💾 Archived View for gmi.noulin.net › mobileNews › 3119.gmi captured on 2023-01-29 at 19:28:19. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
2011-05-24 06:33:32
Artist's representation of OFDM process (D Hillerkuss/KIT-IPQ) A wide array of
data strings can be encoded within a single laser's pulse
Researchers have set a new record for the rate of data transfer using a single
laser: 26 terabits per second.
At those speeds, the contents of nearly 1,000 high-definition DVDs could be
sent down an optical fibre in a second.
The trick is to use what is known as a "fast Fourier transform" to unpick more
than 300 separate colours of light in a laser beam, each encoded with its own
string of information.
The technique is described in the journal Nature Photonics.
The push for higher data rates in light-based telecommunications technologies
has seen a number of significant leaps in recent years.
While the earliest optical fibre technologies encoded a string of data as
"wiggles" within a single colour of light sent down a fibre, newer approaches
have used a number of tricks to increase data rates.
Among them is what is known as "orthogonal frequency division multiplexing",
which uses a number of lasers to encode different strings of data on different
colours of light, all sent through the fibre together.
At the receiving end, another set of laser oscillators can be used to pick up
these light signals, reversing the process.
Check the pulse
While the total data rate possible using such schemes is limited only by the
number of lasers available, there are costs, says Wolfgang Freude, a co-author
of the current paper from the Karlsruhe Institute of Technology in Germany.
"Already a 100 terabits per second experiment has been demonstrated," he told
BBC News.
"The problem was they didn't have just one laser, they had something like 370
lasers, which is an incredibly expensive thing. If you can imagine 370 lasers,
they fill racks and consume several kilowatts of power."
Professor Freude and his colleagues have instead worked out how to create
comparable data rates using just one laser with exceedingly short pulses.
Within these pulses are a number of discrete colours of light in what is known
as a "frequency comb".
When these pulses are sent into an optical fibre, the different colours can mix
together and create 325 different colours in total, each of which can be
encoded with its own data stream.
Last year, Professor Freude and his collaborators first demonstrated how to use
a smaller number of these colours to transmit over 10 terabits per second.
At the receiving end, traditional methods to separate the different colours
will not work. In the current experiment, the team sent their signals down 50km
of optical fibre and then implemented what is known as an optical fast Fourier
transform to unpick the data streams.
Colours everywhere
The Fourier transform is a well-known mathematical trick that can in essence
extract the different colours from an input beam, based solely on the times
that the different parts of the beam arrive, and at what intensity.
Light escaping from optical fibre The authors say the technique can be easily
integrated into existing silicon photonics technology
The team does this optically - rather than mathematically, which at these data
rates would be impossible - by splitting the incoming beam into different paths
that arrive at different times.
In this way, stringing together all the data in the different colours turns
into the simpler problem of organising data that essentially arrive at
different times.
Professor Freude said that the current design outperforms earlier approaches
simply by moving all the time delays further apart, and that it is a technology
that could be integrated onto a silicon chip - making it a better candidate for
scaling up to commercial use.
He concedes that the idea is a complex one, but is convinced that it will come
into its own as the demand for ever-higher data rates drives innovation.
"Think of all the tremendous progress in silicon photonics," he said. "Nobody
could have imagined 10 years ago that nowadays it would be so common to
integrate relatively complicated optical circuits on to a silicon chip."