💾 Archived View for uscoffings.net › retro-computing › systems › Tandy › t › pro300.txt captured on 2023-03-20 at 20:31:32.
⬅️ Previous capture (2022-06-04)
-=-=-=-=-=-=-
For those using the Radio Shack 300 Baud Internal Modem with
Procomm 2.4.2, the following settings work for at least one
person:
Line Settings (Alt-P):
1) Modem Set-Up--
1) Modem initiation string... *c*mg^@\fdt
2) Dialing command... *fdt
3) Dialing cmd suffix... *x
4) Connect string... CONNECT
5) No Connect string 1... BUSY
6) No Connect string 2... VOICE
7) No Connect string 3... NO CARRIER
8) No Connect string 4...
9) Hangup string... ^T
10) Redial timeout delay... 30
11) Redial pause delay... 2
2) Terminal Set-Up--
1) Terminal emulation... ANSI-BBS
2) Duplex... FULL
3) Flow control... NONE
4) CR translation (in)... CR
5) CR translation (out)... CR
6) BS translation... DEST
7) BS key definition... BS
8) Line wrap... OFF
9) Scroll... ON
10) Break length (ms)... 350
11) Enquiry (Ctrl-E)... OFF
4) General Set-Up--
1) Editor name...
2) Default d/l path...
3) Default log file... PROCOMM.LOG
4) Screen dump file... PROCOMM.IMG
5) Screen write method... DIRECT
6) Translate table... OFF
7) Sound effects... ON
8) Alarm sound... ON
9) Alarm time (secs)... 2
10) Exploding windows... YES
11) XMODEM mode... RELAXED
12) Xlat pause chracter... ~
13) Xlat CR character... !
14) Xlat CTRL character... ^
15) Xlat ESC character... |
16) Aborted downloads... KEEP
17) Transmit pacing (ms)... 50
Any recommendations, corrections, or tested modifications are
welcomed.--Joe Miller, 76257,2652
\ex