3"
0154h "Exec_PM_Int"
0155h "_RegFlushKey"
0156h "_PageCommitContig"
0157h "_GetCurrentContext"
0158h "_LocalizeSprintf"
0159h "_LocalizeStackSprintf"
015Ah "Call_Restricted_Event"
015Bh "Cancel_Restricted_Event"
015Ch "Register_PEF_Provider"
015Dh "_GetPhysPageInfo"
015Eh "_RegQueryInfoKey"
015Fh "MemArb_Reserve_Pages"
0160h "Time_Slice_Sys_VM_Idle"
0161h "Time_Slice_Sleep"
0162h "Boost_With_Decay"
0163h "Set_Inversion_Pri"
0164h "Reset_Inversion_Pri"
0165h "Release_Inversion_Pri"
0166h "Get_Thread_Win32_Pri"
0167h "Set_Thread_Win32_Pri"
0168h "Set_Thread_Static_Boost"
0169h "Set_VM_Static_Boost"
016Ah "Release_Inversion_Pri_ID"
016Bh "Attach_Thread_To_Group"
016Ch "Detach_Thread_From_Group"
016Dh "Set_Group_Static_Boost"
016Eh "_GetRegistryPath"
016Fh "_GetRegistryKey"
0170h "_CleanupNestedExec"
0171h "_RegRemapPreDefKey"
0172h "End_V86_Serialization"
0173h "_Assert_Range"
0174h "_Sprintf"
0175h "_PageChangePager"
0176h "_RegCreateDynKey"
0177h "RegQMulti"
0178h "Boost_Thread_With_VM"
0179h "Get_Boot_Flags"
017Ah "Set_Boot_Flags"
017Bh "_lstrcpyn"
017Ch "_lstrlen"
017Dh "_lmemcpy"
017Eh "_GetVxDName"
017Fh "Force_Mutexes_Free"
0180h "Restore_Forced_Mutexes"
0181h "_AddReclaimableItem"
0182h "_SetReclaimableItem"
0183h "_EnumReclaimableItem"
0184h "Time_Slice_Wake_Sys_VM"
0185h "VMM_Replace_Global_Environment"
0186h "Begin_Non_Serial_Nest_V86_Exec"
0187h "Get_Nest_Exec_Status"
0188h "Open_Boot_Log"
0189h "Write_Boot_Log"
018Ah "Close_Boot_Log"
018Bh "EnableDisable_Boot_Log"
018Ch "_Call_On_My_Stack"
018Dh "Get_Inst_V86_Int_Vec_Base"
018Eh "_lstrcmpi"
018Fh "_strupr"
0190h "Log_Fault_Call_Out"
0191h "_AtEventTime"
0191h ...last service for Windows95 SP1
811Ch unhook device service??? (called by KEYREMAP.VXD)
EAX = service ID (high word = VxD ID, low = service number)
ESI -> handler
SeeAlso: #01266,#01267,INT 2F/AX=1684h/BX=0001h
--------W-20----Vx0002-----------------------
INT 20 P - Microsoft Windows - DEBUG - VxD SERVICES
VxD = 0002h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01266,#01340
(Table 01266)
Values for DEBUG (VxD ID 0002h) service number:
0000h get version
0001h "DEBUG_Fault"
0002h "DEBUG_CheckFault"
0003h "_DEBUG_LoadSyms"
SeeAlso: #01265,#01267
--------W-20----Vx0003-----------------------
INT 20 P - Microsoft Windows - VPICD - VxD SERVICES
VxD = 0003h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01267,#01340
(Table 01267)
Values for VPICD (VxD ID 0003h) service number:
0000h get version
0001h virtualize IRQ
0002h set interrupt request
0003h clear interrupt request
0004h physical EOI
0005h get complete status
0006h get status
0007h test physical request
0008h physically mask
0009h physically unmask
000Ah set automatic masking
000Bh get IRQ complete status
000Ch convert handle to IRQ
000Dh convert IRQ to interrupt
000Eh convert interrupt to IRQ
000Fh call on hardware interrupt
0010h force default owner
0011h force default behavior
0012h "VPICD_Auto_Mask_At_Inst_Swap"
0013h "VPICD_Begin_Inst_Page_Swap"
0014h "VPICD_End_Inst_Page_Swap"
0015h "VPICD_Virtual_EOI"
0016h "VPICD_Get_Virtualization_Count"
0017h "VPICD_Post_Sys_Critical_Init"
0018h "VPICD_VM_SlavePIC_Mask_Change"
SeeAlso: #01265,#01268,INT 2F/AX=1684h/BX=0003h
--------W-20----Vx0004-----------------------
INT 20 P - Microsoft Windows - VDMAD - VxD SERVICES
VxD = 0004h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01268)
Values for VDMAD (VxD ID 0004h) service number:
0000h get version
0001h virtualize channel
0002h get region information
0003h set region information
0004h get virtual state
0005h set virtual state
0006h set physical state
0007h mask channel
0008h unmask channel
0009h lock DMA region
000Ah unlock DMA region
000Bh scatter lock
000Ch scatter unlock
000Dh reserve buffer space
000Eh request buffer
000Fh release buffer
0010h copy to buffer
0011h copy from buffer
0012h default handler
0013h disable translation
0014h enable translation
0015h get EISA address mode
0016h set EISA address mode
0017h unlock DMA region (ND)
0018h "VDMAD_Phys_Mask_Channel"
0019h "VDMAD_Phys_Unmask_Channel"
001Ah "VDMAD_Unvirtualize_Channel"
001Bh "VDMAD_Set_IO_Address"
001Ch "VDMAD_Get_Phys_Count"
001Dh "VDMAD_Get_Phys_Status"
001Eh "VDMAD_Get_Max_Phys_Page"
001Fh "VDMAD_Set_Channel_Callbacks"
0020h "VDMAD_Get_Virt_Count"
0021h "VDMAD_Set_Virt_Count"
0021h ...last service for Windows95 SP1
SeeAlso: #01267,#02646,#02683 at INT 2F/AX=1684h/BX=0444h
--------W-20----Vx0005-----------------------
INT 20 P - Microsoft Windows - VTD - VxD SERVICES
VxD = 0005h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01269)
Values for VTD (VxD ID 0005h) service number:
0000h get version
0001h update system clock
0002h get interrupt period
0003h begin minimum interrupt period
0004h end minimum interrupt period
0005h disable trapping
0006h enable trapping
0007h get real time
Return: EDX:EAX = time in 840ns units since Windows was started
0008h "VTD_Get_Date_And_Time"
0009h "VTD_Adjust_VM_Count"
000Ah "VTD_Delay"
SeeAlso: #02646 at INT 2F/AX=1684h/BX=0005h
--------W-20----Vx0006-----------------------
INT 20 P - Microsoft Windows - V86MMGR - VxD SERVICES
VxD = 0006h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01270)
Values for V86MMGR (VxD ID 0006h) service number:
00h get version
01h allocate V86 pages
02h set EMS and XMS limits
03h get EMS and XMS limits
04h set mapping information
05h get mapping information
06h Xlat API
07h load client pointer
08h allocate buffer
09h free buffer
0Ah get Xlat buffer state
0Bh set Xlat buffer state
0Ch get VM flat selector
0Dh map pages
0Eh free page map region
0Fh _LocalGlobalReg
10h get page status
11h set local A20
12h reset base pages
13h set available mapped pages
14h "V86MMGR_NoUMBInitCalls"
15h "V86MMGR_Get_EMS_XMS_Avail"
16h "V86MMGR_Toggle_HMA"
EAX = ???
17h "V86MMGR_Dev_Init"
18h "V86MMGR_Alloc_UM_Page"
SeeAlso: #02646,#01271,INT 2F/AX=1684h"DEVICE API"
--------W-20----Vx0007-----------------------
INT 20 P - Microsoft Windows - PageSwap - VxD SERVICES
VxD = 0007h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01271)
Values for PageSwap (VxD ID 0007h) service number:
00h get version
01h test create
02h create swap file
03h destroy swap file
04h in
05h out
06h test if I/O valid
07h "Read_Or_Write"
08h "Grow_File"
09h "Init_File"
SeeAlso: #01270,#01272,#01273,#02648
--------W-20----Vx0009-----------------------
INT 20 P - Microsoft Windows - REBOOT - VxD SERVICES
VxD = 0009h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01272)
Values for REBOOT (VxD ID 0009h) service number:
00h get REBOOT version???
01h ???
02h ???
03h ...last service for Windows95 SP1
SeeAlso: #01271,#01273,#02642
--------W-20----Vx000A-----------------------
INT 20 P - Microsoft Windows - VDD - VxD SERVICES
VxD = 000Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01273)
Values for VDD (VxD ID 000Ah) service number:
00h get version
01h PIF state
02h get GrabRtn
03h hide cursor
04h set VM type
05h get ModTime
06h set HCurTrk
07h message clear screen
08h message foreground color
09h message background color
0Ah message output text
0Bh message set cursor position
0Ch query access
0Dh "VDD_Check_Update_Soon"
0Eh "VDD_Get_Mini_Dispatch_Table"
0Fh "VDD_Register_Virtual_Port"
DX = base I/O port number
CL = number of contiguous ports???
10h "VDD_Get_VM_Info"
11h "VDD_Get_Special_VM_IDs"
Return: ESI = ???
EDI = ???
12h "VDD_Register_Extra_Screen_Selector"
13h "VDD_Takeover_VGA_Port"
DX = VGA I/O port number (03C2h, etc.)
ECX -> routine to call on I/O access
Return: ECX -> previous handler (to be jumped to at end of new handler)
14h ???
15h ???
16h ...last service for Windows95 SP1
SeeAlso: #01272,#01274,#02648
--------W-20----Vx000B-----------------------
INT 20 P - Microsoft Windows - VSD - VxD SERVICES
VxD = 000Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01274)
Values for VSD (VxD ID 000Bh) service number:
00h get version
01h bell
02h sound on
03h "VSD_TakeSoundPort"
SeeAlso: #01273,#01275
--------W-20----Vx000C-----------------------
INT 20 P - Microsoft Windows - VMD / VMOUSE - VxD SERVICES
VxD = 000Ch
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01275)
Values for VMD / VMOUSE (VxD ID 000Ch) service number:
0000h get version
0001h set mouse type
0002h get mouse owner
0003h "VMOUSE_Post_Pointer_Message"
0004h "VMOUSE_Set_Cursor_Proc"
0005h "VMOUSE_Call_Cursor_Proc"
0006h "VMOUSE_Set_Mouse_Data~Get_Mouse_Data"
0007h "VMOUSE_Manipulate_Pointer_Message"
0008h "VMOUSE_Set_Middle_Button"
0009h "VMD_Set_Middle_Button"
000Ah "VMD_Enable_Disable_Mouse_Events"
000Bh "VMD_Post_Absolute_Pointer_Message"
...last service for Windows95 SP1
SeeAlso: #01274,#01276,INT 2F/AX=1684h/BX=000Ch
--------W-20----Vx000D-----------------------
INT 20 P - Microsoft Windows - VKD - VxD SERVICES
VxD = 000Dh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01276)
Values for VKD (VxD ID 000Dh) service number:
0000h get version
0001h define hotkey
0002h remove hotkey
0003h locally enable hotkey
0004h locally disable hotkey
0005h reflect hotkey
0006h cancel hotkey state
0007h force keys
0008h get keyboard owner
0009h define paste mode
000Ah start pasting
000Bh cancel paste
000Ch get message key
000Dh peek message key
000Eh flush message key queue
000Fh "VKD_Enable_Keyboard"
0010h "VKD_Disable_Keyboard"
0011h "VKD_Get_Shift_State"
0012h "VKD_Filter_Keyboard_Input"
0013h "VKD_Put_Byte"
0014h "VKD_Set_Shift_State"
...last service for Windows95 SP1
SeeAlso: #01275,#01277
--------W-20----Vx000E-----------------------
INT 20 P - Microsoft Windows - VCD - VxD SERVICES
VxD = 000Eh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01277)
Values for VCD (VxD ID 000Eh) service number:
0000h get version
0001h set port global
0002h get focus
0003h virtualize port
0004h "VCD_Acquire_Port"
0005h "VCD_Free_Port"
0006h "VCD_Acquire_Port_Windows_Style"
0007h "VCD_Free_Port_Windows_Style"
0008h "VCD_Steal_Port_Windows_Style"
0009h "VCD_Find_COM_Index"
000Ah "VCD_Set_Port_Global_Special"
000Bh "VCD_Virtualize_Port_Dynamic"
000Ch "VCD_Unvirtualize_Port_Dynamic"
...last service for Windows95 SP1
SeeAlso: #01276,#01278
--------W-20----Vx0010-----------------------
INT 20 P - Microsoft Windows - BlockDev / IOS - VxD SERVICES
VxD = 0010h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01278)
Values for BlockDev/IOS (VxD ID 0010h) service number:
0000h get version
0001h register device
0002h find INT 13 drive
0003h get device list
0004h send command
0005h command complete
0006h synchronous command
0007h "IOS_Register"
0008h "IOS_Requestor_Service"
0009h "IOS_Exclusive_Access"
000Ah "IOS_Send_Next_Command"
000Bh "IOS_Set_Async_Time_Out"
000Ch "IOS_Signal_Semaphore_No_Switch"
000Dh "IOSIdleStatus"
000Eh "IOSMapIORSToI24"
000Fh "IOSMapIORSToI21"
0010h "PrintLog"
SeeAlso: #01277,#01279
--------W-20----Vx0011-----------------------
INT 20 P - Microsoft Windows - VMCPD - VxD SERVICES
VxD = 0011h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01279)
Values for VMCPD (VxD ID 0011h) service number:
0000h "VMCPD_Get_Version"
0001h "VMCPD_Get_Virt_State"
0002h "VMCPD_Set_Virt_State"
0003h "VMCPD_Get_CR0_State"
0004h "VMCPD_Set_CR0_State"
0005h "VMCPD_Get_Thread_State"
0006h "VMCPD_Set_Thread_State"
0007h "_VMCPD_Get_FP_Instruction_Size"
0008h "VMCPD_Set_Thread_Precision"
SeeAlso: #01278,#01280,#02642
--------W-20----Vx0012-----------------------
INT 20 P - Microsoft Windows - EBIOS - VxD SERVICES
VxD = 0012h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01280)
Values for EBIOS (VxD ID 0012h) service number:
00h get EBIOS version
01h get unused memory
SeeAlso: #01279,#01281
--------W-20----Vx0014-----------------------
INT 20 P - Microsoft Windows - VNETBIOS - VxD SERVICES
VxD = 0014h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01281)
Values for VNETBIOS (VxD ID 0014h) service number:
00h get version
01h register
02h submit
03h enum
04h deregister
05h register2
06h map
07h enum2
SeeAlso: #01280,#01282
--------W-20----Vx0015-----------------------
INT 20 P - Microsoft Windows - DOSMGR - VxD SERVICES
VxD = 0015h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01282)
Values for DOSMGR (VxD ID 0015h) service number:
0000h get version
0001h set exec VM data
0002h coyp VM drive state
0003h execute VM
0004h get InDOS pointer
0005h add device
0006h remove device
0007h instance device
0008h get DOS critical status
0009h enable InDOS polling
000Ah backfill allowed
000Bh "LocalGlobalReg"
000Ch "Init_UMB_Area"
000Dh "Begin_V86_App"
000Eh "End_V86_App"
000Fh "Alloc_Local_Sys_VM_Mem"
EAX = number of paragraphs??? to allocate
0010h "DOSMGR_Grow_CDSs"
0011h "DOSMGR_Translate_Server_DOS_Call"
0012h "DOSMGR_MMGR_PSP_Change_Notifier"
SeeAlso: #01281,#02656 at INT 2F/AX=1684h/BX=0015h
--------W-20----Vx0017-----------------------
INT 20 P - Microsoft Windows - SHELL - VxD SERVICES
VxD = 0017h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01283)
Values for SHELL (VxD ID 0017h) service number:
0000h get version
0001h resolve contention
0002h event
0003h SYSMODAL message
0004h message
0005h get VM information
0006h "_SHELL_PostMessage"
0007h "_SHELL_WinExec"
0008h "_SHELL_CallDll"
0009h "SHELL_OpenClipboard"
000Ah "SHELL_SetClipboardData"
000Bh "SHELL_GetClipboardData"
000Ch "SHELL_CloseClipboard"
000Dh "_SHELL_Install_Taskman_Hooks"
000Eh "SHELL_Hook_Properties"
000Fh "SHELL_Unhook_Properties"
0010h "SHELL_OEMKeyScan"
0011h "SHELL_Update_User_Activity"
0012h "_SHELL_UnhookSystemBroadcast"
0013h "_SHELL_LocalAllocEx"
0014h "_SHELL_LocalFree"
0015h "_SHELL_LoadLibrary"
0016h "_SHELL_FreeLibrary"
0017h "_SHELL_GetProcAddress"
0018h "_SHELL_CallDll"
0019h "_SHELL_SuggestSingleMSDOSMode"
001Ah "SHELL_CheckHotkeyAllowed"
001Bh "_SHELL_GetDOSAppInfo"
SeeAlso: #01282,#01284,#02657 at INT 2F/AX=1684h/BX=0017h
--------W-20----Vx0018-----------------------
INT 20 P - Microsoft Windows - VMPoll - VxD SERVICES
VxD = 0018h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01284)
Values for VMPoll (VxD ID 0018h) service number:
00h get version
01h enable/disable
02h reset detection
03h check idle
SeeAlso: #01269,#02657 at INT 2F/AX=1684h/BX=0017h
--------W-20----Vx001A-----------------------
INT 20 P - Microsoft Windows - DOSNET - VxD SERVICES
VxD = 001Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01285)
Values for DOSNET (VxD ID 001Ah) service number:
00h get version
01h send FILESYSCHANGE
02h do PSP adjust
SeeAlso: #01284,#01286
--------W-20----Vx001B-----------------------
INT 20 P - Microsoft Windows - VFD - VxD SERVICES
VxD = 001Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01286,#01340
(Table 01286)
Values for VFD (VxD ID 001Bh) service number:
0000h get version
SeeAlso: #01285,#01287
--------W-20----Vx001C-----------------------
INT 20 P - Microsoft Windows - LoadHi - VxD SERVICES
VxD = 001Ch
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01287)
Values for LoadHi (VxD ID 001Ch) service number:
00h get version
Return: CF clear
EAX = version (AH = major, AL = minor)
ESI -> ASCIZ signature "LoadHi"
SeeAlso: #01286,#01288
--------W-20----Vx0020-----------------------
INT 20 P - Microsoft Windows - Int13 - VxD SERVICES
VxD = 0020h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01288)
Values for Int13 (VxD ID 0020h) service number:
00h get version
01h device registered
02h translate VM interrupt
03h hooking BIOS interrupt
04h unhooking BIOS interrupt
SeeAlso: #01287,#01289
--------W-20----Vx0021-----------------------
INT 20 P - Microsoft Windows - PAGEFILE - VxD SERVICES
VxD = 0021h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01289)
Values for PAGEFILE (VxD ID 0021h) service number:
00h get version
01h init file
02h clean up
03h grow file
04h read or write
05h cancel
06h test I/O valid
07h "Get_Size_Info"
08h "Set_Async_Manager"
09h "Call_Async_Manager"
SeeAlso: #01288,#02661 at INT 2F/AX=1684h/BX=0021h
--------W-20----Vx0026-----------------------
INT 20 P - Microsoft Windows - VPOWERD - VxD SERVICES
VxD = 0026h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01290)
Values for VPOWERD (VxD ID 0026h) service number:
00h get version
Return: CF clear
EAX = version (AH = major, AL = minor)
01h get APM BIOS version
Return: CF clear
EAX = APM BIOS version
02h get current power management level
Return: CF clear
EAX = power management level
03h enable/disable power management (see INT 15/AX=5308h)
Return: EAX = error code (see #02665) or 00000000h if successful
04h set power state (see INT 15/AX=5307h)
???
Return: EAX = error code (see #02665) or 00000000h if successful
05h set system power status
Return: EAX = error code (see #02665) or 00000000h if successful
06h restore APM power-on defaults (see INT 15/AX=5309h)
Return: EAX = error code (see #02665) or 00000000h if successful
07h get power status (see INT 15/AX=530Ah)
Return: ???
08h get APM 1.1 power state (see INT 15/AX=530Ch)
Return: ???
09h invoke OEM APM function
??? -> bufer containing parameters for INT 15/AX=5380h
Return: EAX = error code (see #02665) or 00000000h if successful
buffer updated if successful
0Ah register power handler
???
Return: EAX = error code (see #02665) or 00000000h if successful
0Bh deregister power handler
???
Return: EAX = error code (see #02665) or 00000000h if successful
0Ch Win32 get system power status
0Dh Win32 set system power status
SeeAlso: #01289,#01291,INT 2F/AX=1684h/BX=0026h
--------W-20----Vx0027-----------------------
INT 20 P - Microsoft Windows - VXDLDR - VxD SERVICES
VxD = 0027h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01291)
Values for VXDLDR (VxD ID 0027h) service number:
0000h "VXDLDR_Get_Version"
0001h "VXDLDR_LoadDevice"
0002h "VXDLDR_UnloadDevice"
0003h "VXDLDR_DevInitSucceeded"
0004h "VXDLDR_DevInitFailed"
0005h "VXDLDR_GetDeviceList"
0006h "VXDLDR_UnloadMe"
0007h "PELDR_LoadModule"
0008h "PELDR_GetModuleHandle"
0009h "PELDR_GetModuleUsage"
000Ah "PELDR_GetEntryPoint"
000Bh "PELDR_GetProcAddress"
000Ch "PELDR_AddExportTable"
000Dh "PELDR_RemoveExportTable"
000Eh "PELDR_FreeModule"
000Fh "VXDLDR_Notify"
0010h "_PELDR_InitCompleted"
0011h "_PELDR_LoadModuleEx"
SeeAlso: #01289,#01292
--------W-20----Vx0028-----------------------
INT 20 P - Microsoft Windows - NDIS - VxD SERVICES
VxD = 0028h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01292)
Values for NDIS (VxD ID 0028h) service number:
00h "NdisGetVersion"
01h "NdisAllocateSpinLock"
02h "NdisFreeSpinLock"
03h "NdisAcquireSpinLock"
04h "NdisReleaseSpinLock"
05h "NdisOpenConfiguration"
06h "NdisReadConfiguration"
07h "NdisCloseConfiguration"
08h "NdisReadEisaSlotInformation"
09h "NdisReadMcaPosInformation"
0Ah "NdisAllocateMemory"
0Bh "NdisFreeMemory"
0Ch "NdisSetTimer"
0Dh "NdisCancelTimer"
0Eh "NdisStallExecution"
0Fh "NdisInitializeInterrupt"
10h "NdisRemoveInterrupt"
11h "NdisSynchronizeWithInterrupt"
12h "NdisOpenFile"
13h "NdisMapFile"
14h "NdisUnmapFile"
15h "NdisCloseFile"
16h "NdisAllocatePacketPool"
17h "NdisFreePacketPool"
18h "NdisAllocatePacket"
19h "NdisReinitializePacket"
1Ah "NdisFreePacket"
1Bh "NdisQueryPacket"
1Ch "NdisAllocateBufferPool"
1Dh "NdisFreeBufferPool"
1Eh "NdisAllocateBuffer"
1Fh "NdisCopyBuffer"
20h "NdisFreeBuffer"
21h "NdisQueryBuffer"
22h "NdisGetBufferPhysicalAddress"
23h "NdisChainBufferAtFront"
24h "NdisChainBufferAtBack"
25h "NdisUnchainBufferAtFront"
26h "NdisUnchainBufferAtBack"
27h "NdisGetNextBuffer"
28h "NdisCopyFromPacketToPacket"
29h "NdisRegisterProtocol"
2Ah "NdisDeregisterProtocol"
2Bh "NdisOpenAdapter"
2Ch "NdisCloseAdapter"
2Dh "NdisSend"
2Eh "NdisTransferData"
2Fh "NdisReset"
30h "NdisRequest"
31h "NdisInitializeWrapper"
32h "NdisTerminateWrapper"
33h "NdisRegisterMac"
34h "NdisDeregisterMac"
35h "NdisRegisterAdapter"
36h "NdisDeregisterAdapter"
37h "NdisCompleteOpenAdapter"
38h "NdisCompleteCloseAdapter"
39h "NdisCompleteSend"
3Ah "NdisCompleteTransferData"
3Bh "NdisCompleteReset"
3Ch "NdisCompleteRequest"
3Dh "NdisIndicateReceive"
3Eh "NdisIndicateReceiveComplete"
3Fh "NdisIndicateStatus"
40h "NdisIndicateStatusComplete"
41h "NdisCompleteQueryStatistics"
42h "NdisEqualString"
43h "NdisNetAddressStringToBinary"
44h "NdisReadNetworkAddress"
45h "NdisWriteErrorLogEntry"
46h "C_MapPhysToLinear"
47h "C_HeapFree"
48h "NdisAllocateSharedMemory"
49h "NdisFreeSharedMemory"
...
5Fh ...last service for Windows95 SP1
SeeAlso: #01291,#01293
--------W-20----Vx002A-----------------------
INT 20 P - Microsoft Windows - VWIN32 - VxD SERVICES
VxD = 002Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01293)
Values for VWIN32 (VxD ID 002Ah) service number:
0000h "VWin32_Get_Version"
0001h "VWin32_Wake_For_Event"
0002h "_VWIN32_QueueUserApc"
0003h "_VWIN32_Get_Thread_Context"
0004h "_VWIN32_Set_Thread_Context"
0005h "_VWIN32_CopyMem"
0006h "_VWIN32_BlockForTermination"
0007h "_VWIN32_Emulate_Npx"
0008h "_VWIN32_CheckDelayedNpxTrap"
0009h "VWIN32_EnterCrstR0"
000Ah "VWIN32_LeaveCrstR0"
000Bh "_VWIN32_FaultPopup"
000Ch "VWIN32_GetContextHandle"
000Dh "VWIN32_GetCurrentProcessHandle"
000Eh "_VWIN32_SetWin32Event"
000Fh "_VWIN32_PulseWin32Event"
0010h "_VWIN32_ResetWin32Event"
0011h "_VWIN32_WaitSingleObject"
0012h "_VWIN32_WaitMultipleObjects"
0013h "_VWIN32_CreateRing0Thread"
0014h "_VWIN32_CloseVxDHandle"
0015h "VWIN32_ActiveTimeBiasSet"
0016h "VWIN32_GetCurrentDirectory"
0017h "VWIN32_BlueScreenPopup"
0018h "VWIN32_TerminateApp"
0019h "_VWIN32_QueueKernelAPC"
001Ah "VWIN32_SysErrorBox"
001Bh "_VWIN32_IsClientWin32"
001Ch "VWIN32_IFSRIPWhenLev2Taken"
SeeAlso: #01292,#01294
--------W-20----Vx002B-----------------------
INT 20 P - Microsoft Windows - VCOMM - VxD SERVICES
VxD = 002Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01294)
Values for VCOMM (VxD ID 002Bh) service number:
0000h "VCOMM_Get_Version"
0001h "_VCOMM_Register_Port_Driver"
0002h "_VCOMM_Acquire_Port"
0003h "_VCOMM_Release_Port"
0004h "_VCOMM_OpenComm"
0005h "_VCOMM_SetCommState"
0006h "_VCOMM_GetCommState"
0007h "_VCOMM_SetupComm"
0008h "_VCOMM_TransmitCommChar"
0009h "_VCOMM_CloseComm"
000Ah "_VCOMM_GetCommQueueStatus"
000Bh "_VCOMM_ClearCommError"
000Ch "_VCOMM_GetModemStatus"
000Dh "_VCOMM_GetCommProperties"
000Eh "_VCOMM_EscapeCommFunction"
000Fh "_VCOMM_PurgeComm"
0010h "_VCOMM_SetCommEventMask"
0011h "_VCOMM_GetCommEventMask"
0012h "_VCOMM_WriteComm"
0013h "_VCOMM_ReadComm"
0014h "_VCOMM_EnableCommNotification"
0015h "_VCOMM_GetLastError"
0016h "_VCOMM_Steal_Port"
0017h "_VCOMM_SetReadCallBack"
0018h "_VCOMM_SetWriteCallBack"
0019h "_VCOMM_GetSetCommTimeouts"
001Ah "_VCOMM_SetWriteRequest"
001Bh "_VCOMM_SetReadRequest"
001Ch "_VCOMM_Dequeue_Request"
001Dh "_VCOMM_Dequeue_Request"
001Eh "_VCOMM_Enumerate_DevNodes"
001Fh "VCOMM_Map_Win32DCB_To_Ring0"
0020h "VCOMM_Map_Ring0DCB_To_Win32"
0021h "_VCOMM_Get_Contention_Handler"
0022h "_VCOMM_Map_Name_To_Resource"
SeeAlso: #01293,#01295
--------W-20----Vx002C-----------------------
INT 20 P - Microsoft Windows - SPOOLER - VxD SERVICES
VxD = 002Ch
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01295)
Values for SPOOLER (VxD ID 002Ch) service number:
0000h get version???
0001h ???
0010h ...last service for Windows95 SP1
SeeAlso: #01294,#01296
--------W-20----Vx0032-----------------------
INT 20 P - Microsoft Windows - VSERVER - VxD SERVICES
VxD = 0032h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01296)
Values for VSERVER (VxD ID 0032h) service number:
00h get VSERVER version
Return: CF clear
EAX = version (AH = major, AL = minor)
EBX = ??? (00000000h)
01h allocate ???
AX = ???
ESI = ???
Return: CF clear if successful
CF set on error (table full)
02h NOP???
Return: EBX = 00000000h
03h ???
Return: ZF clear
SeeAlso: #01295,#01297,INT 2F/AX=1684h/BX=0032h
--------W-20----Vx0033-----------------------
INT 20 P - Microsoft Windows - CONFIGMG - VxD SERVICES
VxD = 0033h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01297)
Values for CONFIGMG (VxD ID 0033h) service number:
0000h "_CONFIGMG_Get_Version"
0001h "_CONFIGMG_Initialize"
0002h "_CONFIGMG_Locate_DevNode"
0003h "_CONFIGMG_Get_Parent"
0004h "_CONFIGMG_Get_Child"
0005h "_CONFIGMG_Get_Sibling"
0006h "_CONFIGMG_Get_Device_ID_Size"
0007h "_CONFIGMG_Get_Device_ID"
0008h "_CONFIGMG_Get_Depth"
0009h "_CONFIGMG_Get_Private_DWord"
000Ah "_CONFIGMG_Set_Private_DWord"
000Bh "_CONFIGMG_Create_DevNode"
000Ch "_CONFIGMG_Query_Remove_SubTree"
000Dh "_CONFIGMG_Remove_SubTree"
000Eh "_CONFIGMG_Register_Device_Driver"
000Fh "_CONFIGMG_Register_Enumerator"
0010h "_CONFIGMG_Register_Arbitrator"
0011h "_CONFIGMG_Deregister_Arbitrator"
0012h "_CONFIGMG_Query_Arbitrator_Free_Size"
0013h "_CONFIGMG_Query_Arbitrator_Free_Data"
0014h "_CONFIGMG_Sort_NodeList"
0015h "_CONFIGMG_Yield"
0016h "_CONFIGMG_Lock"
0017h "_CONFIGMG_Unlock"
0018h "_CONFIGMG_Add_Empty_Log_Conf"
0019h "_CONFIGMG_Free_Log_Conf"
001Ah "_CONFIGMG_Get_First_Log_Conf"
001Bh "_CONFIGMG_Get_Next_Log_Conf"
001Ch "_CONFIGMG_Add_Res_Des"
001Dh "_CONFIGMG_Modify_Res_Des"
001Eh "_CONFIGMG_Free_Res_Des"
001Fh "_CONFIGMG_Get_Next_Res_Des"
0020h "_CONFIGMG_Get_Performance_Info"
0021h "_CONFIGMG_Get_Res_Des_Data_Size"
0022h "_CONFIGMG_Get_Res_Des_Data"
0023h "_CONFIGMG_Process_Events_Now"
0024h "_CONFIGMG_Create_Range_List"
0025h "_CONFIGMG_Add_Range"
0026h "_CONFIGMG_Delete_Range"
0027h "_CONFIGMG_Test_Range_Available"
0028h "_CONFIGMG_Dup_Range_List"
0029h "_CONFIGMG_Free_Range_List"
002Ah "_CONFIGMG_Invert_Range_List"
002Bh "_CONFIGMG_Intersect_Range_List"
002Ch "_CONFIGMG_First_Range"
002Dh "_CONFIGMG_Next_Range"
002Eh "_CONFIGMG_Dump_Range_List"
002Fh "_CONFIGMG_Load_DLVxDs"
0030h "_CONFIGMG_Get_DDBs"
0031h "_CONFIGMG_Get_CRC_CheckSum"
0032h "_CONFIGMG_Register_DevLoader"
0033h "_CONFIGMG_Reenumerate_DevNode"
0034h "_CONFIGMG_Setup_DevNode"
0035h "_CONFIGMG_Reset_Children_Marks"
0036h "_CONFIGMG_Get_DevNode_Status"
0037h "_CONFIGMG_Remove_Unmarked_Children"
0038h "_CONFIGMG_ISAPNP_To_CM"
0039h "_CONFIGMG_CallBack_Device_Driver"
003Ah "_CONFIGMG_CallBack_Enumerator"
003Bh "_CONFIGMG_Get_Alloc_Log_Conf"
003Ch "_CONFIGMG_Get_DevNode_Key_Size"
003Dh "_CONFIGMG_Get_DevNode_Key"
003Eh "_CONFIGMG_Read_Registry_Value"
003Fh "_CONFIGMG_Write_Registry_Value"
0040h "_CONFIGMG_Disable_DevNode"
0041h "_CONFIGMG_Enable_DevNode"
0042h "_CONFIGMG_Move_DevNode"
0043h "_CONFIGMG_Set_Bus_Info"
0044h "_CONFIGMG_Get_Bus_Info"
0045h "_CONFIGMG_Set_HW_Prof"
0046h "_CONFIGMG_Recompute_HW_Prof"
0047h "_CONFIGMG_Query_Change_HW_Prof"
0048h "_CONFIGMG_Get_Device_Driver_Private_DWord"
0049h "_CONFIGMG_Set_Device_Driver_Private_DWord"
004Ah "_CONFIGMG_Get_HW_Prof_Flags"
004Bh "_CONFIGMG_Set_HW_Prof_Flags"
004Ch "_CONFIGMG_Read_Registry_Log_Confs"
004Dh "_CONFIGMG_Run_Detection"
004Eh "_CONFIGMG_Call_At_Appy_Time"
004Fh "_CONFIGMG_Fail_Change_HW_Prof"
0050h "_CONFIGMG_Set_Private_Problem"
0051h "_CONFIGMG_Debug_DevNode"
0052h "_CONFIGMG_Get_Hardware_Profile_Info"
0053h "_CONFIGMG_Register_Enumerator_Function"
0054h "_CONFIGMG_Call_Enumerator_Function"
0055h "_CONFIGMG_Add_ID"
0056h "_CONFIGMG_Find_Range"
0057h "_CONFIGMG_Get_Global_State"
0058h "_CONFIGMG_Broadcast_Device_Change_Message"
0059h "_CONFIGMG_Call_DevNode_Handler"
005Ah "_CONFIGMG_Remove_Reinsert_All"
Note: the VxD services appear to be identical to the PM/V86 APIs on
INT 2F/AX=1684h
SeeAlso: #01296,#01299,INT 2F/AX=1684h/BX=0033h
--------W-20----Vx0034-----------------------
INT 20 P - Microsoft Windows - DWCFGMG.SYS - VxD SERVICES
VxD = 0034h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01298)
Values for DWCFGMG.SYS (VxD ID 0034h) service number:
00h "CM_GetVersion" get supported DDI version
Return: EAX = 00000000h if not installed
else
AH = major version number
AL = minor version number
EBX = number of devices controlled by DWCFGMG.SYS
01h "CM_GetConfig" get device configuration
EBX = device index
EDI -> buffer for configuration information (see #02675)
Return: EAX = status (0000h successful, 0001h index out of range)
02h "CM_LockConfig" lock device configuration
EDI -> configuration information (see #02675)
Return: EAX = status
0000h successful
0001h resource conflict
0002h invalid request
03h "CM_UnlockConfig" unlock device configuration
EDI -> configuration information (see #02675)
Return: EAX = status (0000h successful, 0001h invalid request)
04h "CME_QueryResources"
05h "CME_AllocResources"
06h "CME_DeallocResources"
SeeAlso: INT 2F/AX=1684h/BX=0034h
--------W-20----Vx0036-----------------------
INT 20 P - Microsoft Windows - VFBACKUP - VxD SERVICES
VxD = 0036h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01299)
Values for VFBACKUP (VxD ID 0036h) service number:
0000h get version
Return: CF clear
EAX = version (AH = major, AL = minor)
0001h "VFBACKUP_Lock_NEC"
0002h "VFBACKUP_UnLock_NEC"
0003h "VFBACKUP_Register_NEC"
0004h "VFBACKUP_Register_VFD"
0005h "VFBACKUP_Lock_All_Ports"
SeeAlso: #01297,#01300
--------W-20----Vx0037-----------------------
INT 20 P - Microsoft Windows - VMINI / ENABLE - VxD SERVICES
VxD = 0037h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01300)
Values for VMINI / ENABLE (VxD ID 0037h) service number:
0000h get version
Return: CF clear
EAX = version (AH = major, AL = minor)
0001h "VMINI_Update"
??? (performs VMMCall 1800Eh, then falls through to service 04h)
Return: EAX = system time???
0002h "VMINI_Status"
get current ???
Return: EAX = ???
0003h "VMINI_DisplayError" (schedules a global event via VMMCall 1800Eh)
Return: ???
0004h "VMINI_SetTimeStamp" (performs VMMCall 100CFh)
Return: EAX = system time
0005h "VMINI_Siren" (call ??? priority event)
Return: nothing
0006h "VMINI_RegisterAccess" (set ??? / get ???)
EDI -> buffer containing data to copy into VxD and space for results
Return: EDI buffer updated
0007h "VMINI_GetData"
EBX = ??? flags (bits 2,15,17,18 checked)
EDI -> ???
???
Return: ???
0008h "VMINI_ShutDownItem" (schedules a global event via VMMCall 1800Eh)
Return: ???
0009h "VMINI_RegisterSK" (get ??? data)
EDI -> buffer for data (see #01301)
Return: EDI buffer updated if large enough
SeeAlso: #01299,#01302,#02677 at INT 2F/AX=1684h/BX=0037h
Format of ENABLE.VXD ??? data:
Offset Size Description (Table 01301)
00h DWORD (ret) length of data, including this word
(call) length of buffer
04h DWORD -> 24-byte (or larger) buffer
08h DWORD -> 20-byte buffer
0Ch DWORD -> 260-byte buffer
10h DWORD -> 260-byte buffer
SeeAlso: #01300
--------W-20----Vx0038-----------------------
INT 20 P - Microsoft Windows - VCOND - VxD SERVICES
VxD = 0038h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01302)
Values for VCOND (VxD ID 0038h) service number:
0000h get VCOND version
Return: CF clear
EAX = version (AH = major, AL = minor)
0001h "VCOND_Launch_ConApp_Inherited"
SeeAlso: #01303,#01300,#01304
(Table 01303)
Values for Windows95 VCOND (Vxd ID 0038h) Win32 service number:
00h get VCOND version
Return: EAX = version (AH = major, AL = minor)
...
34h ...last Win32 service for Windows95 SP1
SeeAlso: #01302
--------W-20----Vx003D-----------------------
INT 20 P - Microsoft Windows - BIOS - VxD SERVICES
VxD = 003Dh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01304)
Values for BIOS (VxD ID 003Dh) service number:
00h get version???
01h ???
02h ???
03h ???
SeeAlso: #01302,#01305
--------W-20----Vx003E-----------------------
INT 20 P - Microsoft Windows - WSOCK - VxD SERVICES
VxD = 003Eh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01305)
Values for WSOCK (VxD ID 003Eh) service number:
00h get WSOCK version
Return: CF clear
AH = major version
AL = minor version
EAX high word = 0000h
01h ???
EAX = ??? or 00000000h
Return: CF clear if successful
EAX = 00000000h
CF set on error
EAX = ???
02h ???
EAX = ??? or 00000000h
Return: ???
03h ???
04h ...last service for Windows95 SP1
SeeAlso: #01304,#01306
--------W-20----Vx0040-----------------------
INT 20 P - Microsoft Windows - IFSMgr - VxD SERVICES
VxD = 0040h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01306)
Values for IFSMGR (VxD ID 0040h) service number:
00h get version
01h "RegisterMount"
02h "RegisterNet"
03h "RegisterMailSlot"
04h "Attach"
05h "Detach"
06h "Get_NetTime"
07h "Get_DOSTime"
08h "SetupConnection"
09h "DerefConnection"
0Ah "ServerDOSCall"
0Bh "CompleteAsync"
0Ch "RegisterHeap"
0Dh "GetHeap"
0Eh "RetHeap"
0Fh "CheckHeap"
10h "CheckHeapItem"
11h "FillHeapSpare"
12h "Block"
13h "Wakeup"
14h "Yield"
15h "SchedEvent"
16h "QueueEvent"
17h "KillEvent"
18h "FreeIOReg"
19h "MakeMailSlot"
1Ah "DeleteMailSlot"
1Bh "WriteMailSlot"
1Ch "PopUp"
1Dh "printf"
1Eh "AssertFailed"
1Fh "LogEntry"
20h "DebugMenu"
21h "DebugVars"
22h "GetDebugString"
23h "GetDebugHexNum"
24h "NetFunction"
25h "DoDelAllUses"
26h "SetErrString"
27h "GetErrString"
28h "SetReqHook"
29h "SetPathHook"
2Ah "UseAdd"
2Bh "UseDel"
2Ch "InitUseAdd"
2Dh "ChangeDir"
2Eh "DelAllUses"
2Fh "CDROM_Attach"
30h "CDROM_Detach"
31h "Win32DupHandle"
32h "Ring0_FileIO"
33h "Toggle_Extended_File_Handle"
34h "IFSMgr_GetDrive_Info"
35h "IFSMgr_Ring0GetDriveInfo"
36h "IFSMgr_BlockNoEvents"
37h "IFSMgr_NetToDosTime"
38h "IFSMgr_DosToNetTime"
39h "IFSMgr_DosToWin32Time"
3Ah "IFSMgr_Win32ToDosTime"
3Bh "IFSMgr_NetToWin32Time"
3Ch "IFSMgr_Win32ToNetTime"
3Dh "IFSMgr_MetaMatch"
3Eh "IFSMgr_TransMatch"
3Fh "IFSMgr_CallProvider"
40h "UniToBCS"
41h "UniToBCSPath"
42h "BCSToUni"
43h "UniToUpper"
44h "UniCharToOEM"
45h "CreateBasis"
46h "MatchBasisName"
47h "AppendBasisTail"
48h "FcbToShort"
49h "ShortToFcb"
4Ah "IFSMgr_ParsePath"
4Bh "Query_PhysLock"
4Ch "_VolFlush"
4Dh "NotifyVolumeArrival"
4Eh "NotifyVolumeRemoval"
4Fh "QueryVolumeRemoval"
50h "IFSMgr_FSDUnmountCFSD"
51h "IFSMgr_GetConversionTablePtrs"
52h "IFSMgr_CheckAccessConflict"
53h "IFSMgr_LockFile"
54h "IFSMgr_UnlockFile"
55h "IFSMgr_RemoveLocks"
56h "IFSMgr_CheckLocks"
57h "IFSMgr_CountLocks"
58h "IFSMgr_ReassignLockFileInst"
59h "IFSMgr_UnassignLockList"
5Ah "IFSMgr_MountChildVolume"
5Bh "IFSMgr_UnmountChildVolume"
5Ch "IFSMgr_SwapDrives"
5Dh "IFSMgr_FSDMapFHtoIOREQ"
5Eh "IFSMgr_FSDParsePath"
5Fh "IFSMgr_FSDAttachSFT"
60h "IFSMgr_GetTimeZoneBias"
61h "IFSMgr_PNPEvent"
62h "IFSMgr_RegisterCFSD"
63h "IFSMgr_Win32MapExtendedHandleToSFT"
64h "IFSMgr_DbgSetFileHandleLimit"
65h "IFSMgr_Win32MapSFTToExtendedHandle"
66h "IFSMgr_FSDGetCurrentDrive"
67h "IFSMgr_InstallFileSystemApiHook"
68h "IFSMgr_RemoveFileSystemApiHook"
69h "IFSMgr_RunScheduledEvents"
6Ah "IFSMgr_CheckDelResource"
6Bh "IFSMgr_Win32GetVMCurdir"
6Ch "IFSMgr_SetupFailedConnection"
6Dh "_GetMappedErr"
6Eh "ShortToLossyFcb"
6Fh "IFSMgr_GetLockState"
70h "BcsToBcs"
71h "IFSMgr_SetLoopback"
72h "IFSMgr_ClearLoopback"
73h "IFSMgr_ParseOneElement"
74h "BcsToBcsUpper"
SeeAlso: #01305,#01307
--------W-20----Vx0041-----------------------
INT 20 P - Microsoft Windows - VCDFSD - VxD SERVICES
VxD = 0041h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01307)
Values for VCDFSD (VxD ID 0041h) service number:
00h get VCDFSD version???
01h ???
02h ???
03h ???
SeeAlso: #01306,#01308
--------W-20----Vx0048-----------------------
INT 20 P - Microsoft Windows - PERF - VxD SERVICES
VxD = 0048h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01308)
Values for PERF (VxD ID 0048h) service number:
00h get version
Return: CF clear
EAX = version (AH = major, AL = minor)
01h "PERF_Server_Register"
(creates/sets a registry key for the server)
02h "PERF_Server_Deregister"
end performance monitoring (deletes registry key for server)
03h "PERF_Server_Add_Stat"
start performance monitoring (creates/sets a registry key)
04h "PERF_Server_Remove_Stat"
end performance monitoring (deletes registry key)
SeeAlso: #01307,#01311,#01309
--------W-20----Vx004A-----------------------
INT 20 P - Microsoft Windows - MTRR - VxD SERVICES
VxD = 004Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01309)
Values for MTRR (VxD ID 004Ah) service number:
00h get version
01h ??? (highest service defined for Win95B)
SeeAlso: #01308,#01310
--------W-20----Vx004B-----------------------
INT 20 P - Microsoft Windows - NTKERN - VxD SERVICES
VxD = 004Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01310)
Values for NTKERN (VxD ID 004Bh) service number:
00h get version???
...
08h ??? (highest service defined for Win95B)
SeeAlso: #01309,#01311
--------W-20----Vx011F-----------------------
INT 20 P - Microsoft Windows - VFLATD - VxD SERVICES
VxD = 011Fh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01311)
Values for VFLATD (VxD ID 011Fh) service number:
00h get VFLATD version???
01h ???
SeeAlso: #01308,#01312
--------W-20----Vx0449-----------------------
INT 20 P - Microsoft Windows - vjoyd - VxD SERVICES
VxD = 0449h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01312)
Values for vjoyd (VxD ID 0449h) service number:
00h get vjoyd version???
01h ???
SeeAlso: #01311,#01313
--------W-20----Vx044A-----------------------
INT 20 P - Microsoft Windows - mmdevldr - VxD SERVICES
VxD = 044Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01313)
Values for mmdevldr (VxD ID 044Ah) service number:
00h get mmdevldr version???
01h ???
02h ???
03h ???
04h ???
05h ???
SeeAlso: #01312,#01314
--------W-20----Vx0480-----------------------
INT 20 P - Microsoft Windows - VNetSup - VxD SERVICES
VxD = 0480h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01314)
Values for VNetSup (VxD ID 0480h) service number:
00h get VNetSup version???
01h ???
02h ???
03h ???
04h ???
05h ???
06h ???
SeeAlso: #01313,#01315
--------W-20----Vx0481-----------------------
INT 20 P - Microsoft Windows - VREDIR - VxD SERVICES
VxD = 0481h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01315)
Values for VREDIR (VxD ID 0481h) service number:
0000h "VRedir_Get_Version"
0001h "VRedir_Register"
0002h "VRedir_MakeMailSlot"
0003h "VRedir_DeleteMailSlot"
0004h "VRedir_ServerEnum"
0010h ...last service for Windows95 SP1
SeeAlso: #01314,#01316
--------W-20----Vx0483-----------------------
INT 20 P - Microsoft Windows - VSHARE - VxD SERVICES
VxD = 0483h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01316)
Values for VSHARE (VxD ID 0483h) service number:
00h get VSHARE version???
SeeAlso: #01315,#01317
--------W-20----Vx0487-----------------------
INT 20 P - Microsoft Windows - NWLINK - VxD SERVICES
VxD = 0487h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01317)
Values for NWLINK (VxD ID 0487h) service number:
00h get NWLINK version???
01h ???
06h ...last service for Windows95 SP1
SeeAlso: #01316,#01318,#02642
--------W-20----Vx0488-----------------------
INT 20 P - Microsoft Windows - VTDI - VxD SERVICES
VxD = 0488h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01318)
Values for VTDI (VxD ID 0488h) service number:
00h get VTDI version???
01h ???
08h get ???
seen called with DWORD -> ASCIZ "MSTCP" on stack, returning EAX=???
0Dh ...last service for Windows95 SP1
SeeAlso: #01317,#01319
--------W-20----Vx0489-----------------------
INT 20 P - Microsoft Windows - VIP - VxD SERVICES
VxD = 0489h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01319)
Values for VIP (VxD ID 0489h) service number:
00h get VIP version???
01h ???
05h ???
06h ???
returns EAX=0/1
08h ...last service for Windows95 SP1
---Frontier Technologies' FTCVIP---
09h ???
returns EAX=1
SeeAlso: #01318,#01320
--------W-20----Vx048A-----------------------
INT 20 P - Microsoft Windows - MSTCP - VxD SERVICES
VxD = 048Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01320)
Values for MSTCP (VxD ID 048Ah) service number:
00h get MSTCP version???
SeeAlso: #01319,#01321
--------W-20----Vx048B-----------------------
INT 20 P - Microsoft Windows - VCACHE - VxD SERVICES
VxD = 048Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01321)
Values for VCACHE (VxD ID 048Bh) service number:
0000h "VCACHE_Get_Version"
0001h "VCACHE_Register"
0002h "VCACHE_GetSize"
0003h "VCACHE_CheckAvail"
0004h "VCACHE_FindBlock"
0005h "VCACHE_FreeBlock"
0006h "VCACHE_MakeMRU"
0007h "VCACHE_Hold"
0008h "VCACHE_Unhold"
0009h "VCACHE_Enum"
000Ah "VCACHE_TestHandle"
000Bh "VCACHE_VerifySums"
000Ch "VCACHE_RecalcSums"
000Dh "VCACHE_TestHold"
000Eh "VCACHE_GetStats"
000Fh "VCache_Deregister"
0010h "VCache_AdjustMinimum"
0011h "VCache_SwapBuffers"
0012h "VCache_RelinquishPage"
0013h "VCache_UseThisPage"
0014h "_VCache_CreateLookupCache"
0015h "_VCache_CloseLookupCache"
0016h "_VCache_DeleteLookupCache"
0017h "_VCache_Lookup"
0018h "_VCache_UpdateLookup"
SeeAlso: #01320,#01322
--------W-20----Vx048E-----------------------
INT 20 P - Microsoft Windows - NWREDIR - VxD SERVICES
VxD = 048Eh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01322)
Values for NWREDIR (VxD ID 048Eh) service number:
00h get NWREDIR version???
01h ???
SeeAlso: #01321,#01323
--------W-20----Vx0491-----------------------
INT 20 P - Microsoft Windows - FILESEC - VxD SERVICES
VxD = 0491h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01323)
Values for FILESEC (VxD ID 0491h) service number:
00h get FILESEC version???
01h ???
10h ...last service for Windows95 SP1
SeeAlso: #01322,#01324
--------W-20----Vx0492-----------------------
INT 20 P - Microsoft Windows - NWSERVER - VxD SERVICES
VxD = 0492h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01324)
Values for NWSERVER (VxD ID 0492h) service number:
00h get NWSERVER version???
01h ???
02h ???
03h ???
SeeAlso: #01323,#01325
--------W-20----Vx0493-----------------------
INT 20 P - Microsoft Windows - MSSP / NWSP - VxD SERVICES
VxD = 0493h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01325)
Values for MSSP/NWSP (VxD ID 0493h) service number:
00h get NSSP / NWSP version???
01h ???
06h ...last service for Windows95 SP1
SeeAlso: #01324,#01326
--------W-20----Vx0494-----------------------
INT 20 P - Microsoft Windows - NSCL - VxD SERVICES
VxD = 0494h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01326)
Values for NSCL (VxD ID 0494h) service number:
00h get NSCL version???
01h ???
02h ???
SeeAlso: #01325,#01327
--------W-20----Vx0495-----------------------
INT 20 P - Microsoft Windows - AFVXD - VxD SERVICES
VxD = 0495h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01327)
Values for AFVXD (VxD ID 0495h) service number:
00h get version
Return: CF clear
AX = version (AH = high, AL = low)
01h ???
EAX -> ???
EBX -> ???
ECX = ???
Return: ???
02h ???
EAX -> ???
Return: ???
SeeAlso: #01326,#01328
--------W-20----Vx0496-----------------------
INT 20 P - Microsoft Windows - NDIS2SUP - VxD SERVICES
VxD = 0496h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01328)
Values for NDIS2SUP (VxD ID 0496h) service number:
00h get NDIS2SUP version???
01h ???
SeeAlso: #01327,#01329
--------W-20----Vx0498-----------------------
INT 20 P - Microsoft Windows - Splitter - VxD SERVICES
VxD = 0498h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01329)
Values for Splitter (VxD ID 0498h) service number:
00h get Splitter version
Return: CF clear
EAX = version (00000001h)
01h ???
02h ???
03h hook/unhook VMM "hook device service" service
EAX = request (0 = unhook, nonzero = hook)
Return: if EAX nonzero on entry, Splitter's service 04h replaces VMM
service 0090h; otherwise, default handler is restored
04h Splitter "hook device service" handler
SeeAlso: #01328,#01330
--------W-20----Vx0499-----------------------
INT 20 P - Microsoft Windows - PPPMAC - VxD SERVICES
VxD = 0499h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01330)
Values for PPPMAC (VxD ID 0499h) service number:
00h ???
09h ...last service for Windows95 SP1
SeeAlso: #01329,#01331,#02642
--------W-20----Vx049A-----------------------
INT 20 P - Microsoft Windows - VDHCP - VxD SERVICES
VxD = 049Ah
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01331)
Values for VDHCP (VxD ID 049Ah) service number:
00h get VDHCP version???
01h ???
02h ???
03h ???
SeeAlso: #01330,#01332
--------W-20----Vx049B-----------------------
INT 20 P - Microsoft Windows - VNBT - VxD SERVICES
VxD = 049Bh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01332)
Values for VNBT (VxD ID 049Bh) service number:
00h get VNBT version???
SeeAlso: #01331,#01333
--------W-20----Vx049D-----------------------
INT 20 P - Microsoft Windows - LOGGER - VxD SERVICES
VxD = 049Dh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01333)
Values for LOGGER (VxD ID 049Dh) service number:
00h get LOGGER version???
01h ???
02h ???
03h ???
04h ???
SeeAlso: #01332,#01334
--------W-20----Vx097C-----------------------
INT 20 P - Microsoft Windows - PCCARD - VxD SERVICES
VxD = 097Ch
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier (see #02642)
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01334,#01340
(Table 01334)
Values for PCCARD (VxD ID 097Ch) service number:
0000h "PCCARD_Get_Version"
0001h "PCCARD_Card_Services"
SeeAlso: #01333,#01337
----------20----Vx3048-----------------------
INT 20 P - Frontier Technologies ??? - VxD SERVICES
VxD = 3048h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01335
(Table 01335)
Values for ??? (VxD ID 3048h) service number:
00h get version???
03h ???
called with 5 DWORDs on stack, returns EAX=???, ECX nonzero on error
04h ???
called with DWORD on stack, returns EAX=???, ECX nonzero on error
06h ???
called with DWORD on stack, returns EAX=???, ECX nonzero on error
07h ???
called with 3 DWORDs on stack, returns EAX=???, ECX nonzero on error
0Bh ???
called with 2 DWORDs on stack, returns EAX=???, ECX nonzero on error
0Ch ???
called with 2 DWORDs on stack, returns EAX=???, ECX nonzero on error
0Dh ???
called with 6 DWORDs on stack, returns EAX=???, ECX nonzero on error
1Ah ???
called with 3 DWORDs on stack
SeeAlso: #01336
----------20----Vx3049-----------------------
INT 20 P - Frontier Technologies ??? - VxD SERVICES
VxD = 3049h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01336
(Table 01336)
Values for ??? (VxD ID 3049h) service number:
00h get version???
1Dh ???
called with 2 DWORDs on stack; returns EAX=???, ECX nonzero on error
1Eh ???
called with 6 DWORDs on stack; returns EAX=???, ECX nonzero on error
SeeAlso: #01335
--------W-20----Vx3098-----------------------
INT 20 P - QEMM - VstlthD - VxD SERVICES
VxD = 3098h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01337)
Values for VStlthD (VxD ID 3098h) service number:
00h get version
Return: CF clear
EAX = version (AH = major, AL = BCD minor)
01h ???
02h get current ???
Return: CF clear
EDX = current value of ???
03h ???
SeeAlso: #01334,#01338
--------W-20----Vx30F6-----------------------
INT 20 P - Microsoft Windows - WSVV - VxD SERVICES
VxD = 30F6h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01338)
Values for WSVV (VxD ID 30F6h) service number:
00h get WSVV version???
SeeAlso: #01337,#01339
--------W-20----Vx33FC-----------------------
INT 20 P - Microsoft Windows - ASPIENUM - VxD SERVICES
VxD = 33FCh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01339)
Values for ASPIENUM (VxD ID 33FCh) service number:
00h get ASPIENUM version???
01h ???
02h ???
03h ???
SeeAlso: #01338,#01340
--------W-20----Vx357E-----------------------
INT 20 P - Microsoft Windows - DSOUND - VxD SERVICES
VxD = 357Eh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01340)
Values for DSOUND (VxD ID 357Eh) service number:
00h get DSOUND version???
01h ???
02h ???
SeeAlso: #01339,#01341
--------W-20----Vx39E6-----------------------
INT 20 P - Microsoft Windows - A3D - VxD SERVICES
VxD = 39E6h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01341)
Values for A3D (VxD ID 39E6h) service number:
00h get version???
01h ???
02h ??? (highest service defined)
SeeAlso: #01340,#01342
--------W-20----Vx3BFD-----------------------
INT 20 P - Microsoft Windows - CWCPROXY - VxD SERVICES
VxD = 3BFDh
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01342)
Values for CWCPROXY (VxD ID 3BFDh) service number:
00h get version???
...
03h ??? (highest service defined)
SeeAlso: #01341,#01343
--------W-20----Vx3C78-----------------------
INT 20 P - Microsoft Windows - VGARTD - VxD SERVICES
VxD = 3C78h
Note: the desired VxD and service number are identified by the data
immediately following the INT 20 instruction, as in:
INT 20h
DW service number
DW VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340
(Table 01343)
Values for VGARTD (VxD ID 3C78h) service number:
00h get version???
...
05h ??? (highest service defined)
SeeAlso: #01342,#02642
--------G-21---------------------------------
INT 21 - COMTROL HOSTESS i/ISA DEBUGGER - GET SEGMENT FOR CONTROL PROGRAM USE
???
Return: AX = first segment available for control program use
SeeAlso: INT 20"COMTROL",INT 22"COMTROL"
--------D-2100-------------------------------
INT 21 - DOS 1+ - TERMINATE PROGRAM
AH = 00h
CS = PSP segment
Notes: Microsoft recommends using INT 21/AH=4Ch for DOS 2+
this function sets the program's return code (ERRORLEVEL) to 00h
execution continues at the address stored in INT 22 after DOS performs
whatever cleanup it needs to do (restoring the INT 22,INT 23,INT 24
vectors from the PSP assumed to be located at offset 0000h in the
segment indicated by the stack copy of CS, etc.)
if the PSP is its own parent, the process's memory is not freed; if
INT 22 additionally points into the terminating program, the
process is effectively NOT terminated
not supported by MS Windows 3.0 DOSX.EXE DOS extender
SeeAlso: AH=26h,AH=31h,AH=4Ch,INT 20,INT 22
--------D-2101-------------------------------
INT 21 - DOS 1+ - READ CHARACTER FROM STANDARD INPUT, WITH ECHO
AH = 01h
Return: AL = character read
Notes: ^C/^Break are checked, and INT 23 executed if read
^P toggles the DOS-internal echo-to-printer flag
^Z is not interpreted, thus not causing an EOF if input is redirected
character is echoed to standard output
standard input is always the keyboard and standard output the screen
under DOS 1.x, but they may be redirected under DOS 2+
SeeAlso: AH=06h,AH=07h,AH=08h,AH=0Ah
--------v-21010F-----------------------------
INT 21 - VIRUS - "Susan" - INSTALLATION CHECK
AX = 010Fh
Return: AX = 7553h ("Su") if resident
SeeAlso: INT 16/AH=DDh"VIRUS",INT 21/AX=0B56h
--------D-2102-------------------------------
INT 21 - DOS 1+ - WRITE CHARACTER TO STANDARD OUTPUT
AH = 02h
DL = character to write
Return: AL = last character output (despite the official docs which state
nothing is returned) (at least DOS 2.1-7.0)
Notes: ^C/^Break are checked, and INT 23 executed if pressed
standard output is always the screen under DOS 1.x, but may be
redirected under DOS 2+
the last character output will be the character in DL unless DL=09h
on entry, in which case AL=20h as tabs are expanded to blanks
if standard output is redirected to a file, no error checks (write-
protected, full media, etc.) are performed
SeeAlso: AH=06h,AH=09h
--------D-2103-------------------------------
INT 21 - DOS 1+ - READ CHARACTER FROM STDAUX
AH = 03h
Return: AL = character read
Notes: keyboard checked for ^C/^Break, and INT 23 executed if detected
STDAUX is usually the first serial port
SeeAlso: AH=04h,INT 14/AH=02h,INT E0/CL=03h
--------D-2104-------------------------------
INT 21 - DOS 1+ - WRITE CHARACTER TO STDAUX
AH = 04h
DL = character to write
Notes: keyboard checked for ^C/^Break, and INT 23 executed if detected
STDAUX is usually the first serial port
if STDAUX is busy, this function will wait until it becomes free
SeeAlso: AH=03h,INT 14/AH=01h,INT E0/CL=04h
--------D-2105-------------------------------
INT 21 - DOS 1+ - WRITE CHARACTER TO PRINTER
AH = 05h
DL = character to print
Notes: keyboard checked for ^C/^Break, and INT 23 executed if detected
STDPRN is usually the first parallel port, but may be redirected under
DOS 2+
if the printer is busy, this function will wait
SeeAlso: INT 17/AH=00h
--------D-2106-------------------------------
INT 21 - DOS 1+ - DIRECT CONSOLE OUTPUT
AH = 06h
DL = character (except FFh)
Return: AL = character output (despite official docs which state nothing is
returned) (at least DOS 2.1-7.0)
Notes: does not check ^C/^Break
writes to standard output, which is always the screen under DOS 1.x,
but may be redirected under DOS 2+
SeeAlso: AH=02h,AH=09h
--------D-2106--DLFF-------------------------
INT 21 - DOS 1+ - DIRECT CONSOLE INPUT
AH = 06h
DL = FFh
Return: ZF set if no character available
AL = 00h
ZF clear if character available
AL = character read
Notes: ^C/^Break are NOT checked
if the returned character is 00h, the user pressed a key with an
extended keycode, which will be returned by the next call of this
function
this function reads from standard input, which is always the keyboard
under DOS 1.x, but may be redirected under DOS 2+
although the return of AL=00h when no characters are available is not
documented, some programs rely on this behavior
SeeAlso: AH=0Bh
--------D-2107-------------------------------
INT 21 - DOS 1+ - DIRECT CHARACTER INPUT, WITHOUT ECHO
AH = 07h
Return: AL = character read from standard input
Notes: does not check ^C/^Break
standard input is always the keyboard under DOS 1.x, but may be
redirected under DOS 2+
if the interim console flag is set (see AX=6301h), partially-formed
double-byte characters may be returned
SeeAlso: AH=01h,AH=06h,AH=08h,AH=0Ah
--------D-2108-------------------------------
INT 21 - DOS 1+ - CHARACTER INPUT WITHOUT ECHO
AH = 08h
Return: AL = character read from standard input
Notes: ^C/^Break are checked, and INT 23 executed if detected
standard input is always the keyboard under DOS 1.x, but may be
redirected under DOS 2+
if the interim console flag is set (see AX=6301h), partially-formed
double-byte characters may be returned
SeeAlso: AH=01h,AH=06h,AH=07h,AH=0Ah,AH=64h"DOS 3.2+"
--------D-2109-------------------------------
INT 21 - DOS 1+ - WRITE STRING TO STANDARD OUTPUT
AH = 09h
DS:DX -> '