💾 Archived View for sdf.org › cuteascii1 › sneaknetti84.gmi captured on 2023-03-20 at 18:40:31. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Lyncia

Localnet/Sneakernet with TI84+

To begin

This does require a cable of sorts, either:

2.55mm cord, both ends male.
Some sort of official cable I guess, ask TI
Mini-USB cable, both ends male
A normal Mini-USB cable + an OTG adapter (one end female USB-A)

and another calc to transfer the data to, obviously.

To Send

On the sender calc, make sure you are on the home screen (blinking prompt). Then, press 2ND + "X,T,0,N" (button just right of the green Alpha key). The link menu should show up and you can choose the data you wish to send from there.

To Recieve

On the recieving calc, do the same steps shown in "To Send" to get to the Link menu. Then use the left and right arrow buttons to tab over to "RECIEVE", then press the Enter or 1 key.