💾 Archived View for dangerouswiki.capsule.town › faq.gmi captured on 2023-03-20 at 17:25:16. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-03-01)
-=-=-=-=-=-=-
_________ ____
/ ____/ | / __ \
/ /_ / /| |/ / / /
/ __/ / ___ / /_/ /
/_/ /_/ |_\___\_\
1. Enter the terminal by pressing F4 on the keyboard or access it via SSH.
2. enter ` curl https://download.argon40.com/argon1.sh | bash `
3. Customize fan speeds via ` argonone-config `
4. Uninstall with ` argonone-uninstall `
[Files and Locations](guides/retropie/locations.md)
_Answered by @MPoxon_
Reinstall bluez
1. ` sudo apt --autoremove purge bluez `
2. ` sudo apt install bluez `
When a game asks for it, you can change the current disk in the RetroArch Disc Control menu:
1. Eject the current disk with Eject Disc
2. Select the right disk index with Current Disc Index
3. Insert the new disk with Insert Disc
The above is for games which don't allow multi disk drive support.
To disable a specific overlay the manual way, Atari 2600 will be used as an example.
1. ` nano opt/retropie/configs/atari2600/retroarch.cfg `
2. comment the following line:
` input_overlay = "/opt/retropie/emulators/retroarch/overlays/RickDangerous/exodus_cl-speakersonly.cfg" `
by inserting a hash:
` #input_overlay = "/opt/retropie/emulators/retroarch/overlays/RickDangerous/exodus_cl-speakersonly.cfg" `
Atari 2600 will be used as an example again to expain how to use a different overlay for a system.
From above it is seen that the current overlay is exodus_cl-speakersonly
It can be changed to a new overlay for example generic_atari2600_border
1. disable the previous overlay
2. enter ` input_overlay = "/opt/retropie/emulators/retroarch/overlays/RickDangerous/generic_atari2600_border.cfg" `
3. move the config file ` generic_atari2600_border.cfg `
aswell as the overlay file ` generic_atari2600_border.png `
to ` /opt/retropie/emulators/retroarch/overlays/RickDangerous/ `
4. if the downloaded overlay does not have a .cfg file it easily can be created
or another one can be copied and renamed to generic_atari2600_border.cfg
4.1 To create a new one open your favourite text editor (e.g. "notepad++" or in terminal "nano")
4.2 Enter:
` overlays = 1 `
` overlay0_overlay = generic_atari2600_border.png `
` overlay0_full_screen = true `
` overlay0_descs = 0 `
4.3 save as generic_atari2600_border.cfg (in this example)
This can be done using the EmulationStation configuration editor in the options menu
1. Configure basic libretro emulator options
2. Configure additional options for example Atari 2600 overlay set to false to disable or true to enable
Wrong HDMI port: The Raspberry Pi 4 has two HDMI ports. The connector on the left marked 'HDMI0' is the primary/default display. If you're using just 1 screen you'll need to use this one.
If there is no display on startup with either hdmi:
With some models of TV you may have to undertake a bit of 'trial and error' with the config.txt video settings.
There's a great Raspberry Pi article here detailing these settings on [raspberrypi.org](https://www.raspberrypi.org/documentation/configuration/config-txt/video.md)
Changing hdmi_safe to 1 is a good first step, then go from there.
Set your timezone/location
When you first set up a Raspberry Pi, sometimes you'll need to manually set the timezone/location to allow you to make a WiFi connection (even though the initial setup screens appear to set this for you).
1. In a terminal window type in ` sudo raspi-config `,
2. then ` Localisation Options `
3. then set your locale, timezone and WLAN country.
See also [ThePiHut Support](https://support.thepihut.com/hc/en-us/articles/360014695877-Raspberry-Pi-won-t-connect-to-WiFi)
[RickDangerous' Setup](hardware/ricks_setup.md)
_Answered by @kerrz_
Dreamcast:
1. Connect a keyboard.
2. Start a Dreamcast game
3. Hit ESC on your keyboard to Redream menu.
4. Use W, A, S and D to navigate and L to select options (or use your controller).
5. Go to INPUT > Port A/ Controller 0 > Main menu (if pushed by mistake you can resume) or Exit Emulator to get directly back to EmulationStation.
6. Choose the button to your liking. I chose the "Select" button for this, as it is not in use.
Pushing "select" inside a game will now get the main menu up, and you can exit from there.
PSP:
1. Connect a keyboard.
2. Start a PSP game
3. Hit ESC on your keyboard to PPSSPP menu.
4. Use Arrow keys to navigate and Enter to select options (or use your controller).
5. Go to SETTINGS > Controls > Control mapping.
6. Scroll down to "Pause", press "+" and choose the button to your liking that you want to use for exiting to the emulator.
Check that the button you choose is not used for other things.
[Hotkeys](guides/emulationstation/hotkeys.md)
_Answered by @Rafamate_
If you need to setup controllers from scratch and cannot use controller(s); using a keyboard you can go to:
1. RetroPie
2. RetroPie Setup
3. Manage Configurations
4. EmulationStation
5. Clear input Configuration
_Answered by @Rafamate_
In EmulationStation, enter the Collection you want to add (or remove) games to. Press select and choose "add games to this collection", you can then navigate around different systems and add games by pressing Y button.
Once you're happy with the games you've added, make sure you press Select again and choose "Finish editing collection", in order to save it.
Be sure to shutdown properly or restart emulationstation to ensure it is kept next time you start your retropie!
1. When loading the game press X or A on your controller.
2. Goto select ROM for the emulator (make sure just ROM).
3. Try lr-nestopia (if nes game) or another emulator.
4. Start the game and see if it performs better.
If you can't access that menu when booting a game it means run command is disabled.
1. Options
2. runcommand
3. configuration
4. make sure launch menu is set to enabled.
The simple short answer is: when in emulationstation, press F4 and write the following lines:
1. check if an update exist:
` sudo rpi-eeprom-update `
2. if update exist, type in these two lines to install the update:
` sudo rpi-eeprom-update -a `
` sudo reboot `
More info about eeprom on [raspberrypi.org](https://www.raspberrypi.org/documentation/computers/raspberry-pi.html#raspberry-pi-4-boot-eeprom)
Initially, the pi will try to boot from the sd card. If nothing there, it will check if there is anything connected via usb that can boot up. So, if you do not change any boot config, your pi will boot from ssd if sd slot is empty, and when sd card is inserted, the pi will boot from there.
I use [Skraper](http://skraper.net/)
I use [WinSCP](https://winscp.net/eng/index.php)
_Answered by @QUIZASERAQ_
There is no root password set by default so root login via cyberpunk or transmit on mac is not possible.
There are tutorials on how to set one but u should backup before.
Quick steps:
SFTP logging into RetroPie (with terminal or TRANSIT on a Mac)
Log in (via remote terminal or on PI iteslf):
1. open Terminal Session
type: ssh pi@yo.ur.i.p
type: raspberry
Now change root password
2. type: sudo nano /etc/ssh/sshd_config
3. change:
'#PermitRootLogin prohibit-password' to 'PermitRootLogin yes'
4. type: sudo passwd root
5. type in your new root password
6. retype it
7. type: reboot
Now you can log in to your pi as root with Transit, using the new password.
Please always stop quit ES (by pressing F4 on connected keyboard | typing 'kill $(pidof emulationstation)' in remote terminal) before altering any files or uploading new roms and media/gamelists!!! otherwise your existing gamelists may be corrupted!!!
_Answered by @kerrz_
To enable REWIND in most games (Hotkey + L trigger):
OPTIONS > Retroarch (steps 1-2-3 below start on main menu):
1. Settings > Inputs > Hotkeys
a. Rewind - set to L trigger button (L shoulder is occupied for load state).
b. Enable hotkeys - set to your hotkey ("select")
2. Settings > Frame Throttle > Rewind > Rewind Support
a. Change the Buffer Size (MB) to around 100.
3. Configuration File > Save Current Configuration
If you are not sure how trigger and shoulder buttons was defined, you can do it again; from the main theme, press Start and choose Configure Input.
1. open Windows Powershell
2. go to the folder where your image file is present
3. in that folder, write: "Get-FileHash filename.img -Algorithm MD5"
4. Wait. This will take a lot of time. When finished, a number will show, which is the MD5 checksum.
Or you can find the MD5 checksum (and others) of your image file utilizing Hashtab [implbits](http://implbits.com/) - thanks to _@share-and-enjoy_.
If the link above does not work, try this: [cnet](https://download.cnet.com/HashTab/3000-2094_4-84837.html)
When Hashtab is installed, you go to the image file in windows explorer, right click it >> Properties >> Hash tab.
Depending on the size of the file and your computer, it will take some time to calculate the MD5 and SHA1.
[Boot from USB](guides/beginning/boot.md)
_Answered by @kerrz_
Save files are located in:
` home/pi/RetroPie/saves/<system> `
0. Options
1. Arcade type systems by alphabet
2. Consoles and handhelds type systems by manufacture - alphabetical order (Nintendo, Sega...)
2.1 Within each manufacture; by year
3. Computers by alphabet
4. Genres by alphabet